fill value in hdf5 according to actual datatype of dataset

* m3: clk 0 changed from 10 to 20 (100MHz to 50MHz)

* g2: startup clk div back to 10 as in firmware but setting in software startup to 20

CMakeLists.txt

@@ -2,7 +2,7 @@
 # Copyright (C) 2021 Contributors to the SLS Detector Package
 cmake_minimum_required(VERSION 3.14)
 project(slsDetectorPackage)
-set(PROJECT_VERSION 8.0.2)
+set(PROJECT_VERSION 8.0.1)
 
 set(CMAKE_CXX_FLAGS_RELEASE "-O3 -DNDEBUG")
 

RELEASE.txt

@@ -1,7 +1,7 @@
-SLS Detector Package Bug Fix Release 8.0.2 released on 18.09.2024
-=================================================================
+SLS Detector Package Major Release 8.0.1 released on 16.01.2024
+===============================================================
 
-This document describes the differences between v8.0.2 and v8.0.1
+This document describes the differences between v8.0.1 and v8.0.0
 
 
 
@@ -24,101 +24,20 @@ This document describes the differences between v8.0.2 and v8.0.1
     -----------
 
 
-    *   Rapidjson compilation with gcc 14
-        Fixed a compile issue with gcc 14. Same fix in later commits to rapidjson.
+    *   Fixed compilation error when building without zmq-devel installed
+        and removed dependency on zeromq in conda build. 
 
 
-    Client
-    ------
+    *   Fixed libzmq compilation error to build the package as a submodule.
 
 
-    *   getenv("HOME") returning nullptr
-        When this happens, especially for systemd, it segfaults. Protection 
-        provided by using empty string in this case.
+    Calibration
+    -----------
 
 
-    *   [Mythen3] Bad channel list for multi module
-        Exception thrown when loading multi module bad channel file skipping 
-        modules in between. Fixed.
+    *   [Moench] Fixed Moench calibration
 
 
-    *   [Gotthard2] Stopping a blocking acquisition
-        A check added in v8.0.0 to catch slaves that might be in waiting forever
-        also catches Gotthard2 25um slaves that might only be in waiting 
-        temporarily. This is fixed with a 50ms sleep before checking again 
-        (upto 1s). 
-
-
-    *   [Moench] Acquire finished processing call back
-        New executable 'sls_detector_acquire_zmq' added to listen to all zmq 
-        packets from post processor or external process to signal end of post 
-        processing. Post processor refactoring of zmq socket creation added.
-
-
-    Gui / Callback
-    --------------
-
-
-    *   [Gotthard2] Stopping a blocking acquisition
-        From the previous issue, call back for acquisition finished status gives 
-        error for inconsistent states. Again, a check every 50ms upto 1s is 
-        added to let go the temporarily waiting slave.
-
-
-    *   Different file paths
-        Fixes file path resetting when different modules have different fpath set.
-
-
-    Receiver
-    --------
-
-
-    *   HDF5 fill value
-        Fix the fill value to accomodate all datatypes.
-
-   
-    Firmware
-    --------
-
-
-    *   [Moench] Overflow with exptime of 0
-        Fixed overflow when subtracting 1 clock cycle from exptime.
-
-
-    On-board Detector Server
-    ------------------------
-
-
-    *   [Moench] Few changes in Server:
-        - Max shifts of adc clock changed from 240 to 200. 
-
-        - Fixed overflow when subtracting 2 clock cycles from exptime of 0ms.
-
-        - Default readout speed to half speed from quarter.
-
-        - Change default ADC phase to 150 for full readout speed.
-
-        - Change default vipre_cds dac from 800 to 1280.
-
-
-    *   [Mythen3] Change Clk divider from 10 (100MHz) to 20 (50MHz) at startup.
-
-
-    *   [Jungfrau] Fix for HW v1.0 boards for unreliable ADC 2
-        Issues sometimes seen on some HW v 1.0 boards are fixed with phase 
-        relationship of 120 degrees. HW v2.0 boards are not affected.
-        
-
-    Documentation
-    -------------
-
-
-    *   Updated troubleshooting documentaion to check links and disable firewall
-
-
-    *   Excluded non UTF-8 encoded libzmq documents due to machine dependent 
-        compilation issues.
-
 
 
 2  On-board Detector Server Compatibility
@@ -126,11 +45,11 @@ This document describes the differences between v8.0.2 and v8.0.1
 
 
     Eiger       8.0.0
-    Jungfrau    8.0.2
-    Mythen3     8.0.2
+    Jungfrau    8.0.0
+    Mythen3     8.0.0
     Gotthard2   8.0.0
     Gotthard    8.0.0
-    Moench      8.0.2
+    Moench      8.0.0
     Ctb         8.0.0
     
 
@@ -139,6 +58,8 @@ This document describes the differences between v8.0.2 and v8.0.1
 
     From v6.1.0 (without tftp):
         Using command 'updatedetectorserver'
+    From 5.0.0 (with tftp):
+        Using command 'copydetectorserver'
 
     Instructions available at
         https://slsdetectorgroup.github.io/devdoc/serverupgrade.html
@@ -162,8 +83,7 @@ This document describes the differences between v8.0.2 and v8.0.1
     Gotthard    08.02.2018 (50um and 25um Master)
                 09.02.2018 (25 um Slave) 
 
-    Moench      26.10.2023 (v0.3.2)                 (updated in 8.0.2, 
-                                                    under development)
+    Moench      10.07.2023 (v0.3.2)                 (updated in 8.0.0, under development)
 
     Ctb         28.08.2023 (v1.2)                   (updated in 8.0.0)
 
@@ -184,10 +104,10 @@ This document describes the differences between v8.0.2 and v8.0.1
 
     Except Eiger, 
         upgrade 
-            using command 'programfpga' or
+            Using command 'programfpga' or
 
         udpate both server and firmware simultaneously
-            using command 'update'
+            Using command 'update'
 
 
     Instructions available at

docs/Doxyfile.in

@@ -890,7 +890,7 @@ EXCLUDE_SYMLINKS       = NO
 # Note that the wildcards are matched against the file with absolute path, so to
 # exclude all test directories for example use the pattern */test/*
 
-EXCLUDE_PATTERNS       = */docs/* */tests/* */python/* */manual */slsDetectorServers/* */libs/* */integrationTests *README* */slsDetectorGui/* */ctbGui/* */slsDetectorCalibration/* *TobiSchluter*
+EXCLUDE_PATTERNS       = */docs/* */tests/* */python/* */manual */slsDetectorServers/* */libs/* */integrationTests *README* */slsDetectorGui/* */ctbGui/* */slsDetectorCalibration/*
 
 # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
 # (namespaces, classes, functions, etc.) that should be excluded from the

docs/src/troubleshooting.rst

@@ -22,8 +22,6 @@ Common
        * Check transeiver and fibers are compatible (all MMF 850nm or all SMF 1030nm)
        * Check fiber
        * Check fiber polarity (if short range, unplug the link anywhere, and look at the light/dark pattern: dark has to mate with light)
-    * For Jungfrau, check if the blue sfp light is blinking rapidly (even when it is not sending data). If so, most likely the link is down and something is wrong with the board. If it connected to a switch, then you do not see it with the ethtool command if link is down. One option is to connect it directly to a pc to see if link is down.
-    * With nc, try "nc -u -p 50001 -l" in receiving pc, and from another pc try "echo hallo | nc -u 10.1.2.172 50001" to send something to the recieving pc interface to see if the link is up and see if the other nc console receives the hallo.
 
 #. Detector is not acquiring (Not Eiger)
     * Take an acquisition with many images and using the following steps instead of acquire:
@@ -49,20 +47,11 @@ Common
     * Ensure that the interfaces (on NIC and the switch) used in receiver pc have MTU 9000 (jumbo frames) enabled.
 
 
-#. Check if 'rx packets' counter in 'ifconfig' do not increment for interface.
+#. Check if 'rx_frames' counter in 'ifconfig' do not increment for interface.
     * If no, check switch configuration if present. Port counters of switch can also help to identify problem.
     * If yes, but receiver software does not see it:
 
         * Check no firewall (eg. firewalld) is present or add rules
-
-                .. code-block:: bash
-                    
-                    # Stop and disable firewall
-                    service firewalld stop
-                    systemctl disable firewalld
-                    # Check status
-                    service firewalld status
-
         * Check that selinux is disabled ( or add rules)
         
 #. Source UDP IP in config file (Not Eiger)

serverBin/jungfrauDetectorServerv8.0.0

@@ -0,0 +1 @@
+../slsDetectorServers/jungfrauDetectorServer/bin/jungfrauDetectorServerv8.0.0

serverBin/jungfrauDetectorServerv8.0.2

@@ -1 +0,0 @@
-../slsDetectorServers/jungfrauDetectorServer/bin/jungfrauDetectorServerv8.0.2

slsDetectorCalibration/moenchExecutables/moenchZmqProcess.cpp

@@ -183,8 +183,8 @@ int main(int argc, char *argv[]) {
     gainfname = args["gainfile"];
     etafname = args["etafilefile"];
     
-    if (atoi(args["numinterfaces"].c_str())>1){
-      cprintf(RED, "Sorry, at the  moment only a single interface is supported instead of %d\n",atoi(args["numinterfaces"].c_str()));
+    if (atoi(args["nuninterfaces"].c_str())>1){
+      cprintf(RED, "Sorry, at the  moment only a single interface is supported instead of %d\n",atoi(args["nuninterfaces"].c_str()));
       return EXIT_FAILURE;
     }
 
@@ -272,35 +272,54 @@ int main(int argc, char *argv[]) {
 
     sls::ZmqSocket *zmqsocket = NULL;
 
+#ifdef NEWZMQ
     // receive socket
     try {
+#endif
+
       zmqsocket = new sls::ZmqSocket(socketip.c_str(), portnum);
+
+#ifdef NEWZMQ
     } catch (...) {
         cprintf(RED,
-                "Error: Could not create Zmq receiving socket on port %d with ip %s\n",
+                "Error: Could not create Zmq socket on port %d with ip %s\n",
                 portnum, socketip.c_str());
         delete zmqsocket;
         return EXIT_FAILURE;
     }
+#endif
+
+#ifndef NEWZMQ
+    if (zmqsocket->IsError()) {
+        cprintf(RED,
+                "Error: Could not create Zmq socket on port %d with ip %s\n",
+                portnum, socketip.c_str());
+        delete zmqsocket;
+        return EXIT_FAILURE;
+    }
+#endif
     if (zmqsocket->Connect()) {
-        cprintf(RED, "Error: Could not connect to zmq receiving socket  %s\n",
+        cprintf(RED, "Error: Could not connect to socket  %s\n",
                 (zmqsocket->GetZmqServerAddress()).c_str());
         delete zmqsocket;
         return EXIT_FAILURE;
     } else
-    
-    printf("Zmq receiving at %s\n", zmqsocket->GetZmqServerAddress().c_str());
+        printf("Zmq Client at %s\n", zmqsocket->GetZmqServerAddress().c_str());
 
     // send socket
     sls::ZmqSocket *zmqsocket2 = 0;
     // cout << "zmq2 " << endl;
     if (send) {
+#ifdef NEWZMQ
         // receive socket
         try {
-    	  zmqsocket2 = new sls::ZmqSocket(portnum2, socketip2.c_str());
+#endif
+	  zmqsocket2 = new sls::ZmqSocket(portnum2, socketip2.c_str());
+
+#ifdef NEWZMQ
         } catch (...) {
             cprintf(RED,
-                    "Error: Could not create Zmq sending socket on port %d and "
+                    "Error: Could not create Zmq socket server on port %d and "
                     "ip %s\n",
                     portnum2, socketip2.c_str());
             //	delete zmqsocket2;
@@ -309,7 +328,28 @@ int main(int argc, char *argv[]) {
             //	return EXIT_FAILURE;
             send = false;
         }
-            printf("Zmq sending socket at %s\n",
+#endif
+
+#ifndef NEWZMQ
+        if (zmqsocket2->IsError()) {
+            cprintf(RED,
+                    "AAA Error: Could not create Zmq socket server on port %d "
+                    "and ip %s\n",
+                    portnum2, socketip2.c_str());
+            //	delete zmqsocket2;
+            // delete zmqsocket;
+            //	return EXIT_FAILURE;
+            send = false;
+        }
+#endif
+        if (zmqsocket2->Connect()) {
+            cprintf(RED, "BBB Error: Could not connect to socket  %s\n",
+                    zmqsocket2->GetZmqServerAddress().c_str());
+            //	delete zmqsocket2;
+            send = false;
+            //	return EXIT_FAILURE;
+        } else
+            printf("Zmq Client at %s\n",
                    zmqsocket2->GetZmqServerAddress().c_str());
     }
 

slsDetectorGui/src/qTabMeasurement.cpp

@@ -839,8 +839,8 @@ void qTabMeasurement::UpdateProgress() {
 int qTabMeasurement::VerifyOutputDirectoryError() {
     try {
         auto retval = det->getFilePath();
-        for (int i = 0; i < static_cast<int>(retval.size()); ++i) {
-            det->setFilePath(retval[i], {i});
+        for (auto &it : retval) {
+            det->setFilePath(it);
         }
         return slsDetectorDefs::OK;
     }

slsDetectorServers/jungfrauDetectorServer/slsDetectorFunctionList.c

@@ -488,7 +488,6 @@ void setupDetector() {
     AD9257_SetDefines(ADC_SPI_REG, ADC_SPI_SRL_CS_OTPT_MSK,
                       ADC_SPI_SRL_CLK_OTPT_MSK, ADC_SPI_SRL_DT_OTPT_MSK,
                       ADC_SPI_SRL_DT_OTPT_OFST);
-    AD9257_Set_Jungfrau_Hardware_Version_1_0(isHardwareVersion_1_0());
     AD9257_Disable();
     AD9257_Configure();
 

slsDetectorServers/slsDetectorServer/include/AD9257.h

@@ -4,10 +4,6 @@
 
 #include <inttypes.h>
 
-#ifdef JUNGFRAUD
-void AD9257_Set_Jungfrau_Hardware_Version_1_0(int val);
-#endif
-
 /**
  * Set Defines
  * @param reg spi register

slsDetectorServers/slsDetectorServer/src/AD9257.c

@@ -172,14 +172,6 @@ uint32_t AD9257_DigMask = 0x0;
 int AD9257_DigOffset = 0x0;
 int AD9257_VrefVoltage = 0;
 
-#ifdef JUNGFRAUD
-int AD9257_is_Jungfrau_Hardware_Version_1_0 = 0;
-
-void AD9257_Set_Jungfrau_Hardware_Version_1_0(int val) {
-    AD9257_is_Jungfrau_Hardware_Version_1_0 = val;
-}
-#endif
-
 void AD9257_SetDefines(uint32_t reg, uint32_t cmsk, uint32_t clkmsk,
                        uint32_t dmsk, int dofst) {
     AD9257_Reg = reg;
@@ -294,18 +286,8 @@ void AD9257_Configure() {
                AD9257_OUT_BINARY_OFST_VAL | AD9257_OUT_LVDS_IEEE_VAL);
 
     // output clock phase
-#ifdef JUNGFRAUD
-    if (AD9257_is_Jungfrau_Hardware_Version_1_0) {
-        LOG(logINFO, ("\tOutput clock phase: 120\n"));
-        AD9257_Set(AD9257_OUT_PHASE_REG, AD9257_OUT_CLK_120_VAL);
-    } else {
-        LOG(logINFO, ("\tOutput clock phase: 180\n"));
-        AD9257_Set(AD9257_OUT_PHASE_REG, AD9257_OUT_CLK_180_VAL);
-    }
-#else
     LOG(logINFO, ("\tOutput clock phase: 180\n"));
     AD9257_Set(AD9257_OUT_PHASE_REG, AD9257_OUT_CLK_180_VAL);
-#endif
 
     // all devices on chip to receive next command
     LOG(logINFO, ("\tAll devices on chip to receive next command\n"));

slsDetectorSoftware/CMakeLists.txt

@@ -80,9 +80,8 @@ if(SLS_USE_TEXTCLIENT)
     set(bin_names "sls_detector_put" 
             "sls_detector_get" 
             "sls_detector_acquire" 
-            "sls_detector_acquire_zmq" 
             "sls_detector_help")
-    set(cmd_name "PUT" "GET" "READOUT" "READOUTZMQ" "HELP")
+    set(cmd_name "PUT" "GET" "READOUT" "HELP")
     list(LENGTH bin_names len1)
     math(EXPR len2 "${len1} - 1")
 

slsDetectorSoftware/src/CmdLineApp.cpp

@@ -30,10 +30,6 @@ int main(int argc, char *argv[]) {
     int action = slsDetectorDefs::READOUT_ACTION;
 #endif
 
-#ifdef READOUTZMQ
-    int action = slsDetectorDefs::READOUT_ZMQ_ACTION;
-#endif
-
 #ifdef HELP
     int action = slsDetectorDefs::HELP_ACTION;
 #endif
@@ -50,8 +46,7 @@ int main(int argc, char *argv[]) {
     parser.Parse(argc, argv);
 
     // If we called sls_detector_acquire, add the acquire command
-    if (action == slsDetectorDefs::READOUT_ACTION ||
-        action == slsDetectorDefs::READOUT_ZMQ_ACTION)
+    if (action == slsDetectorDefs::READOUT_ACTION)
         parser.setCommand("acquire");
 
     if (parser.isHelp())

slsDetectorSoftware/src/CmdProxy.cpp

@@ -205,11 +205,6 @@ std::string CmdProxy::VirtualServer(int action) {
     return os.str();
 }
 
-void CmdProxy::EmptyDataCallBack(detectorData *data, uint64_t frameIndex,
-                                 uint32_t subFrameIndex, void *this_pointer) {
-    LOG(logDEBUG) << "EmptyDataCallBack to start up zmq sockets";
-}
-
 std::string CmdProxy::Acquire(int action) {
     std::ostringstream os;
     if (action == defs::HELP_ACTION) {
@@ -231,9 +226,6 @@ std::string CmdProxy::Acquire(int action) {
             throw RuntimeError("Individual detectors not allowed for readout.");
         }
 
-        if (action == defs::READOUT_ZMQ_ACTION) {
-            det->registerDataCallback(&(EmptyDataCallBack), this);
-        }
         det->acquire();
 
         if (det->getUseReceiverFlag().squash(false)) {

slsDetectorSoftware/src/CmdProxy.h

@@ -1350,8 +1350,6 @@ class CmdProxy {
     std::string GapPixels(int action);
     std::string BadChannels(int action);
     /* acquisition parameters */
-    static void EmptyDataCallBack(detectorData *data, uint64_t frameIndex,
-                                  uint32_t subFrameIndex, void *this_pointer);
     std::string Acquire(int action);
     std::string Exptime(int action);
     std::string ReadoutSpeed(int action);

slsDetectorSoftware/src/DetectorImpl.cpp

@@ -742,9 +742,8 @@ void DetectorImpl::readFrameFromReceiver() {
             }
         }
 
-        LOG(logDEBUG) << "Call Back Info:"
-                      << "\n\t nDetPixelsX: " << nDetPixelsX
-                      << "\n\t nDetPixelsY: " << nDetPixelsY
+        LOG(logDEBUG) << "Call Back Info:" << "\n\t nDetPixelsX: "
+                      << nDetPixelsX << "\n\t nDetPixelsY: " << nDetPixelsY
                       << "\n\t databytes: " << multisize
                       << "\n\t dynamicRange: " << dynamicRange;
 
@@ -762,8 +761,8 @@ void DetectorImpl::readFrameFromReceiver() {
                 callbackImage = multigappixels;
                 imagesize = n;
             }
-            LOG(logDEBUG) << "Image Info:"
-                          << "\n\tnDetActualPixelsX: " << nDetActualPixelsX
+            LOG(logDEBUG) << "Image Info:" << "\n\tnDetActualPixelsX: "
+                          << nDetActualPixelsX
                           << "\n\tnDetActualPixelsY: " << nDetActualPixelsY
                           << "\n\timagesize: " << imagesize
                           << "\n\tdynamicRange: " << dynamicRange;
@@ -798,8 +797,7 @@ void DetectorImpl::readFrameFromReceiver() {
 int DetectorImpl::insertGapPixels(char *image, char *&gpImage, bool quadEnable,
                                   int dr, int &nPixelsx, int &nPixelsy) {
 
-    LOG(logDEBUG) << "Insert Gap pixels:"
-                  << "\n\t nPixelsx: " << nPixelsx
+    LOG(logDEBUG) << "Insert Gap pixels:" << "\n\t nPixelsx: " << nPixelsx
                   << "\n\t nPixelsy: " << nPixelsy
                   << "\n\t quadEnable: " << quadEnable << "\n\t dr: " << dr;
 
@@ -884,12 +882,10 @@ int DetectorImpl::insertGapPixels(char *image, char *&gpImage, bool quadEnable,
                   << "nMod1Pixelsy: " << nMod1Pixelsy << "\n\t"
                   << "nMod1GapPixelsx: " << nMod1GapPixelsx << "\n\t"
                   << "nMod1GapPixelsy: " << nMod1GapPixelsy << "\n\t"
-                  << "nChipy: " << nChipy << "\n\t"
-                  << "nChipx: " << nChipx << "\n\t"
-                  << "nModx: " << nModx << "\n\t"
-                  << "nMody: " << nMody << "\n\t"
-                  << "nTotx: " << nTotx << "\n\t"
-                  << "nToty: " << nToty << "\n\t"
+                  << "nChipy: " << nChipy << "\n\t" << "nChipx: " << nChipx
+                  << "\n\t" << "nModx: " << nModx << "\n\t"
+                  << "nMody: " << nMody << "\n\t" << "nTotx: " << nTotx
+                  << "\n\t" << "nToty: " << nToty << "\n\t"
                   << "bytesPerPixel: " << bytesPerPixel << "\n\t"
                   << "imagesize: " << imagesize << "\n\t"
                   << "nChipBytesx: " << nChipBytesx << "\n\t"
@@ -1221,14 +1217,10 @@ int DetectorImpl::acquire() {
 
         if (acquisition_finished != nullptr) {
             // status
+            runStatus status = IDLE;
             auto statusList = Parallel(&Module::getRunStatus, {});
-            // if any slave still waiting, wait up to 1s (gotthard)
-            for (int i = 0; i != 20 && statusList.any(WAITING); ++i) {
-                std::this_thread::sleep_for(std::chrono::milliseconds(50));
-                statusList = Parallel(&Module::getRunStatus, {});
-            }
-            runStatus status = statusList.squash(ERROR);
-            // inconsistent status (squash error), but none of them in error
+            status = statusList.squash(ERROR);
+            // difference, but none error
             if (status == ERROR && (!statusList.any(ERROR))) {
                 // handle jf sync issue (master idle, slaves stopped)
                 if (statusList.contains_only(IDLE, STOPPED)) {
@@ -1324,13 +1316,13 @@ void DetectorImpl::startAcquisition(const bool blocking, Positions pos) {
             Parallel(&Module::startAndReadAll, masters);
             // ensure all status normal (slaves not blocking)
             // to catch those slaves that are still 'waiting'
-            auto statusList = Parallel(&Module::getRunStatus, pos);
-            // if any slave still waiting, wait up to 1s (gotthard)
-            for (int i = 0; i != 20 && statusList.any(WAITING); ++i) {
+            auto status = Parallel(&Module::getRunStatus, pos);
+            // if any slave still waiting, wait up to 1s
+            for (int i = 0; i != 20 && status.any(WAITING); ++i) {
                 std::this_thread::sleep_for(std::chrono::milliseconds(50));
-                statusList = Parallel(&Module::getRunStatus, pos);
+                status = Parallel(&Module::getRunStatus, pos);
             }
-            if (!statusList.contains_only(IDLE, STOPPED, RUN_FINISHED)) {
+            if (!status.contains_only(IDLE, STOPPED, RUN_FINISHED)) {
                 throw RuntimeError("Acquisition not successful. "
                                    "Unexpected detector status");
             }

slsReceiverSoftware/src/HDF5DataFile.cpp

@@ -186,7 +186,7 @@ void HDF5DataFile::CreateFile() {
         // property list
         H5::DSetCreatPropList plist;
         H5::DSetCreatPropList plistPara;
-        uint64_t fill_value = -1;
+        int fill_value = -1;
         plist.setFillValue(dataType, &fill_value);
         // plistPara.setFillValue(dataType, &fill_value);
         plist.setChunk(DATA_RANK, dimsChunk);

slsReceiverSoftware/src/MasterFileUtility.cpp

@@ -215,12 +215,42 @@ std::string CreateVirtualHDF5File(
 
         // property list
         H5::DSetCreatPropList plist;
-        uint64_t fill_value = -1;
-        plist.setFillValue(dataType, &fill_value);
+        uint8_t u8 = -1;
+        uint16_t u16 = -1;
+        uint32_t u32 = -1;
+        uint64_t u64 = -1;
+        void* fill_value;
+
+        if (dataType == H5::PredType::STD_U8LE) {
+            fill_value = &u8;
+        } else if (dataType == H5::PredType::STD_U16LE) {
+            fill_value = &u16;
+        } else if (dataType == H5::PredType::STD_U32LE) {
+            fill_value = &u32;
+        } else if (dataType == H5::PredType::STD_U64LE) {
+            fill_value = &u64;
+        } else {
+            throw RuntimeError("Unsupported data type for virtual HDF5 file");
+        }
+        plist.setFillValue(dataType, fill_value);
+
+        //uint64_t fill_value = -1;
+        //plist.setFillValue(dataType, &fill_value);
         std::vector<H5::DSetCreatPropList> plistPara(paraSize);
         // ignoring last fill (string)
         for (unsigned int i = 0; i != plistPara.size() - 1; ++i) {
-            plistPara[i].setFillValue(parameterDataTypes[i], &fill_value);
+            if (parameterDataTypes[i] == H5::PredType::STD_U8LE) {
+                fill_value = &u8;
+            } else if (parameterDataTypes[i] == H5::PredType::STD_U16LE) {
+                fill_value = &u16;
+            } else if (parameterDataTypes[i] == H5::PredType::STD_U32LE) {
+                fill_value = &u32;
+            } else if (parameterDataTypes[i] == H5::PredType::STD_U64LE) {
+                fill_value = &u64;
+            } else {
+                throw RuntimeError("Unsupported data type for virtual HDF5 file");
+            }
+            plistPara[i].setFillValue(parameterDataTypes[i], fill_value);
         }
 
         // hyperslab (files)

slsSupportLib/include/sls/sls_detector_defs.h

@@ -215,13 +215,7 @@ typedef struct {
     /**
         type of action performed (for text client)
     */
-    enum {
-        GET_ACTION,
-        PUT_ACTION,
-        READOUT_ACTION,
-        HELP_ACTION,
-        READOUT_ZMQ_ACTION
-    };
+    enum { GET_ACTION, PUT_ACTION, READOUT_ACTION, HELP_ACTION };
 
     /**
         dimension indexes

slsSupportLib/include/sls/versionAPI.h

@@ -1,13 +1,13 @@
 // SPDX-License-Identifier: LGPL-3.0-or-other
 // Copyright (C) 2021 Contributors to the SLS Detector Package
 /** API versions */
-#define RELEASE      "8.0.2"
+#define RELEASE      "8.0.1"
+#define APIRECEIVER  "8.0.0 0x231108"
 #define APICTB       "8.0.0 0x231109"
 #define APIGOTTHARD  "8.0.0 0x231109"
 #define APIGOTTHARD2 "8.0.0 0x231109"
+#define APIJUNGFRAU  "8.0.0 0x231109"
 #define APIEIGER     "8.0.0 0x231109"
-#define APIJUNGFRAU  "8.0.2 0x240827"
-#define APIMOENCH    "8.0.2 0x240827"
-#define APIMYTHEN3   "8.0.2 0x240827"
-#define APILIB       "8.0.2 0x240916"
-#define APIRECEIVER  "8.0.2 0x240916"
+#define APILIB       "8.0.1 0x240112"
+#define APIMOENCH "8.0.2 0x240703"
+#define APIMYTHEN3 "8.0.2 0x240715"