detectors/slsDetectorPackage
25
0
Fork 0
mirror of https://github.com/slsdetectorgroup/slsDetectorPackage.git synced 2025-04-22 03:40:04 +02:00
Code Issues Actions Packages Releases Activity
slsDetectorPackage/manual/manual-acq/main.cpp

899 lines
34 KiB
C++
Raw Blame History

//------------------------------------------------------------------------------------------------------
#include <iostream>
#include <vector>
#include <string>
#include <cstdlib>
#include <cstring>
#include <stdint.h>
#include <algorithm>
#include <functional>
#include <cctype>
#include <locale>
#include <sstream>
#include <unistd.h>
#include "sls_receiver_defs.h"
#include "slsReceiverUsers.h"
#include "sls_detector_defs.h"
#include "slsDetectorUsers.h"
#define GOTTHARD_25_TEST
//#define JUNGFRAU_TEST
//#define GOTTHARD_TEST
//======================================================================================================
// test configuration
//======================================================================================================
int acquisition_nb = 1; // number of acquisition to make
int acquisition_nb_ok = 0; // number of correct acquisition
uint64_t last_acquisition_received_frames; // number of received frames during the last acquisition
std::vector <int> acquisition_nb_list;
bool use_trace = false; // activate the acquisition log
//------------------------------------------------------------------------------------------------------
// GOTTHARD 25um
//------------------------------------------------------------------------------------------------------
#ifdef GOTTHARD_25_TEST
const int receivers_nb = 2; // number of receivers
const int receivers_rx_tcpport[receivers_nb] = {1954, 1955}; // tcp port for each receiver
const int detector_id = 0; // detector identifier for slsDetectorUsers constructor
const std::string detector_config_file_name = "gotthard25.config"; // configuration file name (must be present in the same folder of this application)
const long detector_receiver_fifo_depth = 2500;
double detector_exposure_time_sec = 0.005;
double detector_exposure_period_sec = 0.10;
const double detector_delay_after_trigger_sec = 0.0;
const std::string detector_trig_mode = "auto"; // "auto" or "trigger"
int64_t detector_nb_frames_per_cycle = 10;
const int64_t detector_nb_cycles = 1;
int detector_module_index[receivers_nb] = {0, 1};
#else
//------------------------------------------------------------------------------------------------------
// GOTTHARD
//------------------------------------------------------------------------------------------------------
#ifdef GOTTHARD_TEST
const int receivers_nb = 1; // number of receivers
const int receivers_rx_tcpport[receivers_nb] = {1954}; // tcp port for each receiver
const int detector_id = 0; // detector identifier for slsDetectorUsers constructor
const std::string detector_config_file_name = "gotthard25.config"; // configuration file name (must be present in the same folder of this application)
const long detector_receiver_fifo_depth = 2500;
double detector_exposure_time_sec = 0.005;
double detector_exposure_period_sec = 0.1;
const double detector_delay_after_trigger_sec = 0.0;
const std::string detector_trig_mode = "auto"; // "auto" or "trigger"
int64_t detector_nb_frames_per_cycle = 10;
const int64_t detector_nb_cycles = 1;
int detector_module_index[receivers_nb] = {0};
#else
//------------------------------------------------------------------------------------------------------
// JUNGFRAU
//------------------------------------------------------------------------------------------------------
#ifdef JUNGFRAU_TEST
const int receivers_nb = 1; // number of receivers
const int receivers_rx_tcpport[receivers_nb] = {1954}; // tcp port for each receiver
const int detector_id = 0; // detector identifier for slsDetectorUsers constructor
const std::string detector_config_file_name = "jungfrau_nanoscopium_switch.config"; // configuration file name (must be present in the same folder of this application)
const long detector_receiver_fifo_depth = 2500;
double detector_exposure_time_sec = 0.0005;
double detector_exposure_period_sec = 0.001;
const double detector_delay_after_trigger_sec = 0.0;
const std::string detector_trig_mode = "auto"; // "auto" or "trigger"
int64_t detector_nb_frames_per_cycle = 10000;
const int64_t detector_nb_cycles = 1;
const int detector_clock_divider = 1;
int detector_module_index[receivers_nb] = {0};
#endif
#endif
#endif
//------------------------------------------------------------------------------------------------------
// test instances
//------------------------------------------------------------------------------------------------------
std::vector<slsReceiverUsers *> receivers;
slsDetectorUsers * detector = NULL;
//------------------------------------------------------------------------------------------------------
// tools functions
//------------------------------------------------------------------------------------------------------
/** Define Colors to print data call back in different colors for different recievers */
#define PRINT_IN_COLOR(c,f, ...) printf ("\033[%dm" f RESET, 30 + c+1, ##__VA_ARGS__)
#define PRINT_SEPARATOR() cprintf(RED, "============================================\n")
/************************************************************************
* \brief cleans the shared memory used by the camera
************************************************************************/
void clean_shared_memory()
{
std::string cmd = "rm /dev/shm/slsDetectorPackage*;";
std::system(cmd.c_str());
}
/*******************************************************************
* \brief converts a version id to a string
* \return version in string format (uppercase & hexa)
*******************************************************************/
std::string convertVersionToString(int64_t in_version)
{
std::stringstream tempStream;
tempStream << "0x" << std::uppercase << std::hex << in_version;
return tempStream.str();
}
//==================================================================
// Related to commands (put & get)
//==================================================================
/*******************************************************************
* \brief Converts a standard string to args arguments
* \param in_command command in command line format
* \param out_argv output c-strings c-array
* \param out_argc output number of arguments of out_argv
*******************************************************************/
void convertStringToArgs(const std::string & in_command,
char * * & out_argv ,
int & out_argc )
{
out_argv = NULL;
out_argc = 0 ;
// filling a string vector with the command line elements
std::vector<std::string> elements;
std::stringstream ss(in_command);
while (ss)
{
std::string element;
ss >> element;
if(element.size() > 0)
{
elements.push_back(element);
}
}
// setting argc value
out_argc = elements.size();
// allocating argv array
out_argv = new char * [out_argc];
// filling argv array
for (int element_index = 0; element_index < out_argc; element_index++)
{
out_argv[element_index] = new char[elements[element_index].size() + 1]; // adding the allocation of end of c-string
strcpy(out_argv[element_index], elements[element_index].c_str()); // copying the string including the eos
}
}
/*******************************************************************
* \brief Releases args arguments
* \param in_out_argv output c-strings c-array*(static_cast<int *>(p))
* \param in_out_argc output number of arguments of out_argv
*******************************************************************/
void releaseArgs(char * * & in_out_argv ,
int & in_out_argc )
{
if(in_out_argv != NULL)
{
// releasing the c_strings array content
for (int element_index = 0; element_index < in_out_argc; element_index++)
{
delete [] in_out_argv[element_index];
}
// releasing the c_strings array
delete [] in_out_argv;
in_out_argv = NULL;
in_out_argc = 0 ;
}
}
/*******************************************************************
* \brief Executes a set command
* \param in_command command in command line format
* \param in_module_index module index
* \return the command result
*******************************************************************/
std::string setCmd(const std::string & in_command, int in_module_index=-1)
{
std::cout << "setCmd - execute set command:\"" << in_command << "\"" << std::endl;
char * * argv ;
int argc ;
std::string result;
convertStringToArgs(in_command, argv, argc);
if(argc > 0)
{
result = detector->putCommand(argc, argv, in_module_index);
}
releaseArgs(argv, argc);
std::cout << "result=\"" << result << "\"" << std::endl;
return result;
}
/*******************************************************************
* \brief Executes a get command
* \param in_command command in command line format
* \param in_module_index module index
* \return the command result
*******************************************************************/
std::string getCmd(const std::string & in_command, int in_module_index=-1)
{
std::cout << "getCmd - execute get command:\"" << in_command << "\"" << std::endl;
char * * argv ;
int argc ;
std::string result;
convertStringToArgs(in_command, argv, argc);
if(argc > 0)
{
result = detector->getCommand(argc, argv, in_module_index);
}
releaseArgs(argv, argc);
std::cout << "result=\"" << result << "\"" << std::endl;
return result;
}
//------------------------------------------------------------------------------------------------------
// Receivers callbacks
//------------------------------------------------------------------------------------------------------
/**
* Start Acquisition Call back
* slsReceiver writes data if file write enabled.
* Users get data to write using call back if registerCallBackRawDataReady is registered.
* @param filepath file path
* @param filename file name
* @param fileindex file index
* @param datasize data size in bytes
* @param p pointer to object
* \returns ignored
*/
int StartAcq(char* filepath, char* filename, uint64_t fileindex, uint32_t datasize, void*p){
cprintf(BLUE, "#### StartAcq: filepath:%s filename:%s fileindex:%llu datasize:%u ####\n",
filepath, filename, fileindex, datasize);
cprintf(BLUE, "--StartAcq: returning 0\n");
last_acquisition_received_frames = 0LL;
return 0;
}
/**
* Acquisition Finished Call back
* @param frames Number of frames caught
* @param p pointer to object
*/
void AcquisitionFinished(uint64_t frames, void*p){
cprintf(BLUE, "#### AcquisitionFinished: frames:%llu ####\n",frames);
last_acquisition_received_frames = frames;
}
/**
* Get Receiver Data Call back
* Prints in different colors(for each receiver process) the different headers for each image call back.
* @param metadata sls_receiver_header metadata
* @param datapointer pointer to data
* @param datasize data size in bytes.
* @param p pointer to object
*/
void GetData(char* metadata, char* datapointer, uint32_t datasize, void* p)
{
if(use_trace)
{
slsReceiverDefs::sls_receiver_header* header = (slsReceiverDefs::sls_receiver_header*)metadata;
const slsReceiverDefs::sls_detector_header & detectorHeader = header->detHeader;
PRINT_IN_COLOR (*(static_cast<int *>(p)),
"#### %d GetData: ####\n"
"frameNumber: %llu\t\texpLength: %u\t\tpacketNumber: %u\t\tbunchId: %llu"
"\t\ttimestamp: %llu\t\tmodId: %u\t\t"
"row: %u\t\tcolumn: %u\t\treserved: %u\t\tdebug: %u"
"\t\troundRNumber: %u\t\tdetType: %u\t\tversion: %u"
//"\t\tpacketsMask:%s"
"\t\tfirstbytedata: 0x%x\t\tdatsize: %u\n\n",
*(static_cast<int *>(p)),
(long long unsigned int)detectorHeader.frameNumber,
detectorHeader.expLength,
detectorHeader.packetNumber,
(long long unsigned int)detectorHeader.bunchId,
(long long unsigned int)detectorHeader.timestamp,
detectorHeader.modId,
detectorHeader.row,
detectorHeader.column,
detectorHeader.reserved,
detectorHeader.debug,
detectorHeader.roundRNumber,
detectorHeader.detType,
detectorHeader.version,
//header->packetsMask.to_string().c_str(),
((uint8_t)(*((uint8_t*)(datapointer)))),
datasize);
}
if((datapointer != NULL) && (datasize > 0))
{
char * buffer = new char[datasize];
memcpy(buffer, datapointer, datasize);
delete [] buffer;
}
}
//------------------------------------------------------------------------------------------------------
// CreateReceivers
//------------------------------------------------------------------------------------------------------
void CreateReceivers(void)
{
// preparing the args for receivers creation
char temp_port[10];
const int argc = 3;
char * args[argc] = {(char*)"slsReceiver", (char*)"--rx_tcpport", temp_port};
// creating the receivers instances
for(int i = 0 ; i < receivers_nb ; i++)
{
int ret = slsReceiverDefs::OK;
// changing the udp port in the args
sprintf(temp_port, "%d", receivers_rx_tcpport[i]);
// creating the receiver using the args
slsReceiverUsers * receiver = new slsReceiverUsers(argc, args, ret);
// managing a failed result
if(ret==slsReceiverDefs::FAIL)
{
delete receiver;
exit(EXIT_FAILURE);
}
// adding the receiver to the receivers container
receivers.push_back(receiver);
std::cout << "receiver (" << i << ") created - port (" << receivers_rx_tcpport[i] << ")" << std::endl;
// registering callbacks
// Call back for start acquisition
cprintf(BLUE, "Registering StartAcq()\n");
receiver->registerCallBackStartAcquisition(StartAcq, NULL);
// Call back for acquisition finished
cprintf(BLUE, "Registering AcquisitionFinished()\n");
receiver->registerCallBackAcquisitionFinished(AcquisitionFinished, NULL);
// Call back for raw data
cprintf(BLUE, "Registering GetData() \n");
receiver->registerCallBackRawDataReady(GetData, NULL);//&(detector_module_index[i]));
// starting tcp server thread
if (receiver->start() == slsReceiverDefs::FAIL)
{
delete receiver;
cprintf(BLUE,"Could not start receiver (%d)\n", i);
exit(EXIT_FAILURE);
}
}
}
//------------------------------------------------------------------------------------------------------
// ReleaseReceivers
//------------------------------------------------------------------------------------------------------
void ReleaseReceivers(void)
{
// deleting the receivers instances
for(int i = 0 ; i < receivers.size() ; i++)
{
slsReceiverUsers * receiver = receivers[i];
// stoping tcp server thread
receiver->stop();
delete receiver;
}
}
//------------------------------------------------------------------------------------------------------
// CreateDetector
//------------------------------------------------------------------------------------------------------
void CreateDetector(void)
{
int result;
// create the detector instance
detector = new slsDetectorUsers(result, detector_id);
if(result == slsDetectorDefs::FAIL)
{
std::cout << "slsDetectorUsers constructor failed! Could not initialize the camera!" << std::endl;
exit(EXIT_FAILURE);
}
// configuration file is used to properly configure advanced settings in the shared memory
result = detector->readConfigurationFile(detector_config_file_name);
if(result == slsDetectorDefs::FAIL)
{
std::cout << "readConfigurationFile failed! Could not initialize the camera!" << std::endl;
exit(EXIT_FAILURE);
}
// set detector in shared memory online (in case no config file was used) */
detector->setOnline(slsDetectorDefs::ONLINE_FLAG);
// set receiver in shared memory online (in case no config file was used) */
detector->setReceiverOnline(slsDetectorDefs::ONLINE_FLAG);
// disabling the file write by the camera
detector->enableWriteToFile(slsDetectorDefs::DISABLED);
// logging some versions informations
std::cout << "Detector developer : " << detector->getDetectorDeveloper() << std::endl;
std::cout << "Detector type : " << detector->getDetectorType() << std::endl;
std::cout << "Detector Firmware Version : " << convertVersionToString(detector->getDetectorFirmwareVersion()) << std::endl;
std::cout << "Detector Software Version : " << convertVersionToString(detector->getDetectorSoftwareVersion()) << std::endl;
// ensuring detector status is idle
int status = detector->getDetectorStatus();
if((status != slsDetectorDefs::IDLE) && (status != slsDetectorDefs::STOPPED))
{
std::cout << "Detector not ready: " << slsDetectorUsers::runStatusType(status) << std::endl;
exit(EXIT_FAILURE);
}
}
//------------------------------------------------------------------------------------------------------
// ReleaseDetector
//------------------------------------------------------------------------------------------------------
void ReleaseDetector(void)
{
if(detector != NULL)
{
detector->setReceiverOnline(slsDetectorDefs::OFFLINE_FLAG);
detector->setOnline(slsDetectorDefs::OFFLINE_FLAG);
delete detector;
detector = NULL;
}
}
//------------------------------------------------------------------------------------------------------
// RunAcquisition
//------------------------------------------------------------------------------------------------------
int RunAcquisition(void)
{
std::string trig_mode_label;
double exposure_time ;
double exposure_period;
double delay_after_trigger;
int64_t nb_frames_per_cycle;
int64_t nb_cycles;
int64_t nb_frames;
#ifdef JUNGFRAU_TEST
int clock_divider;
#endif
//----------------------------------------------------------------------------------------------------
// setting the receiver fifo depth (number of frames in the receiver memory)
detector->setReceiverFifoDepth(detector_receiver_fifo_depth);
//----------------------------------------------------------------------------------------------------
detector->setExposureTime (detector_exposure_time_sec , true); // in seconds
detector->setExposurePeriod (detector_exposure_period_sec, true); // in seconds
detector->setDelayAfterTrigger(detector_delay_after_trigger_sec, true); // in seconds
exposure_time = detector->setExposureTime (-1, true); // in seconds
exposure_period = detector->setExposurePeriod (-1, true); // in seconds
delay_after_trigger = detector->setDelayAfterTrigger(-1, true, 0); // in seconds
//----------------------------------------------------------------------------------------------------
// initing the number of frames per cycle and number of cycles
// to avoid problems during the trigger mode change.
detector->setNumberOfFrames(1);
detector->setNumberOfCycles(1);
// conversion of trigger mode label to trigger mode index
int trigger_mode_index = slsDetectorUsers::getTimingMode(detector_trig_mode);
// apply the trigger change
detector->setTimingMode(trigger_mode_index);
// converting trigger mode index to trigger mode label
trig_mode_label = slsDetectorUsers::getTimingMode(trigger_mode_index);
// setting the number of cycles
nb_cycles = detector->setNumberOfCycles(detector_nb_cycles);
// setting the number of frames per cycle
nb_frames_per_cycle = detector->setNumberOfFrames(detector_nb_frames_per_cycle);
// setting the gain mode
detector->setSettings(slsDetectorUsers::getDetectorSettings("dynamicgain"));
#ifndef JUNGFRAU_TEST
detector->setSettings(slsDetectorUsers::getDetectorSettings("mediumgain"));
#else
detector->setSettings(slsDetectorUsers::getDetectorSettings("dynamichg0"));
#endif
// computing the number of frames
nb_frames = nb_cycles * nb_frames_per_cycle;
//----------------------------------------------------------------------------------------------------
#ifdef JUNGFRAU_TEST
// clock divider
detector->setClockDivider(detector_clock_divider);
clock_divider = detector->setClockDivider(-1);
#endif
//----------------------------------------------------------------------------------------------------
std::cout << "receiver fifo depth : " << detector_receiver_fifo_depth << std::endl;
std::cout << "Exposure time in seconds : " << exposure_time << std::endl;
std::cout << "Exposure period in seconds : " << exposure_period << std::endl;
std::cout << "Delay after trigger in seconds : " << delay_after_trigger << std::endl;
std::cout << "Trigger mode : " << trig_mode_label << std::endl;
std::cout << "Nb frames per cycle : " << nb_frames_per_cycle << std::endl;
std::cout << "Nb cycles : " << nb_cycles << std::endl;
std::cout << "Nb frames : " << nb_frames << std::endl;
#ifdef JUNGFRAU_TEST
std::cout << "Clock divider : " << clock_divider << std::endl;
#endif
std::cout << "Estimated frame rate : " << (1.0 / exposure_period) << std::endl;
//----------------------------------------------------------------------------------------------------
// reset the number of caught frames in the sdk
detector->resetFramesCaughtInReceiver();
//----------------------------------------------------------------------------------------------------
const unsigned int sleep_time_sec = 1; // sleep the thread in seconds
// starting receiver listening mode
if(detector->startReceiver() == slsDetectorDefs::FAIL)
{
std::cout << "Could not start the receiver listening mode!" << std::endl;
return slsDetectorDefs::FAIL;
}
// starting real time acquisition in non blocking mode
// returns OK if all detectors are properly started, FAIL otherwise
if(detector->startAcquisition() == slsDetectorDefs::FAIL)
{
detector->stopReceiver();
std::cout << "Could not start real time acquisition!" << std::endl;
return slsDetectorDefs::FAIL;
}
for(;;)
{
// checking if the hardware acquisition is running
int status = detector->getDetectorStatus();
if((status == slsDetectorDefs::IDLE ) ||
(status == slsDetectorDefs::STOPPED) ||
(status == slsDetectorDefs::ERROR ))
{
// we stop the treatment
break;
}
else
// hardware acquisition is running, we are waiting for new frames not using the cpu during this time
{
usleep(sleep_time_sec * 1000 * 1000); // sleep the thread in seconds
}
}
// stopping receiver listening mode
if(detector->stopReceiver() == slsDetectorDefs::FAIL)
{
std::cout << "Could not stop real time acquisition!" << std::endl;
return slsDetectorDefs::FAIL;
}
//----------------------------------------------------------------------------------------------------
PRINT_SEPARATOR();
std::cout << "receiver fifo depth : " << detector_receiver_fifo_depth << std::endl;
std::cout << "Exposure time in seconds : " << exposure_time << std::endl;
std::cout << "Exposure period in seconds : " << exposure_period << std::endl;
std::cout << "Delay after trigger in seconds : " << delay_after_trigger << std::endl;
std::cout << "Trigger mode : " << trig_mode_label << std::endl;
std::cout << "Nb frames per cycle : " << nb_frames_per_cycle << std::endl;
std::cout << "Nb cyles : " << nb_cycles << std::endl;
std::cout << "Nb frames : " << nb_frames << std::endl;
#ifdef JUNGFRAU_TEST
std::cout << "Clock divider : " << clock_divider << std::endl;
#endif
std::cout << "Estimated frame rate : " << (1.0 / exposure_period) << std::endl;
if(last_acquisition_received_frames == nb_frames)
{
acquisition_nb_ok++;
return slsDetectorDefs::OK;
}
PRINT_SEPARATOR();
return slsDetectorDefs::FAIL;
}
//------------------------------------------------------------------------------------------------------
// test
//------------------------------------------------------------------------------------------------------
void Test(void)
{
try
{
PRINT_SEPARATOR();
std::cout << "CreateReceivers" << std::endl;
PRINT_SEPARATOR();
CreateReceivers();
PRINT_SEPARATOR();
std::cout << "CreateDetector" << std::endl;
PRINT_SEPARATOR();
CreateDetector();
PRINT_SEPARATOR();
std::cout << "RunAcquisition" << std::endl;
PRINT_SEPARATOR();
for(int acquisition_index = 0 ; acquisition_index < acquisition_nb ; acquisition_index++)
{
cprintf(MAGENTA, "Acquisition number : %d\n", acquisition_index);
if (RunAcquisition() == slsDetectorDefs::FAIL) {
acquisition_nb_list.push_back(acquisition_index);
}
}
PRINT_SEPARATOR();
std::cout << "ReleaseDetector" << std::endl;
PRINT_SEPARATOR();
ReleaseDetector();
PRINT_SEPARATOR();
std::cout << "ReleaseReceivers" << std::endl;
PRINT_SEPARATOR();
ReleaseReceivers();
PRINT_SEPARATOR();
std::cout << "Correct acquisition(s) " << acquisition_nb_ok << "/" << acquisition_nb << std::endl;
if (acquisition_nb - acquisition_nb_ok) {
std::cout << "Acquisition(s) gone wrong :" << std::endl;
for (int list_index = 0; list_index < acquisition_nb_list.size(); ++list_index) {
std::cout << acquisition_nb_list[list_index] << std::endl;
}
}
PRINT_SEPARATOR();
}
catch (...)
{
std::cout << "unknown exception!" << std::endl;
exit(EXIT_FAILURE);
}
}
std::string roi_result =
"detector 0:\n"
"0 255 -1 -1\n"
"detector 1:\n"
"1024 1279 -1 -1\n"
"\n"
"xmin xmax ymin ymax\n"
"0 255 -1 -1\n"
"2304 2559 -1 -1\n"
"roi 2\n";
#include <vector>
// use example :
// std::vector<slsReceiverDefs::ROI> rois;
// get_rois_from_string(roi_result, rois);
/*******************************************************************
* \brief Cuts the string in pieces
* \param[in] in_string source string
* \param[in] in_delimitor line delimitor
* \param[out] out_lines line container result
*******************************************************************/
void split_string_line(const std::string & in_string, const char in_delimitor, std::vector<std::string> & out_lines)
{
std::stringstream ss(in_string);
std::string sub_string;
while (getline(ss, sub_string, in_delimitor))
{
out_lines.push_back(sub_string);
}
}
/*******************************************************************
* \brief retrieve the ROIs from a string
* \param[in] in_rois_string string from "get roi" command
* \param[out] out_rois ROI container result (empty if no set ROI)
*******************************************************************/
void get_rois_from_string(const std::string & in_rois_string, std::vector<slsReceiverDefs::ROI> & out_rois)
{
out_rois.clear();
try
{
// cuts the string in lines
std::vector<std::string> lines;
split_string_line(in_rois_string, '\n', lines);
if(lines.size() >= 1)
{
// checks if no ROI ?
if(lines[0] != "roi 0")
{
for(int roi_index = 0 ; roi_index < 2 ; roi_index++)
{
if(lines.size() >= ((roi_index + 1) * 2)) // two lines per ROI definition
{
std::stringstream detector_name;
detector_name << "detector " << roi_index << ":";
// checks the first line
if(lines[roi_index * 2] == detector_name.str())
{
std::stringstream ss(lines[(roi_index * 2) + 1]);
slsReceiverDefs::ROI roi;
ss >> roi.xmin;
ss >> roi.xmax;
ss >> roi.ymin;
ss >> roi.ymax;
out_rois.push_back(roi);
}
}
}
}
}
}
catch(...)
{
out_rois.clear();
}
}
//------------------------------------------------------------------------------------------------------
// read_simple_option
//------------------------------------------------------------------------------------------------------
bool read_simple_option(int argc, char* argv[], const char * in_option_name)
{
int option_index = 1;
while(option_index < argc)
{
if (strcmp(argv[option_index], in_option_name) == 0)
{
std::cout << "Found option:" << in_option_name << std::endl;
return true;
}
option_index++;
}
return false;
}
//------------------------------------------------------------------------------------------------------
// read_option_value
//------------------------------------------------------------------------------------------------------
template <typename T> bool read_option_value(int argc, char* argv[], const char * in_option_name, T & out_option_value)
{
int option_index = 1;
while(option_index < argc)
{
if (strcmp(argv[option_index], in_option_name) == 0)
{
option_index++;
if(option_index < argc)
{
std::stringstream ss(std::string(argv[option_index]));
ss >> out_option_value;
std::cout << "Found option: " << in_option_name << " " << out_option_value << std::endl;
return true;
}
}
option_index++;
}
return false;
}
//------------------------------------------------------------------------------------------------------
// main
//------------------------------------------------------------------------------------------------------
int main (int argc, char* argv[])
{
if(read_simple_option(argc, argv, "-help") || read_simple_option(argc, argv, "--help"))
{
PRINT_SEPARATOR();
std::cout << "Options:" << std::endl;
std::cout << "-clean -> clean shared memory" << std::endl;
std::cout << "-trace -> activate acquisition log" << std::endl;
std::cout << "-exp <value> -> set exposure time value in seconds (for example: -exp 0.0005)" << std::endl;
std::cout << "-period <value> -> set period time value in seconds (for example: -period 0.001)" << std::endl;
std::cout << "-frames <value> -> set number of frames (for example: -frames 10000)" << std::endl;
std::cout << "-acq <value> -> set number of acquisition (for example: -acq 10)" << std::endl;
std::cout << std::endl;
std::cout << "example: ./manual-acq -clean -trace -acq 1 -exp 0.0005 -period 0.001 -frames 1000" << std::endl;
PRINT_SEPARATOR();
return 0;
}
if(read_simple_option(argc, argv, "-clean"))
{
PRINT_SEPARATOR();
std::cout << "Cleaning shared memory" << std::endl;
PRINT_SEPARATOR();
clean_shared_memory();
}
if(read_simple_option(argc, argv, "-trace"))
{
PRINT_SEPARATOR();
std::cout << "Activating acquisition log..." << std::endl;
PRINT_SEPARATOR();
use_trace = true;
}
int64_t frames_value;
if(read_option_value(argc, argv, "-frames", frames_value))
{
detector_nb_frames_per_cycle = frames_value;
}
double exp_value;
if(read_option_value(argc, argv, "-exp", exp_value))
{
detector_exposure_time_sec = exp_value;
}
double period_value;
if(read_option_value(argc, argv, "-period", period_value))
{
detector_exposure_period_sec = period_value;
}
int acq_nb;
if(read_option_value(argc, argv, "-acq", acq_nb))
{
acquisition_nb = acq_nb;
}
Test();
std::cout << "====================== ENDING ======================" << std::endl;
return 0;
}
//------------------------------------------------------------------------------------------------------
View Git Blame Copy Permalink