.\" @(#)templatefile.5 1 93/11/04 SMI;
.TH TEMPLATEFILE 5 "04 Nov 1993"
.SH NAME
templatefile \- The file containing rules for substitutions.
.SH DESCRIPTION
.LP
This file contains the rules for performing substitutions on ".db" files.
.sp
The purpose of this file is to specify a set of substitutions to be
performed on a file.  Substitutions can be defined in one of two ways.
The general format for substitution 
sets is defined as follows:
.nf
.sp
.B *Version-1*
file name.db {
    { set1var1=sub1, set1var2=sub2,...... }
    { set2var1=sub1, set2var2=sub2,...... }
    { set3var1=sub1, set3var2=sub2,...... }
}
\.
\.
\.

- or -

.B *Version-2*
file name.db {
    pattern{ var1,var2,var3,....... }
    { sub1_for_set1, sub2_for_set1, sub3_for_set1, ... }
    { sub1_for_set2, sub2_for_set2, sub3_for_set2, ... }
    { sub1_for_set3, sub2_for_set3, sub3_for_set3, ... }
}
\.
\.
\.
.fi
.sp
Each braced line represents an entire variable substitution for the input
file.  The input file will have each set applied to it to produce 
one composite file with all the completed substitutions in it.
Interpreting version 1 should be obvious, for version 2, the variables
are listed in the "pattern{}" line, which must precede the braced
substitution lines.  The braced substitution lines contains set which
match up with the pattern{} line.  An example will be given later.
.sp
The keyword file identifies a
.B dbfile(5)
to perform the substitutions on, in this case "name.db".
.SH EXAMPLES
Four simple template file examples are listed here, the first two are 
IOC db specific, the last two are general ones.  All the examples
specify the same substitutions to perform: this=sub1 and that=sub2 for a
first set, and this=sub3 and that=sub4 for a second set.
.nf

1) file test.db { { this=sub1,that=sub2 } { this=sub3,that=sub4 } }
2) file test.db { pattern{this,that} {sub1,sub2} {sub3,sub4 } }

input file for 1 and 2 (see dbfile(5) for examplanation of file):

database(test)
{
	record(ai,"$(this)record") { field(DESC,"this = $(this)") }
	record(ai,"$(that)record") { field(DESC,"this = $(that)") }
}

.fi
When 1 and 2 are applied to their corresponding file, two sets of the
record() lines will be produced: (sub1record,sub2record) and (sub3record,
sub4record), see dbLoadTemplate(1) for a more thorough explanation.
.SH NOTES
No special spacing or carriage returns are required in this file.
.SH "SEE ALSO"
.BR dbLoadTemplate(1),
.BR dbLoadTemplate(3),