detectors/slsDetectorPackage
25
0
Fork 0
mirror of https://github.com/slsdetectorgroup/slsDetectorPackage.git synced 2025-05-27 13:10:43 +02:00
Code Issues Actions Packages Releases Activity
slsDetectorPackage/releases/RELEASE_9.0.0.txt

463 lines
12 KiB
Plaintext
Raw Blame History

SLS Detector Package Major Release 9.0.0 released on 26.11.2024
===============================================================
This document describes the differences between v9.0.0 and v8.0.2
CONTENTS
--------
1 Compilation Changes
2 New or Changed Features
2.1 Breaking API
2.2 Resolved or Changed Features
2.3 New Features
3 On-board Detector Server Compatibility
4 Firmware Requirements
5 Kernel Requirements
6 Download, Documentation & Support
2 Compilation Changes
=====================
* Python version
Minimum python version is changed from 3.6 to 3.8
* Pybind11 version
In-built version and the one picked up from github
updated from v2.11.0 to v2.13.6
* Python lib versioning
slsdet.__version__ now returns the package release version.
* Python version in conda build
Added python 3.13 also to conda build
2 New, Changed or Resolved Features
=====================================
2.1 Breaking API
==================
Receiver
--------
* Receiver callbacks
Brought much more metadata to receiver callbacks to construct the image.
Update MultiReceiverApp to reflect this change.
* File path
At start of acquisition or at rx_start command, the file path is only
then verified if it exists and created if it does not.
Client
------
* Removed receiver/publisher ZMQ IP
Command line: rx_zmqip gives a warning and does nothing
Python : rx_zmqip removed
C++ API: get/setRxZmqIP removed
Publisher zmq IP set to '0.0.0.0' or to listen on all interfaces.
The publisher will determine which interface to stream out from based on
the network route to the subscriber IP. Hence, receiver zmq IP is not
required.
* Write register, Set or Clear bit
Validation for this advanced feature has been removed by default.
One can force validation by using --validate in the command line or by
setting the validate option in the API.
ZMQ
---
* Publisher socket constructor does not take an IP anymore.
The details are above under 'Removed receiver/publisher ZMQ IP'.
GUI/ Client Callback
--------------------
* completeImage member in detectorData attribute now returns false only
if any the sub images (from different udp ports) have completeImage
set to false in the JSON header. This is set if therea are any missing
packets for that udp port on slsReceiver/slsMultiReceiver.
The different subimages are anyway not synchronized. This errs when
there are different missing images across multiple UDP ports.
The Gui does not show "complete image" in the status bar anymore.
If any of the udp ports have missing packets for that current disaplayed
image, then the "missing packets" will show in red in the status bar.
Detector Server
---------------
* [Mythen3] Only run clock can be set
Clock 0 is now the run clock and the only one that can be set.
The others are be read only.
This affects the following commands:
Command line or python API: clkdiv, clkfreq, clkphase, maxclkphaseshift
C++ API: get/setClockDivider, getClockFrequency, get/setClockPhase,
getMaxClockPhaseShift
* [Jungfrau] Temperature Control
Temperature control is enabled by default at on-board detector server
startup.
As before, the default temperature threshold is 65°C and crossing this
value will set a temperature event.
2.2 Resolved or Changed Features
================================
Compilation
-----------
* cmake_source_dir
Fixed compilation error when using python and adding the slsDetectorPackage
as a subfolder due to cmake source directory changing.
Client
------
* Command line Code Generation
The command line parsing code is now generated from a yaml file. This is
transparent to the user.
* Clearer error message about freeing shared memory.
Detector Server
---------------
* [Gotthard2] Chip reconfiguration
- Powering off/on the chip will now switch off chip configuration
property/ configure the chip every time.
- Switching off high voltage from a non zero value will now wait
10s to return for safety reasons.
- Powering off the chip requires high voltage to have been
switched off prior.
- Acquisition requires chip to have been configured prior.
* [Gotthard2] Burst mode options restricted
Burst mode external and continuous mode internal are not allowed to be set
anymore as they are anyway not implemented.
Receiver
--------
* [Gotthard I] fixed header stripping fixing segfault.
* Error or help message for invalid arguments to slsMultiReceiver.
Simulator
---------
* Refactored stop server to have better start up.
* Fixed possible memory leak when taking non blocking acquisitions.
* [Jungfrau] Valid gain values in data sent out. Previously, 2 was also sent out.
ZMQ
---
* Publiser socket constructor
- enables keep alive socket options to send heartbeat messages to prevent
discarded TCP flows if there is no packet for a longer period.
- enables IPv6 interfaces
* Prints specific error for ENOENT (endpoint does not exist)
2.3 New Features
================
Client
------
* Auto completion
bash_autocomplete.sh or zsh_autocomplete.sh must be sourced from the
main package folder to enable auto completion of commands and arguments
for the command line on that shell.
* sls_detector
New executable that can be used instead of 'sls_detector_get' and
'sls_detector_put' for most commands. It will infer from the number of
arguments, which executable (sls_detector_put or sls_detector_get) to use.
For the rare commands that cannot be inferred from the number of arguments,
it will complain accordingly.
* [Jungfrau] Timing Info Decoder (Advanced configuration)
Command line or python API: timing_info_decoder
C++ API: get/setTimingInfoDecoder. Options: SWISSFEL (Default), SHINE
* [Jungfrau] Collection Mode (Advanced configuration)
Command line or python API: collectionmode
C++ API: get/setCollectionMode. Options: ELECTRON, HOLE (Default)
If chip v1.1, also configures the chip afterwards.
* [Gotthard2] Next frame number
'Stop' in G2 25um is not synchronous and hence might trigger an extra set
of frames in the slave module, resulting in the next acquiistion starting
with inconsistent frame numbers between master and slave. Solved by
setting next frame number to the larger value (max + 1) after a stop command.
Requires a firmware update.
Command line or python API: nextframenumber
C++ API: get/setNextFrameNumber
Can set/get the starting frame number for the next acquistion.
* [Mythen3] Readout speed
Command line, python API: readoutspeed. Options: full_speed (10MHz),
half_speed (20MHz, default), quarter_speed (40MHz)
C++ API: get/setReadoutSpeed
Also affect:
Command line, python API: readoutspeedlist
C++ API: getReadoutSpeedList
* Sleep
Command line, python/ C++ API: sleep
Client sleeps for required time. Advanced command mainly for firmware
developers to use in config files.
* Xilinx Chip Test Board added
2 On-board Detector Server Compatibility
==========================================
Eiger 9.0.0
Jungfrau 9.0.0
Mythen3 9.0.0
Gotthard2 9.0.0
Gotthard 9.0.0
Moench 9.0.0
On-board Detector Server Upgrade
--------------------------------
From v6.1.0 (without tftp):
update only on-board detector server
Using command 'updatedetectorserver'
udpate both on-board detector server and firmware simultaneously
Using command 'update'
Instructions available at
https://slsdetectorgroup.github.io/devdoc/serverupgrade.html
3 Firmware Requirements
========================
Eiger 02.10.2023 (v32) (updated in 7.0.3)
Jungfrau 20.09.2023 (v1.5, HW v1.0) (updated in 8.0.0)
21.09.2023 (v2.5, HW v2.0) (updated in 8.0.0)
Mythen3 13.11.2024 (v2.0) (updated in 9.0.0)
Gotthard2 03.10.2024 (v1.0) (updated in 9.0.0)
Moench 26.10.2023 (v2.0) (updated in 8.0.2)
Gotthard 08.02.2018 (50um and 25um Master)
09.02.2018 (25 um Slave)
Detector Upgrade
----------------
The following can be upgraded remotely:
Eiger via bit files
Jungfrau via command <.pof>
Mythen3 via command <.rbf>
Gotthard2 via command <.rbf>
Moench via command <.pof>
Gotthard cannot be upgraded remotely
Except Eiger,
upgrade
Using command 'programfpga' or
udpate both on-board detector server and firmware simultaneously
Using command 'update'
Instructions available at
https://slsdetectorgroup.github.io/devdoc/firmware.html
4 Kernel Requirements
======================
Blackfin
--------
Latest version: Fri Oct 29 00:00:00 2021
Older ones will work, but might have issues with programming firmware via
the package.
Nios
-----
Compatible version: Mon May 10 18:00:21 CEST 2021
Kernel Upgrade
---------------
Eiger via bit files
Others via command
Commands: udpatekernel, kernelversion
Instructions available at
https://slsdetectorgroup.github.io/devdoc/commandline.html
https://slsdetectorgroup.github.io/devdoc/detector.html
https://slsdetectorgroup.github.io/devdoc/pydetector.html
5 Download, Documentation & Support
====================================
Download
--------
The Source Code:
https://github.com/slsdetectorgroup/slsDetectorPackage
Documentation
-------------
Installation:
https://slsdetectorgroup.github.io/devdoc/installation.html
Quick Start Guide:
https://slsdetectorgroup.github.io/devdoc/quick_start_guide.html
Firmware Upgrade:
https://slsdetectorgroup.github.io/devdoc/firmware.html
Detector Server upgrade:
https://slsdetectorgroup.github.io/devdoc/serverupgrade.html
Detector Simulators:
https://slsdetectorgroup.github.io/devdoc/virtualserver.html
Consuming slsDetectorPackage:
https://slsdetectorgroup.github.io/devdoc/consuming.html
API Examples:
https://github.com/slsdetectorgroup/api-examples
Command Line Documentation:
https://slsdetectorgroup.github.io/devdoc/commandline.html
C++ API Documentation:
https://slsdetectorgroup.github.io/devdoc/detector.html
C++ API Example:
https://slsdetectorgroup.github.io/devdoc/examples.html#
Python API Documentation:
https://slsdetectorgroup.github.io/devdoc/pygettingstarted.html
Python API Example:
https://slsdetectorgroup.github.io/devdoc/pyexamples.html
Receivers (including custom receiver):
https://slsdetectorgroup.github.io/devdoc/receivers.html
https://slsdetectorgroup.github.io/devdoc/slsreceiver.html
Detector UDP Header:
https://slsdetectorgroup.github.io/devdoc/udpheader.html
https://slsdetectorgroup.github.io/devdoc/udpdetspec.html
slsReceiver Zmq Format:
https://slsdetectorgroup.github.io/devdoc/slsreceiver.html#zmq-json-header-format
TroubleShooting:
https://slsdetectorgroup.github.io/devdoc/troubleshooting.html
https://slsdetectorgroup.github.io/devdoc/troubleshooting.html#receiver-pc-tuning-options
Further Documentation:
https://www.psi.ch/en/detectors/documentation
Info on Releases:
https://www.psi.ch/en/detectors/software
Support
-------
dhanya.thattil@psi.ch
erik.frojdh@psi.ch
View Git Blame Copy Permalink