SLS Detector Package 4.2.0 released on 10.03.2020 (Minor Release)
===================================================================


This document describes the differences between 4.2.0 and 4.1.1 releases.   
    
    CONTENTS
    --------
    1.  Topics Concerning
    2.  New Features
    3.  Resolved Issues
    4.  Firmware Requirements
    5.  Download, Documentation & Support
    


1. Topics Concerning
====================

    - (Eiger) Change in vcal dac value
    - (Eiger) Deactivate a module
    - (Eiger) Setting all trimbits argument check
    - (Receiver) rx_fifodepth has a higher range
    - (Receiver) subperiod in master file
    - (Receiver) performance (memory allocation and alignment, file buffering)
    - (Package) Removed warnings including memory overlap copy
    - (Users) Added setflippeddatax to users class

    Compared to 4.1.1, 
        - no firmware update required for this release
        - eiger on-board detector server update required for this release



2. New Features
===============

    Receiver
    --------
    1.  Memory in receiver is now byte aligned and write to every page
        at memory allocation to ensure complete memory allocated right
        from start. Removed file buffering when writing to file. Replaced
        pausing on keepRunning variable with semaphore to reduce cpu
        load.

    Client
    ------
    1.  Added setflippeddatax to users class.



3. Resolved Issues
==================          

    Detector Server (Eiger)
    -----------------------
    1.  Vcal dac set to 0 at on-board detector server start up to
        reduce noise.

    2.  Setting activate to 0 sent to both control and stop server.
        So, deactivate a module can be done even if FEB communication fails.
        Restarting the server will activate the module again.

    3.  Setting all trimbits values checked for values 0 - 63.

    Receiver
    --------
    1.  Earlier, setting rx_fifodepth to a high value would set to 
        a lower value, printing this low value to console, 
        but not giving an error. Memory allocated can now take in 64 bits.
    
    2.  Modifying subexptime now also updates subperiod in master file.
        Also, the print for subperiod name to console is corrected.

    Package
    -------
    1.  Many warnings have been fixed, including those with overlapping 
        memory copies for source and destination. 
    
    
    
4. Firmware Requirements
========================
        
        Gotthard
        ========   
        Minimum compatible version  : 11.01.2013
        Latest compatible version   : 08.02.2018 (50um and 25um Master)
                                      09.02.2018 (25 um Slave) 
        Eiger
        =====  
        Minimum compatible version  : 24
        Latest compatible version   : 24
        
        Jungfrau
        ========       
        Minimum compatible version  : 26.02.2018
        Latest compatible version   : 06.12.2018

        
        Detector Upgrade
        ================
        Gotthard    Cannot be upgraded remotely. Requires programming via USB blaster
        Eiger       Can be upgraded remotely via bit files
        Jungfrau    Can be upgraded remotely using sls_detector_put programfpga <pof>
        
        Instructions available at
        https://slsdetectorgroup.github.io/slsDetectorPackage/docs/html/slsDetectorInstall/GOTTHARD_Firmware.html
        https://slsdetectorgroup.github.io/slsDetectorPackage/docs/html/slsDetectorInstall/EIGER_Firmware.html
        https://slsdetectorgroup.github.io/slsDetectorPackage/docs/html/slsDetectorInstall/JUNGFRAU_Firmware.html

         
    Please refer to the link below for more details on the firmware versions.
    https://www.psi.ch/en/detectors/firmware
    
    
        
5. Download, Documentation & Support
====================================

    Download
    --------
    
    The Source Code (Default C++ API):
         https://github.com/slsdetectorgroup/slsDetectorPackage
         
    The Conda Lib Package:
        https://github.com/slsdetectorgroup/sls_detector_lib
        
    The Conda GUI Package:
        https://github.com/slsdetectorgroup/sls_detector_gui    
        
    The Python Interface (including the package):
        https://github.com/slsdetectorgroup/sls_detector
    
    
    Documentation
    -------------
    
    Manual (HTML & PDF):
        https://www.psi.ch/en/detectors/documentation
        slsDetectorPackage/manual/docs/
        
    Command Line Documentation:
        https://slsdetectorgroup.github.io/slsDetectorPackage/docs/html/slsDetectorClientDocs/index.html
        https://slsdetectorgroup.github.io/slsDetectorPackage/docs/pdf/slsDetectorClientDocs.pdf

        manual/docs/html/slsDetectorClientDocs/index.html
        manual/docs/pdf/slsDetectorClientDocs.pdf
        
    C++ API Documentation:
        https://slsdetectorgroup.github.io/slsDetectorPackage/docs/html/slsDetectorUsersDocs/index.html
        https://slsdetectorgroup.github.io/slsDetectorPackage/docs/pdf/slsDetectorUsersDocs.pdf

        manual/docs/html/slsDetectorUsersDocs/index.html
        manual/docs/pdf/slsDetectorUsersDocs.pdf
        
    C++ API Example:
        https://slsdetectorgroup.github.io/slsDetectorPackage/exampleCode/slsDetectorUsersExample/index.html

        manual/manual-api/mainClient.cpp
        manual/manual-api/mainReceiver.cpp
        
    Python API Documentation:
        https://slsdetectorgroup.github.io/sls_detector/

    TroubleShotting:
        https://www.psi.ch/en/detectors/troubleshooting
        
    Further Documentation:
        https://www.psi.ch/en/detectors/users-support
        
    
    Support
    -------

        dhanya.thattil@psi.ch
        erik.frojdh@psi.ch
        anna.bergamaschi@psi.ch