base Root directory of the base distribution
- base/config R3.13 compatibility build configuration files
- base/config/tools Perl and shell scripts used in the R3.13 build
base/configure Operating system independent build config files
base/configure/os Operating system dependent build config files
- base/configure/tools Perl and shell scripts used in the build
base/documentation Distributation documentation
base/src All epics base source code in subdirectories
base/src/RTEMS Code to configure RTEMS for EPICS
@@ -186,7 +183,6 @@
base/src/tools Perl scripts used during the builds
base/src/toolsComm Code for the build tools antelope and e_flex
base/src/util Utilities (ca_test, iocLogServer, startCArepeater)
- base/src/vxWorks R3.13 compatibility code specific to vxWorks
base/startup Scripts for setting up path and environment
@@ -270,7 +266,6 @@
CONFIG.UnixCommon.Common Definitions for Unix hosts and all targets
CONFIG.Common.UnixCommon Definitions for Unix targets and all hosts
CONFIG.Common.vxWorksCommon Specific host definitions for all vx targets
- CONFIG_COMPAT R3.13 arch compatibility definitions
CONFIG_SITE.<host>.<target> Site specific host-target definitions
CONFIG_SITE.Common.<target> Site specific target defs for all hosts
CONFIG_SITE.<host>.Common Site specific host defs for all targets
@@ -311,15 +306,15 @@ Files in the base/startup directory have been provided to
help set required path and other environment variables.
EPICS_HOST_ARCH
- Before you can build or use EPICS R3.14, the environment variable
+ Before you can build or use EPICS R3.15, the environment variable
EPICS_HOST_ARCH must be defined. A perl script EpicsHostArch.pl in the
base/startup directory has been provided to help set EPICS_HOST_ARCH.
You should have EPICS_HOST_ARCH set to your host operating system
followed by a dash and then your host architecture, e.g. solaris-sparc.
If you are not using the OS vendor's c/c++ compiler for host builds,
you will need another dash followed by the alternate compiler name
- (e.g. "-gnu" for GNU c/c++ compilers on a solaris host or "-borland"
- for Borland c/c++ compilers on a WIN32 host). See configure/CONFIG_SITE
+ (e.g. "-gnu" for GNU c/c++ compilers on a solaris host or "-mingw"
+ for MinGW c/c++ compilers on a WIN32 host). See configure/CONFIG_SITE
for a list of supported EPICS_HOST_ARCH values.
PERLLIB
@@ -336,23 +331,16 @@ Files in the base/startup directory have been provided to
solaris systems you need uname in your path.
LD_LIBRARY_PATH
- It is no longer necessary to have LD_LIBRARY_PATH include EPICS
- directories on a Unix type system. R3.14 shared libraries and
- executables will contain the full path name to libraries they require.
- However, if you move the EPICS directories from their build-time
- location then in order for libraries to be found at runtime
- LD_LIBRARY_PATH must include the full pathname to
- $(INSTALL_LOCATION)/lib/$(EPICS_HOST_ARCH) when invoking executables.
- Building shared libraries is now the default setting for all Unix type
- hosts. NOTE: You will still need LD_LIBRARY_PATH for R3.13 extension
- shared libraries even if the R3.13 extensions are built with R3.14
- base.
Win32 PATH
- On WIN32 systems, for R3.14.7 and later, it is no longer necessary
- to add fullpathname to $(INSTALL_LOCATION)/bin/$(EPICS_HOST_ARCH) to
- your path for finding dlls during EPICS builds. The win32 configure
- files in base now add this directory to the path definition.
- Instructions for building and executing the 3.14 example application + Instructions for building and executing the 3.15 example application can be found in the section "Example Application" of Chapter 2, "Getting Started", in the "IOC Application Developer's Guide" for this release. The "Example IOC Application" section briefly explains how to diff --git a/documentation/RELEASE_NOTES.html b/documentation/RELEASE_NOTES.html index d1f3eae29..08266cc58 100644 --- a/documentation/RELEASE_NOTES.html +++ b/documentation/RELEASE_NOTES.html @@ -3,3382 +3,29 @@
-The following are links to bugs in the Launchpad bug tracker that have been -fixed in this release:
++These files are now found under src/RTEMS.
-Base can now built with shared libraries on Cygwin 1.7.x, although only with -the gcc-3 compiler. Cygwin 1.5.x only works when compiled without shared -libraries (set STATIC_BUILD=YES and SHARED_LIBRARIES=NO in -configure/CONFIG_SITE). There is code in Base now that depends on the -Cygwin version, so make sure that you rebuild Base if you upgrade your Cygwin -installation.
++Removed the 3.13 <top>/config directory and build compatibility rules and variables, and +various conversion documents.
-epicsEvent is now explicitly required to act as a simple binary semaphore. -A single epicsEventSignal call must awaken just one thread when multiple -threads are waiting for the event. A test that checks for this has been -added to epicsEventTest and the Application Developer's Guide has been updated -to describe this requirement.
- -It is now possible to put an array into the VAL field of a soft channel -subArray record whose INP field is empty. Processing the record then causes the -sub-array extraction process to be done on the current VAL array. This can be -used to feed a sequence of values into some other record (set INDX=1 and -NELM=MALM and read one element out of the VAL field each time).
- -64-bit binaries for Microsoft Windows platforms can now be built using the -target architecture windows-x64, which is also a valid cross-build target for a -win32-x86 host. We do not currently support or recommend trying to use 64-bit -builds on MinGW or Cygwin.
- -Kazuro Furukawa has been unable to compile EPICS Base on this target for the -last few releases and it's not really needed any more, so the targets have been -deleted from this release.
- -The calc and calcout records can now accept infix expressions up to 79 -characters long, although you have to use long string support to read or write -any that are more than 39 characters. The postfix interpreter now sports an -integer literal token as well as the double literal one, which reduces the -maximum size of a postfix buffer needed for any specific size of infix buffer by -a factor of 2/3.
- -Tom Pelaia II and Mark Engbretson contributed build configuration files to -cross-compile Base for Apple's iOS operating system as used in the iPhone and -iPad. The target architecture for these is ios-arm, and there is also an ios-x86 -target which compiles for the iPhone Simulator running on darwin-x86.
- -To build these for iOS, uncomment the CROSS_COMPILER_TARGET_ARCHS -definition in configure/os/CONFIG_SITE.darwin-x86.Common and check the -settings in configure/os/CONFIG_SITE.Common.iosCommon.
- -Dynamic array sizing was developed by Michael Abbott at the 2010 EPICS -Codeathon. It permits a CA client to fetch only the currently valid elements of -an array by specifying a COUNT of zero to either of the ca_array_get_callback() -or ca_create_subscription() routines. It has never before been legal to pass a -COUNT of zero to the ca_array_get_callback() routine, but this development does -introduce a subtle change to the published API of the ca_create_subscription() -routine.
- -In previous releases a COUNT of zero for a subscription meant use the -ca_element_count() for the channel, but from this release it can return fewer -elements (never more), at the behest of the server. The number of elements can -vary with subsequent array update events, so a client that uses this technique -must use the count field of the event_handler_args in its callback function each -time it is called to obtain the correct element count from the server. Note that -the ca_element_count() value for a channel is only updated at connection time, -and supplies the maximum number of elements that the server array variable can -hold.
- -Dynamic arrays are currently only supported by the CA client library and IOC -server RSRV, the Perl CA library and the catools programs. The portable CAS does -not understand them, and database links that connect over CA do not attempt to -use them either. CA clients that try to use this functionality with a server -that does not support it will receive the same full-sized zero-filled arrays -that previous releases supported.
- -Merged the CA-over-TCP changes developed by Ralph and Jeff at the 2008 EPICS -Codeathon for the CA client library and both servers (CAS and RSRV). This adds -a new CA configuration variable CA_NAME_SERVERS which is used by the -client library as a list of host names or addresses of CA servers to be -connected to and queried over TCP sockets. This can be used to tunnel CA -connections over ssh. See the CA reference manual for more details.
- -This Perl program attempts to replicate the behaviour of the IOC command -'dbpr' over Channel Access, printing the fields and values of the named record. -Run capr.pl -h for usage information.
- -The fields DTYP and INP/OUT can now be specified in any order in a database -instance (.db) file.
- -Michael Davidsaver suggested a better implementation of epicsThreadOnce() -which makes it possible for all architectures to detect recursive initialization -functions. This change also renames the routines to remove the original macro, -and fixes some questionable usage in places.
- -Record types were not setting many 'last value' fields at initialization, -assuming that the VAL field would always hold the default value and thus not -giving correct initial monitor behavior in some circumstances.
- -Fixed a crash when ALG (algorithm) was changed to Average at runtime.
- -Variable definitions in a configure/RELEASE file may now use the -:= or ?= assignment syntax. Release file processing now -prints a warning if an include file can't be not found (use -include if -this is expected) or if an undefined macro is used, and aborts if a circular -definition is expanded. The variable EPICS_HOST_ARCH can now be used, -but target-architecture-specific values must be set in a target-specific -configure/RELEASE file such as RELEASE.Common.linux-x86.
- -Added build support for the latest Wind River releases. This does not -include the ability to run on SMP vxWorks systems though, those will need some -more extensive modifications.
- -Added support for the latest release of RTEMS. There is no longer a -distinction between executive and malloc memory pools. The new mount() API -is used.
- -Changes to the way in which we generate header dependency files, which are -now named with a .d suffix instead of .depends. We now use -the compiler to generate these where possible, and create them in the -O.$(T_A) directory.
- -We now install libraries and other non-executable files with mode 444 rather -than 644.
- -In some circumstances a string received from CA might not have been properly -zero-terminated; this has now been fixed. CA::create_subscription() -would not accept a zero for the subscription array length; this is now -permitted, in the underlying CA API this means use the native length from the -server.
- -Different Linux distributions have different requirements when linking -readline; some need -lcurses, others -lncurses and others -don't require either. The configure/os/CONFIG_SITE.Common.linux-* -files now make this configuration easy to choose between different settings for -the COMMANDLINE_LIBRARY variable. If your build fails as it's trying -to create the antelope binary in the Base directory -src/toolsComm/antelope/O.arch this is almost certainly the -problem. You will need to do a make rebuild from the top of Base after -fixing the setting of COMMANDLINE_LIBRARY.
- -Three new options were added to the caget and camonitor -utilities, to allow printing float values (rounded) as hex, octal or binary.
- - -A race condition meant that sometimes EPICS programs (including the internal -programs such as flex and antelope) built for Win32 architectures would not -start properly on Windows systems that have multiple CPUs. This race has been -fixed.
- -In order to get GNU make parallel execution (-j option) to work proprely for -multiple target architectures, a new dependency had to be added. Now all -cross-compiled builds depend on their host build. This means that when a -make crosstargetarch command is issued, the EPICS_HOST_ARCH -target build will be executed first, followed by the crosstargetarch -build. Builds done in an O.arch directory will still only build the -arch targets however.
- -Mantis 361 fix - ca_add_fd_registration users might not receive select -wakeup
- -Mantis 359 fix - ca client library flow control mode related issues
- -Mantis 357 fix - high throughput multithreaded ca client appl thread could -be trapped in lib.
- -Mantis 285 fix - CA Documentation doesn't distinguish sync groups from -ca_put_callback()
- -Mantis 346 fix - deleting the chid passed in from within put cb handler -causes failure
- -Mantis 284 fix - channel clear protocol warning messages from PCAS
- -Mantis 237 fix - SEGV from simple CA client during context destroy
- -Mantis 242 fix - invalid DBR type not screened in client library when -doing a put
- -These changes impact the Gateway (Proxy server) and other servers but not -the IOC. - -
Mantis 360 fix - server is unresponsive for one of its clients, when -async io postponed and in flow control mode
- -Mantis 358 fix - PCAS service snap-in has no way to determine if its a put, -or a put calback.
- -Mantis 356 fix - medm display sometimes hangs until the motor stops when -controling motor through gw.
- -Mantis 350 fix - Incoming data corruption under heavy CAS load.
- -Mantis 340 fix - leak when performing a read and conversion fails.
- -Mantis 348 fix - A call to 'assert (item.pList == this)' -failed in ../../../../src/cas/generic/st/ioBlocked.cc line 112
- -Mantis 345 fix - Compilation warning: complaint about missing -gddDestructor
- -Mantis 343 fix - gddScalar::new() operator is not fully thread safe
- -Mantis 333 fix - resTable::removeAll() does not reset the item count
- -Mantis 335 fix - excas fails in clearOutstandingReads - maybe requires an -R3.13 client
- -Mantis 329 fix - GW hang, pthread_mutex_lock failed: error Invalid -argument message
- -Mantis 352 fix - gateway hangs temporarily under heavy load on 8-core -64bit RHEL5
- -Mantis 336 fix - timer queue should have try / catch block around call to -user's expiration callback
- -Mantis 332 fix - epicsTimerTest failure, windows vista 64, dual core -SMP system
- -Mantis 328 fixed - orderly shutdown for soft IOC fails
- -The configuration directory files installed by makeBaseApp.pl have been -changing in recent releases to make them work more like the files in the Base -configuration directory. The CONFIG_APP file has gone, and its functionality is -now performed by the CONFIG file which should only be modified in exceptional -circumstances. The variables that used to be set in the CONFIG file now appear -in the new CONFIG_SITE file, and can be overridden for specific combinations of -host and target architectures by creating a file with name matching one of these -patterns:
- -Note that the setting for CHECK_RELEASE in the CONFIG_SITE files is -not compatible with previous releases of Base; if you are creating an -application that has to work with earlier releases, move the -CHECK_RELEASE setting back to the configure/Makefile where it used to -live.
- -The RELEASE file(s) can now define the variable RULES if you wish -the application to use build rules from some module other than EPICS_BASE. The -rules must appear in a configure subdirectory just like they do in Base.
- -A new macro has been added to epicsAssert.h which performs assertion checks -at compile-time. STATIC_ASSERT(expr) can only be used when -expr can be evaluated by the compiler, and will cause the -compilation to fail if it evaluates to false. The resulting compiler error -message might appear a little obscure, but it does provide some explanation and -contains the line where the failure was discovered. Future versions of the C++ -standard will probably contain a similar facility static_assert(expr, -message) but will require compiler support to be implemented.
- -The definitions for the macros YES, NO, NONE, -min() and max() have been deleted. YES and -NO have been replaced by menuYesNoYES and menuYesNoNO -from the menuYesNo.h file where they were used in several record types. The -other macros were not being used anywhere in Base, sncseq or Asyn.
- -The macro LOCAL that was a synonym for static is now -deprecated and will be deleted in R3.15, please adjust your code to use the -latter keyword. All uses of the READONLY macro from shareLib.h must -now be replaced by the keyword const as the macro has been deleted.
- -The dbDefs.h file was unnecessarily including various other libCom header -files which may have to be manually added to out-of-tree source files that -relied on this. The general rule for header files is that a header should only -include other headers that are needed for its own inclusion in any source file. -The #include statements that might need to be added are:
- -A new macro CONTAINER(pointer, type, member) has been added which -calculates and returns a pointer to the parent structure when given a pointer to -a member, the structure type and the name of the member in that structure. On -GNU compilers the type of the pointer is checked to ensure that it matches the -member, so code using this macro should be built using gcc for additional -confidence.
- -This functionality was replaced by errSymLookup() many releases ago.
- -The Perl CA library has been modified to properly flush the Channel Access -I/O queues when a program using the library exits.
- -The existing Channel Access protocol transports 26 bytes for each ENUM -string, but the fields used to hold ENUM strings in the discrete record types -were configured to be 16 (mbbi/mbbo) or 20 (bi/bo) bytes long. These have all -been increased to match the CA limit.
- -Previous releases that supported HPUX required that EPICS trap and be able to -generate the SIGALRM signal in order to break out of a blocking socket system -call on those systems (Posix only). There were two API routines that had to be -called by any code using sockets to properly support this. Since we no longer -support HPUX this code is no longer required, and as it breaks the Posix timer -interface on Linux it has been disabled in this release. The API routines now do -nothing on all platforms, and will be removed before the 3.15 Release of -Base.
- -It is now possible to configure Base on Darwin to build universal binaries -containing an installation-specific choice of 32- and 64-bit CPU architectures. -This is controlled through the definition of the ARCH_CLASS variable in the -configure/os/CONFIG_SITE.Common.<arch> file for the particular target -architecture you are using (darwin-ppc, darwin-x86 or darwin-ppcx86). There are -comments and example settings in those files. Note that to my knowledge EPICS -Base has not been thoroughly tested on the 64-bit darwin architectures.
- -We have not supported or tested EPICS Base on HPUX for several releases; the -support files for this and other unsupported operating systems have been -removed.
- -The PINI field now has its own menu type with four more choices, -RUN, RUNNING, PAUSE and PAUSED. The earlier -NO and YES values for this field remain as before and cause -the same processing as before. The new values cause records to be processed -during the announcement of the new initHookAtIocRun, -initHookAfterIocRunning, initHookAtIocPause and -initHookAfterIocPaused states respectively.
- -Records with PINI=YES will be processed during the iocBuild -stage of iocInit, follwed by records with PINI=RUN during the -iocRun stage and records with PINI=RUNNING during the -initHookAfterIocRunning stage. If an iocPause command is -given, any records with PINI=PAUSE will be processed at the -initHookAtIocPause stage followed by records with PINI=PAUSED -will be processed at the initHookAfterIocPaused stage. A subsequent -iocRun command causes the PINI=RUN and PINI=RUNNING -records to be processed again.
- -The PHAS field now controls the order in which records are processed as a -result of the PINI mechanism; within each stage, lower values of PHAS are -scanned before higher ones.
- -Several new initHook states have been added which are announced while the IOC -is being paused or restarted. The original states remain unchanged, although a -couple of the later ones are deprecated where using the new states makes more -sense. The enum that defines all the states is now:
- -
-typedef enum {
- initHookAtIocBuild = 0, /* Start of iocBuild/iocInit commands */
- initHookAtBeginning,
- initHookAfterCallbackInit,
- initHookAfterCaLinkInit,
- initHookAfterInitDrvSup,
- initHookAfterInitRecSup,
- initHookAfterInitDevSup,
- initHookAfterInitDatabase,
- initHookAfterFinishDevSup,
- initHookAfterScanInit,
- initHookAfterInitialProcess,
- initHookAfterCaServerInit,
- initHookAfterIocBuilt, /* End of iocBuild command */
-
- initHookAtIocRun, /* Start of iocRun command */
- initHookAfterDatabaseRunning,
- initHookAfterCaServerRunning,
- initHookAfterIocRunning, /* End of iocRun/iocInit commands */
-
- initHookAtIocPause, /* Start of iocPause command */
- initHookAfterCaServerPaused,
- initHookAfterDatabasePaused,
- initHookAfterIocPaused, /* End of iocPause command */
-
-/* Deprecated states, provided for backwards compatibility.
- * These states are announced at the same point they were before,
- * but will not be repeated if the IOC gets paused and restarted.
- */
- initHookAfterInterruptAccept, /* After initHookAfterDatabaseRunning */
- initHookAtEnd, /* Before initHookAfterIocRunning */
-} initHookState;
-
-
-The two deprecated states will only ever be announced once, whereas the newer -ones will repeat as often as the iocPause and iocRun commands -are executed.
- -The (probably unwritten) rules for ai device support have always required -that any device support which sets the VAL field and returns "2" should also -perform any other operations normally performed by the ai's convert() routine. -In practice very few devices did this, but there are some which makes it -impossible to move that smoothing function into the body of the record. This -change adds the support for SMOO filtering to the soft channel device support -for the ai record. The filter is short-circuited when a link recovers from a -failure.
- -Two new options have been introduced as alternatives to the existing NMS and -MS flags: MSI (Maximize Severity INVALID) and MSS (Maximize Severity and -Status).
- -When a link is flagged MSI the receiving record inherits the target's alarm -severity just as it does with the MS flag, but only if that severity is -INVALID.
- -When a link is flagged MSS the receiving record inherits the target's alarm -status as well as its severity, thereby preserving the alarm status through MSS -chains instead of setting that status to LINK.
- -The get_alarm_double() routine in several record types has been changed to -make it easier for CA client applications to display the correct warning and -alarm limits for a record.
- -Originally these routines would always return the current values from the -associated alarm limit fields, but now they will return epicsNAN (not-a-number) -instead if the severity field of the corresponding limit is NO_ALARM. This -allows CA clients to suppress the display of unused limits.
- -Two new math constants have been added to epicsMath.h: epicsNAN -(not a number) and epicsINF (infinity). - -
A new event type (flag in the Channel Access event mask) has been added -to support subscriptions that get events whenever a property of the PV -changes. This will allow clients to get notified on changes of control -limits, graphical limits, state strings etc.
- -The CA commandline tool camonitor and the CA Perl interface support the new -event type. As a first working example, the mbbi and mbbo records have been -extended to send a DBE_PROPERTY event when their status strings are modified. -A more general mechanism to specify sending DBE_PROPERTY events through the DBD -file will appear in 3.15.
- -Client application developers are encouraged to start using DBE_PROPERTY -subscriptions to fetch channel attribute data.
- -The caget/caput/camonitor programs in src/catools now use '\' escape -sequences for non-printable characters.
- -They provide a new option -F to set an output field separator -to be used instead of the default space character.
- -The existing routines used to escape non-printable characters have been -replaced by a new set of functions that are prototyped in the epicsString.h -header file:
- -int epicsStrnRawFromEscaped(char *outbuf, size_t outsize, const char *inbuf, size_t inlen); -epicsShareFunc int epicsStrnEscapedFromRaw(char *outbuf, size_t outsize, const char *inbuf, size_t inlen); -epicsShareFunc size_t epicsStrnEscapedFromRawSize(const char *inbuf, size_t inlen);- -
Both conversion functions take the output buffer (and its size), and the -input buffer (and its size) as argument. They will convert non-printable -characters from/to their '\'-escaped versions. The third function scans a raw -input string and returns the number of characters needed for the escaped -version.
- -The existing function interfaces will be kept for compatibility, but their -further use is deprecated.
- -Partial puts are not supported. -An attempt to put more bytes than currently free will be rejected.
- -The IOC now provides support for strings longer than 40 characters through -Channel Access in a manner that is fully backwards compatible with older -versions of the CA library, although not all CA clients can make use of this at -the moment.
- -Adding the suffix '$' to the field name of an IOC PV name (through either -Channel Access or Database Access) causes the native type of that field to be -reported as an array of DBF_CHAR, as long as the field type is DBF_STRING, -DBF_INLINK, DBF_OUTLINK or DBF_FWDLINK. It is then possible to use a DBF_CHAR -array to read, write and monitor values from that field, and the 40 character -string length limit imposed by the DBF_STRING type is replaced by the amount of -storage allocated for the string on the IOC (for link fields the limit is -related to the maximum length of a record name).
- -The caget/caput/camonitor programs in src/catools can now use long strings by -adding the command-line option -S which causes them to handle an array -of DBF_CHAR as a string. Both MEDM and EDM can already present such DBF_CHAR -arrays as strings in their text widgets (although you do have to configure the -widget to format it as text), so this solution already works with some CA -clients, although by no means all clients support it yet.
- -The Darwin version of epicsEnvShow (in src/libCom/osi/os/Darwin/osdEnv.c) -now uses _NSGetEnviron() to get the pointer to the environment string -table.
- -Out-of-tree users of libCom's gpHash routines should change the type of their -pointer to their gpHash table to avoid compiler warnings. The first argument to -all of the gph...() routines used to be a void * (or a -pointer to one for gphInit()) but is now a struct -gphPvt * (struct gphPvt ** for gphInit) for -better type safety. The definition of the structure has not been made public, -although a declaration is provided in gpHash.h.
- -The existing routines used to hash strings have been replaced by a new -pair of functions that are prototyped in the epicsString.h header file:
- -unsigned int epicsStrHash(const char *str, unsigned int seed); -unsigned int epicsMemHash(const char *str, size_t length, unsigned int seed);- -
The seed argument should normally be zero, but can be used to chain -several hash calculations together to create a single value from multiple -strings or memory buffers. The resulting value should be masked with the -appropriate number of bits for the desired hash width. These functions both -use the same algorithm, and on most CPUs should be faster that the previous -hash functions used in Base. Use epicsStrHash() on nil-terminated strings, -epicsMemHash() if the data might contain zero bytes.
- -The existing OSI epicsFindSymbol API has been expanded to support dynamic -loading of binary files, on architectures where the facilities necessary to -implement this are provided (currently Linux, Solaris, Darwin and vxWorks). A -new but optional command is provided for iocsh which calls the new -epicsLoadLibrary() function. In order to include this command in an -IOC, you must include the dlload.dbd file; the command will then be -installed when the IOC's ioc_registerRecordDeviceDriver routine is -run.
- -To dynamically load a new routine for use with the sub or aSub record -types, you also have to register the subroutines at runtime. You can use the -EPICS build system and the registerRecordDeviceDriver.pl script to write the -necessary code for you, you just have to create a .dbd file that declares the -functions in the library and add the derived .cpp file to the library -sources. The product of your build should be a LOADABLE_LIBRARY to -ensure that the correct linker commands are used.
- -After a shared library is loaded into the IOC using the new iocsh -dlload command you will usually have to run the -lib_registerRecordDeviceDriver routine to register the components -that were mentioned in the .dbd file. After registration the functions can be -found as normal by setting the SNAM field of your sub or aSub record -instances. Once loaded, shared libraries cannot be unloaded again as there is -no way to be sure that some other part of the IOC doesn't still have a -pointer to something inside the module.
- -Components provided by a shared library can include functions for sub and -aSub records, iocsh commands, time providers and sequence programs. Record -and device support code may be possible, but there are complications in -creating the .dbd file so we don't recommend it yet. It is possible to load -libraries after iocInit, but the code is not re-entrant so should only be -used from the main thread. Adding new record types or device support will -not work after iocInit.
- -The CA::put and CA::put_callback methods now use the -native type of the PV to determine which data type to use in all cases; -earlier versions looked at the Perl data type for single-valued PVs, but this -was truncating some double values into integers.
- -Allow time providers to supply timestamps in interrupt context. A pair of -new API routines in epicsTime.h epicsTimeGetCurrentInt() and -epicsTimeGetEventInt() will check the most recently successful -current-time or event-time provider and forward requests to the routine -registered by that provider, if any. The priority list is not traversed, so -if the latest provider has not registered an interrupt-safe routine by -calling generalTimeAddIntCurrentProvider() or -generalTimeAddIntEventProvider() as appropriate, these API routines -will return failure. The resulting timestamp is not protected against -backwards movement either.
- -Added a routine generalTimeHighestCurrentName() which returns the -name of the highest prority registered current time provider. Comparing this -with the name returned by generalTimeCurrentProviderName() permits -an alarm to be generated if an IOC is not able to use the time provider it -was designed to use. The General Time stringin device support keyword -@TOPTCP has been added to make this name available in a database -record.
- -The following routines have been renamed, but the old name may still be -used since a macro with the old name has been added:
- -- -- -- -
-- -Old Name -New Name -- -generalTimeCurrentTpRegister -generalTimeRegisterCurrentProvider -- -generalTimeEventTpRegister -generalTimeRegisterEventProvider -- -generalTimeCurrentTpName -generalTimeCurrentProviderName -- - -generalTimeEventTpName -generalTimeEventProviderName -
The routine generalTimeCreateSyncTimer() was not useful in -practice due to time provider initialization issues, nor was its -implementation protected properly for use on SMP systems so it has been -deleted. The deprecated and empty synchronize() method from the -epicsTime class has also gone.
- -RTEMS release 4.9.2 or newer is required. EPICS now configures RTEMS to use -unified executive/malloc memory pools if available (RTEMS 4.10 and up).
-RTEMS stack sizes have been reduced. This allows more clients in machines -with limited memory.
- -RTEMS file descriptor allocation has been increased.
- -Record definitions can declare their own alias names along with the field -values, or a separate alias statement can also be used:
- -
- record(ai,"canonicalName")
-{
- alias("firstAlias")
-}
-alias("canonicalName","secondAlias")
-
-
-Aliases can only be created for records that have already been loaded by -the IOC, although they don't have to appear in the same .db file. A CA client -can discover that a record name is an alias by fetching its .NAME field, -which will always return the canonical name for the record. These new -routines in the dbStaticLib library handle aliases:
- --- -long dbCreateAlias(DBENTRY *pdbentry, const char *paliasName); -int dbIsAlias(DBENTRY *pdbentry); -int dbGetNAliases(DBENTRY *pdbentry) -long dbDeleteAliases(DBENTRY *pdbentry);-
Aliases are located using the existing record instance API. Use -dbIsAlias() to test whether a record is actually an alias or not. -Aliasees can be deleted like record instances using dbDeleteRecord() -which will not delete the underlying record if the DBENTRY refers to the -alias (deleting a record instance does delete all its aliases though). The -dbDeleteAliases() routine deletes all aliases of the selected -record, and will return an error if used on an alias.
- -Any out-of-tree tools that scan through all the records in the database -using dbFirstRecord() and dbNextRecord() may need modifying -to avoid duplicate processing of aliased record instances. Also note that -the set of info items for a record instance are not shared with its aliases, -which each have their own info item namespace.
- -Supplied by Matt Rippa <mrippa@gemini.edu>. Should work for -MVME2400, too.
- -A new option -p was added to all Channel Access command line -tools to allow specifying the CA priority.
- -Changed linux builds to link against libncurses instead of libcurses -(suggested by Peter Zumbruch).
- - -Definition of GCC_EXEC_PREFIX removed from CONFIG.CrossCommon and -unexport of GCC_EXEC_PREFIX removed from vxWorks and RTEMS builds.
- -RTEMS release 4.9 or newer is required. If you are using the RTEMS NFS -time provider you need to use RTEMS 4.9.1 or newer.
- -Correctly return epicsEventWaitTimeout when event is not pending and -timeout value is 0.0 seconds.
- -Fixed a race condition exposed by compilers with more agressive -optimization.
- -The camonitor program now supports the ability to display both -server- and client-side timestamps, simultaneously if requested. The old -command-line options -r -i and -I that controlled -the timestamp display have been replaced with a new -t option that -takes additional argument letters to control which timestamp sources and -output format should be used.
- -See the Command Line Tools section of the Channel Access reference manual -or run camonitor -h for a summary of the options.
- -A new device support has been added that allows a stringout record to -output one-line messages to stdout, stderr or the errlog subsystem. Use -DTYP="stdio" and set the OUT field to one of "@stdout", "@stderr" or -"@errlog" to control the message destination. A newline is appended to the -contents of the record's VAL field when printing.
- -The way in which EPICS gets the time has been significantly revised since -R3.14.9 with the introduction of the General Time subsystem. Two kinds of -pluggable time providers are now supported, which return either the current -time or the latest timestamp of a numbered Time Event from a hardware event -system. All IOCs must have at least one Current Time provider, but Event Time -providers are optional. The General Time subsystem guarantees that the -timestamps returned never step backwards, even when switching between time -providers.
- -A Current Time Provider reports the current wall-clock time if it is able -to when asked; if it can't it says so, and the time subsystem will then ask -the next provider in its list and so on until someone replies with the time. -Event Time providers are handled similarly, except that they are asked for -the timestamp associated with a particular Time Event number rather than the -current wall-clock time. The registered time providers can be listed using -the IOC command generalTimeReport(int interest) and some time -providers also have their own separate report commands.
- -Different target architectures come with different default Current Time -providers in Base. The Unix-like architectures rely on the underlying -operating system clock, which normally involves running something like ntpd -as a separate process. The real-time operating systems vxWorks and RTEMS -install two Current Time providers; the native operating system clock at the -lowest priority (this provider includes a task to periodically reset the -operating system clock from a higher priority time provider), and an NTP time -provider which synchronizes the underlying operating sytem tick timer with an -NTP server. Microsoft Windows targets using the Win32 API use a -Windows-specific time provider which contains a built-in PLL.
- -There are no Event Time providers included with Base except for an -optional "Last Resort" Event provider which can be installed if a site wants -to be sure that every Time Event number will have a recent timestamp -associated with it even if the hardware event system goes down. The Last -Resort Event Time provider returns the current time for every Time Event -number. To install this provider, run the command -installLastResortEventProvider from your IOC startup script.
- -Additional information about General Time and the time providers included -with Base can be found in the IOC Application Developers Guide for R3.14.10, -sections 9.7 and 20.6. General Time was originally written by David H. -Thompson and Sheng Peng at ORNL, subsequently worked on by Babak Kalantari -and Timo Korhonen of PSI, and merged into Base by Peter Denison from Diamond. -Andrew Johnson provided input into the design at various points and made -various code revisions after the merge.
- -When creating an IOC with one of the win32-x86 target architectures, a -file dllPath.bat is now generated in the iocBoot/iocxxx directory -which can be run to adjust the PATH variable to include all of the support -application bin directories which might contain DLLs that the IOC uses. The -PATH also includes the IOC application's own bin directory, which simplifies -starting up the IOC as well.
- -Any C or C++ code can #include "epicsEndian.h" which defines four -macros. The main one is EPICS_BYTE_ORDER and is defined to be either -EPICS_ENDIAN_LITTLE or EPICS_ENDIAN_BIG (these are numeric constants 1234 and -4321 respectively). The fourth macro is called EPICS_FLOAT_WORD_ORDER and is -needed because some ARM systems use mixed-endian format floats.
- -Note that just knowing the CPU's endianness doesn't tell you the complete -story about the byte order that your hardware registers will present to the -CPU; byte swapping is often performed automatically by PCI to VME bridge -devices and by other kinds of bus converter, so "portable" drivers aren't -always.
- -A heavily modified version of Andy Foster's genSub record type has been -added, called the aSub (Array Subroutine) record type. The new name is so -that genSub records can continue to be used in IOCs that need those features -that have changed or been removed in creating the aSub record type. The main -differences between genSub and aSub are:
-The Soft Channel device support for all input record types now supports -the fetching of the timestamp along with the data when the record's TSE field -is set to epicsTimeEventDeviceTime (-2). This works for both DB and CA links. -However the timestamp will only be fetched if the record's TSEL link is not -set, so you can't point TSEL to another record to read the -2 value into TSE -(that's because to make this work properly would require that the TSEL link -be read twice every time the record processes; once in the soft channel -device support, and again when the record type calls -recGblGetTimeStamp().
- -Thanks to Eric Bjorklund for providing a patch to devLib that gives access -to the CR/CSR address space (for those on a VME64 CPU with appropriate -support from your BSP).
- -Query routines have been added that count CA client connections made by -Access Security rules and Database Channel Access links. A similar routine -will be added to version 2.0.12 of the sequencer for counting sequence -program CA links:
- --- -void ascaStats(int *pchans, int *pdiscon); -void dbcaStats(int *pchans, int *pdiscon); -void seqcaStats(int *pchans, int *pdiscon);-
The pchans parameter should point to integer storage which will be set to -the total number of channels open, while the value at the pdiscon pointer -will be set to the number of channels currently disconnected. Prototypes for -these routines can be found in the header files asCa.h and dbCaTest.h -(seqCom.h for the sequencer).
- -J. Lewis Muir provided patches to ensure that all messages printed on the -IOC's console by the errlog subsystem are sent to the stderr output stream -rather than to stdout.
- -This thread calls upon vendor libraries which may use significant amounts -of stack. Account for this by providing the ipToAsciiProxy thread with an -epicsThreadStackBig stack.
- -These three new commands are mainly intended for use with DESY's redundant -IOC software but they might have some uses for others too. iocBuild -allow an IOC to be initialized and set up ready for a quick start without -actually making it live; a subsequent iocRun will bring it to the -same state as an iocInit would have. Once an IOC has been started -(using either iocInit or iocBuild + iocRun) the -iocPause command can be used to freeze it, disconnecting its PVs and -stopping all scan activity. The iocRun command restarts the IOC -from this state.
- -While this might seem like a useful thing to be able to do, we have not -tested it on IOCs using real-world I/O, and it is not unlikely that pausing -an operational IOC could cause irremdial havok to any device support, -sequence programs and other software which is not expecting it, so use with -care and make sure you test it first. An IOC that is kept paused for more -than a minute or two could fill up its network buffers and become impossible -to restart without rebooting.
- -A fairly significant number of changes have been that were necessary to -allow the IOC code to run properly on 64-bit CPU architectures where a -long is 64 bits wide. This was not as simple as replacing every -instance of the typename long with epicsInt32 because that -would have broken a lot of external code unnecessarily. The generated -record.h file now uses the typenames from epicsTypes.h to declare record -fields, thus field sizes are the same on both 32- and 64-bit platforms (on -64-bit, a DBF_LONG does not map to long but to -int). This change does not affect status return values, which are -still implemented using the native long type for the platform.
- -While changing the conversion routines in db/dbConvert.c and -db/dbFastLinkConv.c to support 64-bit architectures as described above, it -was noticed that an empty string converts to the value 0 for all types other -than DBF_CHAR and DBF_UCHAR where it converts to the ASCII -character '0', value 0x30. Since these types are usually used for -storing small integers or boolean values rather than ASCII characters, it was -decided that this conversion is wrong so it has been changed to match the -other numeric conversions.
- -APIs that are intended for use inside the IOC, the epicsShareAPI -attribute is slowly being removed. This keyword is only used on MS Windows -where it indicates to the compiler that the function should use Pascal -calling conventions rather than C ones, and was necessary to be able to call -such functions from MS Visual Basic. APIs for use by client code (CA and -libCom) will generally retain the attribute if they already had it.
- -Thanks to John Hammonds at the EPICS Codeathon, the record type -implementations have been converted from K&R to ANSI C prototypes.
- -Base now provides a CA client library interface for Perl5 scripts in -src/cap5 and includes as examples some implementations of the -catools programs written in Perl. Documentation on how to use the Perl -library is available in base/html/CA.html after the build completes. -This library cannot currently be built on Windows targets.
- -iocInit() installs an signal handler for ignoring SIGHUP. This fixes a -problem that appeared with soft IOCs run as a procServ child on some Linux -systems, where a disconnecting CA client would cause the soft IOC to get a -SIGHUP and exit.
- -Several changes have been made to the build system, although these changes -should not affect the contents of Makefiles or any applications -using Base. They do however require that the version of GNU Make used be 3.81 -or later. These changes are briefly:
-A new tool is provided that expands out @VAR@ macros. By - default it knows the value of @TOP@, @ARCH@ and any - paths defined in the application's configure/RELEASE file such - as @EPICS_BASE@, but additional macros can be defined in the - Makefile that uses it by adding to the EXPAND_VARS - variable like the example following, which creates an @EXE@ - macro that expands out to .exe on windows targets and to nothing - on other platforms:
-EXPAND_VARS += EXE=$(EXE)-
Files that contain @VAR@ macros to be substituted must have - an at sign @ as the last character of their name and be - listed in the EXPAND variable of their Makefile. The - expanded file will have the same name as the original with the - @ suffix removed, and is then available for compiling or - installing using any other build mechanism.
-Support has been added for installing Perl library modules. The - Makefile variable PERL_MODULES can be set to a list of - names of files to be installed into the $(TOP)/lib/perl - directory. The above macro expansion facility can then be used in perl - programs that use these libraries to set the perl search path to include - that directory. The syntax for this is as follows:
-use lib '@TOP@/lib/perl'; - use MyModule;-
The filenames listed in PERL_MODULES can include subdirectory - path components and the build system will preserve these in the installed - result.
-Rules and macros were added for creating an *.acf file, access security -configuration file, from an *.acs file using the C preprocessor. An .acs file -has the same format as an .acf file with the addition of '#include -"<filename>"' and '#define <macroname> <value>' lines. The -C preprocessor includes the #include files and performs the macro -substitutions.
- -In previous versions the INDX field of a subArray record was set to zero -if the array that it reads through its INP field became empty. From this -release the INDX field will only be modified by the record's process() -routine if INDX is greater than MALM. In the event that the no data is read -through the INP link, the subArray's UDF field will be set and a UDF/INVALID -alarm will be generated.
- -The argument to scanOnce() is a pointer to the record to be -scanned. This used to be a void * pointer, but is now a -dbCommon * pointer. Record types written in C that call -scanOnce() will still compile without having to change the source -code (although a comiler warning may be generated), but any record types -implemented in C++ will have to be fixed to cast the record instance pointer -to a dbCommon * instead.
- -The following target architectures have been added to this release, -although the core developers lack the ability to test all of them:
-The compile line list of directories to search for header files now -includes O.Common and the existing os subdirectories of SRC_DIRS -<src_dir>/os/<OS_CLASS>, <src_dir>/os/posix, and -<src_dir>/os/default.
- -The -j jobs option is now supported for users of GNU Make -version 3.80 or later. The -j option speeds up building by allowing -multiple jobs (build commands) to be run in parallel; this will have the most -effect on hosts with multiple symmetric processors, but can also speed up -uni-processor builds. Builds still work as before when run without --j, but using the -j option with an earlier version of GNU -make will fail since this relies on the $(eval) function which was -introduced in GNU Make 3.80.
- -The -j option has been tested with this version of EPICS Base, -but it may not work for Extensions or IOC applications unless their -dependancies are specified correctly.
- -New DIRS directory dependancy specifications are required to determine the -directory build order with -j. For example if we have 2 directories, -src and configure, and the configure directory must be built before the src -directory, the Makefile should contain:
- --- -DIRS = configure src - src_DEPEND_DIRS = configure-
The directory dependancy specifications are only needed when -j -is given to make. Without the -j the order of directories in the -DIRS definition determines the build order as before.
- -Some sites may be using breakpoint tables that are not monotonic in one -direction. In R3.14.9 both axes of a breaktable had to be monotonic; a table -will not be loaded if either the raw or engineering values change direction. -There are situations where this check is too strict however, so a new -variable named dbBptNotMonotonic has been added that disables this -check if its value is non-zero.
- -Breakpoint tables are often included in an IOC's .dbd file, but they can -also be loaded from a .db file (although VDCT will probably not understand -them). Since there is no way to set the above variable inside the -dbExpand program that expands out an IOC's .dbd file (which also -rejects non-monotonic breaktables), all applications that use such tables -will have to load those tables separately, using either -dbLoadDatabase or dbLoadRecords.
- -Added support for more 'Global Environment Variables'. Documented in the -EPICS/RTEMS tutorial.
- -Set NTP server as well as nameserver and log server from server bootstrap -settting.
- -The -ansi flag has been removed from CONFORM_FLAGS_STRICT and -CONFORM_CXXFLAGS_STRICT -- there are many useful library functions whose -prototypes are disabled when -ansi is used.
- -The value in the SELN field was not being checked against its limit, -potentially causing a crash on some architectures.
- -To prevent an interactive shell from being started, give a -S -(upper case) option on the softIoc command line. The old -s (lower -case) option is still accepted, but now does nothing.
- -Some error messages output by the dbLoadRecords parser should be easier to -understand, having been reworded to report what was actually the problem -rather than just which routine found the error...
- -The iocsh command registration data and routines have been moved out of -the src/iocsh directory (which now no longer exists) into a file for -each library. At the same time, the iocsh implementation code has been moved -into libCom. There is no libiocsh.a library created any more, so any -applications (such as the sequencer) which explicitly list iocsh in -a xxx_LIBS definition in their Makefile(s) will need to be modified -to have the library name removed. In most cases though the library will have -been included using the EPICS_BASE_IOC_LIBS or -EPICS_BASE_HOST_LIBS variables that are set in Base, and thus no -changes will be needed.
- -The cygwin make version 3.81-1 does not handle MS-DOS path names and thus -does not work for EPICS builds with RELEASE file definitions. From the -discussion on the cygwin mailing list it looks like this will be fixed in -make version 3.82. In the meantime make version 3.80 or a fixed make can be -downloaded from this -website.
- -The following target architectures have been added to this release, -although the core developers lack the ability to test all of them:
-Wind River Systems do not support optimization levels beyond -O2 -for vxWorks applications compiled using gcc, so optimized vxWorks builds are -now set to -O2 only (we currently use -O3 everywhere -else).
- -There was a bug in the portable channel access server library that -prevented the PV Gateway from being able to handle and pass on alarm -acknowledgements from the EPICS Alarm Handler ALH. This has been fixed in -this release and should only require that the gatewey be recomplied against -this version of Base.
- -The parser for the substitutions file accepted by dbLoadTemplate() has -been revised, and is now stricter than it used to be — unmatched -characters that were accepted and discarded without warning before will now -generate errors. The quote characters at the two ends of a quoted string -value must now match, although either single or double quotes can be used. -Escaped characters inside a quoted string should pass safely through to the -underlying dbLoadRecord() command. The characters permitted in a bareword -parameter (i.e. a filename or value that is not inside quotes) have been -reduced from the overly wide set allowed before; the permitted characters now -comprise: a-z A-Z 0-9 _ - + : . / \ [ ] < > ;
- -Field value strings loaded from a database file by dbLoadRecords() can now -use C89-compatible escaped character codes such as \", \', \t, \n, \064 and -\x7e. The parser also now checks for and reports strings that have a newline -character in them as an error - if you want a newline in a field, use the \n -escaped version. These escapes only apply to the value part of a field() -entry in .db file though; no other strings have escape codes translated.
- -These test programs are no longer installed into the bin/arch -directory. Running all these programs on any host architecture is as simple -as typing make runtests in the base top level directory or in any -appropriate subdirectory. The runtests target uses Perl's Test::Harness -module to execute all of the test programs and summarize the result. It is -also possible to run individual tests as desired, by executing them from the -relevent O.<arch> directory; the program output is designed to be -comprehensible to humans.
- -For vxWorks and RTEMS, a test harness has been created that will run all -of the test programs in a suitable order. At a vxWorks target shell, type:
- --- -ld </path/to/base/bin/vxWorks-arch/vxTestHarness.munch -cd "/path/to/writable/directory" -epicsRunLibComTests-
On RTEMS, boot the bin/arch/rtemsTestHarness binary.
- -You may wish to capture the output from running these to a file to more -easily check the results, since there is no wrapper program to collect and -summarize the results of the individual test programs.
- -The handling of breakpoint table data has been reworked. It is now -possible to give table data in either ascending or descending order, and the -breakpoint data may have a negative slope such that the engineering values -increase while the raw values decrease and vice versa. The only restriction -on the data is that is must be monatonically increasing or decreasing, so you -can't use a breakpoint table for curves that have local minima or maxima. -This restriction is checked for when the breakpoint table is loaded.
- -The build configuration support for vxWorks 6.x has changed significantly, -having been recombined with the older vxWorks 5.x support. The two target -architectures vxWorks6-mv2100 and vxWorks6-mv5100 have been -removed; IOCs built under vxWorks 6.x using these architectures must revert -to the original vxWorks-ppc603_long and vxWorks-ppc604_long -architectures instead. The configuration file -CONFIG_SITE.Common.vxWorksCommon now specifies the vxWorks version number, as -well as the filesystem path to the installation of vxWorks using the -WIND_BASE variable.
- -The calc expression parser and exective have undergone a signficant -overhaul, although the API and expression language supported are backwards -compatible with one minor exception, described below. Significant -improvements have been made to both the API and the expression language: -Multiple values can be calculated and assignments made in a calc expression; -Error reporting for humans is now supported by the expression parser, and -code can discover what inputs and outputs are needed and generated by an -expression.
- -Assignment operations are now possible, using the new := operator -which must have an expression variable (A through L) to its -immediate left. Multiple expressions can be included in the calculation -string, separated by a semicolon ;, all but one of which must be -assignments. The value of the whole string is determined by the single -non-assignment expression, which may appear anywhere in the string. For -example, the following string causes a single CALC record to output the -successive values of a sine curve in 1 degree intervals: -sin(a); a:=a+d2r
- -Previously any expression that performed an invalid operation which would -generate a NaN or Inf result would be stopped immediately and return an error -to the caller. Now it is possible to perform operations that generate NaN or -infinite results, and the results are returned as normal. The result of the -expression or the value assigned to a variable may thus be a NaN or an -infinity. To permit this to be checked within the expression, the new -operators finite(), isinf() and isnan() have been -added to the expression language. The literal values Inf and -NaN are also now supported in expressions.
- -The only incompatible change to the expression language was to change the -NOT operator from performing a unary minus operation to an integer -bitwise not; the former meaning is illogical and as a result was probably not -used much, if at all — nobody complained when I discussed this on -tech-talk...
- -The extended API and the expression language are now discussed in detail -in chapter 19 (libCom) of the R3.14.9 version of the IOC Application -Developer's Guide.
- -As a result of the above changes to the calc expression parser and -executive, both the calc and calcout records and the Access Security library -have been modified to take advantage of the new error diagnostics. The Access -Security library has been made to reject any expression that contains an -assignment operation, to prevent any possible security holes that might be -caused by this significant change to the expression rules.
- -The calc and calcout records have had some subtle changes applied: To -mitigate the effects of the Inf/NaN behaviour change, the result of an -expression is checked for NaN, which will result in the UDF field being set -and an Undefined/INVALID_ALARM being raised as a result.
- -An empty string is no longer a legal expression, therefor the CALC and -OCAL fields have been changed so that their default value is a literal -"0" string. Also any calcout record device support must now add the -line #include "postfix.h" before the -#include "calcoutRecord.h" line in the source code.
- -The recGblResetAlarms() routine (which is called by all record -types towards the end of record processing) now optionally calls a single -hook routine via the function pointer recGblAlarmHook after it has -updated a record's alarm status and severity. See regGbl.h for the hook -routine prototype definition, the routine is also given the previous values -of the record's status and severity. The hook routine must not block, since -this would hold up record processing.
- -These record types now support raw simulation mode. If the value of the -SIMM field is 2 (enum string "RAW"), the SIOL link value is placed into the -RVAL field and passed through the raw to engineering units conversion process -just like the real device support's raw value would be.
- -The TIME field of a record is now displayed in a human readable format. -TIME used to have an interest level of 4 since it was output in hex and not -very easy to understand, but it has now been moved to interest level 2.
- -The convertRelease.pl parser now supports the use of --include statements in configure/RELEASE files as well as -include statements.
- -Changes were needed to the configure/tools/munch.pl script to -support vxWorks-MIPS targets.
- -A new facility is provided in libCom for use in generating automated test -programs. Many (but not all) of the test programs in libCom/test -have been converted to use this facility.
- -Off-by-one buffer overflow error fixed in dbFindField() which only seemed -to affect vxWorks-(intel) targets.
- -Create a POSIX-compliant TZ environment variable from EPICS_TIMEZONE. -Previous versions had an incorrect format which was ignored by tzset().
- -Added space for user extensions. This provides the infrastructure for the -spy command.
- -Fixed error in epicsThreadGetName for non-EPICS threads.
- -Added hooks for application routines to supply special network -configuration parameters. The RTEMS startup code calls -epicsRtemsInitPreSetBootConfigFromNVRAM just before reading values from NVRAM -and epicsRtemsInitPostSetBootConfigFromNVRAM just afterwards. See -epicsRtemsInitHooks.h for prototypes and global variables.
- -e_flex has been modified to accept DOS line endings as well as -Unix ones. The scan.c file was recreated using e_flex -itself and the flex.skel file on the modified -scan.l.DISTRIB source. initscan.c is not required or used -for the EPICS build, so it has been removed.
- -devLib is now built for all architectures, whereas before it was only -built on RTEMS and vxWorks. However for it to be usable there must be an -appropriate table of OS-specific routines provided. For those OSs that don't -implement these routines a default table is defined which will result in an -error on any attempt to use devLib routines, but the default table can be -overridden in an external library that provides an appropriate table. This -subtle change was implemented to allow use of the SIS 3100 PCI to VME bridge -from Linux, and needs no change to the other implementations of -devLibOSD.c.
- -Added epicsThreadResume command.
- -mallocMustSucceed and callocMustSucceed accept 0-byte requests. Note that -these routines may return a NULL pointer in such cases.
- -Added support for EPICS_HOST_ARCH=darwin-ppcx86 for building -libraries/applications which will run on both PowerPC and Intel x86 -targets.
- -Added support for EPICS_HOST_ARCH=darwin-x86.
- -On architectures whose native version of strtod() actually works properly -(i.e. converts +/-Inf[inity] and NaN strings to their double equivalents) we -managed to break the use of this in the R3.14.8.1 release. This is now -fixed.
- -This release adds a fourth level of version number, which we haven't used -since R3.13.1.1. The intention is to imply that R3.14.8.1 includes some small -but important changes since R3.14.8 but no signficant new behaviours or API -modifications. This fourth level has required us to modify the version number -system and the macros in the epicsVersion.h file slightly though. We have -taken the opportunity to introduce a new variable EPICS_SITE_VERSION -to the file configure/CONFIG_SITE that adds an optional site-specific version -number; sites that were achieving this by editing the -configure/CONFIG_BASE_VERSION file should switch to setting -EPICS_SITE_VERSION instead.
- -Mantis entries fixed:
- -232 - non-preemptive mode client relying on ca_poll does not always -reconnect
- -These changes are required to allow software outside of Base to be built -on win32 architectures.
-The win32 Pascal calling convention (epicsShareAPI) has been removed - from the following header files in libCom/misc: adjustment.h, - cantProceed.h, epicsConvert.h, epicsStdlib.h, epicsString.h.
-A new function epicsStrtok_r has been added because win32 does not - implement strtok_r.
-All function described in epicsStdlib.h are now implemented in - epicsStdlib.c
-The type name mapping array mapdbfType defined in dbFldTypes.h has had - the correct export modifier keywords added to it for use on win32.
-Configure files are now available to support the win32-x86-mingw (MinGW -C++ compiler) and win32-x86-cygwin (WIN32 API with cygwin C++ compiler) host -targets.
- -Configure files were also added for linux-x86_64 and solaris-sparc64 but -these files are for experimental purposes only and to show that we are -working on these targets. Currently these two 64 bit targets are not passing -our test suite, so they must not be used in production systems.
- -An Extended Device Support mechanism has been introduced which is designed -as a safe way to widen the API between iocCore and the device support -software it interfaces with. An extended device support can now be notified -of changes to a record's hardware address, and is given the chance to approve -or reject that change.
- -As a result of introducing this notification mechanism, any device support -that was capable of handling runtime address changes in prior versions of -Base will have to be updated to provide the new interface, since the absence -of extended device support is now taken to mean that runtime address changes -are not understood by the device support. This requirement is not expected to -affect many EPICS sites.
- -POSIX thread priority scheduling is now supported. There is a new user -option USE_POSIX_THREAD_PRIORITY_SCHEDULING in the CONFIG_SITE configure file -for using POSIX thread priority scheduling. For now the default value is NO. -This has only been tested on a few versions of linux. On linux, in order, to -use real time priorities the option must be set to YES and the ioc must be -started with root privilages.
- -The definition VX_DIR was removed from configure/RELEASE and moved to -configure/os/CONFIG_SITE.Common.vxWorksCommon. The configure/RELEASE* files -should contain location definitions for EPICS modules only.
- -The definition RTEMS_BASE (and RTEMS_VERSION) were removed from -configure/RELEASE and moved to configure/os/CONFIG_SITE.Common.RTEMS. The -configure/RELEASE* files should contain location definitions for EPICS -modules only.
- -The following files have been removed from base: drvTS.h drvTS.c, egDefs.h -egRecord.c egRecord.dbd egeventRecord.c egeventRecord.c egeventRecord.dbd -erDefs.h erDefs.h erRecord.c erRecord.dbd ereventDefs.h ereventRecord.c -ereventRecord.dbd
- -These are removed from EPICS base. The version that previously came with -base was the version that worked with the APS event system. It is available -from APS. The version that works with the newer event systems that evolved -from the APS system is available from the Swiss Light Source.
- -It was possible for taskwd (task watchdog) to not detect when some of the -standard tasks failed. This is because they were passing their threadid -rather than using epicsThreadGetIdSelf. It was possible to call taskwdInsert -before the threadid was actually set.
- -dbLockGetLockId incorrectly always returned 0. dbBkpt (database breakpoint -facility) is the only code that needed this. This caused unknown errors if -the dbBkpt facility is used.
- -The maximum size was initialized to 65636 instead of 65536.
- -Add additional cast to prevent 'strict aliaising' warnings.
- -I/O redirection from vxWorks startup scripts now works.
- -This new variable which can be controlled using the iocsh var -command (or by simple assignment in the vxWorks shell) allows users to change -the behaviour of dbLoadRecords() when it finds a duplicate record -definition. The default behaviour has always been to permit multiple record() -statements for the same record name when loading record instances, but by -setting dbRecordsOnceOnly to any non-zero value, duplicates will -instead generate an error message instead. It is expected that this will only -be used in special circumstances, to detect the presence of unintentional -duplicates where it is known that they should not exist.
- -This record now sets and posts monitors on its SELN field indicating which -of the inputs was selected, independent of which selection mechanism was -selected via the SELM field. This makes it much more useful, especially when -the High, Low or Median mechanisms are chosen.
- -Macro expansions in any program using the macLib facility from libCom can -now include a default value which will be used if the macro named is not -defined at the moment of substitution. The syntax for this is -$(name=default) or ${name=default}. The default string can -itself contain other macros like this: $(name=$(default)). This -feature has actually been present since R3.14.6.
- -On a powerPC, during iocInit, a crash could occur. In particular the -SYNAPPS version of save_restore experienced crashes. This is now fixed.
- -Mantis entries fixed.
- -221 - should shutdown full duplex comm on udp sockets if not used
- -192 - concurrency bug in channel access to local DB
- -181 - ca_host_name() now returns the host name of the client, not the -host:port of the server
- -161 - issues surrounding manipulation of CA contexts
- -153 - CA (caput) client does not reconnect after server -suspend-continue-shutdown cycle
- -111 - non-preemptive clients disconnect if ca_poll() isnt called -regularly
- -Mantis entries fixed.
- -196 - portable server library intermittent hang on UNIX systems
- -191 - corrupt value when doing a put through portable server (little -endian host)
- -175 - example portable server array PV 'alan' does not have time stamps
- -Mantis entries fixed.
- -211 - GDD: aitConvertStringEnum16 does nothing if -pEnumStringTable==NULL
- -Added support for setting NFS server/mount information from PPCBUG -argument strings.
- -rtems_shutdown_executive is now called on IOC exit. On many BSPs this will -return control to the bootstrap PROM.
- -Set POSIX TZ environment variable from NVRAM, or failing that, from -EPICS_TIMEZONE.
- -Cleaned up support for obtaining network configuration from NVRAM.
- -Added support for some additional boards.
- -Set iocsh prompt from host name.
- -Initialize in-memory filesystem from tar image following executable in -bootstrap flash memory. This allows for fully standalone IOCs -- no TFTP/NFS -server required.
- -Set IOC_NAME and IOC_STARTUP_SCRIPT environment variables from bootstrap -parameters.
- -Fixed mantis entry.
- -179 -base does not build with vxWorks 6.0
- -225 - On vxWorks epicsThreadCreate returned -1 instead of 0 if a thread -could not be created. This is fixed.
- -Builds on Tiger.
- -Readline now used by default.
- -Fixed mantis entries.
- -195 - explicitly unloading Com.dll causes crash
- -230 - assert fail of caget, caput, etc under msvc 8
- -231 - manifest files not installed under visual C++ 8
- -Fixed mantis entries.
- -186 - failure after exit command if log client is running
- -222 - osiSpawnDetachedProcess doesnt close open files in dupicate process -on POSIX
- -The select record type has for a long time made use of a coule of magic -numbers (1e+30 and -1e+30) to mean "not a real value", which prevents the -record from working properly if one or other of these appears as an actual -data value. These have been changed to use +Inf and -Inf or NaN instead, so -+/-1e+30 may be used as a data value.
- -These record types have been modified to respond better to NaN values as -follows: if the VAL field contains a NaN value, the UDF field will be set and -an undefined value alarm will be triggered.
- -epicsStdlib.h declares epicsStrtod() which provides a version of strtod -which handles NAN/INF on all architectures. All uses of strtod() in base have -been converted to use epicsStrtod().
- -epicsStdlib.h also declares epicsScanFloat() and epicsScanDouble() which -replace calls to sscanf with routines which handle NAN/INF on all -architectures.
- -The posix implementation of epicsThreadCreate() now makes pthread calls to -set the stack size. The sizes returned by epicsThreadGetStackSize() for the -inputs epicsThreadStackSmall, epicsThreadStackMedium and epicsThreadStackBig -are 128K, 256K and 512K respectively on at least the architectures Linux, -Solaris, HPUX and Darwin (different values are used on vxWorks and RTEMS). -This allows creation of many more threads on most systems.
- -dbNotifyCancel now waits if the userCallback is active when dbNotifyCancel -is called. Previously it just returned. NOTE CAREFULLY. This means that the -userCallback must not free the putNotify structure.
- -caget and camonitor now have an additional "-s" option to explicitly -request server-side string conversion, which - in case of the regular CA -server - leads to "precision" info (e.g. the PREC field of an EPICS record) -being honoured.
- -Signals are blocked in all but the main thread. Applications/drivers which -require signal delivery to a subthread will need to be modified.
- -Three new functions are implemented: epicsExit, -epicsExitCallAtExits, and epicsAtExit. These are similar to -exit and atexit, i.e. they provide the ability to register -a function to be called when the process exits. They are provided becase -neither vxWorks or win32 properly implement exit and -atexit. Note that they apply to an IOC stopping NOT to a thread -exiting.
- -In order to support iocsh redirection of stdin, stdout, -and stderr, epicsStdio.h defines the following new -functions: epicsGetStdin, epicsGetStdout, -epicsGetStderr, epicsSetStdin, epicsSetStdout, -epicsSetStderr, and epicsStdoutPrintf. -epicsStdioRedirect.h defines macros that redefine stdin, -stdout, stderr, and printf.
- -Any code that includes epicsStdioRedirect.h will automatically -have it's stdio redirected. It has been added to many files in base. If code -called by dbior wants it's output redirected, it must also include this -file.
- -Any command that previously had an argument for a report file name no -longer has the argument. The new iocsh redirection capability is now used. -For example the former command:
-dbl "0" reportName-
Is now:-
dbl > reportName-Note that this does NOT work on the vxWorks shell only on iocsh. On the -vxWorks shell the following command can be given: -
iocshCmd("dbl > reportName")
-
-errlog now calls epicsAtExit and releases all resources when -epicsExitCallAtExits is called.
- -epicsStrGlobMatch() routine added.
- -Input/output redirection added.
- -iocshCmd routine added (callable from vxWorks shell).
- -help command uses globbing.
- -The ODLY (Output Delay) was not handled properly. This is fixed.
- -make sure reset gets called when size of INP array changes.
- -Data Base Request Option DBR_ENUM_STRS for the DTYP field of soft records -can cause an IOC to crash.
- -RTEMS implementation of epicsMessageQueuePending() now works.
- -Added support for MVME2100 BSP.
- -Added support for building RTEMS bootable images.
- -The cdCommands and envPaths files are now created in ioc* directory only -when the ARCH defined in the ioc*/Makefile is present in BUILD_ARCHS for the -build.
- -The complete set of Channel Access command line tools (caget, caput, -camonitor, cainfo) is available as announced during the May 2004 Collab. -meeting. Documentation is part of the CA Reference Manual. Be aware of -possible name conflicts with existing local tools.
- -The directory name wildcards that were defined here have been moved to -iocBoot/Makefile, which as a result is no longer unique in having its own -configure/RULES file.
- -This is really a demo and a complete EPICS IOC application, not a -template. It will be made available separately.
- -The EPICS_HOST_ARCH win32-x86-cygwin was renamed cygwin-x86 to avoid -confusion about what OS interfaces are used on Windows: native win32 or -cygwin's emulation of POSIX. Now we have
-The time server's IP address used by the vxWorks clock routines was not -reading the default value from the generated envData.c file but going -straight to the boot host if no environment variable by that name was set.
- -These files are now parsed by a program that recognizes and ignores
-comment lines. Previous versions of this parser would extract settings from
-these files even if they appear on a line starting with a '#' character, so
-the last line containing a setting for any variable would give the value used
-as the default. This was first noticed in R3.14.5 where a commented-out
-setting for the EPICS_TIMEZONE parameter was added
-after the uncommented version.
Many of the commands crashed if given no arguments. They are now more -crash proof.
- -When a CA user asked for display or control limits as a float a 0 value -was returned as -1.17549435E-38. This is now fixed.
- -A new dbd rule will create a <name>Include.dbd from files specified -in a <name>_DBD macro definition. An include line will be placed in the -<name>Include.dbd for each file specified in the <name>_DBD -definition. If a Makefile contains
-DBD=xxx.dbd - xxx_DBD = f1.dbd f2.dbd f3.dbd- -
an xxxInclude.dbd file will be created containing the lines
-include "f1.dbd" - include "f2.dbd" - include "f1.dbd"- -
and dbExpand will be invoked to create the xxx.dbd file from the -xxxInclude.dbd.
- -Old solaris 6 specific compiler options have been removed.
- -The new top level Makefile only target, cvsclean, removes cvs .#* files in -all dirs of the top directory tree.
- -The new archclean target is like the clean target except that O.Common -directories are not removed.
- -Add epicsSnStrPrintEscaped.
- -epicsExportAddress(typ,obj) now generates an extern named pvar_typ_obj and -epicsExportRegistrar(func) an extern named pvar_func_obj. Previously both -just named the variable pobj.
- -epicsRegisterFunction(name) in conjunction with the dbd 'function' keyword -can be used to register functions referred to by record subroutine name -fields.
- -The access security configuration rules now accept quoted strings where -just names were allowed previously.
- -All dump routines now have FP version.
- -A new shell command "ascar(int level)" is now available. It produces a -report of the INP channel access connections. Level (0,1,2) produces (a -summary report, summary plus unconnected channels, summary plus report of all -channels)
- -This bug was introduced in R3.14.5 and does not exist in any other - release.
-Subscription updates intermittently do not resume depending on - circumstances when unresponsive circuit reconnects
-A decision was made to add a change to EPICS R3.14.5 so that when - a TCP circuit is temporarily unresponsive the channel, but not the - circuit, is immediately disconnected. This change was determined to - be necessary to improve overall system robustness in the face of IOC - or network overload. Unfortunately, an error was made when installing - these changes. I am sorry about any inconvenience that this has - caused. Thanks to Ken Evans at the APS for discovering this - problem.
-This bug probably exists in all R3.14 releases.
-Passing a nill function pointer to - ca_replace_access_rights_event() should install a noop handler, but - this currently causes a failure.
-Regression tests have been installed to detect this mistake.
-This bug was introduced in R3.14.5 and does not exist in any other - release.
-CA client library crash when clear channel request occurs in get - callback handler
-When testing the striptool application, Ken Evans, discovered a - bug in the CA client library occurring when a clear channel request - occurs in get callback handler. Regression tests have been updated so - that this mistake will not slip through testing undetected in a - future release.
-This bug was introduced in R3.14.5 and does not exist in any other - release. Subscription request must be made from within connection - callback handler
-It has been discovered (by Ken Evans while testing the gateway) - that certain subscription requests were persisting in the gateway - after clients had deleted them. This bug causes additional resources - to be consumed, but does not result in a crash.
-Additional debugging has revealed that the CA client library in - this situation inadvertently made the subscription request twice: - once at the users’ request, and later on again when the - library auto installed subscriptions for disconnected channels.
-Probably introduced in a previous R3.14 release.
-An intermittent C++ exceptions during regression testing.
-In EPICS release R3.14 the CA client library is implemented using - axillary threads. If the application does not call - ca_context_destroy() these threads will still be running, and - depending on operating system conventions the process may - not exit if the main thread exits, but axillary threads are - still running. Note that ca_context_destroy() is functionally - equivalent to the deprecated call ca_task_exit().
-This bug is only present in the portable CA server and so it does - not impact IOC based applications. The bug is present in the - CA gateway and any portable CA server based application. This problem - may have been recently introduced when GDD was patched to properly - handle fixed sized strings.
-Failure, when writing large string through the portable CA server. - There appears to be a possibility of the wrong string being written - when a smaller string is used. You may see the following message.
-A call to "assert (! this->pValue->unreference ())" failed - in ..\..\..\..\include\smartGDDPointer.h line 88.
-Thanks to Stephanie Alison at SLAC for discovering the bug and to - Ken Evans at the APS for reminding me to fix it.
-Don't seg-fault if no argument is passed to dbtr.
- -New files have been created in configure/os to allow -CROSS_COMPILER_TARGET_ARCHS to include solaris-sparc-gnu and -solaris-sparc-debug when EPICS_HOST_ARCH is solaris-sparc. Also -CROSS_COMPILER_TARGET_ARCHS can now include linux-x86-debug when -EPICS_HOST_ARCH is linux-x86.
- -A new function epicsStrnCaseCmp has been added. It is like strncmp except -that it ignores case.
- -R3.13 compatability files are no longer generated automatically during the -build. configure/CONFIG_SITE contains two new macros for building -compatibility files. They are set to NO but can be set to YES. The macros -are:
-This will install the compatibility files needed to build R3.13 - extensions built with this R3.14 base.
-This will install the compatibility files needed to build R3.13 - extensions and IOC applications built with this R3.14 base.
-A new set of templates has been included in R3.14.5 to implement a Virtual -LINAC in an ioc using databases and sequence programs. The Virtual LINAC -simulates the generation and transmission of an electron beam down a LINAC. -Several steering coils, BPMs, and other typical accelerator components are -simulated to provide a realistic interaction between the operator and the -"LINAC". Since it is an entirely soft application, it will work on any -platform. An medm display is provided as the primary GUI. It can also be used -to experiment with other CA client tools.
- -To install the templates, use the following commands:
-mkdir- -- cd - <base>/bin/<arch>/makeBaseApp.pl -t vlinac vlinac - <base>/bin/<arch>/makeBaseApp.pl -i -t vlinac vlinac
For further information, see:
-<top>/vlinacApp/misc/README - <top>/vlinacApp/misc/Virtual_Linac_Info.pdf- -
record(stringin, "$(user)now")
-{
- field(DESC, "Current time and date")
- field(DTYP, "Soft Timestamp")
- field(INP, "@%Y-%m-%d %H:%M:%S.%03f")
-}
-
-Better error messages are now generated.
- -dbCaPutLinkCallback is a new function. It provides the ability to -implement record/driver support that does not complete until a channel access -put callback has completed. See the Application Developer's Guide for -details.
- -dbCaAddLinkCallback is a new function. The caller can provide a connect -and monitor callback. See the Application Developer's Guide for details.
- -Soft device that uses dbCaPutLinkCallback has been written for ao, bo, -calcout, longout, mbbo, mbboDirect, and stringout records. The dbd -definitions have been added to devSoft.dbd. In other to use the new support -the DTYP field is defined:
-field(DTYP,"Async Soft Channel")- -
The CALC and OCAL fields now have a size of 40 so that they are the same -as the calcRecord.
- -calcoutRecord now has associated device support. The default support will -act just like the old calcout. Support bis also available that uses -dbCaPutLinkCallback.
- -The fields ZRST,...,FFST are now special(SPC_MOD).
- -The fields ZRST,...,FFST are now special(SPC_MOD). init_record now checks -to see if state strings or values are defined during pass 0. Previously if -another record had a DBR_STRING link to an mbboRecord it thought the field -was a USHORT instead of an ENUM.
- -A new function has been added epicsStrPrintEscaped, which converts the -standard C escape characters to \xxx characters.
- -The 'system' command has been added to the IOC shell. To enable this
-command, add registrar(iocshSystemCommand) to an application
-database description file.
This has been removed from base.
- -'printf-style' functions like errlogPrintf have their arguments verified -against their format string when compiled with gcc.
- -The IOC shell now uses the vxWorks ledLib routines so command-line editing -is now the same in the IOC shell as it is in the vxWorks shell.
- -If the CA client library was searching for a PV name that was hosted on -more than one server a segmentation violation occurred when printing a -diagnostic message resulting in a failure of the CA client library. The bug -was introduced in R3.14.3. The code was tested on WIN32 prior to release, but -the problem has so far been reproduced only on Linux.
- -Thanks to Ernest Williams at the SNS for discovering and helping to -diagnose the problem.
- -If a CA circuit timed out during the connect sequence then the CA client -library called the applications's disconnect callback function indicating a -disconnect state transition when the channel was already known to be -disconnected. This has caused the sequencer to improperly maintain its -connected channel count. Other CA client side tools may also be impacted.
- -Recent versions of vxWorks appear to experience a connect failure if the -vxWorks IP kernel reassigns the same ephemeral TCP port number as was -assigned during a previous lifetime. The IP kernel on the vxWorks system -hosting the CA server might have a stale entry for this ephemeral port that -has not yet timed out which prevents the client from connecting with the -ephemeral port assigned by the IP kernel. Eventually, after EPICS_CA_CONN_TMO -seconds, the TCP connect sequence is aborted and the client library closes -the socket, opens a new socket, receives a new ephemeral port assignment, and -successfully connects.
- -Thanks to Mark Rivers for initially reporting the bug and energetically -assisting with identifying the cause.
- -The record processing trace output generated when the .TPRO
-field of a record is non-zero now includes the name of the thread that is
-actually doing the processing.
Previously if a dbGetLink failed on one of the input links, dbGetLink was -not called for the remaining links. Now it is.
- -put notify did not act properly if a record had disp=TRUE, i.e. if puts -are disabled. It now returns putNotifyPutDisabled.
- -This is no longer supported
- -devLib is now supported on vxWorks and RTEMS. It has been moved from -src/vxWorks/src to src/libCom/osi. devLibVirtualOS has been extended to -support allocating A24 addresss and an init method.
- -On POSIX systems if a Channel Access application spawns off 3rd party -software with an exec() call then all open file desriptors are inherited -unless the close-on-exec flag is set for each file descriptor. A new wrapper -function was created so that all sockets created in EPICS base will have the -close-on-exec flag set on POSIX systems. The function which spawns the CA -repeater with exec() used to close all open files except stdin/stdout/stderr. -This step was no longer required and therefore was removed from the code.
- -The tmpfile() function on windows requires that all temporary files be -stored in the root folder. The antelope (yacc) tool in base was calling -tmpfile() and this was causing problems at sites where win32 systems use -remotely mounted secure file systems. A wrapper function called "FILE * -epicsTempFile()" that creates a temporary file on WIN32 with a name epicsNNN -using one of the following paths was installed into libCom. It searches -starting with (1) below and stops when it finds a specified path that exists. -On POSIX systems, and systems that default to POSIX behavior, epicsTempFile() -simply calls tmpfile().
-For operating systems other than vxWorks, there is now a target file
-created in each iocBoot/ioc directory called
-envPaths, which performs the same functions as the
-cdCommands file in vxWorks but using environment variables. The
-entries in envPaths are derived from the contents of the
-application's configure/RELEASE file.
Database (.db and .dbd) filenames passed to
-dbLoadDatabase, dbLoadRecords and inside
-dbLoadTemplate substitutions files will now have environment
-variable macros expanded before opening. These are expressed using the
-standard ${MACRO} syntax. Inside a template substitutions file
-the filename must be enclosed in double quotation marks if macros are
-used.
The registration routine generated by the registerRecordDeviceDriver.pl
-perl script now includes the name of the application, thus requiring a
-one-line change to any IOC startup files produced with earlier R3.14 releases
-of base. The actual name is taken from a second command line argument
-supplied to the script by the modified make rules, and is derived from the
-name of the fully expanded dbd file from which the necessary information is
-extracted. The change needed to every startup script involves using this new
-name in place of the old registerRecordDeviceDriver. Assuming
-that your application's fully expanded dbd file is called
-example.dbd you would modify the lines
- dbLoadDatabase("dbd/example.dbd",0,0)
-registerRecordDeviceDriver(pdbbase)
-
-
-to become
- -
- dbLoadDatabase("dbd/example.dbd",0,0)
-example_registerRecordDeviceDriver(pdbbase)
-
-
--o outfile optionA commandline option -o has been added to the dbExpand
-program to allow the name of its output file to be specified. If there are
-any errors in the input file(s) the output file will not be generated or
-modified at all. The rules to expand DBD files have been changed to make use
-of this.
variable() supported in dbd filesDatabase definition (.dbd) files can now contain declarations of simple
-static variables, a facility intended for driver debugging purposes. These
-variable(name) or variable(name,type) declarations
-are preserved by dbExpand (type is int if omitted),
-and will be converted by registerRecordDeviceDriver.pl into code that
-registers them with iocsh. The variables themselves must be defined in some
-existing C or C++ code and marked using the macro
-epicsExportAddress(type,name). Only plain int and
-double types are supported.
macEnvExpand
- -A facility for performing macro expansion using environment variables as -macro definitions has been added to libCom/macLib. The ioc shell now performs -macro expansion using this on all input lines (other than comments) before -printing and executing the line.
- -iocsh var command
- -For simple applications such as controlling the value of debugging flags.
-Devlopers with more complex expression handling requirements should consider
-use of the cexp package. The available variables are defined
-by the new variable dbd file keyword.
iocshArgPersistentString
- -Tell iocsh to make a copy of the argument string before passing it to the -handler function.
- -epicsStrDup
- -Operating-system independent replacement for strdup().
- -epicsMessageQueue
- -The epicsMessageQueue API has been changed. All functions and methods to -receive a message now have an additional argument which specifies the size of -the receiver buffer. The receive functions/methods return -1 and the received -message is discarded if the received message will not fit in the buffer. See -the Application Developer's Guide (libCom OSI) for details.
- -This is an incompatible change. All R3.14.2 applications which use -epicsMessageQueue must be modified before they can be compiled and used with -R3.14.3
- -A bug occurring only in Microsoft Windows port of the error message -logging client was fixed. The symptoms were problems getting a Microsoft -Windows based IOC to make entries in the log file.
- -A bug occurring in the error message logging server where a partial -message arrives w/o a <CR> and then a <CR> from a previous -message was found in the input buffer was fixed. The problem must have -existed for a long time but probably was not occurring frequently. The -symptom was garbled output in the log file.
- -An IP kernel deadlock vulnerability occurring when vxWorks's tNetTask -calls logMsg because of a transient mbuf starvation situation has been fixed. -The fix was to not call logFdAdd for the log client's socket and instead -create a specialized vxWorks device driver which calls errlogPrintf for each -incoming message and then call logFdAdd for a file descriptor opened with -that device driver. The desirable functional change being errlogPrintf's -capability to discard messages when it gets behind (because of a transient -mbuf starvation situation). The fix also means that any code that calls -errlogAddListener on vxWorks, e.g. CMLOG, will now receive the logMsg -messages.
- -The symptom is a CA client program that fails with a segmentation -violation on Linux shortly after calling ca_task_exit()or -ca_context_destroy(). A fix will show up in R3.14.3. Regression tests were -updated to detect this type of problem.
- -There appears to be a bug in the Red Hat 7.3 process rundown where posix -thread support is defective when file scope destructors are being run. The -symptom was a hang during process exit. A workaround was installed.
- -A patch was made to allow multiple CA servers on MAC OSX. OSX is a recent -branch off of BSD and therefore requires socket option SO_REUSEPORT.
- -Build System
- -Major changes have been made to the build system. The good news is that -the rules for support and ioc applications are now greatly simplified. The -bad news is that it does mean changes for existing 3.14.1 applications. -Please see:
- -ConvertingR3.14.1AppsToR3.14.2
- -for details. If you are using the function DBD keyword it -no longer exists. Please read this conversion document for details.
- -Application Developer's Guide
- -The old chapter "New Feature's for 3.14" has been replaced by a new -chapter "Getting Started". Please read it. It provides a simplified set of -rules that can be used to build most support and ioc applications. Many minor -changes have also been made.
- -dbGetLink
- -A bug in dbGetLink resulted in nRequest not being given the value 0 if the -link is a constant link. This in turn caused the waveform record to always -set NORD=NELEM. Thus if an application trys to write a waveform via the -steps:
-prset->get_array_info(paddr,&no_elements,&offset); - write nNew elements into array >> - prset->put_array_info(paddr,nNew);- -
This sets NORD = nNew. But because of the dbGetLink bug, the soft device -support attached to the waveform record sets NORD to NELM.
- -This problem is fixed. The actual bug was in macros in dbAccessDefs.h
- -Access Security
- -The host names are now converted to lower case. This fixes -incompatibilities between various platforms.
- -string records
- -Both the stringin and stringout records have two new DBF_MENU fields: APST -and MPST. These control whether CA monitors are fired if the new VAL field -string is identical to the old one. The default (zero) menu value is "On -Change" with behaviour identical to before, set to "Always" if you want a -record to fire monitors every time the record is processed (analagous to -setting ADEL/MDEL=-1 for numeric record types).
- -epicsMessageQueue
- -A new facility that provides the capabilities of vxWorks msgQLib. See the -Application Developer's Guide (libCom OSI) for details.
- -epicsStdio and errlogPrintf
- -A new facility has been added to libCom described by epicsStdio.h. It -contains the functions epicsSnprintf and epicsVsnprintf. These are like the -C99 functions snprintf and vsnprintf, which are like sprintf and vsprintf -except that they accept a argument limiting the number of characters -written.
- -The errlogPrintf facility has been modified to use this facility. Thus it -is not longer subject to a possible buffer overflow.
- -scanPeriod
- -This is a new function provided by the Database Scanning facility. Given -an index for the choices defined by menuScan.h, it returns the scan period in -seconds. The argument can just be the scan field of a database record. If the -index is not associated with a periodic scan rate, the value 0.0 is -returned.
- -New epicsString.h function
- -A new function epicsStrCaseCmp has been added. It is like strcmp except -that it ignores case.
- -macLib
- -macParseDefns did not check for handle==NULL. The documentation for -macParseDefns was not correct.
- -function - New Database Definition Keyword
- -dbStaticLib and related programs now accept a new keyword in DBD files:
-function(name)- -
Where name is the name of a function with "C" linkage that is
-included in the IOC binary. This function will be automatically registered
-with the registry at the same time as the record/device/driver tables, and is
-intended to make using subroutine records much easier on non-vxWorks
-systems.. Prior R3.14 releases required there to be a static registration
-routine for such subroutines.
dbStaticLib has two additional routines to support this, dbDumpFunction() -and dbWriteFunctionFP(). dbDumpFunction has been added to the iocsh command -table.
- -iocsh
- -When executing commands from a script file, iocsh now echoes each command -to the terminal before execution. This makes it much easier to see where -errors are being reported.
- -Solaris build requirement
- -uname must be defined for builds on solaris hosts because it
-is used to determine the solaris version.
Linux build note
- -Under linux-x86 only, when SHARED_LIBRARIES=YES it is now possible to have -one or more directory paths burned into products as run-time locations for -the shared libraries. In configure/os/CONFIG_SITE.Common.linux-x86 add any -such absolute paths to the new make variable SHRLIB_SEARCH_DIRS -(lib/<arch> will be automatically appended to each directory given).
- -RULES.Db
- -A *[nn].db file will be created from an
-*.template and a *[nn].substitutions file ,where
-nn has a value between 0 and 99.
Support for 64 bit long
- -Many changes were made to support architectures on which a long is a 64 -bit integer. The basic change was to change:
-The changes include the following:
-Hardware Link Definitions
- -The various parts of hardware link definitions now accept HEX values, -e.g.
-field(INP,"L0 A1 C0 S0xa @")- -
NOTES:
-dbDumpFldDes
- -A macro has been defined so that client code can be written that is -compatible between 3.13 and 3.14.
- -epicsMutex for posix
-Mac OS X
- -Now supported as development platform and as IOC.
- -RTEMS
- -Additional RTEMS-pc386 network drivers are available
- -iocsh
- -Configurable iocsh command-line editing support (none, readline, -libtecla)
- -CA Reference Manual
- -Many additions.
- -CA Client Library
- -Bugs related to connection speed when creating new channels and other -channels are not found fixed. Bugs related to proper schedualing in file -descriptor manager based clients fixed. Many other bugs were fixed. -Performance was significantly improved.
- -Original CA Server Library (still employed in R3.14 by -iocCore)
- -A bug was fixed where the server was in rare situations using excessive -CPU.
- -Portable CA Server LIbrary
- -Several bugs were fixed when performing integration testing with the -channel access gateway.
- -GDD
- -Many bugs and missing features fixed.
- -dbCommon.dbd
- -Field UDF now has a promptgroup. This allows users to set UDF false via -DCTs.
- -errlog
- -errlog no longer contains an atexit that calls errlogFlush. This did not -work on all operating systems. cantProceed, iocsh, and ca_task_exit all call -errlogFlush. Other applications may also have to call if before -terminating.
- -mbboRecord
- -mbboRecord now implements method cvt_dbaddr for the VAL field. If no state -vales or state strings are defined then it sets field_type and dbr_field_type -to DBF_USHORT.
- -timeStamp changes
- -Changes have been made to:
-epicsTime.h now has the definitions:
-#define epicsTimeEventBestTime -1 -#define epicsTimeEventDeviceTime -2- -
These are values for the TSE field of dbCommon.
-If the TSEL field refers to the TIME -field of a record then recGblGetTimeStamp sets -TIME equal to the time it gets from the record the -TSEL references. This works for both database and channel -access links. In this case field TSE is not used.
-- -
aiRecord and aoRecord: Setting eoff=egul
- -Instead of init_record executing code like
- if ((pai->linr == menuConvertLINEAR) && pdset->special_linconv) {
- pai->eoff = pai->egul;
- }
-
-It now executes:
- if ((pai->eslo==1.0) && (pai->eoff==0.0)) {
- pai->eoff = pai->egul;
- }
-
-aoRecord has a similar change
- -This was done so that old device support which does not implement -special_linconv still works.
- -CA puts to disabled record
- -If a CA client issues a put to a disabled record then, when the record is -ena bled, database puts to the record will not make the record process until -a CA pu t is again issued. This is fixed.
- -TPRO - trace processing
- -If dbProcess is called recursively by different tasks, it did not properly -handle TPRO. Consider the following database:
-record(ao,"mrkao") {
- field(OUT,"mrkai CA")
- field(TPRO,"1")
-}
-record(ai,"mrkai") {
- field(TPRO,"1")
-}
-
-If a channel access put is sent to mrkao, no message is issued when mrkai -is processed.
- -This is now fixed.
- -TSconfigure
- -If in your st.cmd file you issue the command.
- -TSconfigure(0,0,0,0,0,0,1)
- -And set the TSE field of any record to a non zero value, then a crash will -occur when recGblGetTimeStamp is called.
- -This is now fixed.
- -calcoutRecord
- -nsev not sevr must be checked to decide if dbPutLink should be called.
- -dbCa
- -Whenever a connection is made, a request to retrieve the control, display, -and alarm linits and the precision and units is automatically issued. -Previously this was only done if dbCaGetAttributes was called. This it is no -longer necessary to call dbCaGetAttributes.
- -calcPerform
- -This now returns a non zero value if the result is nan (not a number).
- -Record Name Length
- -The size of the name field has been expanded from 29 to 61, i.e. record -names can now have 60 characters.
- -iocInit
- -initialProcess is now called before interruptAccept. This means that -initial processing will be done before periodically scanned and I/O Inter -scanned records start processing.
- -ellLib
- -Casts have been removed that suppressed valuable error messages
- -mbbiRecord
- -All existing manipulations of UDF in process() are removed and udf is set -FALSE when the raw value is successfully read.
- -selRecord
- -In do_sel udf is not set false at the beginning. If selm has an invalid -value recGblSetSevr(psel,SOFT_ALARM,MAJOR_ALARM) is called.
- -cdCommands file
- -Fixed a bug and revised the use of the IOCS_APPL_TOP setting in an -application's <top>/configure/CONFIG file (which specifies the path to -<top> as seen by the IOC) to apply the same modifications to all paths -output in the cdCommands file.
- -dbStaticLib
- -All routines with Recdes of Fielddes in their name are obsolete and -removed. A new routine dbDumpField replaces dbDumpFldDes.
- -devAiSoftRaw and devAoSoftRaw
- -A new state is defined for the LINR field. The name is "SLOPE", which -allows any device type to be used with manual settings of the EOFF and ESLO -fields. With this setting, the device support's special_linconv() routine is -only called when LINR=LINEAR.
- -The RTEMS TFTP remote filesystem driver now supports a limited form of the -chdir() system call. One restriction is that all pathnames passed to chdir() -must end in a / character, so IOC shell commands to change directories must -be given as
- -cd ../db/
- -The unbundled version of the sequencer has been build and tested with this -release. You must obtain a version of the sequencer that has been built -against alpha2.
- -A verion of the HPlanGpib support has been built and tested with this -release. Again you must obtain a version that builds with alpha2.
- -A new update to the Application Developer's Guide is available for this -release.
- -- ./configure/RULES.Db-
- ./configure/RULES.registerRecordDeviceDriver
- include $(TOP)/configure/RULES.registerRecordDeviceDriver-
- @$(PERL) $(TOOLS)/makeConfigAppInclude.pl $(T_A) $@ $(TOP)- to - -
- @$(PERL) $(TOOLS)/makeConfigAppInclude.pl $(EPICS_HOST_ARCH) $(T_A) $@ - $(TOP)- and add the line - -
- depends: install- to the bottom of the Makefile.
- include $(TOP)/configure/RULES.Db- to - -
- include $(TOP)/configure/RULES-
- DBDNAME = <name>App- to - -
- DBD += <name>- and remove the line
- DBDEXPAND = <name>Include.dbd- NOTE: If any of your *App/*Db/Makefiles contain "DBDNAME =" lines you - should make these same changes in that *Db dirctory.
- RECTYPES=<name>.h- to - -
- DBDINC+=<name>- change - -
- MENUS=<name>.h- to - -
- DBDINC+=<name>- change - -
- BPTS- to - -
- DBD- change - -
- INSTALLDB- to - -
- DB- change - -
- DBDINSTALL- to - -
- DBD-
- example_SRCS_DEFAULT += registerRecordDeviceDriver.c- to - -
- example_SRCS_DEFAULT += - <name>_registerRecordDeviceDriver.cpp- where <name> is the base name of a <name>.dbd file which was - created from a <name>Include.dbd file and which will be loaded in a - st.cmd or stcmd.host script (e.g. example).
- dbLoadDatabase("dbd/exampleApp.dbd")- to - -
- dbLoadDatabase("dbd/example.dbd")-
- dbLoadDatabase("../../dbd/exampleApp.dbd",0,0)- to - -
- dbLoadDatabase("../../dbd/example.dbd",0,0)-
GNU compiler builds are now determined by the value of EPICS_HOST_ARCH and -are no longer specified in CONFIG_SITE. All references to the ANSI (ACC/GCC) -and CPLUSPLUS (CCC/G++) macros have been removed.
- -Most of the library routines and files starting with the prefix osi have -been changed to start with epics. Several also had major changes to their -user interface. See the latest version of the Application Developer's Guide -for details.
- -
-
This is the first release of 3.14. This is the first release that supports -iocCore on platforms besides vxWorks.
- -iocCore is now supported on the following platforms:
-- Tornado II is required.-
- An open source real time operating system. It has been tested on - MVME167 and MC68360 processors. RTEMS also supports - powerPC.-
- Has been tested on solaris 2.6 and solaris 8 with Sun workshop 6.0 (C++ - 5.2). Sun workshop 5.0 (C++ 5.0) will not compile this version of - EPICS.-
- Has been tested on Redhat x86 platforms.-
- Testing has been done with visual C++ 6.0.-
A new version of the Application Developers Guide is available. The -following gives links to the new Application Developer's Guide and to RTEMS -information.
- -- http://www.aps.anl.gov/epics/base/R3-14/index.php- -
Most of the Application Developer's Guide has only minor changes. The -following are new.
-
-It must be emphasized that this is an alpha release.
- cd ~/base/mirror-3.14
- bzr tag R3.14.12-rcn + cd ~/base/mirror-3.15
+ bzr tag R3.15.1-rcn
cd ~/baseThis requires that the Bazaar keywords plugin is installed and configured properly. @@ -288,8 +288,8 @@ relevent roles unless the Release Manager designates otherwise:
bzr export --keywords=publish - --root=base-3.14.12-rcn - -r tag:R3.14.12-rcn - baseR3.14.12-rcn.tar.gz - mirror-3.14 + --root=base-3.15.1-rcn + -r tag:R3.15.1-rcn + baseR3.15.1-rcn.tar.gz + mirror-3.15
- cd ~/base/mirror-3.14
- bzr tag R3.14.12 + cd ~/base/mirror-3.15
+ bzr tag R3.15.1
cd ~/baseThis requires that the Bazaar keywords plugin is installed and configured properly. @@ -354,11 +354,6 @@ relevent roles unless the Release Manager designates otherwise:
bzr export --keywords=publish - --root=base-3.14.12 - -r tag:R3.14.12 - baseR3.14.12.tar.gz - mirror-3.14 + --root=base-3.15.1 + -r tag:R3.15.1 + baseR3.15.1.tar.gz + mirror-3.15