#	$Id$
#	Author:	Andrew Johnson
#	Date:	20 April 1995
#
#	Experimental Physics and Industrial Control System (EPICS)
#
#	CONFIG_ENV - EPICS Environment Parameter configuration file
#
# This file is interpreted by the Bourne Shell, so spaces are 
# not allowed around the '=' signs or in unquoted values.
# Makefile variables are not defined here.
#
# Note: This file is read by base/src/libCom/bldEnvdata.pl,
# so the variable definitions in here should be kept 'simple':
#	VAR=VALUE
# each one on a single line.
#


#  Default environment settings

# Channel Access:
# EPICS_CA_ADDR_LIST augment beacon/search dest ip addr list
#	from white space separated ip addresses in this
#	environment variable. "Quote" if more than one addr.
# EPICS_CA_AUTO_ADDR_LIST YES = augment beacon/search dest ip
#	addr list from network interfaces found; NO = only use
#	EPICS_CA_ADDR_LIST to create this list.
# EPICS_CA_CONN_TMO sec before sending echo request from client.
# EPICS_CA_REPEATER_PORT CA repeater port number.
# EPICS_CA_SERVER_PORT CA server port number.

EPICS_CA_ADDR_LIST=""
EPICS_CA_AUTO_ADDR_LIST=YES
EPICS_CA_CONN_TMO=30.0
EPICS_CA_REPEATER_PORT=5065
EPICS_CA_SERVER_PORT=5064

#
# These parameters are only used by the CA server library
#
# EPICS_CA_BEACON_PERIOD quiescent sec between server beacons.
# EPICS_CAS_INTF_ADDR_LIST - list of IP addresses identifying
#	a limited set of interfaces that the server should bind to.
#	If this parameter is empty then connections are accepted
#	from any interface. Beacons are sent only to the broadcast
#	address of each interface in this list (or the destination 
#	address of point to point interfaces) if EPICS_CA_AUTO_ADDR_LIST
#	is YES. Type "ifconfig -a" in order to determine which 
# 	interfaces are available.
# EPICS_CAS_BEACON_ADDR_LIST - If this parameter is specified
#	or if EPICS_CAS_INTF_ADDR_LIST isnt empty then this parameter
#	is used instead of EPICS_CA_ADDR_LIST by the server library 
# 	to augment the list of addresses to send beacons to.
# EPICS_CAS_SERVER_PORT - If this parameter is specified then it
#	and not EPICS_CA_SERVER_PORT is used to determine the server's
# 	port number.
#
EPICS_CA_BEACON_PERIOD=15.0
EPICS_CAS_INTF_ADDR_LIST=""
EPICS_CAS_BEACON_ADDR_LIST=""
EPICS_CAS_SERVER_PORT=


# Log Server:
# EPICS_IOC_LOG_PORT Log server port number etc.
EPICS_IOC_LOG_PORT=7004
#EPICS_IOC_LOG_INET=""
#EPICS_IOC_LOG_FILE_LIMIT=100000
#EPICS_IOC_LOG_FILE_NAME=/a/b/c/d/iocs.log

# Other services:

EPICS_CMD_PROTO_PORT=
EPICS_AR_PORT=7002