RSRV now honors EPICS_CAS_INTF_ADDR_LIST and binds only to the provided list +of network interfaces. Name searches (UDP and TCP) on other network interfaces +are ignored. For example on a computer with interfaces 10.5.1.1/24, 10.5.2.1/24, +and 10.5.3.1/24, setting "EPICS_CAS_INTF_ADDR_LIST='10.5.1.1 10.5.2.1'" will +accept traffic on the .1.1 and .2.1, but ignore from .3.1
+ +RSRV now honors EPICS_CAS_IGNORE_ADDR_LIST and ignores UDP messages received +from addresses in this list.
+ +Previously, CA servers (RSRV and PCAS) would build the beacon address list +using EPICS_CA_ADDR_LIST if EPICS_CAS_BEACON_ADDR_LIST was no set. This is no +longer done. Sites depending on this should set both envronment variables to the +same value.
+ +libca, RSRV, and PCAS may now use IPv4 multicasting for UDP traffic (name +search and beacons). This is disabled by default. To enable multicast address(s) +must be listed in EPICS_CA_ADDR_LIST for clients and EPICS_CAS_INTF_ADDR_LIST +for servers (IOCs should set both). For example: +"EPICS_CAS_INTF_ADDR_LIST='224.0.2.9' EPICS_CA_ADDR_LIST=224.0.2.9".
+ +Please note that no IPv4 multicast address is officially assigned for Channel +Access by IANA. The example 224.0.2.9 is taken from the AD-HOC Block I range.
+
The bitwise operators in the CALC engine have been modified to work properly @@ -66,35 +93,6 @@ dbQuietMacroWarnings=1 VxWorks
RSRV now honors EPICS_CAS_INTF_ADDR_LIST and binds to only -the provided list of network interfaces. -Name searches (UDP and TCP) on other network interfaces are ignored. -For example on a computer with interfaces 10.5.1.1/24, 10.5.2.1/24, and 10.5.3.1/24, -setting "EPICS_CAS_INTF_ADDR_LIST='10.5.1.1 10.5.2.1'" will accept traffic -on the .1.1 and .2.1, but ignore from .3.1
- -RSRV now honors EPICS_CAS_IGNORE_ADDR_LIST and ignores -UDP messages received from addresses in this list.
- -Previously, CA servers (RSRV and PCAS) would build the beacon address list -using EPICS_CA_ADDR_LIST if EPICS_CAS_BEACON_ADDR_LIST was no set. -This is no longer done. -Sites depending on this should set both envronment variables to the same value.
- -libca, RSRV, and PCAS may now use IPv4 multicasting for UDP traffic (name search and beacons). -This is disabled by default. -To enable multicast address(s) must be listed in EPICS_CA_ADDR_LIST for clients -and EPICS_CAS_INTF_ADDR_LIST for servers (IOCs should set both). -For example: "EPICS_CAS_INTF_ADDR_LIST='224.0.2.9' EPICS_CA_ADDR_LIST=224.0.2.9". -
- -Please note that no IPv4 multicast address is officially assigned for Channel Access by IANA. -The example 224.0.2.9 is taken from the AD-HOC Block I range.
-
Recent versions of VxWorks (sometime after VxWorks 6) provide facilities for