Developer

Commands to be used only for software debugging. Avoid using them!

• test returns an error

• help Returns a list of possible commands.

• exitserver Shuts down all the detector servers. Don't use it!!!!

• exitreceiver Shuts down all the receivers. Don't use it!!!!

• flippeddatay [i] enables/disables data being flipped across y axis. 1 enables, 0 disables. Not implemented.

• digitest [i] will perform test which will plot the unique channel identifier, instead of data. Only get!

• bustest performs test of the bus interface between FPGA and embedded Linux system. Can last up to a few minutes. Cannot set! Used for Mythen only. Only get!

• digibittest:[i] performs digital test of the module i. Returns 0 if succeeded, otherwise error mask. Only put!

• reg [addr] [val] ??? writes to an register addr with value in hexadecimal format.

• adcreg [addr] [val] ??? writes to an adc register addr with value in hexadecimal format. Only put!

• setbit ??? Only put!

• clearbit ??? Only put!

• getbit ??? Only get!

• r_compression [i] sets/gets compression in receiver. 1 sets, 0 unsets. Not implemented.