travis: fix for EXTRA with quotes/spaces

.appveyor.yml

@@ -42,15 +42,12 @@ skip_commits:
     - 'templates/*'
     - '**/*.html'
     - '**/*.md'
-    - '.travis.yml'
+
 
 #---------------------------------#
 #   build matrix configuration    #
 #---------------------------------#
 
-# Default build worker image
-image: Visual Studio 2015
-
 # Build Configurations: dll/static, regular/debug
 configuration:
   - dynamic
@@ -68,12 +65,12 @@ environment:
 
   matrix:
   - CMP: vs2019
-    SET: test00
     APPVEYOR_BUILD_WORKER_IMAGE: Visual Studio 2019
+    SET: test00
   - CMP: mingw
   - CMP: vs2019
-    VV: 0
     APPVEYOR_BUILD_WORKER_IMAGE: Visual Studio 2019
+    VV: 0
   - CMP: vs2019
     BASE: 3.15
     APPVEYOR_BUILD_WORKER_IMAGE: Visual Studio 2019

README.md

@@ -49,24 +49,20 @@ example.
 
 ## Supported CI Services
 
-### [Travis-CI](https://travis-ci.org/)
+### Travis-CI
  - Use different compilers (gcc, clang)
  - Use different gcc versions
  - Cross-compile for Windows 32bit and 64bit using MinGW and WINE
  - Cross-compile for RTEMS 4.9 and 4.10 (Base >= 3.16.2)
  - Compile on MacOS
  - Built dependencies are cached (for faster builds)
- 
-See specific **[ci-scripts on Travis-CI README](travis/README.md)** for more details.
 
-### [AppVeyor](https://www.appveyor.com/)
+### AppVeyor
  - Use different compilers (Visual Studio, MinGW)
  - Use different Visual Studio versions: \
   2008, 2010, 2012, 2013, 2015, 2017, 2019
  - Compile for Windows 32bit and 64bit
 
-See specific **[ci-scripts on AppVeyor README](appveyor/README.md)** for more details.
-
 ## How to Use the CI-Scripts
 
  1. Get an account on a supported CI service provider platform.
@@ -203,25 +199,14 @@ dependency builds. [default is `$HOME/.cache`]
 
 ## References: EPICS Modules Using ci-scripts
 
-[EPICS Base](https://github.com/epics-base/epics-base) and its submodules
+EPICS Base: [pvData](https://github.com/epics-base/pvDataCPP),
-[pvData](https://github.com/epics-base/pvDataCPP),
 [pvAccess](https://github.com/epics-base/pvAccessCPP),
 [pva2pva](https://github.com/epics-base/pva2pva)
 
-EPICS Modules:
+EPICS Modules: [PCAS](https://github.com/epics-modules/pcas),
-[ASYN](https://github.com/epics-modules/asyn),
+[ASYN](https://github.com/epics-modules/asyn)
-[devlib2](https://github.com/epics-modules/devlib2),
-[ecmc](https://github.com/epics-modules/ecmc),
-[ip](https://github.com/epics-modules/ip),
-[lua](https://github.com/epics-modules/lua),
-[MCoreUtils](https://github.com/epics-modules/MCoreUtils),
-[modbus](https://github.com/epics-modules/modbus),
-[motor](https://github.com/epics-modules/motor),
-[PCAS](https://github.com/epics-modules/pcas),
-[sscan](https://github.com/epics-modules/sscan),
-[vac](https://github.com/epics-modules/vac)
 
-ESS: [EtherCAT MC Motor Driver][ref.ethercatmc]
+ESS: [Motor driver (model 3) for EtherCAT Motion Controller][ref.ethercatmc]
 
 ITER: [OPC UA Device Support](https://github.com/ralphlange/opcua)
 
@@ -236,27 +221,22 @@ This will make all builds (not just for your module) verbose.
 
 Update the submodule in `.ci` first, then change your CI configuration
 (if needed) and commit both to your module. E.g., to update your Travis
-setup to release 2.3.4 of ci-scripts:
+setup to release 2.2.1 of ci-scripts:
 ```bash
 cd .ci
-git pull origin v2.3.4
+git pull origin v2.2.1
 cd -
 git add .ci
   # if needed:
   edit .travis.yml
   git add .travis.yml
-git commit -m "Update ci-scripts submodule to v2.3.4"
+git commit -m "Update ci-scripts submodule to v2.2.1"
 ```
 
 Check the example configuration files inside ci-scripts (and their
 changes) to see what might be needed and/or interesting to change
 in your configuration.
 
-Depending on the changes contained in the ci-scripts update, it might
-be advisable to clear the CI caches after updating ci-scripts. E.g.,
-a change in setting up EPICS Base will not be applied if Base is found 
-in the cache.
-
 **Why does running the scripts locally on my MacOS machine fail?**
 
 The ci-scripts for Travis-CI require Bash version 4.
@@ -293,7 +273,7 @@ in file LICENSE that is included with this distribution.
 <!-- Links -->
 [badge.version]: https://badge.fury.io/gh/epics-base%2Fci-scripts.svg
 [badge.travis]: https://travis-ci.org/epics-base/ci-scripts.svg?branch=master
-[badge.appveyor]: https://ci.appveyor.com/api/projects/status/8b578alg974axvux?svg=true
+[badge.appveyor]: https://ci.appveyor.com/api/projects/status/xwdv8fpxu0byp3hn?svg=true
 
 [reddit.bash]: https://www.reddit.com/r/bash/comments/393oqv/why_is_the_version_of_bash_included_in_os_x_so_old/
 

add-msi-to-314.patch

@@ -1,39 +1,7 @@
-diff --git a/config/RULES.Db b/config/RULES.Db
+diff -ruN ../3.14/src/dbtools/Makefile ./src/dbtools/Makefile
-index b4946c7aa..90b76ed08 100644
+--- ../3.14/src/dbtools/Makefile	2017-03-16 21:37:51.278140900 +0100
---- a/config/RULES.Db
++++ ./src/dbtools/Makefile	2020-04-06 12:40:51.723550846 +0200
-+++ b/config/RULES.Db
+@@ -11,6 +11,11 @@
-@@ -12,11 +12,7 @@
- #
- MAKEBPT		= $(EPICS_BASE_HOST_BIN)/makeBpt$(EXE)
- 
--ifndef MSI
--# Tool from R3.14 extensions bin, R3.13 extensions bin, or user path
--MSI = $(firstword $(wildcard $(EPICS_EXTENSIONS_HOST_BIN)/msi$(HOSTEXE) \
--         $(EPICS_EXTENSIONS)/bin/$(HOST_ARCH)/msi$(HOSTEXE)) msi$(HOSTEXE))
--endif
-+MSI = $(EPICS_BASE_HOST_BIN)/msi$(HOSTEXE)
- 
- DBEXPAND	= $(EPICS_BASE_HOST_BIN)/dbExpand$(EXE)
- DBST		= dbst
-diff --git a/configure/CONFIG_BASE b/configure/CONFIG_BASE
-index 7ee5a5b89..9a9793093 100644
---- a/configure/CONFIG_BASE
-+++ b/configure/CONFIG_BASE
-@@ -112,8 +112,5 @@ ifndef DBST
- DBST = dbst
- endif
- 
--ifndef MSI
--MSI = msi
--endif
--
-+MSI = $(EPICS_BASE_HOST_BIN)/msi$(HOSTEXE)
- 
-diff --git a/src/dbtools/Makefile b/src/dbtools/Makefile
-index 38ed52c9e..8655a5337 100644
---- a/src/dbtools/Makefile
-+++ b/src/dbtools/Makefile
-@@ -11,6 +11,11 @@ TOP=../..
  
  include $(TOP)/configure/CONFIG
  
@@ -45,11 +13,9 @@ index 38ed52c9e..8655a5337 100644
  INC += dbLoadTemplate.h
  INC += dbtoolsIocRegister.h
  
-diff --git a/src/dbtools/msi.c b/src/dbtools/msi.c
+diff -ruN ../3.14/src/dbtools/msi.c ./src/dbtools/msi.c
-new file mode 100644
+--- ../3.14/src/dbtools/msi.c	1970-01-01 01:00:00.000000000 +0100
-index 000000000..525d4f25b
++++ ./src/dbtools/msi.c	2013-05-13 19:00:43.000000000 +0200
---- /dev/null
-+++ b/src/dbtools/msi.c
 @@ -0,0 +1,798 @@
 +/*************************************************************************\
 +* Copyright (c) 2002 The University of Chicago, as Operator of Argonne

appveyor/.appveyor.yml.example-full

@@ -28,8 +28,6 @@ install:
 init:
   # Set autocrlf to make batch files work
   - git config --global core.autocrlf true
-  # print the connection info for RDP connections (see 'debugging' below)
-  #- ps: iex ((new-object net.webclient).DownloadString('https://raw.githubusercontent.com/appveyor/ci/master/scripts/enable-rdp.ps1'))
 
 # Set clone depth (do not fetch complete history)
 clone_depth: 50
@@ -41,7 +39,6 @@ skip_commits:
     - 'templates/*'
     - '**/*.html'
     - '**/*.md'
-    - '.travis.yml'
 
 #---------------------------------#
 #   build matrix configuration    #
@@ -51,9 +48,6 @@ skip_commits:
 # are executed sequentially, each one taking 10-15 minutes.
 # Consider this when defining your build matrix. (A full matrix build takes more than 8 hours.)
 
-# Default build worker image
-image: Visual Studio 2015
-
 # Build Configurations: dll/static, regular/debug
 configuration:
   - dynamic
@@ -68,8 +62,8 @@ environment:
 
   matrix:
   - CMP: vs2019
-    SET: test00
     APPVEYOR_BUILD_WORKER_IMAGE: Visual Studio 2019
+    SET: test00
   - CMP: mingw
   - CMP: vs2019
     APPVEYOR_BUILD_WORKER_IMAGE: Visual Studio 2019
@@ -135,8 +129,9 @@ on_finish:
 ## note that you will need to connect within the usual build timeout limit (60 minutes)
 ## so you may want to adjust the build matrix above to just build the one of interest
 
-# to print the RDP connection info
+# print the connection info
-# uncomment the appropriate line in the init: section above
+#init:
+#  - ps: iex ((new-object net.webclient).DownloadString('https://raw.githubusercontent.com/appveyor/ci/master/scripts/enable-rdp.ps1'))
 
 # block a failed build (until the watchdog barks)
 #on_failure:

appveyor/.appveyor.yml.example-mini

@@ -17,9 +17,6 @@ skip_commits:
     - 'templates/*'
     - '**/*.html'
     - '**/*.md'
-    - '.travis.yml'
-
-image: Visual Studio 2019
 
 # Build Configurations: dll/static, regular/debug
 configuration:
@@ -35,8 +32,10 @@ environment:
   matrix:
   - CMP: vs2019
     BASE: 7.0
+    APPVEYOR_BUILD_WORKER_IMAGE: Visual Studio 2019
   - CMP: vs2019
     BASE: 3.15
+    APPVEYOR_BUILD_WORKER_IMAGE: Visual Studio 2019
 
 # Platform: processor architecture
 platform:

appveyor/README.md

@@ -53,16 +53,3 @@
 
  6. Push your changes and check
     [ci.appveyor.com](https://ci.appveyor.com/) for your build results.
-
-## Known Issues
-
-#### Build Worker Images
-The AppVeyor documentation on build worker images doesn't seem to fully
-describe the way things are handled internally.
-
-The tested and suggested reproducible way of defining the build worker image
-is shown in the example configuration files:
-
- - Set the default image using the `image:` tag.
- - Override the image for specific jobs by setting the
-   `APPVEYOR_BUILD_WORKER_IMAGE` environment variable.

appveyor/do.py

@@ -56,7 +56,7 @@ ciscriptsdir = os.path.abspath(os.path.dirname(sys.argv[0]))
 if os.path.basename(ciscriptsdir) == 'appveyor':
     ciscriptsdir = ciscriptsdir.rstrip(os.pathsep+'appveyor')
 
-if 'BASE' in os.environ and os.environ['BASE'] == 'SELF':
+if 'BASE' not in os.environ or os.environ['BASE'] == 'SELF':
     building_base = True
     places['EPICS_BASE'] = '.'
 else:
@@ -81,9 +81,6 @@ isbase314 = False
 silent_dep_builds = True
 
 def host_info():
-    print('{0}AppVeyor Build Worker Image:{1} {2}'
-          .format(ANSI_CYAN, ANSI_RESET, os.environ['APPVEYOR_BUILD_WORKER_IMAGE']))
-
     print('{0}Python setup{1}'.format(ANSI_CYAN, ANSI_RESET))
     print(sys.version)
     print('PYTHONPATH')
@@ -330,7 +327,7 @@ def add_dependency(dep):
                     if 'BASE_3_14=YES' in f.read():
                         print('Adding MSI 1.7 to {0}'.format(place))
                         sys.stdout.flush()
-                        sp.check_call(['patch', '-p1', '-i', os.path.join(ciscriptsdir, 'add-msi-to-314.patch')],
+                        sp.check_call(['patch', '-p0', '-i', os.path.join(ciscriptsdir, 'add-msi-to-314.patch')],
                                       cwd=place)
         else:
             # force including RELEASE.local for non-base modules by overwriting their configure/RELEASE
@@ -540,7 +537,7 @@ def build(args):
 def test(args):
     setup_for_build(args)
     print('{0}Running the main module tests{1}'.format(ANSI_YELLOW, ANSI_RESET))
-    call_make(['tapfiles'])
+    call_make(['tapfiles'], parallel=0)
     call_make(['test-results'], parallel=0, silent=True)
 
 def doExec(args):

exampleApp/Db/Makefile

@@ -9,9 +9,6 @@ DB += dbExample2.db
 DB += dbSubExample.db
 DB += user.substitutions
 
-# Host-side expansion of substitutions file with MSI
-DB += dbExample3.db
-
 # If <anyname>.db template is not named <anyname>*.template add
 # <anyname>_TEMPLATE = <templatename>
 

exampleApp/Db/dbExample3.substitutions

@@ -1,8 +0,0 @@
-# Example host-side substitutions file
-
-file dbExample2.db {
-    pattern { user, no, scan }
-        { "ralph", 4, "1 second" }
-        { "ralph", 5, "2 second" }
-        { "ralph", 6, "5 second" }
-}

travis/.travis.yml.example-full

@@ -53,8 +53,7 @@ script:
 # SET         source setup file
 # ADD_MODULES extra modules (for a specific job)
 # EXTRA       content will be added to make command line
-# EXTRA1..5   additional arguments for the make command
+#             (embedded quotes must be escaped as \\\")
-#             (one argument per variable)
 # STATIC      set to YES for static build (default: NO)
 # TEST        set to NO to skip running the tests (default: YES)
 # VV          set to make build scripts verbose (default: unset)

travis/build.sh

@@ -6,36 +6,20 @@ set -e
 
 CACHEDIR=${CACHEDIR:-${HOME}/.cache}
 
-if [ "$BASE" = "SELF" ]
+eval $(grep "EPICS_BASE=" ${CACHEDIR}/RELEASE.local)
-then
-  EPICS_BASE=$CURDIR
-else
-  eval $(grep "EPICS_BASE=" ${CACHEDIR}/RELEASE.local)
-fi
 export EPICS_BASE
 
 [ -z "$EPICS_HOST_ARCH" -a -f $EPICS_BASE/src/tools/EpicsHostArch.pl ] && EPICS_HOST_ARCH=$(perl $EPICS_BASE/src/tools/EpicsHostArch.pl)
 [ -z "$EPICS_HOST_ARCH" -a -f $EPICS_BASE/startup/EpicsHostArch.pl ] && EPICS_HOST_ARCH=$(perl $EPICS_BASE/startup/EpicsHostArch.pl)
 export EPICS_HOST_ARCH
 
-# Base 3.15 doesn't have -qemu target architecture and needs an extra define
+[ -z "$EXTRA" ] && make -j2 || make -j2 "$EXTRA"
-[ -e $EPICS_BASE/configure/os/CONFIG.Common.RTEMS-pc386-qemu ] || EXTRA_QEMU=RTEMS_QEMU_FIXUPS=YES
-
-# use array variable to get the quoting right while using separate words for arguments
-[ -n "$EXTRA0" ] && EXTRA[0]="$EXTRA0"
-[ -n "$EXTRA1" ] && EXTRA[1]="$EXTRA1"
-[ -n "$EXTRA2" ] && EXTRA[2]="$EXTRA2"
-[ -n "$EXTRA3" ] && EXTRA[3]="$EXTRA3"
-[ -n "$EXTRA4" ] && EXTRA[4]="$EXTRA4"
-[ -n "$EXTRA5" ] && EXTRA[5]="$EXTRA5"
-
-make -j2 $EXTRA_QEMU "${EXTRA[@]}"
 
 ret=0
 
 if [ "$TEST" != "NO" ]
 then
-  make -j2 tapfiles || ret=$?
+  make tapfiles || ret=$?
 
   make -sk test-results
 fi

travis/prepare.sh

@@ -71,8 +71,7 @@ then
     mod_uc=${mod^^}
     eval add_dependency $mod_uc \${${mod_uc}:=master}
   done
-  [ -d ./configure ] && target=./configure/RELEASE.local || target=./RELEASE.local
+  [ -e ./configure ] && cp ${CACHEDIR}/RELEASE.local ./configure/RELEASE.local
-  cp ${CACHEDIR}/RELEASE.local $target
 
   fold_end check.out.dependencies
 fi
@@ -184,10 +183,8 @@ EOF
 RTEMS_VERSION=$RTEMS
 RTEMS_BASE=$HOME/.rtems
 EOF
-    # Base 3.15 doesn't have -qemu target architecture
-    [ -e $EPICS_BASE/configure/os/CONFIG.Common.RTEMS-pc386-qemu ] && QEMU=-qemu
     cat << EOF >> $EPICS_BASE/configure/CONFIG_SITE
-CROSS_COMPILER_TARGET_ARCHS += RTEMS-pc386$QEMU
+CROSS_COMPILER_TARGET_ARCHS += RTEMS-pc386-qemu
 EOF
   fi
 

travis/utils.sh

@@ -185,7 +185,7 @@ add_dependency() {
       if [ -e ${versionfile} ] && grep -q "BASE_3_14=YES" ${versionfile}
       then
         echo "Adding MSI 1.7 to $CACHEDIR/$dirname-$TAG"
-        ( cd $dirname-$TAG; patch -p1 < $SCRIPTDIR/../add-msi-to-314.patch )
+        ( cd $dirname-$TAG; patch -p0 < $SCRIPTDIR/../add-msi-to-314.patch )
       fi
     else
     # fix non-base modules that do not include the .local files in configure/RELEASE