detectors/slsDetectorPackage
25
0
Fork 0
mirror of https://github.com/slsdetectorgroup/slsDetectorPackage.git synced 2025-05-04 11:50:05 +02:00
Code Issues Actions Packages Releases Activity
slsDetectorPackage/RELEASE.txt

276 lines
7.0 KiB
Plaintext
Raw Blame History

SLS Detector Package Major Release 7.0.3 released on xx.xx.2023
===============================================================
This document describes the differences between v7.0.3 and v7.0.2
CONTENTS
--------
1 Resolved Issues
2 On-board Detector Server Compatibility
3 Firmware Requirements
4 Kernel Requirements
5 Download, Documentation & Support
1 Resolved Issues
=================
Firmware
--------
* [Eiger] Blocking trigger on quad
Previously, blocking software trigger on a quad was not blocking. Fixed
with firmware v32.
Client
------
* Limit port number max of 65535
Previously, one could set the port numbers (TCP, UDP, ZMQ) to values
higher than 65535 and also to 0. However, it was truncated to 16 bit
in the background, but not relayed to the user.
Now, it will throw if it is 0 or greater than 65535 (16 bit).
* Stopping acqusition for a single or subset of modules
The Detector API previously stopped all modules.
Now, it takes into account which modules the user wanted to stop.
* [Jungfrau] Stop in sync mode
When stopping acquisition in sync mode, only the master module sometimes
returns 'Idle' state instead of 'Stopped'. The software threw an
exception for the different states then.
Now, it does not throw and a fix will be added to the next firmware
release for the different states (with SW release: v8.0.0).
* [Eiger] Error in Stop
When stopping acquisition, if a half module were to give an error in a
rare case while the others succeeded, this would result in an re-attempt
to stop 9 more times before throwing an incorrect exception that it
could not stop.
Now, it is handled and will throw an exception of the error status
immediately.
Receiver
--------
* Limit TCP port number (command line) to max of 65535
Refer issue under 'Client'.
Detector Simulator
------------------
* Limit TCP port number (command line) to max of 65535
Refer issue under 'Client'.
Gui
---
* [Jungfrau] Color map of gain plot
Previously, color on the gain plot did not update after the first image,
unless there were x/y min/max changes or window resizing. Fixed.
Data Processing
---------------
* [Moench] Segmentation fault with moench03RawDataPrcess
Previously, it crashed when nframes > 0. Fixed.
* [Moench] Moench interpolation issues fixed.
2 On-board Detector Server Compatibility
==========================================
Eiger 7.0.3
Jungfrau 7.0.3
Mythen3 7.0.3
Gotthard2 7.0.3
Gotthard 7.0.3
Moench 7.0.3
Ctb 7.0.3
On-board Detector Server Upgrade
--------------------------------
From v6.1.0 (without tftp):
Using command 'updatedetectorserver'
From 5.0.0 (with tftp):
Using command 'copydetectorserver'
Instructions available at
https://slsdetectorgroup.github.io/devdoc/serverupgrade.html
3 Firmware Requirements
========================
Eiger 02.10.2023 (v32)
Jungfrau 16.05.2023 (v1.4.1, HW v1.0)
15.05.2023 (v2.4.1, HW v2.0)
Mythen3 24.01.2023 (v1.4)
Gotthard2 23.11.2022 (v0.3)
Gotthard 08.02.2018 (50um and 25um Master)
09.02.2018 (25 um Slave)
Moench 05.12.2022 (v0.3)
Ctb 05.12.2022 (v1.1)
Detector Upgrade
----------------
The following can be upgraded remotely:
Eiger via bit files
Jungfrau via command <.pof>
Mythen3 via command <.rbf>
Gotthard2 via command <.rbf>
Moench via command <.pof>
Ctb via command <.pof>
Gotthard cannot be upgraded remotely
Except Eiger,
upgrade
Using command 'programfpga' or
udpate both server and firmware simultaneously
Using command 'update'
Instructions available at
https://slsdetectorgroup.github.io/devdoc/firmware.html
4 Kernel Requirements
======================
Blackfin
--------
Latest version: Fri Oct 29 00:00:00 2021
Older ones will work, but might have issues with programming firmware via
the package.
Nios
-----
Compatible version: Mon May 10 18:00:21 CEST 2021
Kernel Upgrade
---------------
Eiger via bit files
Others via command
Commands: udpatekernel, kernelversion
Instructions available at
https://slsdetectorgroup.github.io/devdoc/commandline.html
https://slsdetectorgroup.github.io/devdoc/detector.html
https://slsdetectorgroup.github.io/devdoc/pydetector.html
5 Download, Documentation & Support
====================================
Download
--------
The Source Code:
https://github.com/slsdetectorgroup/slsDetectorPackage
Documentation
-------------
Installation:
https://slsdetectorgroup.github.io/devdoc/installation.html
Quick Start Guide:
https://slsdetectorgroup.github.io/devdoc/quick_start_guide.html
Firmware Upgrade:
https://slsdetectorgroup.github.io/devdoc/firmware.html
Detector Server upgrade:
https://slsdetectorgroup.github.io/devdoc/serverupgrade.html
Detector Simulators:
https://slsdetectorgroup.github.io/devdoc/virtualserver.html
Consuming slsDetectorPackage:
https://slsdetectorgroup.github.io/devdoc/consuming.html
API Examples:
https://github.com/slsdetectorgroup/api-examples
Command Line Documentation:
https://slsdetectorgroup.github.io/devdoc/commandline.html
C++ API Documentation:
https://slsdetectorgroup.github.io/devdoc/detector.html
C++ API Example:
https://slsdetectorgroup.github.io/devdoc/examples.html#
Python API Documentation:
https://slsdetectorgroup.github.io/devdoc/pygettingstarted.html
Python API Example:
https://slsdetectorgroup.github.io/devdoc/pyexamples.html
Receivers (including custom receiver):
https://slsdetectorgroup.github.io/devdoc/receivers.html
https://slsdetectorgroup.github.io/devdoc/slsreceiver.html
Detector UDP Header:
https://slsdetectorgroup.github.io/devdoc/udpheader.html
https://slsdetectorgroup.github.io/devdoc/udpdetspec.html
slsReceiver Zmq Format:
https://slsdetectorgroup.github.io/devdoc/slsreceiver.html#zmq-json-header-format
TroubleShooting:
https://slsdetectorgroup.github.io/devdoc/troubleshooting.html
https://slsdetectorgroup.github.io/devdoc/troubleshooting.html#receiver-pc-tuning-options
Further Documentation:
https://www.psi.ch/en/detectors/documentation
Info on Releases:
https://www.psi.ch/en/detectors/software
Support
-------
dhanya.thattil@psi.ch
erik.frojdh@psi.ch
View Git Blame Copy Permalink