Master File Attributes
These attributes are the same in binary and HDF5 file, but vary
depending on detector type.
Eiger
| Key |
Description |
| Version |
Version of the master file Current value:8.0 |
| Timestamp |
Timestamp of creation of master file |
| Detector Type |
Detector type |
| Timing Mode |
Timing Mode |
| Geometry |
Number of UDP ports in x and y dimension for complete detector |
| Image Size in bytes |
Image size in bytes per UDP port |
| Pixels |
Number of pixels in x and y dimension per UDP port |
| Max Frames Per File |
Maximum frames per file |
| Frame Discard Policy |
Receiever Frame discard policy for partial frames |
| Frame Padding |
Receiver Frame padding enable for partial frames |
| Scan Parameters |
Scanning mode on detector |
| Total Frames |
Total number of frames and triggers expected |
| Receiver Roi |
Receiver ROI in file including xmax and ymax |
| Dynamic Range |
Bits per pixel |
| Ten Giga |
10GbE enable for data |
| Exptime |
Exposure time |
| Period |
Period between frames |
| Threshold Energy |
Threshold energy |
| Sub Exptime |
Sub exposure time in 32 bit mode |
| Sub Period |
Sub period between frames in 32 bit mode |
| Quad |
Quad enable (hardware) |
| Number of rows |
Number of rows enabled for readout |
| Rate Corrections |
Rate Corrections |
| Frames in File |
Number of frames written to file by Receiver 0 |
| Frame Header Format |
Expected frame header format for the data files |
Jungfrau
| Key |
Description |
| Version |
Version of the master file Current value:8.0 |
| Timestamp |
Timestamp of creation of master file |
| Detector Type |
Detector type |
| Timing Mode |
Timing Mode |
| Geometry |
Number of UDP ports in x and y dimension for complete detector |
| Image Size in bytes |
Image size in bytes per UDP port |
| Pixels |
Number of pixels in x and y dimension per UDP port |
| Max Frames Per File |
Maximum frames per file |
| Frame Discard Policy |
Receiever Frame discard policy for partial frames |
| Frame Padding |
Receiver Frame padding enable for partial frames |
| Scan Parameters |
Scanning mode on detector |
| Total Frames |
Total number of frames and triggers expected |
| Receiver Roi |
Receiver ROI in file including xmax and ymax |
| Exptime |
Exposure time |
| Period |
Period between frames |
| Number of UDP Interfaces |
Number of UDP Interfaces enabled per module |
| Number of rows |
Number of rows enabled for readout |
| Frames in File |
Number of frames written to file by Receiver 0 |
| Frame Header Format |
Expected frame header format for the data files |
Gotthard II
| Key |
Description |
| Version |
Version of the master file Current value:8.0 |
| Timestamp |
Timestamp of creation of master file |
| Detector Type |
Detector type |
| Timing Mode |
Timing Mode |
| Geometry |
Number of UDP ports in x and y dimension for complete detector |
| Image Size in bytes |
Image size in bytes per UDP port |
| Pixels |
Number of pixels in x and y dimension per UDP port |
| Max Frames Per File |
Maximum frames per file |
| Frame Discard Policy |
Receiever Frame discard policy for partial frames |
| Frame Padding |
Receiver Frame padding enable for partial frames |
| Scan Parameters |
Scanning mode on detector |
| Total Frames |
Total number of frames and triggers expected |
| Receiver Roi |
Receiver ROI in file including xmax and ymax |
| Exptime |
Exposure time |
| Period |
Period between frames |
| Burst Mode |
Burst mode of detector |
| Frames in File |
Number of frames written to file by Receiver 0 |
| Frame Header Format |
Expected frame header format for the data files |
Mythen3
| Key |
Description |
| Version |
Version of the master file Current value:8.0 |
| Timestamp |
Timestamp of creation of master file |
| Detector Type |
Detector type |
| Timing Mode |
Timing Mode |
| Geometry |
Number of UDP ports in x and y dimension for complete detector |
| Image Size in bytes |
Image size in bytes per UDP port |
| Pixels |
Number of pixels in x and y dimension per UDP port |
| Max Frames Per File |
Maximum frames per file |
| Frame Discard Policy |
Receiever Frame discard policy for partial frames |
| Frame Padding |
Receiver Frame padding enable for partial frames |
| Scan Parameters |
Scanning mode on detector |
| Total Frames |
Total number of frames and triggers expected |
| Receiver Roi |
Receiver ROI in file including xmax and ymax |
| Dynamic Range |
Bits per pixel |
| Ten Giga |
10GbE enable for data |
| Period |
Period between frames |
| Counter Mask |
Mask of counters enabled |
| Exptime1 |
Exposure time of counter 1 |
| Exptime2 |
Exposure time of counter 2 |
| Exptime3 |
Exposure time of counter 3 |
| GateDelay1 |
Gate delay of counter 1 |
| GateDelay2 |
Gate delay of counter 2 |
| GateDelay3 |
Gate delay of counter 3 |
| Gates |
Number of gates |
| Threshold energies |
Threshold energy of all 3 counters |
| Frames in File |
Number of frames written to file by Receiver 0 |
| Frame Header Format |
Expected frame header format for the data files |
Moench
| Key |
Description |
| Version |
Version of the master file Current value:8.0 |
| Timestamp |
Timestamp of creation of master file |
| Detector Type |
Detector type |
| Timing Mode |
Timing Mode |
| Geometry |
Number of UDP ports in x and y dimension for complete detector |
| Image Size in bytes |
Image size in bytes per UDP port |
| Pixels |
Number of pixels in x and y dimension per UDP port |
| Max Frames Per File |
Maximum frames per file |
| Frame Discard Policy |
Receiever Frame discard policy for partial frames |
| Frame Padding |
Receiver Frame padding enable for partial frames |
| Scan Parameters |
Scanning mode on detector |
| Total Frames |
Total number of frames and triggers expected |
| Receiver Roi |
Receiver ROI in file including xmax and ymax |
| Exptime |
Exposure time |
| Period |
Period between frames |
| Number of UDP Interfaces |
Number of UDP Interfaces enabled per module |
| Number of rows |
Number of rows enabled for readout |
| Frames in File |
Number of frames written to file by Receiver 0 |
| Frame Header Format |
Expected frame header format for the data files |
Chip Test Board
| Key |
Description |
| Version |
Version of the master file Current value:8.0 |
| Timestamp |
Timestamp of creation of master file |
| Detector Type |
Detector type |
| Timing Mode |
Timing Mode |
| Geometry |
Number of UDP ports in x and y dimension for complete detector |
| Image Size in bytes |
Image size in bytes per UDP port |
| Pixels |
Number of pixels in x and y dimension per UDP port |
| Max Frames Per File |
Maximum frames per file |
| Frame Discard Policy |
Receiever Frame discard policy for partial frames |
| Frame Padding |
Receiver Frame padding enable for partial frames |
| Scan Parameters |
Scanning mode on detector |
| Total Frames |
Total number of frames and triggers expected |
| Receiver Roi |
Receiver ROI in file including xmax and ymax |
| Exptime |
Exposure time |
| Period |
Period between frames |
| Ten Giga |
Ten giga enable |
| ADC Mask |
Mask of channels enabled in ADC |
| Analog Flag |
Analog readout enable |
| Analog Samples |
Number of analog samples |
| Digital Flag |
Digital readout enable |
| Digital Samples |
Number of digital samples |
| Dbit Offset |
Digital offset of valid data in bytes |
| Dbit Reorder |
Reorder such that it groups each signal (0-63) from all the
different samples together |
| Dbit Bitset |
Digital 64 bit mask of bits enabled in receiver |
| Transceiver Mask |
Mask of channels enabled in Transceiver |
| Transceiver Flag |
Transceiver readout enable |
| Transceiver Samples |
Number of transceiver samples |
| Frames in File |
Number of frames written to file by Receiver 0 |
| Frame Header Format |
Expected frame header format for the data files |
