mirror of
https://github.com/slsdetectorgroup/slsDetectorPackage.git
synced 2025-04-28 17:10:03 +02:00
80 lines
2.5 KiB
HTML
80 lines
2.5 KiB
HTML
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
|
|
|
|
<!--Converted with LaTeX2HTML 2012 (1.2)
|
|
original version by: Nikos Drakos, CBLU, University of Leeds
|
|
* revised and updated by: Marcus Hennecke, Ross Moore, Herb Swan
|
|
* with significant contributions from:
|
|
Jens Lippmann, Marek Rouchal, Martin Wilck and others -->
|
|
<HTML>
|
|
<HEAD>
|
|
<TITLE>MYTHEN Firmware</TITLE>
|
|
<META NAME="description" CONTENT="MYTHEN Firmware">
|
|
<META NAME="keywords" CONTENT="slsDetectorInstall">
|
|
<META NAME="resource-type" CONTENT="document">
|
|
<META NAME="distribution" CONTENT="global">
|
|
|
|
<META NAME="Generator" CONTENT="LaTeX2HTML v2012">
|
|
<META HTTP-EQUIV="Content-Style-Type" CONTENT="text/css">
|
|
|
|
<LINK REL="STYLESHEET" HREF="slsDetectorInstall.css">
|
|
|
|
</HEAD>
|
|
|
|
<BODY >
|
|
|
|
<H3><A NAME="SECTION00051100000000000000">
|
|
MYTHEN Firmware</A>
|
|
</H3>
|
|
|
|
<P>
|
|
To upgrade the firmware you need either a working version of the Altera
|
|
Quartus software or of the Quartus programmer, which can easily be downloaded
|
|
from:
|
|
<BR><TT><A NAME="tex2html4"
|
|
HREF="https://www.altera.com/download/programming/quartus2/pq2-index.jsp">https://www.altera.com/download/programming/quartus2/pq2-index.jsp</A></TT>
|
|
<P>
|
|
<BR>
|
|
|
|
<P>
|
|
Normally, installation of the software and of the driver for the
|
|
USB-Blaster (provided together with the MYTHEN detector) are simpler under
|
|
Windows.
|
|
|
|
<P>
|
|
Under Windows, the first time that you connect the USB-Blaster to one
|
|
of your USB ports, you will be asked to install new hardware. Set the path to
|
|
search for the driver to:
|
|
<code>C:\altera\80sp1\qprogrammer\drivers\usb-blasterp</code> (where
|
|
<code>C:\altera\80sp1\qprogrammer\</code> is assumed to be ther path where your
|
|
Quartus version is installed).
|
|
|
|
<OL>
|
|
<LI>After starting the Quartus programmer, click on Hardware Setup and in the
|
|
"Currently selected hardware" window select USB-Blaster.
|
|
</LI>
|
|
<LI>In the Mode combo box select "Active Serial Programming".
|
|
</LI>
|
|
<LI>Plug the end of your USB-Blaster WITH THE ADAPTER PROVIDED in the
|
|
connector ASMI on the MCS board taking care that pin1 corresponds to the one
|
|
indexed and with the rectangualr pad.
|
|
</LI>
|
|
<LI>Click on add file and from select the programming file provided when
|
|
the upgrade has been reccomended.
|
|
</LI>
|
|
<LI>Check "Program/Configure" and "Verify".
|
|
</LI>
|
|
<LI>Push the start button and wait until the programming process is
|
|
finished (progress bar top left).
|
|
</LI>
|
|
<LI>In case the programmer gives you error messages, check the polarity of
|
|
your cable (pin1 corresponds) and that you have selected the correct programming
|
|
connector.
|
|
</LI>
|
|
</OL>
|
|
|
|
<P>
|
|
<BR><HR>
|
|
|
|
</BODY>
|
|
</HTML>
|