Files
slsDetectorPackage/cmk.sh
Erik Fröjdh bb18813808 Make the GUI Qt6 only
Drop the Qt5 build of the GUI: remove SLS_GUI_QT_MAJOR, the cmk.sh -G
flag (cmk.sh is back to the dev/mac-build version, -g builds the GUI)
and the Qt5 compatibility helpers in the plotting code and tests.

qVersionResolve only served the old qwt plots and is removed.

The plotting tests and the demo are now built with SLS_USE_TESTS
instead of always.
2026-11-13 09:43:08 +01:00

340 lines
6.4 KiB
Bash
Executable File

#!/bin/bash
# SPDX-License-Identifier: LGPL-3.0-or-other
# Copyright (C) 2021 Contributors to the SLS Detector Package
CMAKE="cmake3"
BUILDDIR="build"
INSTALLDIR=""
HDF5DIR="/opt/hdf5v1.10.0"
HDF5=0
COMPILERTHREADS=0
TEXTCLIENT=0
RECEIVER=0
GUI=0
DEBUG=0
PYTHON=0
TESTS=0
SIMULATOR=0
CTBGUI=0
MANUALS=0
MANUALS_ONLY_RST=0
MOENCHZMQ=0
CLEAN=0
REBUILD=0
CMAKE_PRE=""
CMAKE_POST=""
usage() { echo -e "
Usage: $0 [-b] [-c] [-d <HDF5 directory>] [-e] [-g] [-h] [-i] [-j <Number of threads>] [-k <CMake command>] [-l <Install directory>] [-m] [-n] [-p] [-r] [-s] [-t] [-u] [-z]
-[no option]: only make
-b: Builds/Rebuilds CMake files normal mode
-c: Clean
-d: HDF5 Custom Directory
-e: Debug mode
-g: Build/Rebuilds gui
-h: Builds/Rebuilds Cmake files with HDF5 package
-i: Builds tests
-j: Number of threads to compile through
-k: CMake command
-l: Install directory
-m: Manuals
-n: Manuals without compiling doxygen (only rst)
-p: Builds/Rebuilds Python API
-r: Build/Rebuilds only receiver
-s: Simulator
-t: Build/Rebuilds only text client
-u: Chip Test Gui
-z: Moench zmq processor
Rebuild when you switch to a new build and compile in parallel:
./cmk.sh -bj5
Rebuild python
./cmk.sh -p
For only make:
./cmk.sh
For make clean;make:
./cmk.sh -c
For using hdf5 without default dir /opt/hdf5v1.10.0:
./cmk.sh -h
For using hdf5 without custom dir /blabla:
./cmk.sh -h -d /blabla
For rebuilding cmake without hdf5 (Use this if you had previously run with hdf5 and now you dont want it)
./cmk.sh -b
For using multiple cores to compile faster:
(all these options work)
./cmk.sh -j9
./cmk.sh -cj9 #with clean
./cmk.sh -hj9 #with hdf5
./cmk.sh -j9 -h #with hdf
For rebuilding only certain sections
./cmk.sh -tg #only text client and gui
./cmk.sh -r #only receiver
" ; exit 1; }
while getopts ":bcd:eghij:k:l:mnpq:rstuz" opt ; do
case $opt in
b)
echo "Building of CMake files Required"
REBUILD=1
;;
c)
echo "Clean Required"
CLEAN=1
;;
d)
echo "New HDF5 directory: $OPTARG"
HDF5DIR=$OPTARG
;;
e)
echo "Compiling Options: Debug"
DEBUG=1
;;
g)
echo "Compiling Options: GUI"
GUI=1
REBUILD=1
;;
h)
echo "Building of CMake files with HDF5 option Required"
HDF5=1
REBUILD=1
;;
i)
echo "Compiling Options: Tests"
TESTS=1
;;
j)
echo "Number of compiler threads: $OPTARG"
COMPILERTHREADS=$OPTARG
;;
k)
echo "CMake command: $OPTARG"
CMAKE="$OPTARG"
;;
l)
echo "CMake install directory: $OPTARG"
INSTALLDIR="$OPTARG"
;;
m)
echo "Compiling Manuals"
MANUALS=1
;;
n)
echo "Compiling Manuals (Only RST)"
MANUALS_ONLY_RST=1
;;
p)
echo "Compiling Options: Python"
PYTHON=1
REBUILD=1
;;
r)
echo "Compiling Options: Receiver"
RECEIVER=1
REBUILD=1
;;
s)
echo "Compiling Options: Simulator"
SIMULATOR=1
;;
t)
echo "Compiling Options: Text Client"
TEXTCLIENT=1
REBUILD=1
;;
u)
echo "Compiling Options: Chip Test Gui"
CTBGUI=1
;;
z)
echo "Compiling Moench Zmq Processor"
MOENCHZMQ=1
;;
\?)
echo "Invalid option: -$OPTARG"
usage
exit 1
;;
:)
echo "Option -$OPTARG requires an argument."
usage
exit 1
;;
esac
done
#python
if [ $PYTHON -eq 1 ]; then
CMAKE_POST+=" -DSLS_USE_PYTHON=ON "
echo "Enabling Compile Option: Python"
fi
if [ $TEXTCLIENT -eq 0 ] && [ $RECEIVER -eq 0 ] && [ $GUI -eq 0 ]; then
#CMAKE_POST+=" -DSLS_USE_TEXTCLIENT=ON -DSLS_USE_RECEIVER=ON -DSLS_USE_GUI=ON "
CMAKE_POST+=" -DSLS_USE_TEXTCLIENT=ON -DSLS_USE_RECEIVER=ON -DSLS_USE_GUI=OFF "
echo "Enabling Compile Option: TextClient, Receiver and GUI"
else
if [ $TEXTCLIENT -eq 1 ]; then
CMAKE_POST+=" -DSLS_USE_TEXTCLIENT=ON -DSLS_USE_RECEIVER=OFF "
echo "Enabling Compile Option: TextClient"
fi
if [ $RECEIVER -eq 1 ]; then
CMAKE_POST+=" -DSLS_USE_RECEIVER=ON "
echo "Enabling Compile Option: Receiver"
fi
if [ $GUI -eq 1 ]; then
CMAKE_POST+=" -DSLS_USE_GUI=ON "
echo "Enabling Compile Option: GUI"
fi
fi
#build dir doesnt exist
if [ ! -d "$BUILDDIR" ] ; then
echo "No Build Directory. Building of Cmake files required"
mkdir $BUILDDIR;
REBUILD=1
else
#rebuild not requested, but no makefile
if [ $REBUILD -eq 0 ] && [ ! -f "$BUILDDIR/Makefile" ] ; then
echo "No Makefile. Building of Cmake files required"
REBUILD=1
fi
fi
#Debug
if [ $DEBUG -eq 1 ]; then
# CMAKE_POST+=" -DCMAKE_BUILD_TYPE=Debug "
CMAKE_POST+=" -DCMAKE_BUILD_TYPE=Debug -DSLS_USE_SANITIZER=ON "
echo "Debug Option enabled"
fi
#Simulator
if [ $SIMULATOR -eq 1 ]; then
CMAKE_POST+=" -DSLS_USE_SIMULATOR=ON "
echo "Simulator Option enabled"
fi
#Manuals
if [ $MANUALS -eq 1 ]; then
CMAKE_POST+=" -DSLS_BUILD_DOCS=ON "
echo "Manuals Option enabled"
fi
#Moench zmq processor
if [ $MOENCHZMQ -eq 1 ]; then
CMAKE_POST+=" -DSLS_USE_MOENCH=ON "
echo "Moench Zmq Processor Option enabled"
fi
#Chip Test Gui
if [ $CTBGUI -eq 1 ]; then
CMAKE_POST+=" -DSLS_USE_CTBGUI=ON "
echo "CTB Gui Option enabled"
fi
#Tests
if [ $TESTS -eq 1 ]; then
CMAKE_POST+=" -DSLS_USE_TESTS=ON "
echo "Tests Option enabled"
fi
#hdf5 rebuild
if [ $HDF5 -eq 1 ]; then
# CMAKE_PRE+="HDF5_ROOT="$HDF5DIR
CMAKE_POST+=" -DCMAKE_INSTALL_PREFIX="$HDF5DIR
CMAKE_POST+=" -DSLS_USE_HDF5=ON "
#normal mode rebuild
else
CMAKE_POST+=" -DSLS_USE_HDF5=OFF "
fi
#install
if [ -n "$INSTALLDIR" ]; then
CMAKE_POST+=" -DCMAKE_INSTALL_PREFIX=$INSTALLDIR"
CMAKE_POST+=" -DCMAKE_FIND_ROOT_PATH=$INSTALLDIR"
fi
#enter build dir
#pushd $BUILDDIR;
cd $BUILDDIR;
echo "in "$PWD
#cmake
if [ $REBUILD -eq 1 ]; then
rm -f CMakeCache.txt
BUILDCOMMAND="$CMAKE_PRE $CMAKE $CMAKE_POST .."
echo $BUILDCOMMAND
eval $BUILDCOMMAND
fi
#make clean
if [ $CLEAN -eq 1 ]; then
make clean;
fi
#make
if [ $COMPILERTHREADS -gt 0 ]; then
if [ $MANUALS -eq 0 ] && [ $MANUALS_ONLY_RST -eq 0 ]; then
BUILDCOMMAND="make -j$COMPILERTHREADS"
echo $BUILDCOMMAND
eval $BUILDCOMMAND
else
if [ $MANUALS -eq 1 ]; then
BUILDCOMMAND="make docs -j$COMPILERTHREADS"
echo $BUILDCOMMAND
eval $BUILDCOMMAND
else
BUILDCOMMAND="make rst -j$COMPILERTHREADS"
echo $BUILDCOMMAND
eval $BUILDCOMMAND
fi
fi
else
if [ $MANUALS -eq 0 ] && [ $MANUALS_ONLY_RST -eq 0 ]; then
echo "make"
make
else
if [ $MANUALS -eq 1 ]; then
echo "make docs"
make docs
else
echo "make rst"
make rst
fi
fi
fi
#install
if [ -n "$INSTALLDIR" ]; then
make install
# popd
# $CMAKE --build $BUILDDIR --target install
fi