mirror of
https://github.com/slsdetectorgroup/slsDetectorPackage.git
synced 2025-12-16 01:21:20 +01:00
e7a91d38f2
* update ctb regDefs, included fill level of adc, transceiver and DBit fifos, added enable registers for cont. readout
* fix fifo fill level range bug
* updated ctb RegDefs, increased size of fifo fill level register
* added register to read the firmware git hash
* ctb: added altchip_id read register
* start with unification of pattern machinery for xctb, ctb, mythen
* udate addrs for d-server internal matterhorn startup
* update xctb reg defs
* move pattern loopdef start
* added zero trimbits to matterhorn config
* Revert "added zero trimbits to matterhorn config"
This reverts commit 7c347badd5.
* added adjustable clocks on Xilinx-CTB
* added support for fractional dividers of runclk
* XCTB: make frequencies adjustable from python gui
* update docs
* added support for patternstart command to XCTB
* XCTB: map pattern_ram directly into memory, removed rw strobe
* refactor Mythen pattern control addresses
* test altera ctb with common addresses, removed ifdefs
* change ordering of regdefs
* updated python help for dbitclk, adcclk and runclk (khz)
* xilinx: moved the wait for firmware to measure the actual frequency to the server side and removed it in the pyctbgui side
* will not be anymore in developer branch
* make format (exception RegisterDefs.h), rewrite XILINX PLL to have less consstants in the code
* bug: mixing && for &
---------
Co-authored-by: Martin Mueller <martin.mueller@psi.ch>
Co-authored-by: Dhanya Thattil <dhanya.thattil@psi.ch>
New Chip Test Board Gui using Python
Prototype for a new python based GUI for the Chip Test Board
Getting started
git clone https://github.com/slsdetectorgroup/pyctbgui.git
cd pyctbgui
make #compiles the c extension inplace
./CtbGui
Display help for the Makefile
$ make help
check_format Check if source is formatted properly
clean Remove the build folder and the shared library
ext [DEFAULT] build c extension in place
format format code inplace using style in pyproject.toml
lint run ruff linter to check formatting errors
test Run unit tests using pytest
setup pre-commit hooks
pre-commit install