work in progress; simple easyGet worked!!!

example/configure/CONFIG

@@ -0,0 +1,29 @@
+# CONFIG - Load build configuration data
+#
+# Do not make changes to this file!
+
+# Allow user to override where the build rules come from
+RULES = $(EPICS_BASE)
+
+# RELEASE files point to other application tops
+include $(TOP)/configure/RELEASE
+-include $(TOP)/configure/RELEASE.$(EPICS_HOST_ARCH).Common
+ifdef T_A
+-include $(TOP)/configure/RELEASE.Common.$(T_A)
+-include $(TOP)/configure/RELEASE.$(EPICS_HOST_ARCH).$(T_A)
+endif
+
+CONFIG = $(RULES)/configure
+include $(CONFIG)/CONFIG
+
+# Override the Base definition:
+INSTALL_LOCATION = $(TOP)
+
+# CONFIG_SITE files contain other build configuration settings
+include $(TOP)/configure/CONFIG_SITE
+-include $(TOP)/configure/CONFIG_SITE.$(EPICS_HOST_ARCH).Common
+ifdef T_A
+ -include $(TOP)/configure/CONFIG_SITE.Common.$(T_A)
+ -include $(TOP)/configure/CONFIG_SITE.$(EPICS_HOST_ARCH).$(T_A)
+endif
+

example/configure/CONFIG_SITE

@@ -0,0 +1,27 @@
+# CONFIG_SITE
+
+# Make any application-specific changes to the EPICS build
+#   configuration variables in this file.
+#
+# Host/target specific settings can be specified in files named
+#   CONFIG_SITE.$(EPICS_HOST_ARCH).Common
+#   CONFIG_SITE.Common.$(T_A)
+#   CONFIG_SITE.$(EPICS_HOST_ARCH).$(T_A)
+
+# CHECK_RELEASE controls the consistency checking of the support
+#   applications pointed to by the RELEASE* files.
+# Normally CHECK_RELEASE should be set to YES.
+# Set CHECK_RELEASE to NO to disable checking completely.
+# Set CHECK_RELEASE to WARN to perform consistency checking but
+#   continue building anyway if conflicts are found.
+CHECK_RELEASE = WARN
+
+# To install files into a location other than $(TOP) define
+#   INSTALL_LOCATION here.
+#INSTALL_LOCATION=</path/name/to/install/top>
+
+INSTALL_INCLUDE = $(INSTALL_LOCATION)/include/pv
+USR_INCLUDES += -I $(INSTALL_LOCATION)/include
+
+-include $(TOP)/../../CONFIG_SITE.local
+-include $(TOP)/../configure/CONFIG_SITE.local

example/configure/ExampleRELEASE.local

@@ -0,0 +1,7 @@
+EPICS_BASE=/home/install/epics/base
+TEMPLATE_TOP=$(EPICS_BASE)/templates/makeBaseApp/top
+EPICSV4HOME=/home/hg
+PVCOMMON=${EPICSV4HOME}/pvCommonCPP
+PVDATA=${EPICSV4HOME}/pvDataCPP
+PVACCESS=${EPICSV4HOME}/pvAccessCPP
+EASYPVA==${EPICSV4HOME}/easyPVACPP

example/configure/Makefile

@@ -0,0 +1,8 @@
+TOP=..
+
+include $(TOP)/configure/CONFIG
+
+TARGETS = $(CONFIG_TARGETS)
+CONFIGS += $(subst ../,,$(wildcard $(CONFIG_INSTALLS)))
+
+include $(TOP)/configure/RULES

example/configure/RELEASE

@@ -0,0 +1,41 @@
+# pvDatabaseCPP/example RELEASE - Location of external support modules
+#
+# IF YOU CHANGE this file or any file it includes you must
+# subsequently do a "gnumake rebuild" in the application's
+# top level directory.
+#
+# The build process does not check dependencies against files
+# that are outside this application, thus you should also do a
+# "gnumake rebuild" in the top level directory after EPICS_BASE
+# or any other external module pointed to below is rebuilt.
+#
+# Host- or target-specific settings can be given in files named
+#  RELEASE.$(EPICS_HOST_ARCH).Common
+#  RELEASE.Common.$(T_A)
+#  RELEASE.$(EPICS_HOST_ARCH).$(T_A)
+
+# EPICS V4 Developers: Do not edit the locations in this file!
+#
+# Create a file RELEASE.local pointing to your PVASRV, PVACCESS,
+# PVDATA, PVCOMMON and EPICS_BASE build directories, e.g.
+#   PVASRV   = /path/to/epics/pvaSrvCPP
+#   PVACCESS = /path/to/epics/pvAccessCPP
+#   PVDATA   = /path/to/epics/pvDataCPP
+#   PVCOMMON = /path/to/epics/pvCommonCPP
+#   EPICS_BASE = /path/to/epics/base
+
+# If this example is built in a directory under pvDatabaseCPP,
+# use the following definitions:
+
+EASYPVA = $(TOP)/..
+
+-include $(TOP)/../configure/RELEASE.local
+-include $(TOP)/../../RELEASE.local
+
+# If you copied this example from pvDatabaseCPP to be built as a
+# standalone TOP, adjust and use the following definitions:
+
+#EASYPVA = /path/to/epics/easyPVACPP
+
+#-include $(TOP)/../RELEASE.local
+#-include $(TOP)/configure/RELEASE.local

example/configure/RULES

@@ -0,0 +1,6 @@
+# RULES
+
+include $(CONFIG)/RULES
+
+# Library should be rebuilt because LIBOBJS may have changed.
+$(LIBNAME): ../Makefile

example/configure/RULES.ioc

@@ -0,0 +1,2 @@
+#RULES.ioc
+include $(CONFIG)/RULES.ioc

example/configure/RULES_DIRS

@@ -0,0 +1,2 @@
+#RULES_DIRS
+include $(CONFIG)/RULES_DIRS

example/configure/RULES_TOP

@@ -0,0 +1,3 @@
+#RULES_TOP
+include $(CONFIG)/RULES_TOP
+