# This is the common part of all startup scripts
# It is included by all generated scripts

# The following variables should be set before:
# * IOC      the system name of the ioc
# * INSTBASE where to boot from
# * SLSBASE  alias for INSTBASE
# * EPICS    the epics release (e.g "R3.13.9")
# * ARCH     the vxWorks architecture (e.g. "T1-ppc604")

# Accept SLSBASE or INSTBASE
PBASE=0
symFindByName(sysSymTbl,"INSTBASE",&PBASE,0)
symFindByName(sysSymTbl,"SLSBASE",&PBASE,0)
SLSBASE=*PBASE
INSTBASE=*PBASE

STRINGBUFFER=malloc(256)

# set the prompt
sprintf (STRINGBUFFER, "%s (startup.script aborted) > ", IOC)
shellPromptSet (STRINGBUFFER)

# create some path variables
HOME=malloc(80)
sprintf (HOME, "/ioc/%s", IOC)

CFG=malloc(80)
sprintf (CFG, "%s/cfg", HOME)

STREAM_PROTOCOL_DIR=malloc(80)
sprintf (STREAM_PROTOCOL_DIR, "%s/cfg", HOME)

LIB=malloc(80)
sprintf (LIB, "%s/iocBoot/%s/%s", INSTBASE, EPICS, ARCH)

TEMPLATES=malloc(80)
sprintf (TEMPLATES, ".:%s/iocBoot/templates", INSTBASE)

# Router for SLS machine net (fails otherwise but that's ok)
routeAdd ("0.0.0.0","172.20.10.1")

# setup mount points (try both possible locations for /ioc)
hostAdd ("slsfs","129.129.145.52")
nfsMount (&sysBootHost, "/home/ioc", "/home/ioc")
nfsMount (&sysBootHost, "/ioc", "/ioc")
nfsMount ("slsfs", "/export/csa/releases/ioc", "/ioc")
nfsMount ("slsfs","/export/csa/releases/work","/work")
nfsMount ("slsfs","/export/csa/releases/prod","/prod")
nfsMount ("slsfs","/export/csa/releases/devl","/devl")
nfsMount ("slsfs","/export/exchange","/exchange")

# All T2-code is compiled with -mlongcall. Thus enable extended memory.
memAddToPool (sysMemTop(),sysPhysMemTop()-sysMemTop())
EXTENDED_MEMORY=0

#Load EPICS version dependent script
sprintf (STRINGBUFFER, "%s/iocBoot/startup/%s", INSTBASE, EPICS)
ioGlobalStdSet (0, open (STRINGBUFFER, 0, 0))
#startup script contiues at <INSTBASE>/iocBoot/startup/<EPICS>