SLS Detector Package Minor Release 7.0.0 released on 25.11.2021
===============================================================

This document describes the differences between v7.0.0 and v6.x.x   



    CONTENTS
    --------
    1.  New or Changed Features
    2.  Resolved Issues
    3.  Firmware Requirements
    4.  Kernel Requirements
    5.  Download, Documentation & Support




1. New or Changed Features
==========================

- Fixed minor warnings (will fix commandline print of excess packets for missing packets)
- ctb slow adcs and any other adcs (other than temp) goes to the control Server
- number of udp interfaces is 2 for Eiger (CHANGE IN API??)
- added module id for virtual servers into the udp header
- refactoring (rxr)
- fixed patsetbit and patsetmask for moench
- changed default vref of adc9257 to 2V for moench (from 1.33V)
- moench and ctb - can set the starting frame number of next acquisition
- mythen server kernel check incompatible (cet timezone)
- rx_arping
- rx_threadsids max is now 9 (breaking api)
- fixed datastream disabling for eiger. Its only available in 10g mode.
- m3 server crash (vthrehsold)
- allow vtrim to be interpolated for Eiger settings
- m3 setThresholdEnergy and setAllThresholdEnergy was overwriting gaincaps with settings enum
- can set localhost with virtual server with minimum configuration: (hostname localhost, rx_hostname localhost, udp_dstip auto)
- increases the progress according to listened index. (not processed index)
- current frame index points to listened frame index (not processed index)
- when in discard partial frames or empty mode, the frame number doesnt increase by 1, it increases to that number (so its faster)
- file write disabled by default
- start non blocking acquisition at modular level
- connect master commands to api (allow set master for eiger)
--ignore-config command line
- command line argument 'master' mainly for virtual servers (also master/top for real eiger), only one virtual server for eiger, use command lines for master/top
- stop servers also check for errors at startup( in case it was running with an older version)
- hostname cmd failed when connecting to servers in update mode (ctb, moench, jungfrau, eiger)
- missingpackets signed (negative => extra packets)


2. Resolved Issues
==================


3. Firmware Requirements
========================
        
    Eiger
    =====  
    Compatible version : 08.10.2021 (v29)
    
    Jungfrau
    ========       
    Compatible version : 31.08.2021 (v1.2, PCB v1.0) 
                       : 08.10.2021 (v2.2, PCB v2.0)

    Gotthard
    ========   
    Compatible version : 08.02.2018 (50um and 25um Master)
                       : 09.02.2018 (25 um Slave) 

    Mythen3
    =======
    Compatible version : 10.09.2021 (v1.1)

    Gotthard2
    =========
    Compatible version : 27.05.2021 (v0.1)

    Moench
    ======
    Compatible version : 05.10.2020 (v1.0)

    Ctb
    ===
    Compatible version : 05.10.2020 (v1.0)

    Detector Upgrade
    ================
    The following can be upgraded remotely:
    Eiger      via bit files
    Jungfrau   via command <.pof>
    Mythen3    via command <.rbf>
    Gotthard2  via command <.rbf> 
    Moench     via command <.pof>
    Ctb        via command <.pof>

    The following cannot be upgraded remotely:
    Gotthard   

    Instructions available at
        https://slsdetectorgroup.github.io/devdoc/firmware.html
    and
        https://slsdetectorgroup.github.io/devdoc/serverupgrade.html



4. Kernel Requirements
======================

    Blackfin 
    ========
    Latest version: Fri Oct 29 00:00:00 2021
    
    Older ones will work, but might have issues with programming firmware via
    the package.

    Nios
    ====
    Compatible version: Mon May 10 18:00:21 CEST 2021

    Kernel Upgrade
    ==============
    Eiger   via bit files
    Others  via command

    Commands: udpatekernel, kernelversion
    Instructions available at
        https://slsdetectorgroup.github.io/devdoc/commandline.html
        https://slsdetectorgroup.github.io/devdoc/detector.html
        https://slsdetectorgroup.github.io/devdoc/pydetector.html



5. Download, Documentation & Support
====================================

    Download
    --------
    
    The Source Code:
         https://github.com/slsdetectorgroup/slsDetectorPackage
            
    Documentation
    -------------
    
    Installation:
        https://slsdetectorgroup.github.io/devdoc/installation.html#
        
    Firmware Upgrade:
        https://slsdetectorgroup.github.io/devdoc/firmware.html

    Detector Server upgrade:
        https://slsdetectorgroup.github.io/devdoc/serverupgrade.html

    Detector Simulators:
        https://slsdetectorgroup.github.io/devdoc/virtualserver.html

    Consuming slsDetectorPackage:
        https://slsdetectorgroup.github.io/devdoc/consuming.html
        
    API Examples:
        https://github.com/slsdetectorgroup/api-examples

    Command Line Documentation:
        https://slsdetectorgroup.github.io/devdoc/commandline.html

    Quick Start Guide:
        https://slsdetectorgroup.github.io/devdoc/quick_start_guide.html
        
    C++ API Documentation:
        https://slsdetectorgroup.github.io/devdoc/detector.html
       
    C++ API Example:
        https://slsdetectorgroup.github.io/devdoc/examples.html#
        
    Python API Documentation:
        https://slsdetectorgroup.github.io/devdoc/pygettingstarted.html

    Python API Example:
        https://slsdetectorgroup.github.io/devdoc/pyexamples.html

    Receivers (including custom receiver):
        https://slsdetectorgroup.github.io/devdoc/receivers.html
        https://slsdetectorgroup.github.io/devdoc/slsreceiver.html

    TroubleShooting:
        https://slsdetectorgroup.github.io/devdoc/troubleshooting.html
        
    Further Documentation:
        https://www.psi.ch/en/detectors/documentation
        
    Info on Releases:
        https://www.psi.ch/en/detectors/software


    Support
    -------

        dhanya.thattil@psi.ch
        erik.frojdh@psi.ch