detectors/slsDetectorPackage
25
0
Fork 0
mirror of https://github.com/slsdetectorgroup/slsDetectorPackage.git synced 2025-05-31 07:00:41 +02:00
Code Issues Actions Packages Releases Activity
slsDetectorPackage/RELEASE.txt

300 lines
9.1 KiB
Plaintext
Executable File
Raw Blame History

SLS Detector Package 6.0.0 released on xx.10.2021 (Major Release)
===================================================================
This document describes the differences between 6.0.0 and 5.2.0 releases.
CONTENTS
--------
1. New or Changed Features
2. Resolved Issues
3. Known Issues
4. Firmware Requirements
5. Download, Documentation & Support
1. New or Changed Features
==========================
Client
------
1. [Jungfrau] Chip version
Features for chipv1.1 incorporated
Command line: chipversion, API: getchipVersion
gets chip version (1.0 or 1.1)
chipv1.1 requires config_jungfrau.txt on detector server.
2. [Jungfrau] Chip configuration (only chipv1.1)
powering on the chip and changing settings will configure the chip.
Hence, required before acquisition.
3. [Jungfrau] Settings and Gain mode
Settings can be gain0 and highgain0. Gain mode can be dynamicgain,
forceswitchg1, forceswitchg2, fixg1, fixg2, fixg0. fixg0 must be
used with EXTRA caution as you can damage the detector.
Changing settings also changes dac values of 3 dacs () and reconfigures
chip (only v1.1)
4. [Jungfrau] Storage cells (only chipv1.1)
Additional number of storage cells not applicable for chipv1.1.
Storage cell start is only allowed from 0 - 3 for chipv1.1
(0 - 15 for chipv1.0).
5. [Gotthard2][Jungfrau] Filter Resistor
Command line: filterresistor, API: getFilterResistor/ setFilterResistor
Previous Command: filter, setFilter/ getFilter
Set Filter resistor. Increasing values for increasing resistance.
[Jungfrau] only for chipv1.1. Options: [0|1]. Default is 1.
[Gotthard2] Options: [0|1|2|3]. Default is 0.
6. [Jungfrau] Filter cell (only chipv1.1)
Command line: filtercell, API: getFilterCell/ setFilterCell
Set filter cell. Options: [0-12]. Advanced user command.
7. [Jungfrau] Comparator disable time (only chipv1.1)
Command line: comp_disable_time, API: getComparatorDisableTime/
setComparatorDisableTime
One can customize the period to disable comparator.
8. [Eiger][Jungfrau] Flip rows
Command line: fliprows, API: getFlipRows/ setFlipRows
Previous command: flippeddatax, setBottom/ getBottom
[Jungfrau] Flips rows in detector only for HW v2.0.
slsReceiver and slsDetectorGui will not flip them again.
[Eiger] same as before.
9. [Eiger][Jungfrau] Read n rows
Command line: readnrows, API: getReadNRows/ setReadNRows
Previous Command: readnlines, getPartialReadout/ setPartialReadout
[Eiger] same as before
[Jungfrau] Options: 8 - 512, multiples of 8. Default is 512.
10. [Gotthard2][Jungfrau] Current source
Command line: currentsource, API: getCurrentSource, setCurrentSource
Enable or disable current source. Default is disabled.
[Gotthard2] Can only enable or disable.
[Jungfrau] Can choose to fix, select source and choose normal or low
current. Normal/ low only for chipv1.1.
Select source is 0-63 for chipv1.0 and a 64 bit mask for chipv1.1.
11. Default dac
Command line: defaultdac, API: getDefaultDac/ setDefaultDac
change default value of a dac
[Jungfrau][Mythen3] Also change default value of dac for particular
setting.
12. Reset dacs
Command line: resetdacs, API: resetToDefaultDacs
Previous command: defaultdacs
Resets dacs to their default values or hard coded values.
13. [Mythen3] Gain Capacitance
Command line: gaincaps, API: getGainCaps/ setGainCaps
Set various gain capacitances.
14. [Gotthard2] Veto Streaming from chip
Command line: veto, API: getVeto/ setVeto
This command used to mean veto streaming from detector. Now, it means
veto streaming from chip (New feature). Default is disabled.
15. [Gotthard2] Veto streaming from detector
Command line: vetostream, API: getVetoStream, setVetoStream
Options: None, local link interface, 10 10GbE, Both
Default: None
16. [Gotthard2] Veto algorithm
Command line: vetoalg, API: getVetoAlgorithm/ setVetoAlgorithm
Set veto algorithm for each interface.
Options: hits, raw
17. [Eiger][Gotthard2][Mythen3] Module ID
Command line: moduleid, API: getModuleId
Previous command (Eiger only): serialnumber, getSerialNumber
Unique id read from txt file on detector and streamed out in udp header.
18. [Gotthard2]
Command line: dbitpipeline, API: getDBITPipeline/ setDBITPipeline
Set pipeline to latch digital bits. Options: 0-7
Detector servers
----------------
1. [Gotthard2] Bad Channels moved to a new register
2. [Gotthard2] Updated config file in detector server
Virtual servers
----------------
1. Artifical pixel values increasing by every packet, instead of every pixel.
2. Resolved Issues
==================
Detector Servers
----------------
1. [Gotthard2] Tolerance in time parameters.
Eg. 220 ns was being set to 215 ns, instead of 222ns.
1. [Jungfrau] Stopping in trigger mode and then switching to auto timing mode
blocks data streaming from detector. Workaround fix made in
detector server to reset core until next firmware release.
setting number of udp interfaces from 1 to 2, didnt get image in gui
3. Firmware Requirements
========================
Eiger
=====
Compatible version : 08.09.2020 (v27)
Jungfrau
========
Compatible version : 31.08.2021 (v1.2, PCB v1.0)
: 10.09.2021 (v2.2, PCB v2.0)
Gotthard
========
Compatible version : 08.02.2018 (50um and 25um Master)
: 09.02.2018 (25 um Slave)
Mythen3
=======
Compatible version : 10.09.2021 (development)
Gotthard2
=========
Compatible version : 27.05.2021 (development)
Moench
======
Compatible version : 05.10.2020 (v1.0)
Ctb
===
Compatible version : 05.10.2020 (v1.0)
Detector Upgrade
================
The following can be upgraded remotely:
Eiger via bit files
Jungfrau via command <.pof>
Mythen3 via command <.rbf>
Gotthard2 via command <.rbf>
Moench via command <.pof>
Ctb via command <.pof>
The following cannot be upgraded remotely:
Gotthard
Instructions available at
https://slsdetectorgroup.github.io/devdoc/firmware.html
and
https://slsdetectorgroup.github.io/devdoc/serverupgrade.html
5. Known Issues
===============
Receiver
--------
1. It does not handle readnrows or partial readout. Only the summary
is adjusted to print in red. However, it will still write complete
images with missing data padded. Roi will be implemented in future
that can be complimented with this feature to remove the additional
data in files.
2. Round robin is not implemented in receiver side, ie. one cannot configure
more than 1 receiver at a time. This will/might be done in the future.
6. Download, Documentation & Support
====================================
Download
--------
The Source Code:
https://github.com/slsdetectorgroup/slsDetectorPackage
Documentation
-------------
Installation:
https://slsdetectorgroup.github.io/devdoc/installation.html#
Firmware Upgrade:
https://slsdetectorgroup.github.io/devdoc/firmware.html
Detector Server upgrade:
https://slsdetectorgroup.github.io/devdoc/serverupgrade.html
Detector Simulators:
https://slsdetectorgroup.github.io/devdoc/virtualserver.html
Consuming slsDetectorPackage:
https://slsdetectorgroup.github.io/devdoc/consuming.html
API Examples:
https://github.com/slsdetectorgroup/api-examples
Command Line Documentation:
https://slsdetectorgroup.github.io/devdoc/commandline.html
Quick Start Guide:
https://slsdetectorgroup.github.io/devdoc/quick_start_guide.html
C++ API Documentation:
https://slsdetectorgroup.github.io/devdoc/detector.html
C++ API Example:
https://slsdetectorgroup.github.io/devdoc/examples.html#
Python API Documentation:
https://slsdetectorgroup.github.io/devdoc/pygettingstarted.html
Python API Example:
https://slsdetectorgroup.github.io/devdoc/pyexamples.html
Receivers (including custom receiver):
https://slsdetectorgroup.github.io/devdoc/receivers.html
https://slsdetectorgroup.github.io/devdoc/slsreceiver.html
TroubleShooting:
https://slsdetectorgroup.github.io/devdoc/troubleshooting.html
Further Documentation:
https://www.psi.ch/en/detectors/documentation
Info on Releases:
https://www.psi.ch/en/detectors/software
Support
-------
dhanya.thattil@psi.ch
erik.frojdh@psi.ch
View Git Blame Copy Permalink