Commands to setup the settings of the detector
\begin{DoxyItemize}
\item \hyperlink{settings_settingsdir}{Settings, trim \& cal Directories}: commands to setup settings/trim/cal directories
\item \hyperlink{settings_settingssett}{Settings and Threshold}: commands to configure settings and threshold of detector
\item \hyperlink{settings_settingsdacs}{DACs}: commands to configure DACs of detector
\item \hyperlink{settings_settingsadcs}{ADCs}: commands to readout ADCs of detector
\end{DoxyItemize}\hypertarget{settings_settingsdir}{}\subsection{Settings, trim \& cal Directories}\label{settings_settingsdir}
commands to setup settings/trim/cal directories


\begin{DoxyItemize}
\item {\bfseries settingsdir \mbox{[}dir\mbox{]}} Sets/gets the directory where the settings files are located. {\ttfamily Returns} {\ttfamily }(string) dir
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries trimdir \mbox{[}dir\mbox{]}} obsolete {\ttfamily settingsdir}. {\ttfamily Returns} {\ttfamily }(string) dir
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries caldir \mbox{[}dir\mbox{]}} Sets/gets the directory where the calibration files are located. {\ttfamily Returns} {\ttfamily }(string) dir
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries trimen \mbox{[}n e0 e1...e(n-\/1)\mbox{]}} Sets/gets the number of energies n at which the detector has default trim file and their values in eV (int). {\ttfamily Returns} {\ttfamily }(int int...) n e0 e1...e(n-\/1)
\end{DoxyItemize}\hypertarget{settings_settingssett}{}\subsection{Settings and Threshold}\label{settings_settingssett}
commands to configure settings and threshold of detector


\begin{DoxyItemize}
\item {\bfseries settings \mbox{[}s\mbox{]}} sets/gets the settings of the detector. Options: {\ttfamily standard}, {\ttfamily fast}, {\ttfamily highgain}, {\ttfamily dynamicgain}, {\ttfamily lowgain}, {\ttfamily mediumgain}, {\ttfamily veryhighgain}, {\ttfamily lownoise}, {\ttfamily dynamichg0}, {\ttfamily fixgain1}, {\ttfamily fixgain2}, {\ttfamily forceswitchg1}, {\ttfamily forceswitchg2}. \par
 In Eiger, only sets in client shared memory. Use {\ttfamily threshold} or {\ttfamily thresholdnotb} to pass to detector. Gets from detector. {\ttfamily Returns} {\ttfamily }(string) s
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries threshold \mbox{[}eV\mbox{]} \mbox{[}sett\mbox{]} } sets/gets the detector threshold in eV. sett is optional and if provided also sets the settings. Use this for Eiger instead of {\ttfamily settings}. {\ttfamily Returns} {\ttfamily }(int)
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries thresholdnotb \mbox{[}eV\mbox{]} \mbox{[}sett\mbox{]} } sets/gets the detector threshold in eV without loading trimbits. sett is optional and if provided also sets the settings. Use this for Eiger instead of {\ttfamily settings}. {\ttfamily Returns} {\ttfamily }(int)
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries trimbits \mbox{[}fname\mbox{]} } loads/stores the trimbits to/from the detector. If no extension is specified, the serial number of each module will be attached. {\ttfamily Returns} {\ttfamily }(string) fname
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries trim:\mbox{[}mode\mbox{]} \mbox{[}fname\mbox{]}} trims the detector according to mode and saves resulting trimbits to file. Mode: noise, beam, improve, fix. Used in MYTHEN only. Only put! {\ttfamily Returns} {\ttfamily }(\char`\"{}done\char`\"{})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries trimval \mbox{[}i\mbox{]}} sets all trimbits to i. Used in EIGER only. {\ttfamily Returns} {\ttfamily }(int)
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries pedestal \mbox{[}i\mbox{]}} starts acquisition for i frames, calculates pedestal and writes back to fpga. Used in GOTTHARD only. Only put! {\ttfamily Returns} {\ttfamily }(int)
\end{DoxyItemize}\hypertarget{settings_settingsdacs}{}\subsection{DACs}\label{settings_settingsdacs}
commands to configure DACs of detector


\begin{DoxyItemize}
\item {\bfseries vthreshold \mbox{[}i\mbox{]} \mbox{[}mv\mbox{]}} Sets/gets detector threshold voltage for single photon counters. Normally in DAC units unless {\ttfamily mv} is specified at the end of the command line. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vcalibration \mbox{[}i\mbox{]} \mbox{[}mv\mbox{]}} Sets/gets the voltage of the calibration pulses. Normally in DAC units unless {\ttfamily mv} is specified at the end of the command line. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vtrimbit \mbox{[}i\mbox{]} \mbox{[}mv\mbox{]}} Sets/gets the voltage to set the width of the trimbits. Normally in DAC units unless {\ttfamily mv} is specified at the end of the command line. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vpreamp \mbox{[}i\mbox{]} \mbox{[}mv\mbox{]}} Sets/gets the voltage to define the preamplifier feedback resistance. Normally in DAC units unless {\ttfamily mv} is specified at the end of the command line. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vhaper1 \mbox{[}i\mbox{]} \mbox{[}mv\mbox{]}} Sets/gets the voltage to define the feedback resistance of the first shaper. Normally in DAC units unless {\ttfamily mv} is specified at the end of the command line. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vshaper2 \mbox{[}i\mbox{]} \mbox{[}mv\mbox{]}} Sets/gets the voltage to define the feedback resistance of the second shaper. Normally in DAC units unless {\ttfamily mv} is specified at the end of the command line. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vhighvoltage \mbox{[}i\mbox{]}} Sets/gets the high voltage to the sensor in V. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]}).
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vapower \mbox{[}i\mbox{]}} Sets/gets the analog power supply for the old chiptest board in DAC units. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vddpower \mbox{[}i\mbox{]}} Sets/gets the digital power supply for the old chiptest board in DAC units. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vshpower \mbox{[}i\mbox{]}} Sets/gets the comparator power supply for the old chiptest board in DAC units. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries viopower \mbox{[}i\mbox{]}} Sets/gets the power supply of the FPGA I/Os for the old chiptest board in DAC units. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vrefds \mbox{[}i\mbox{]} \mbox{[}mv\mbox{]}} Sets/gets vrefds. Normally in DAC units unless {\ttfamily mv} is specified at the end of the command line. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vcascn\_\-pb \mbox{[}i\mbox{]} \mbox{[}mv\mbox{]}} Sets/gets vcascn\_\-pb. Normally in DAC units unless {\ttfamily mv} is specified at the end of the command line. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vcasc\_\-pb \mbox{[}i\mbox{]} \mbox{[}mv\mbox{]}} Sets/gets vcasc\_\-pb. Normally in DAC units unless {\ttfamily mv} is specified at the end of the command line. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vout\_\-cm \mbox{[}i\mbox{]} \mbox{[}mv\mbox{]}} Sets/gets vout\_\-cm. Normally in DAC units unless {\ttfamily mv} is specified at the end of the command line. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vcasc\_\-out \mbox{[}i\mbox{]} \mbox{[}mv\mbox{]}} Sets/gets vcasc\_\-out. Normally in DAC units unless {\ttfamily mv} is specified at the end of the command line. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vin\_\-com \mbox{[}i\mbox{]} \mbox{[}mv\mbox{]}} Sets/gets vin\_\-com. Normally in DAC units unless {\ttfamily mv} is specified at the end of the command line. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vref\_\-comp \mbox{[}i\mbox{]} \mbox{[}mv\mbox{]}} Sets/gets vref\_\-comp. Normally in DAC units unless {\ttfamily mv} is specified at the end of the command line. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries ib\_\-test\_\-c \mbox{[}i\mbox{]} \mbox{[}mv\mbox{]}} Sets/gets ib\_\-test\_\-c. Normally in DAC units unless {\ttfamily mv} is specified at the end of the command line. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries dac\mbox{[}0..7\mbox{]} \mbox{[}i\mbox{]} \mbox{[}mv\mbox{]}} Sets/gets dac\mbox{[}0..7\mbox{]} for MOENCH02. Normally in DAC units unless {\ttfamily mv} is specified at the end of the command line. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vsvp \mbox{[}i\mbox{]} \mbox{[}mv\mbox{]}} Sets/gets vsvp. Normally in DAC units unless {\ttfamily mv} is specified at the end of the command line. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vsvn \mbox{[}i\mbox{]} \mbox{[}mv\mbox{]}} Sets/gets vsvn. Normally in DAC units unless {\ttfamily mv} is specified at the end of the command line. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vtr \mbox{[}i\mbox{]} \mbox{[}mv\mbox{]}} Sets/gets vtr. Normally in DAC units unless {\ttfamily mv} is specified at the end of the command line. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vrf \mbox{[}i\mbox{]} \mbox{[}mv\mbox{]}} Sets/gets vrf. Normally in DAC units unless {\ttfamily mv} is specified at the end of the command line. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vrs \mbox{[}i\mbox{]} \mbox{[}mv\mbox{]}} Sets/gets vrs. Normally in DAC units unless {\ttfamily mv} is specified at the end of the command line. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vtgstv \mbox{[}i\mbox{]} \mbox{[}mv\mbox{]}} Sets/gets vtgstv. Normally in DAC units unless {\ttfamily mv} is specified at the end of the command line. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vcmp\_\-ll \mbox{[}i\mbox{]} \mbox{[}mv\mbox{]}} Sets/gets vcmp\_\-ll. Normally in DAC units unless {\ttfamily mv} is specified at the end of the command line. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vcmp\_\-lr \mbox{[}i\mbox{]} \mbox{[}mv\mbox{]}} Sets/gets vcmp\_\-lr. Normally in DAC units unless {\ttfamily mv} is specified at the end of the command line. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vcal\_\-l \mbox{[}i\mbox{]} \mbox{[}mv\mbox{]}} Sets/gets vcal\_\-l. Normally in DAC units unless {\ttfamily mv} is specified at the end of the command line. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vcomp\_\-rl \mbox{[}i\mbox{]} \mbox{[}mv\mbox{]}} Sets/gets vcomp\_\-rl. Normally in DAC units unless {\ttfamily mv} is specified at the end of the command line. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vcomp\_\-rr \mbox{[}i\mbox{]} \mbox{[}mv\mbox{]}} Sets/gets vcomp\_\-rr. Normally in DAC units unless {\ttfamily mv} is specified at the end of the command line. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries rxb\_\-rb \mbox{[}i\mbox{]} \mbox{[}mv\mbox{]}} Sets/gets rxb\_\-rb. Normally in DAC units unless {\ttfamily mv} is specified at the end of the command line. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries rxb\_\-lb \mbox{[}i\mbox{]} \mbox{[}mv\mbox{]}} Sets/gets rxb\_\-lb. Normally in DAC units unless {\ttfamily mv} is specified at the end of the command line. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vcp \mbox{[}i\mbox{]} \mbox{[}mv\mbox{]}} Sets/gets vcp. Normally in DAC units unless {\ttfamily mv} is specified at the end of the command line. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vcn \mbox{[}i\mbox{]} \mbox{[}mv\mbox{]}} Sets/gets vcn. Normally in DAC units unless {\ttfamily mv} is specified at the end of the command line. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vis \mbox{[}i\mbox{]} \mbox{[}mv\mbox{]}} Sets/gets vis. Normally in DAC units unless {\ttfamily mv} is specified at the end of the command line. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries iodelay \mbox{[}i\mbox{]} \mbox{[}mv\mbox{]}} Sets/gets iodelay. Normally in DAC units unless {\ttfamily mv} is specified at the end of the command line. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries dac:j \mbox{[}i\mbox{]} \mbox{[}mv\mbox{]}} Sets/gets value for DAC number j for the new chiptestboard. Normally in DAC units unless {\ttfamily mv} is specified at the end of the command line. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries adcvpp \mbox{[}i\mbox{]} } Sets/gets the Vpp of the ADC 0 -\/$>$ 1V ; 1 -\/$>$ 1.14V ; 2 -\/$>$ 1.33V ; 3 -\/$>$ 1.6V ; 4 -\/$>$ 2V . {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries v\_\-a \mbox{[}i\mbox{]} mv} Sets/gets value for Va on the new chiptest board. Must be in mV. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries v\_\-b \mbox{[}i\mbox{]} mv} Sets/gets value for Vb on the new chiptest board. Must be in mV. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries v\_\-c \mbox{[}i\mbox{]} mv} Sets/gets value for Vc on the new chiptest board. Must be in mV. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries v\_\-d \mbox{[}i\mbox{]} mv} Sets/gets value for Vd on the new chiptest board. Must be in mV. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries v\_\-io \mbox{[}i\mbox{]} mv} Sets/gets value for Vio on the new chiptest board. Must be in mV. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries v\_\-chip \mbox{[}i\mbox{]} mv} Sets/gets value for Vchip on the new chiptest board. Must be in mV. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]}). Normally don't use it!
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries v\_\-limit \mbox{[}i\mbox{]} mv} Sets/gets a soft limit for the power supplies and the DACs on the new chiptest board. Must be in mV. {\ttfamily Returns} {\ttfamily }(int \mbox{[}\char`\"{}mV\char`\"{}\mbox{]})
\end{DoxyItemize}\hypertarget{settings_settingsadcs}{}\subsection{ADCs}\label{settings_settingsadcs}
commands to readout ADCs of detector


\begin{DoxyItemize}
\item {\bfseries temp\_\-adc} Gets the ADC temperature. {\ttfamily Returns} {\ttfamily EIGER},JUNGFRAU(double\char`\"{}°C\char`\"{}) Others {\ttfamily }(int\char`\"{}°C\char`\"{})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries temp\_\-fpga} Gets the FPGA temperature. {\ttfamily Returns} {\ttfamily EIGER},JUNGFRAU(double\char`\"{}°C\char`\"{}) Others {\ttfamily }(int\char`\"{}°C\char`\"{})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries temp\_\-fpgaext} Gets the external FPGA temperature. Used in EIGER only. {\ttfamily Returns} {\ttfamily EIGER}(double\char`\"{}°C\char`\"{})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries temp\_\-10ge} Gets the 10Gbe temperature. Used in EIGER only. {\ttfamily Returns} {\ttfamily EIGER}(double\char`\"{}°C\char`\"{})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries temp\_\-dcdc} Gets the temperature of the DC/DC converter. Used in EIGER only. {\ttfamily Returns} {\ttfamily EIGER}(double\char`\"{}°C\char`\"{})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries temp\_\-sodl} Gets the temperature of the left so-\/dimm memory . Used in EIGER only. {\ttfamily Returns} {\ttfamily EIGER}(double\char`\"{}°C\char`\"{})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries temp\_\-sodr} Gets the temperature of the right so-\/dimm memory. Used in EIGER only. {\ttfamily Returns} {\ttfamily EIGER}(double\char`\"{}°C\char`\"{})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries adc:j} Gets the values of the slow ADC number j for the new chiptest board. {\ttfamily Returns} {\ttfamily }(int\char`\"{}°C\char`\"{})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries temp\_\-fpgal} Gets the temperature of the left frontend FPGA. Used in EIGER only. {\ttfamily Returns} {\ttfamily EIGER}(double\char`\"{}°C\char`\"{})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries temp\_\-fpgar} Gets the temperature of the right frontend FPGA. Used in EIGER only. {\ttfamily Returns} {\ttfamily EIGER}(double\char`\"{}°C\char`\"{})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries i\_\-a} Gets the current of the power supply a on the new chiptest board. {\ttfamily Returns} {\ttfamily }(int\char`\"{}mV\char`\"{})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries i\_\-b} Gets the current of the power supply b on the new chiptest board {\ttfamily Returns} {\ttfamily }(int\char`\"{}mV\char`\"{})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries i\_\-c} Gets the current of the power supply c on the new chiptest board {\ttfamily Returns} {\ttfamily }(int\char`\"{}mV\char`\"{})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries i\_\-d} Gets the current of the power supply d on the new chiptest board {\ttfamily Returns} {\ttfamily }(int\char`\"{}mV\char`\"{})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries i\_\-io} Gets the current of the power supply io on the new chiptest board {\ttfamily Returns} {\ttfamily }(int\char`\"{}mV\char`\"{})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vm\_\-a} Gets the measured voltage of the power supply a on the new chiptest board {\ttfamily Returns} {\ttfamily }(int\char`\"{}mV\char`\"{})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vm\_\-b} Gets the measured voltage of the power supply b on the new chiptest board {\ttfamily Returns} {\ttfamily }(int\char`\"{}mV\char`\"{})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vm\_\-c} Gets the measured voltage of the power supply c on the new chiptest board {\ttfamily Returns} {\ttfamily }(int\char`\"{}mV\char`\"{})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vm\_\-d} Gets the measured voltage of the power supply d on the new chiptest board {\ttfamily Returns} {\ttfamily }(int\char`\"{}mV\char`\"{})
\end{DoxyItemize}


\begin{DoxyItemize}
\item {\bfseries vm\_\-io} Gets the measured voltage of the power supply io on the new chiptest board {\ttfamily Returns} {\ttfamily }(int\char`\"{}mV\char`\"{}) 
\end{DoxyItemize}