slsDetectorPackage/slsDetectorSoftware/commonFiles/sls_detector_funcs.h

/** 
    @internal

   function indexes to call on the server
   All set functions with argument -1 work as get, when possible 

*/
#ifndef SLS_DETECTOR_FUNCS_H
#define SLS_DETECTOR_FUNCS_H

enum detFuncs{

  // General purpose functions
  F_EXEC_COMMAND=0, /**< command is executed */
  F_GET_ERROR,  /**< return detector error status */

  // configuration  functions
  F_GET_DETECTOR_TYPE, /**< return detector type */
  F_SET_NUMBER_OF_MODULES, /**< set/get number of installed modules */
  F_GET_MAX_NUMBER_OF_MODULES, /**< get maximum number of installed modules */
  F_SET_EXTERNAL_SIGNAL_FLAG,  /**< set/get flag for external signal */
  F_SET_EXTERNAL_COMMUNICATION_MODE, /**< set/get  external communication mode (obsolete) */

  // Tests and identification
  F_GET_ID, /**< get detector id of version */
  F_DIGITAL_TEST,  /**< digital test of the detector */
  F_ANALOG_TEST,  /**<analog test of the detector */
  F_ENABLE_ANALOG_OUT,  /**<enable the analog output */
  F_CALIBRATION_PULSE,  /**<pulse the calibration input */

  // Initialization functions
  F_SET_DAC,   /**< set DAC value */
  F_GET_ADC,  /**< get ADC value */
  F_WRITE_REGISTER,  /**< write to register */
  F_READ_REGISTER, /**< read register */
  F_WRITE_MEMORY,  /**< write to memory */
  F_READ_MEMORY, /**< read memory */

  F_SET_CHANNEL,  /**< initialize channel */
  F_GET_CHANNEL,  /**< get channel register */
  F_SET_ALL_CHANNELS,  /**< initialize all channels */

  F_SET_CHIP,  /**< initialize chip */
  F_GET_CHIP,  /**< get chip status */
  F_SET_ALL_CHIPS,  /**< initialize all chips */

  F_SET_MODULE, /**< initialize module */
  F_GET_MODULE,  /**< get module status */
  F_SET_ALL_MODULES,  /**< initialize all modules */

  F_SET_SETTINGS,  /**< set detector settings */
  F_GET_THRESHOLD_ENERGY,  /**< get detector threshold (in eV) */
  F_SET_THRESHOLD_ENERGY,  /**< set detector threshold (in eV) */

  // Acquisition functions
  F_START_ACQUISITION, /**< start acquisition */
  F_STOP_ACQUISITION, /**< stop acquisition */
  F_START_READOUT, /**< start readout */
  F_GET_RUN_STATUS,  /**< get acquisition status */
  F_START_AND_READ_ALL,  /**< start acquisition and read all frames*/
  F_READ_FRAME,  /**< read one frame */
  F_READ_ALL,  /**< read alla frames */
  
  //Acquisition setup functions
  F_SET_TIMER,  /**< set/get timer value */
  F_GET_TIME_LEFT,  /**< get current value of the timer (time left) */

  F_SET_DYNAMIC_RANGE,  /**< set/get detector dynamic range */
  F_SET_READOUT_FLAGS,  /**< set/get readout flags */
  F_SET_ROI,  /**< set/get region of interest */
  F_SET_SPEED,  /**< set/get readout speed parameters */

  //Trimming
  F_EXECUTE_TRIMMING,   /**< execute trimming */

  F_EXIT_SERVER,  /**< turn off detector server */
  F_LOCK_SERVER, /**< Locks/Unlocks server communication to the given client */ 
  F_GET_LAST_CLIENT_IP,  /**< returns the IP of the client last connected to the detector */ 
  F_SET_PORT, /**< Changes communication port of the server */
  F_UPDATE_CLIENT, /**< Returns all the important parameters to update the shared memory of the client */

  F_CONFIGURE_MAC, /**< Configures MAC for Gotthard readout */
  F_LOAD_IMAGE,   /**< Loads Dark/Gain image to the Gotthard detector */

  // multi detector structures
  F_SET_MASTER, /**< sets master/slave flag for multi detector structures */
  F_SET_SYNCHRONIZATION_MODE, /**< sets master/slave synchronization mode for multidetector structures */
  F_READ_COUNTER_BLOCK, /**< reads the counter block memory for gotthard */
  F_RESET_COUNTER_BLOCK, /**< resets the counter block memory for gotthard */
  F_CALIBRATE_PEDESTAL,	/**< starts acquistion, calibrates pedestal and write back to fpga */

  F_ENABLE_TEN_GIGA,  /**< enable 10Gbe */
  F_SET_ALL_TRIMBITS,  /** < set all trimbits to this value */

  F_SET_CTB_PATTERN,  /** < loads a pattern in the CTB */
  F_WRITE_ADC_REG,  /** < writes an ADC register */

  F_SET_COUNTER_BIT,  		/** < set/reset counter bit in detector for eiger */
  F_PULSE_PIXEL,			/** < pulse pixel n number of times in eiger at (x,y)  */
  F_PULSE_PIXEL_AND_MOVE,	/** < pulse pixel n number of times and move relatively by x and y */
  F_PULSE_CHIP,				/** < pulse chip n number of times */

  F_SET_RATE_CORRECT,		/** < set/reset rate correction tau */
  F_GET_RATE_CORRECT,		/** < get rate correction tau */


  F_SET_NETWORK_PARAMETER,		/**< set network parameters such as transmission delay, flow control */

  F_PROGRAM_FPGA,			/**< program FPGA */
  F_RESET_FPGA,				/**< reset FPGA */
  F_POWER_CHIP,				/**< power chip */
  F_ACTIVATE,				/** < activate */
  F_PREPARE_ACQUISITION,	/** < prepare acquisition */
  F_CLEANUP_ACQUISITION,		/** < clean up after acquisition */

  F_THRESHOLD_TEMP,          /** < set threshold temperature */
  F_TEMP_CONTROL,            /** < set temperature control */
  F_TEMP_EVENT,              /** < set temperature event */

  F_AUTO_COMP_DISABLE,      /** < auto comp disable mode */
  F_STORAGE_CELL_START,     /** < storage cell start */

  F_CHECK_VERSION,			/** < check version compatibility */

  F_SOFTWARE_TRIGGER,		/** < software trigger */
  /* Always append functions hereafter!!! */

  /* Always append functions before!!! */
  NUM_DET_FUNCTIONS,
  TOO_MANY_FUNCTIONS_DEFINED=127 //you should get a compilation error if there are already so many functions defined. It conflicts with sls_receiver_funcs.h


};

#endif
/** @endinternal */