mirror of
https://github.com/slsdetectorgroup/slsDetectorPackage.git
synced 2026-11-18 17:24:04 +01:00
* refactoring such that the operations done of reg addresses is limited to the blackfin,nios and arm files * binaries in * include non incrememnting offsets in the fpga for block read and write (fpga register is constant) for example to read from fifo or write pattern to a reg etc * binaries in * bug fix: for loop in write block * binaries in
73 lines
2.6 KiB
C
73 lines
2.6 KiB
C
// SPDX-License-Identifier: LGPL-3.0-or-other
|
|
// Copyright (C) 2021 Contributors to the SLS Detector Package
|
|
#pragma once
|
|
|
|
#include <inttypes.h>
|
|
#include <stdbool.h>
|
|
#include <sys/types.h>
|
|
|
|
/** enable support for ARDY signal on interface to FPGA
|
|
* needed to properly translate avalon_mm_waitrequest in the CTB firmware
|
|
* https://www.analog.com/media/en/dsp-documentation/processor-manuals/bf537_hwr_Rev3.2.pdf
|
|
* page 274
|
|
* */
|
|
#define BFIN_EBIU_AMBCTL1_B2_ARDY_ENA_OFST (0)
|
|
#define BFIN_EBIU_AMBCTL1_B2_ARDY_ENA_MSK \
|
|
(1 << BFIN_EBIU_AMBCTL1_B2_ARDY_ENA_OFST)
|
|
#define BFIN_EBIU_AMBCTL1_B2_ARDY_POL_OFST (1)
|
|
#define BFIN_EBIU_AMBCTL1_B2_ARDY_POL_MSK \
|
|
(1 << BFIN_EBIU_AMBCTL1_B2_ARDY_POL_OFST)
|
|
|
|
#define BFIN_AMC_ACCESS_EXTENSION_ENA_VAL \
|
|
(BFIN_EBIU_AMBCTL1_B2_ARDY_ENA_MSK | BFIN_EBIU_AMBCTL1_B2_ARDY_POL_MSK)
|
|
#define BFIN_AMC_ACCESS_EXTENSION_FNAME \
|
|
"/sys/kernel/debug/blackfin/ebiu_amc/EBIU_AMBCTL1"
|
|
|
|
#define I2C_CLOCK_MHZ (131.25)
|
|
|
|
/* 16 bit register */
|
|
void bus_w16(u_int32_t offset, u_int16_t data);
|
|
u_int16_t bus_r16(u_int32_t offset);
|
|
|
|
/** 32 bit register */
|
|
void bus_w(u_int32_t offset, u_int32_t data);
|
|
u_int32_t bus_r(u_int32_t offset);
|
|
|
|
/**
|
|
* Write `size` bytes from `src` to the FPGA as 32-bit words,
|
|
* one at a time and in order.
|
|
* @param fixedAddress true: every word goes to `offset` (e.g. a FIFO).
|
|
* false: words go to consecutive addresses from `offset`.
|
|
* @returns OK, or FAIL if `size` is 0 or not a multiple of 4 bytes.
|
|
*/
|
|
int bus_w_block(u_int32_t offset, const void *src, size_t size,
|
|
bool fixedAddress);
|
|
int bus_r_block(u_int32_t offset, void *dest, size_t size, bool fixedAddress);
|
|
|
|
/** legacy: to be replaced at some point (returns int64_t via tcp) */
|
|
int64_t get64BitReg(int aLSB, int aMSB);
|
|
int64_t set64BitReg(int64_t value, int aLSB, int aMSB);
|
|
|
|
uint64_t getU64BitReg(int aLSB, int aMSB);
|
|
void setU64BitReg(uint64_t value, int aLSB, int aMSB);
|
|
|
|
/** literal register address value provided by client */
|
|
u_int32_t readRegister(u_int32_t offset);
|
|
void writeRegister(u_int32_t offset, u_int32_t data);
|
|
u_int32_t readRegister16(u_int32_t offset);
|
|
void writeRegister16(u_int32_t offset, u_int32_t data);
|
|
|
|
int mapCSP0(void);
|
|
|
|
/**
|
|
* Prepare the core cycle counter used by usleep_bf (called from mapCSP0)
|
|
*/
|
|
int initCycleCounter(void);
|
|
|
|
/**
|
|
* busy-wait for usecs on the core cycle counter
|
|
* @returns 0, or -1 without sleeping if the wait does not fit the 32-bit
|
|
* cycle count (about 8 s at 525 MHz)
|
|
*/
|
|
int usleep_bf(uint32_t us);
|