updated versionign server color minor

Stopfix

RELEASE.txt

@@ -1,4 +1,4 @@
-SLS Detector Package 5.0.0-rc1 released on 25.09.2020 (Release Candidate 1)
+SLS Detector Package 5.0.0-rc2 released on 05.10.2020 (Release Candidate 2)
 ===========================================================================
 
     CONTENTS
@@ -17,8 +17,8 @@ SLS Detector Package 5.0.0-rc1 released on 25.09.2020 (Release Candidate 1)
         
         Jungfrau
         ========       
-        Minimum compatible version (PCB v1.0)  : 24.07.2020 (v0.8)
-        Latest compatible version  (PCB v1.0)  : 24.07.2020 (v0.8)
+        Minimum compatible version (PCB v1.0)  : 24.07.2020 (v1.1)
+        Latest compatible version  (PCB v1.0)  : 24.07.2020 (v1.1)
         Minimum compatible version (PCB v2.0)  : 21.07.2020 (v2.1)
         Latest compatible version  (PCB v2.0)  : 21.07.2020 (v2.1)
 

docs/CMakeLists.txt

@@ -39,7 +39,7 @@ set(SPHINX_SOURCE_FILES
   src/pyenums.rst
   src/pyexamples.rst
   src/servers.rst
-  src/receiver.rst
+  src/receiver_api.rst
   src/result.rst
   src/type_traits.rst
   src/ToString.rst
@@ -47,6 +47,10 @@ set(SPHINX_SOURCE_FILES
   src/pygettingstarted.rst
   src/firmware.rst
   src/serverupgrade.rst
+  src/virtualserver.rst
+  src/serverdefaults.rst
+  src/quick_start_guide.rst
+  src/troubleshooting.rst
   
 )
 

docs/src/consuming.rst

@@ -6,7 +6,7 @@ slsDetectorPackage there are a few different ways to
 consume our package. The recommended way is to use one of the 
 CMake approaches. 
 
-
+One can test with :ref:`detector simulators<Virtual Detector Servers>` before testing the API with a real detector or when a real detector is not at hand.
 
 CMake: slsDetectorPackage as submodule in your project
 ---------------------------------------

docs/src/firmware.rst

@@ -22,6 +22,11 @@ Compatibility
 `Older versions <https://www.psi.ch/en/detectors/latest-installation>`_
 
 
+Corrsponding Detector Server 
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+| **Location:**
+| 5.0.0-rc1: slsDetectorPackage/slsDetectorServer/eigerDetectorServer/bin/eigerDetectorServer_developer
+
 Upgrade
 ^^^^^^^^
 #. Tftp must be already installed on your pc to use the bcp executable.
@@ -107,8 +112,8 @@ Compatibility
     .. code-block:: bash
 
         # PCB v1.0
-        Minimum compatible version : 24.07.2020 (v0.8)
-        Latest compatible version  : 24.07.2020 (v0.8)
+        Minimum compatible version : 24.07.2020 (v1.1)
+        Latest compatible version  : 24.07.2020 (v1.1)
         # PCB v2.0
         Minimum compatible version : 21.07.2020 (v2.1)
         Latest compatible version  : 21.07.2020 (v2.1) 
@@ -116,6 +121,12 @@ Compatibility
 `Older versions <https://www.psi.ch/en/detectors/latest-installation>`_
 
 
+Corrsponding Detector Server 
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+| **Location:**
+| 5.0.0-rc1: slsDetectorPackage/slsDetectorServer/jungfrauDetectorServer/bin/jungfrauDetectorServer_developer
+
+
 Upgrade (from v4.x.x)
 ^^^^^^^^^^^^^^^^^^^^
 #. Tftp must be installed on pc.
@@ -153,7 +164,7 @@ Upgrade (from v4.x.x)
         sls_detector_put hostname bchipxxx
         sls_detector_put programfpga xxx.pof
 
-#. After programming, kill update server using Ctrl + C.
+#. After programming, kill 'update server' using Ctrl + C in server console.
 
 #. Enable server respawning if needed
     .. code-block:: bash
@@ -200,10 +211,14 @@ Compatibility
 
         Minimum compatible version  : 11.01.2013
         Latest compatible version   : 08.02.2018 (50um and 25um Master)
-                                  09.02.2018 (25 um Slave)  
+                                      09.02.2018 (25 um Slave)  
     
 `Older versions <https://www.psi.ch/en/detectors/latest-installation>`_
 
+Corrsponding Detector Server 
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+| **Location:**
+| 5.0.0-rc1: slsDetectorPackage/slsDetectorServer/gotthardDetectorServer/bin/gotthardDetectorServer_developer
 
 Upgrade
 ^^^^^^^^
@@ -243,6 +258,10 @@ Compatibility
         Minimum compatible version : 25.09.2020
         Latest compatible version  : 25.09.2020
     
+Corrsponding Detector Server 
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+| **Location:**
+| 5.0.0-rc1: slsDetectorPackage/slsDetectorServer/mythen3DetectorServer/bin/mythen3DetectorServer_developer
 
 Upgrade (from v5.0.0-rc1)
 ^^^^^^^^^^^^^^^^^^^^^^^^
@@ -276,6 +295,10 @@ Compatibility
         Minimum compatible version : 25.09.2020
         Latest compatible version  : 25.09.2020
     
+Corrsponding Detector Server 
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+| **Location:**
+| 5.0.0-rc1: slsDetectorPackage/slsDetectorServer/gotthard2DetectorServer/bin/gotthard2DetectorServer_developer
 
 Upgrade (from v5.0.0-rc1)
 ^^^^^^^^^^^^^^^^^^^^^^^^
@@ -309,6 +332,10 @@ Compatibility
         Minimum compatible version : 02.03.2020
         Latest compatible version  : 02.03.2020 
     
+Corrsponding Detector Server 
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+| **Location:**
+| 5.0.0-rc1: slsDetectorPackage/slsDetectorServer/moenchDetectorServer/bin/moenchDetectorServer_developer
 
 Upgrade (from v5.0.0-rc1)
 ^^^^^^^^^^^^^^^^^^^^^^^^
@@ -341,6 +368,10 @@ Compatibility
         Minimum compatible version : 27.11.2019
         Latest compatible version  : 27.11.2019
     
+Corrsponding Detector Server 
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+| **Location:**
+| 5.0.0-rc1: slsDetectorPackage/slsDetectorServer/ctbDetectorServer/bin/ctbDetectorServer_developer
 
 Upgrade (from v5.0.0-rc1)
 ^^^^^^^^^^^^^^^^^^^^^^^^

docs/src/index.rst

@@ -25,7 +25,7 @@ Welcome to slsDetectorPackage's documentation!
 
     detector
     result
-    receiver
+    receiver_api
     examples
 
 .. toctree::
@@ -42,6 +42,7 @@ Welcome to slsDetectorPackage's documentation!
     :maxdepth: 2
 
     commandline  
+    quick_start_guide
 
 .. toctree::
     :caption: Developer
@@ -51,15 +52,25 @@ Welcome to slsDetectorPackage's documentation!
     ToString
 
 .. toctree::
-    :caption: Servers
+    :caption: Firmware
+    :maxdepth: 2
+
+    firmware 
+
+.. toctree::
+    :caption: Detector Server
+    :maxdepth: 2
 
     servers
     serverupgrade
+    virtualserver
+    serverdefaults
 
 .. toctree::
-    :caption: Firmware
+    :caption: Troubleshooting
+
+    troubleshooting
 
-    firmware 
 
 .. Indices and tables
 .. ==================

docs/src/installation.rst

@@ -16,6 +16,7 @@
     manage the dependencies.
     
 
+.. _Installation:
 
 Installation
 ==============================================
@@ -48,6 +49,8 @@ Build using cmk.sh script
 -------------------------
 .. code-block:: bash
 
+    The binaries are generated in slsDetectorPackage/build/bin directory.
+
     # new build and make with 9 parallel threads
     ./cmk.sh -cbj9
 
@@ -85,6 +88,7 @@ We have three different packages available:
     conda config --set channel_priority strict
 
     #cerate an environment with our library, then activate
+    #replace 2020.07.20.dev0 with the required tag
     conda create -n myenv slsdetlib=2020.07.23.dev0
     conda activate myenv
 

docs/src/quick_start_guide.rst

@@ -0,0 +1,139 @@
+Quick Start Guide
+=================
+
+Detector
+--------
+Start up detector (with cooling if required). Ensure both control server and stop server is running on-board.
+
+Or use a detector simulator to test. Click :ref:`here<Virtual Detector Servers>` for further instructions.
+
+Receiver
+--------
+
+| One has to start the slsReceiver before loading config file or using any receiver commands (prefix: **rx_** )
+
+For a Single Module
+    .. code-block:: bash  
+
+        # default port 1954
+        slsReceiver
+
+        # custom port 2012
+        slsReceiver -t2012
+
+
+For Multiple Modules
+    .. code-block:: bash  
+
+        # slsMultiReceiver [starting port] [number of receivers] [print each frame header for debugging]
+        slsMultiReceiver 2012 2 0 
+
+
+Client
+------
+
+Refer :ref:`Sample Config file` to create config file.
+
+.. code-block:: bash  
+
+    # load config file
+    sls_detector_put config /path/sample.config
+
+    # set number of frames
+    sls_detector_put frames 5
+
+    # acquire
+    sls_detector_acquire
+
+
+.. _Sample Config file:
+
+Sample Config file
+^^^^^^^^^^^^^^^^^^
+There are sample config files for each detector in slsDetectorPackage/examples folder.
+
+For a Single Module
+    .. code-block:: bash  
+
+        # connects to module
+        hostname bchipxxx
+
+        # connects to receiver at default port
+        rx_hostname mpc1922
+        # or to connect to specific port
+        # rx_hostname mpc1922:2012
+
+        # sets destination udp ports (not needed, default is 50001)
+        udp_dstport 50012
+
+        # source udp ips must be same subnet at destintaion udp ips
+        udp_srcip 192.168.1.112
+
+        # destination udp ip picked up from rx_hostname (if auto)
+        udp_dstip auto
+
+        # set file path
+        fpath /tmp
+
+For a Single Module with custom Receiver (not slsReceiver)
+    .. code-block:: bash  
+
+        # connects to module
+        hostname bchipxxx
+
+        # sets destination udp ports (not needed, default is 50001)
+        udp_dstport 50012
+
+        # source udp ips must be same subnet at destintaion udp ips
+        udp_srcip 192.168.1.112
+
+        # destination udp ip 
+        udp_dstip 192.168.1.100
+
+        # source udp mac 
+        udp_srcmac aa:bb:cc:dd:ee:ff
+        
+        # destination udp mac 
+        udp_dstmac 3c:ab:98:bf:50:60
+
+        # set file path
+        fpath /tmp
+
+For Multiple Modules
+    .. code-block:: bash  
+
+        # connects to mulitple modules
+        hostname bchipxxx+bchipyyy+
+
+        # connects to receivers at ports 2012 and 2014
+        rx_hostname mpc1922:2012+mpc1922:2013+
+
+        # sets differernt destination udp ports
+        0:udp_dstport 50012
+        1:udp_dstport 50014
+
+        # source udp ips must be same subnet at destintaion udp ips
+        0:udp_srcip 192.168.1.112
+        1:udp_srcip 192.168.1.114
+
+        # destination udp ip picked up from rx_hostname (if auto)
+        udp_dstip auto
+
+        # set file path
+        fpath /tmp
+
+Gui
+----
+
+Compile with SLS_USE_GUI=ON in cmake or -g option in cmk.sh script. One can also just use the conda binary. Refer :ref:`installation instructions<Installation>`.
+
+.. code-block:: bash  
+
+    slsDetectorGui
+
+
+.. note ::
+    | The streaming frequency (commmand: rx_zmqfreq) is set by default in the receiver to 1 (send every frame).
+    | At Gui startup, this value is set to 0. It will set to use a timer of 500 ms. Hence, every frame will not be streamed to the gui. This is done to reduce the load for fast and large detectors for display purposes.
+    | One can still change this setting in the gui in the Plot tab (Plotting frequency) or from the command line (rx_zmqfreq).
+    | First frame is always streamed out, no matter if timer or frequency is used.

docs/src/serverdefaults.rst

@@ -0,0 +1,106 @@
+Default Values
+==============================================
+
+Mythen3
+-------------
+
+.. csv-table:: Default values
+   :file: mythen3.csv
+   :widths: 35, 35
+   :header-rows: 1
+
+DACS
+^^^^^^^^^^^^^
+
+.. csv-table:: Mythen3 DACS
+   :file: mythen3-dacs.csv
+   :widths: 35, 35
+   :header-rows: 1
+
+Gotthard2
+-------------
+
+.. csv-table:: Default values
+   :file: gotthard2.csv
+   :widths: 35, 35
+   :header-rows: 1
+
+DACS
+^^^^^^^^^^^^^
+
+.. csv-table:: Gotthard 2 DACS
+   :file: gotthard2-dacs.csv
+   :widths: 35, 35
+   :header-rows: 1
+
+Moench
+-------------
+
+.. csv-table:: Default values
+   :file: moench.csv
+   :widths: 35, 35
+   :header-rows: 1
+
+DACS
+^^^^^^^^^^^^^
+
+.. csv-table:: Moench DACS
+   :file: moench-dacs.csv
+   :widths: 35, 35
+   :header-rows: 1
+
+Ctb
+-------------
+
+.. csv-table:: Default values
+   :file: ctb.csv
+   :widths: 35, 35
+   :header-rows: 1
+
+Eiger
+-------------
+
+.. csv-table:: Default values
+   :file: eiger.csv
+   :widths: 35, 35
+   :header-rows: 1
+
+DACS
+^^^^^^^^^^^^^
+
+.. csv-table:: Eiger DACS
+   :file: eiger-dacs.csv
+   :widths: 35, 35
+   :header-rows: 1
+
+Jungfrau
+-------------
+
+.. csv-table:: Default values
+   :file: jungfrau.csv
+   :widths: 35, 35
+   :header-rows: 1
+
+DACS
+^^^^^^^^^^^^^
+
+.. csv-table:: Jungfrau DACS
+   :file: jungfrau-dacs.csv
+   :widths: 35, 35
+   :header-rows: 1
+
+Gotthard
+-------------
+
+.. csv-table:: Default values
+   :file: gotthard.csv
+   :widths: 35, 35
+   :header-rows: 1
+
+DACS
+^^^^^^^^^^^^^
+
+.. csv-table:: Gotthard DACS
+   :file: gotthard-dacs.csv
+   :widths: 35, 35
+   :header-rows: 1

docs/src/servers.rst

@@ -1,108 +1,25 @@
-Default values
-==============================================
+Detector Servers
+=================
 
-Some general intro 
+Detector Servers include:
+   * Control server [default port: 1952]
+      * Almost all client communication.
+   * Stop server [default port: 1953]
+      *  Client requests for detector status, stop acquisition, temperature, advanced read/write registers.
 
-Mythen3
--------------
+When using a blocking acquire command (sls_detector_acquire or Detector::acquire), the control server is blocked until end of acquisition. However, stop server commands could be used in parallel.
 
-.. csv-table:: Default values
-   :file: mythen3.csv
-   :widths: 35, 35
-   :header-rows: 1
+.. _Detector Server Arguments:
+Arguments
+---------
 
-DACS
-^^^^^^^^^^^^^
+    .. code-block:: bash  
 
-.. csv-table:: Mythen3 DACS
-   :file: mythen3-dacs.csv
-   :widths: 35, 35
-   :header-rows: 1
-
-Gotthard2
--------------
-
-.. csv-table:: Default values
-   :file: gotthard2.csv
-   :widths: 35, 35
-   :header-rows: 1
-
-DACS
-^^^^^^^^^^^^^
-
-.. csv-table:: Gotthard 2 DACS
-   :file: gotthard2-dacs.csv
-   :widths: 35, 35
-   :header-rows: 1
-
-Moench
--------------
-
-.. csv-table:: Default values
-   :file: moench.csv
-   :widths: 35, 35
-   :header-rows: 1
-
-DACS
-^^^^^^^^^^^^^
-
-.. csv-table:: Moench DACS
-   :file: moench-dacs.csv
-   :widths: 35, 35
-   :header-rows: 1
-
-Ctb
--------------
-
-.. csv-table:: Default values
-   :file: ctb.csv
-   :widths: 35, 35
-   :header-rows: 1
-
-Eiger
--------------
-
-.. csv-table:: Default values
-   :file: eiger.csv
-   :widths: 35, 35
-   :header-rows: 1
-
-DACS
-^^^^^^^^^^^^^
-
-.. csv-table:: Eiger DACS
-   :file: eiger-dacs.csv
-   :widths: 35, 35
-   :header-rows: 1
-
-Jungfrau
--------------
-
-.. csv-table:: Default values
-   :file: jungfrau.csv
-   :widths: 35, 35
-   :header-rows: 1
-
-DACS
-^^^^^^^^^^^^^
-
-.. csv-table:: Jungfrau DACS
-   :file: jungfrau-dacs.csv
-   :widths: 35, 35
-   :header-rows: 1
-
-Gotthard
--------------
-
-.. csv-table:: Default values
-   :file: gotthard.csv
-   :widths: 35, 35
-   :header-rows: 1
-
-DACS
-^^^^^^^^^^^^^
-
-.. csv-table:: Gotthard DACS
-   :file: gotthard-dacs.csv
-   :widths: 35, 35
-   :header-rows: 1
+        Possible arguments are:
+        -v, --version            : Software version
+        -p, --port <port>        : TCP communication port with client. 
+        -g, --nomodule           : [Mythen3][Gotthard2] Generic or No Module mode. Skips detector type checks.
+        -f, --phaseshift <value> : [Gotthard] only. Sets phase shift. 
+        -d, --devel              : Developer mode. Skips firmware checks. 
+        -u, --update             : Update mode. Skips firmware checks and initial detector setup. 
+        -s, --stopserver         : Stop server. Do not use as it is created by control server 

docs/src/serverupgrade.rst

@@ -1,11 +1,16 @@
-Server Upgrade
-=================
+Detector Server Upgrade
+=======================
 
 
 
 Eiger
 -------------
 
+
+| **Location:**
+| 5.0.0-rc1: slsDetectorPackage/slsDetectorServer/eigerDetectorServer/bin/eigerDetectorServer_developer
+
+
 #. Kill old server and copy new server
     .. code-block:: bash
 
@@ -34,6 +39,10 @@ Eiger
 Jungfrau
 -------------
 
+| **Location:**
+| 5.0.0-rc1: slsDetectorPackage/slsDetectorServer/jungfrauDetectorServer/bin/jungfrauDetectorServer_developer
+
+#. Install tftp and copy detector server binary to tftp folder
 #. Program from console (only from 5.0.0-rc1)
     .. code-block:: bash
 
@@ -43,6 +52,11 @@ Jungfrau
 
 Gotthard
 ---------
+
+| **Location:**
+| 5.0.0-rc1: slsDetectorPackage/slsDetectorServer/gotthardDetectorServer/bin/gotthardDetectorServer_developer
+
+#. Install tftp and copy detector server binary to tftp folder
 #. Program from console (only from 5.0.0-rc1)
     .. code-block:: bash
 
@@ -54,6 +68,10 @@ Gotthard
 Mythen3
 -------
 
+| **Location:**
+| 5.0.0-rc1: slsDetectorPackage/slsDetectorServer/mythen3DetectorServer/bin/mythen3DetectorServer_developer
+
+#. Install tftp and copy detector server binary to tftp folder
 #. Program from console (only from 5.0.0-rc1)
     .. code-block:: bash
 
@@ -63,6 +81,11 @@ Mythen3
 
 Gotthard2
 ----------
+
+| **Location:**
+| 5.0.0-rc1: slsDetectorPackage/slsDetectorServer/gotthard2DetectorServer/bin/gotthard2DetectorServer_developer
+
+#. Install tftp and copy detector server binary to tftp folder
 #. Program from console (only from 5.0.0-rc1)
     .. code-block:: bash
 
@@ -72,6 +95,11 @@ Gotthard2
 
 Moench
 ------
+
+| **Location:**
+| 5.0.0-rc1: slsDetectorPackage/slsDetectorServer/moenchDetectorServer/bin/moenchDetectorServer_developer
+
+#. Install tftp and copy detector server binary to tftp folder
 #. Program from console (only from 5.0.0-rc1)
     .. code-block:: bash
 
@@ -81,6 +109,11 @@ Moench
 
 Ctb
 ---
+
+| **Location:**
+| 5.0.0-rc1: slsDetectorPackage/slsDetectorServer/ctbDetectorServer/bin/ctbDetectorServer_developer
+
+#. Install tftp and copy detector server binary to tftp folder
 #. Program from console (only from 5.0.0-rc1)
     .. code-block:: bash
 

docs/src/troubleshooting.rst

@@ -0,0 +1,295 @@
+Troubleshooting
+=================
+
+Common
+------
+
+Missing Packets
+^^^^^^^^^^^^^^^
+Possible causes could be the following:
+
+#. Receiver PC is not tuned for socket buffer size and input packet queue.
+    * Refer to :ref:`Increase rmem_default, rmem_max and max_backlog<Receiver PC Tuning>`
+
+#. Wiring
+    * Faulty wiring or connecting cable to incorrect interface.
+
+#. Link up and speed
+    * Check to see if there is a blue LED on board to signal that the link is up. Check ethtool and find if Link Deteced:Yes and Speed is acceptable (>10k).
+
+#. Detector is not acquiring (Not Eiger)
+    * Take an acquisition with many images and using the following steps instead of acquire:
+        .. code-block:: bash
+
+            sls_detector_put status start
+            # keep executing this command to see if the number of frames left keeps decreasing,
+            # which means the detector is acquiring.
+            sls_detector_get framesl 
+
+    .. note ::
+    
+        If you are using multiple modules, the previous command can return -1 because each module will return different values. Then, check for a single module instead: sls_detector_get 0:framesl
+
+#. Data cable plugged into the wrong interface on board (Jungfrau)
+    * Please ensure that the data cable is plugged into the rightmost interface. The middle one is disabled for PCB v1.0 and must be selected via command for PCB v2.0.
+
+#. Detector is not sending data
+    * Check the board to see if the green LED is blinking next to the data cable, which means that the detector is sending data.
+
+#. Firewall or security feature
+    * A firewall or some security feature could be blocking the reception of data.
+
+#. Ethernet interface not configured properly
+    * Ensure that the interfaces used are configured properly with the right mask and ip. Eg. use ifconfig and route commands to verify.
+
+#. Ethernet interface not configured for Jumbo frames (10Gb)
+    * Ensure that the interfaces used in receiver pc have MTU 9000 (jumbo frames) enabled.
+
+#. Detector IP (Not Eiger)
+    * Ensure it is valid and does not end if 0 or 255. Also ensure that the detector ip is in the same subnet as rx_udpip and the masking in the interface configuration ensures this rule.
+
+#. Tcpdump or wireshark
+    * Use one of these to confirm that you receive packets (with the right filtering ie. source and destination ports, ip).
+
+#. Check SFP modules
+    * Check if the SFP modules on both sides of the fiber are of same type.
+
+#. Pinging the subnet (receiving only a few number of packets each time)
+    * If a switch is used between a receiver pc and detector instead of plugging the cables directly, one might have to ping any ip in the subnet of the Ethernet interface constantly so that it does not forget the ip during operation.
+    * Eg. if rx_udpip is 10.2.3.100, then ping constantly 10.2.3.xxx, where xxx is any ip other than 100.
+
+
+
+.. _Receiver PC Tuning:
+
+Receiver PC Tuning Options
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+#. Increase maximum receive socket buffer size and socket input packet queue. 
+    * Temporarily (until shut down)
+        .. code-block:: bash
+            
+            # check size
+            sysctl -a | grep rmem
+            sysctl -a | grep backlog
+
+            # set max and default (use 1Gb for Jungfrau and 100Mb for others)
+            sysctl net.core.rmem_max=$((100*1024*1024)) 
+            sysctl net.core.rmem_default=$((100*1024*1024))
+            sysctl net.core.netdev_max_backlog=250000
+
+
+    * Permanently
+            .. code-block:: bash
+
+                # edit /etc/sysctl.conf file
+                # set max and default (use 1Gb for Jungfrau and 100Mb for others)
+                net.core.rmem_max = 104857600
+                net.core.rmem_default= 104857600
+                net.core.netdev_max_backlog = 250000
+
+                # save file and run the following
+                sysctl -p
+
+    .. note ::
+        This is the most basic setting, which is sometimes more than enough.
+
+#. For 10Gb,
+    * MTU must be set up to 9000 for jumbo frames on detector, switch and server NIC
+    
+    * Set up static MAC address tables with separated VLANs
+
+#. Write to memory if not a large disk and pc not fast enough.
+    .. code-block:: bash
+
+        mount -t tmpfs none /ramdisk_folder
+        # or
+        mount -t tmpfs none /mnt/ramdisk -o size=10G
+        # check how many GB memory you can allocate, to avoid swapping otherwise    
+
+
+#. Modify ethtool settings. 
+    * rx ring parameters
+        .. code-block:: bash
+
+            # check 
+            ethtool -g xth1
+
+            # set to max value in your pc settings
+            ethtool -G xth1 rx 4096 
+
+    * coalesce settings (might not always work)
+        .. code-block:: bash
+
+            # check 
+            ethtool -c xth1
+
+            # set to max value in your pc settings
+            ethtool -C xth1 rx-usecs 100 
+
+    * pause parameters
+        .. code-block:: bash
+
+            # check 
+            ethtool -a xth1
+
+            # set to max value in your pc settings
+            ethtool -A xth1 rx on
+ 
+    .. note ::
+
+        | xth1 is example interface name. 
+        | These settings are lost at pc reboot.
+
+#. Give user speicific user scheduling privileges.
+    .. code-block:: bash
+
+        # edit /etc/security/limits.conf
+        # add following line or similar depending on your distribution
+        username rtprio 99
+
+    .. note ::
+
+        This is also set if slsReceiver is run as root user.
+        
+        
+#. Disable power saving in CPU frequency 
+    .. code-block:: bash
+
+        # or similar command depending on your distribution
+        cpupower frequency-info
+        cpupower frequency-set -g performance
+
+        # or
+        cpufreq-info
+        for i in ‘seq 0 7‘; do cpufreq-set -c $i -g performance; done
+
+
+slsReceiver Tuning
+^^^^^^^^^^^^^^^^^^
+
+#. Starting receiver as root to have scheduling privileges.
+
+#. For 10g, enable flow control
+    .. code-block:: bash
+
+        sls_detector_put flowcontrol10g 1
+
+#. Increase slsReceiver fifo depth between listening and processing threads.
+    .. code-block:: bash
+
+        sls_detector_get rx_fifodepth
+        # sets number of frames in fifo to 5000
+        sls_detector_put rx_fifodepth 5000
+
+#. Increase number of frames per file to reduce time taken to open and close files.
+    .. code-block:: bash
+
+        sls_detector_get rx_framesperfile
+        sls_detector_put rx_framesperfile 20000
+        # writes all frames into a single file
+        sls_detector_put rx_framesperfile 0
+
+
+Shared memory error
+^^^^^^^^^^^^^^^^^^^
+| For errors due to access or size, delete shared memory files nd try again.
+
+To list all shared memory files of sls detector package.
+    .. code-block:: bash
+        
+        ll /dev/shm/slsDetectorPackage*
+        -rw-------. 1 l_d l_d  136 Oct  1 11:42 /dev/shm/slsDetectorPackage_multi_0
+        -rw-------. 1 l_d l_d 3476 Oct  1 11:42 /dev/shm/slsDetectorPackage_multi_0_sls_0
+        -rw-------. 1 l_d l_d 3476 Oct  1 11:42 /dev/shm/slsDetectorPackage_multi_0_sls_1
+
+Cannot connect to detector
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+Ensure both control and stop servers are running on the detector.
+    .. code-block:: bash
+
+        ps -ef | grep jungfrauDetectorServer*
+
+Cannot connect to receiver
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+Start receiver before running a client command that needs to communicate with receiver.
+
+Receiver: cannot bind socket
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+#. slsReceiver or slsMultiReceiver is already open somewhere.
+    * Kill it and restart it.
+
+#. Tcp port is in use by another application.
+    * Start Receiver with a different tcp port and adjust it config file
+        .. code-block:: bash
+
+            # restart receiver with different port
+            slsReceiver -t1980
+
+            # adjust in config file
+            rx_hostname pcxxxx:1980
+
+.. _common troubleshooting multi module data:
+
+Cannot get multi module data
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Possible causes could be the following:
+
+#. Network
+    * If you have a direct connection, check to see if the network cables are connected correctly to corresponding interfaces on the PC side. Check also the network configuration and that the detectors and receivers are in the corresponding subnet.
+
+#. Power Supply
+    * Check power supply current limit.
+    * For Jungfrau, refer to :ref:`Jungfrau Power Supply Troubleshooting<Jungfrau Troubleshooting Power Supply>`.
+
+
+
+Gotthard
+----------
+
+
+Missing first frame or next frame after a delay
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+Connect the data link from the Module directly to receiver pc or to a private network.
+
+
+Jungfrau
+---------
+
+Temperature event occured
+^^^^^^^^^^^^^^^^^^^^^^^^^
+This will occur only if:
+* temp_threshold (threshold temperature) has been set to a value
+* temp_control (temperature control) set to 1
+* and the temperature overshooted the threshold temperature.
+
+**Consequence**
+* sls_detector_get temp_event will give 1 # temperature event occured
+* the chip will be powered off
+
+**Solution**
+* Even after fixing the cooling, any subsequent powerchip command will fail unless the temperature event has been cleared.
+
+* Clear the temperature event
+    .. code-block:: bash
+        
+        # gives the current chip power status (zero currently as chip powered off)
+        sls_detector_get powerchip 
+
+        # clear temperature event
+        sls_detector_put temp_event 0
+
+        # power on the chip
+        sls_detector_put powerchip 1 
+
+
+.. _Jungfrau Troubleshooting Power Supply:
+
+Cannot get multi module data
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+#. Check :ref:`Common Multi Module Troubleshooting<common troubleshooting multi module data>`
+#. Power Supply
+    * Comment out this line in the config file: powerchip 1
+    * Powering on the chip increases the power consumption by a considerable amount. If commenting out this line aids in getting data (strange data due to powered off chip), then it could be the power supply current limit. Fix it (possibly to 8A current limit) and uncomment the powerchip line back in config file.
+

docs/src/virtualserver.rst

@@ -0,0 +1,148 @@
+.. _Virtual Detector Servers:
+Detector Simulators
+===================
+
+Compilation
+-----------
+
+* Using CMake, turn on the option 
+    .. code-block:: bash  
+        
+        SLS_USE_SIMULATOR=ON
+
+* Using cmk.sh script,
+     .. code-block:: bash  
+        
+        ./cmk.sh -b**s**j9 #option s is for simulator
+
+
+Binaries
+^^^^^^^^
+    .. code-block:: bash  
+
+        eigerDetectorServerMaster_virtual
+        eigerDetectorServerSlaveTop_virtual
+        eigerDetectorServerSlaveBottom_virtual
+        jungfrauDetectorServer_virtual
+        gotthardDetectorServer_virtual
+        gotthard2DetectorServer_virtual
+        mythen3DetectorServer_virtual
+        moenchDetectorServer_virtual
+        ctbDetectorServer_virtual
+
+
+Arguments
+---------
+
+The arguments are the same as the :ref:`normal server arguments<Detector Server Arguments>`.
+
+When using multiple modules, use different ports for each virtual server.
+    .. code-block:: bash  
+
+        # will start control server at port 1912 and stop server at port 1913
+        jungfrauDetectorServer --port 1912 &
+
+        # will start second control server at port 1914 and stop server at port 1915
+        jungfrauDetectorServer --port 1914 &
+
+
+Client
+------
+
+.. code-block:: bash  
+
+    # hostname should include the port (if not default)
+    sls_detector_put hostname localhost:1912+localhost:1914+
+
+    # or use virtual command, instead of hostname
+    # connects to 2 servers at localhost 
+    # (control servers: 1912, 1914; stop servers: 1913, 1915)
+    sls_detector_put virtual 2 1912 
+
+Use the same in the config file.
+
+
+Sample Config file
+^^^^^^^^^^^^^^^^^^
+There are sample config files for each detector in slsDetectorPackage/examples folder.
+
+For a Single Module
+    .. code-block:: bash  
+
+        # connects to control port 1912
+        hostname localhost:1912+
+
+        # connects to receiver at ports 2012
+        rx_hostname mpc1922:2012+
+
+        # sets destination udp ports (not needed, default is 50001)
+        udp_dstport 50012
+
+        # source udp ips must be same subnet at destintaion udp ips
+        udp_srcip 192.168.1.112
+
+        # destination udp ip picked up from rx_hostname (if auto)
+        udp_dstip auto
+
+        # set file path
+        fpath /tmp
+
+For Multiple Modules
+    .. code-block:: bash  
+
+        # connects to control ports 1912, 1914 and stop ports 1913, 1915
+        virtual 2 1912
+        # or hostname localhost:1912+localhost:1914+
+
+        # connects to receivers at ports 2012 and 2014
+        rx_hostname mpc1922:2012+mpc1922:2013+
+
+        # sets differernt destination udp ports
+        0:udp_dstport 50012
+        1:udp_dstport 50014
+
+        # source udp ips must be same subnet at destintaion udp ips
+        0:udp_srcip 192.168.1.112
+        1:udp_srcip 192.168.1.114
+
+        # destination udp ip picked up from rx_hostname (if auto)
+        udp_dstip auto
+
+        # set file path
+        fpath /tmp
+
+Receivers
+----------
+Same as if you would use an actual detector
+
+For a Single Module
+    .. code-block:: bash  
+
+        slsReceiver -t2012
+
+
+For Multiple Modules
+    .. code-block:: bash  
+
+        # slsMultiReceiver [starting port] [number of receivers] [print each frame header for debugging]
+        slsMultiReceiver 2012 2 0 
+
+Gui
+----
+| Same as if you would use an actual detector.
+| Compile with SLS_USE_GUI=ON in cmake or -g option in cmk.sh script.
+
+.. code-block:: bash  
+
+    slsDetectorGui
+
+Limitations
+-----------
+
+#. Data coming out of virtual server is fake. Value at each pixel/ channel is incremented by 1.
+
+#. A stop will stop the virtual acquisition only at the start of every new frame.
+
+#. Triggers are counted as number of virtual frames. trigger command to send a software trigger (Mythen3 & Eiger) is not implemented in virtual server.
+
+#. firmware version and serial number will give 0.

examples/eiger_10Gb.config

@@ -1,33 +1,37 @@
-detsizechan 1024 512 
-#detetctor geometry, long side of the module first
+# detetctor geometry, long side of the module first
+detsize 1024 512 
+
+# detector hostname for controls
 hostname beb059+beb058+ 
-#1Gb detector hostname for controls
 
-0:rx_tcpport 1991 
-#tcpport for the first halfmodule                 
-0:rx_udpport 50011 
-#udp port first quadrant, first halfmodule       
-0:rx_udpport2 50012 
-#udp port second quadrant, first halfmodule       
-0:rx_udpip 10.0.30.210 
-#udp IP of the receiver over 10Gb              
-0:detectorip 10.0.30.100 
-#first half module 10 Gb IP 
+# 1Gb receiver pc hostname with tcp port to configure receiver
+rx_hostname x12sa-vcons:1991+x12sa-vcons:1992
 
-1:rx_tcpport 1992 
-#tcpport for the second halfmodule                  
-1:rx_udpport 50013 
-#udp port first quadrant, second halfmodule     
-1:rx_udpport2 50014 
-#udp port second quadrant, second halfmodule  
-1:rx_udpip 10.0.40.210  
-#udp IP of the receiver over 10Gb, 
-#can be the same or different from 0:rx_udpip                                   
-1:detectorip 10.0.40.101 
-#second half module 10 Gb IP 
+# udp port first quadrant, first halfmodule         
+0:udp_dstport 50011 
 
-rx_hostname x12sa-vcons 
-#1Gb receiver pc hostname
+# udp port second quadrant, first halfmodule       
+0:udp_dstport2 50012 
 
-outdir /sls/X12SA/data/x12saop/Data10/Eiger0.5M
-threaded 1
+# udp IP of the receiver over 10Gb              
+0:udp_dstip 10.0.30.210 
+
+# first half module 10 Gb IP (same subnet as 0:udp_dstip)
+0:udp_srcip 10.0.30.100 
+
+# udp port first quadrant, second halfmodule       
+1:udp_dstport 50013 
+
+# udp port second quadrant, second halfmodule  
+1:udp_dstport2 50014 
+    
+# udp IP of the receiver over 10Gb, 
+1:udp_dstip 10.0.40.210  
+
+# second half module 10 Gb IP 
+# can be the same or different from 0:rx_udpip 
+# butsame subnet as 1:udp_dstip                              
+1:udp_srcip 10.0.40.101 
+
+# output directory
+fpath /sls/X12SA/data/x12saop/Data10/Eiger0.5M

examples/eiger_1Gb.config

@@ -1,24 +1,21 @@
-detsizechan 1024 512 
-#detetctor geometry, long side of the module first
+# detetctor geometry, long side of the module first
+detsize 1024 512 
+
+# detector hostname for controls
 hostname beb059+beb058+ 
-#1Gb detector hostname for controls
 
-0:rx_tcpport 1991 
-#tcpport for the first halfmodule                 
-0:rx_udpport 50011 
-#udp port first quadrant, first halfmodule         
-0:rx_udpport2 50012 
+# 1Gb receiver pc hostname with tcp port to configure receiver
+rx_hostname x12sa-vcons:1991+x12sa-vcons:1992
+
+# udp port first quadrant, first halfmodule         
+0:udp_dstport 50011 
 #udp port second quadrant, first halfmodule       
+0:udp_dstport2 50012 
 
-1:rx_tcpport 1992 
-#tcpport for the second halfmodule               
-1:rx_udpport 50013 
-#udp port first quadrant, second halfmodule       
-1:rx_udpport2 50014 
-#udp port second quadrant, second halfmodule  
+# udp port first quadrant, second halfmodule       
+1:udp_dstport 50013 
+# udp port second quadrant, second halfmodule  
+1:udp_dstport2 50014 
     
-rx_hostname x12sa-vcons 
-#1Gb receiver pc hostname
-
-outdir /sls/X12SA/data/x12saop/Data10/Eiger0.5M
-threaded 1
+# output directory
+fpath /sls/X12SA/data/x12saop/Data10/Eiger0.5M

examples/gotthard.config

@@ -1,27 +1,12 @@
+# detector hostname
 hostname bchip007
 
-#0:port 1952
-#0:stopport 1953
-#0:rx_tcpport 1956 must also have this in receiver config file
-0:angdir 1.000000
-0:moveflag 0.000000
-0:extsig:0 off
-#0:detectorip 129.129.202.9
-0:detectormac 00:aa:bb:cc:dd:ee
-0:rx_udpport 50004
-0:rx_udpip 129.129.202.98
-0:rx_hostname pc6898
-0:outdir /bigRAID/datadir_gotthard/rec_test_data
-0:highvoltage 120
-master -1
-sync none
-outdir /bigRAID/datadir_gotthard/rec_test_data
-headerbefore none
-headerafter none
-headerbeforepar none
-headerafterpar none
-badchannels none
-angconv none
-globaloff 0.000000
-binsize 0.001000
+# receiver pc hostname of 1Gb IP of the machine
+rx_hostname my_receiver_hostname
+
+# output directory
+fpath  /bigRAID/datadir_gotthard/rec_test_data
+
+# high voltage
+highvoltage 120
 

examples/gotthard_II.config

@@ -1,29 +1,34 @@
+# detector hostname
 hostname strip3
 
+# receiver pc hostname with tcp port
+rx_hostname pc12365:1982
+
+# udp source ip
 udp_srcip 10.1.1.184
+
+# udp destination ip (receiver interface ip)
 udp_dstip 10.1.1.107
 
+# only needed for debugging veto signals
+# udp destination port must be different from udp_dstport (default of 50001)
 udp_dstport2 50084
 udp_srcip2 10.1.1.185
 udp_dstip2 10.1.1.107
 
-rx_hostname pc12365:1954
-#udp_dstmac 3c:fd:fe:d2:a4:25
+# output directory
 fpath  /tmp
-fname run
+
+# disable file writing
 fwrite 0
 
-bursts 10
-frames 2700
-burstperiod 100ms
-
+# to enable 2nd interface for veto debugging
 numinterfaces 2
+
+# enable veto data streaming
 veto 1
 
-#fixing data looks
 # Sampling pipeline 1 clk
 reg 0x120 0x00000010
 clkphase 1 135 deg
 
-
-

examples/gotthard_setup.det

@@ -1,32 +0,0 @@
-fname run
-index 0
-dr 16
-settings veryhighgain
-threshold 0
-exptime 0.000002990
-period 0.000024984
-delay 0.999999968
-gates 1
-frames 300000.000000000
-triggers 1.000000000
-timing auto
-fineoff 0.000000
-startscript none
-startscriptpar none
-stopscript none
-stopscriptpar none
-scriptbefore none
-scriptbeforepar none
-scriptafter none
-scriptafterpar none
-scan0script none
-scan0par none
-scan0prec 0
-scan0steps 0 
-scan1script none
-scan1par none
-scan1prec 0
-scan1steps 0 
-ratecorr 0.000000
-flatfield none
-badchannels none

examples/gotthard_two.config

@@ -1,17 +1,17 @@
-detsizechan 2560 1
-
+# detector hostname
 hostname bchip074+bchip075+
 
+# receiver pc hostname of 1Gb IP of the machine (with tcpport)
+rx_hostname my_receiver_hostname+my_receiver_hostname:1955
 
-0:extsig:0 trigger_in_rising_edge
-0:rx_tcpport 1954
-0:rx_udpport 50001
-0:highvoltage 0
+# default udp destination port 50001
+1:udp_dstport 50002
 
-1:extsig:0 trigger_in_rising_edge
-1:rx_tcpport 1955
-1:rx_udpport 50002
-1:highvoltage 0
+# output directory
+fpath  /tmp
+
+extsig 0 trigger_in_rising_edge
+highvoltage 0
 
 ##############################################################################
 #########
@@ -19,39 +19,27 @@ hostname bchip074+bchip075+
 #########
 ##############################################################################
 
-# #replace my_receiver_hostname with the hostname of IP of the machine where the receiver runs
-#0:rx_zmqip my_receiver_hostname 
-#0:rx_zmqport 30003
-# #replace my_client_hostname with the hostname of IP of the machine where the client/GUI or softIOC runs
-#0:zmqip my_client_hostname 
-#0:zmqport  40003
+## receiver pc hostname of 1Gb IP of the machine
+#rx_zmqip my_receiver_hostname 
+## client/gui or softIOc pc hostname
+#zmqip my_client_hostname 
 
-# #replace my_receiver_hostname with the hostname of IP of the machine where the receiver runs
-#1:rx_zmqip my_receiver_hostname 
+## rxr zmq streaming out port
+#0:rx_zmqport 30003
+## client zmq listening port
+#0:zmqport  40003
+## rxr zmq streaming out port
 #1:rx_zmqport 30004
-# #replace my_client_hostname with the hostname of IP of the machine where the client/GUI or softIOC runs
-#1:zmqip  my_client_hostname 
+## client zmq listening port
 #1:zmqport  40004
 
+## stream out every frame via zmq
+#rx_zmqfreq 1
+## enable zmq streaming
+#rx_zmqstream 1
+
 ##############################################################################
 #########
 ######### until here
 #########
 ##############################################################################
-
-
-r_readfreq 1
-rx_zmqstream 1
-
-#replace my_receiver_hostname with the hostname of 1Gb IP of the machine where the receiver runs
-rx_hostname my_receiver_hostname
-rx_zmqstream 1
-outdir /tmp/
-
-
-settings veryhighgain
-exptime 0.000005
-period 0.0001
-
-highvoltage 90
-

examples/jctb_moench03_T1.config

@@ -8,8 +8,6 @@ adcclk 20
 dbitclk 40
 
 
-
-
 patword 0000 0000000000000000
 patword 0001 0000000000000000
 patword 0002 0008000900080000
@@ -424,21 +422,24 @@ patwaittime1 0
 patwait2 0400
 patwaittime2 0
 
-
-#0:rx_tcpport 1977
+#############################################
+### edit with hostname or 1Gbs IP address of your server
+############################################
+rx_hostname mpc2011
+#rx_hostname mpc2011:1977
 
 #############################################
 ### edit with 10 Gbs IP of your server
 ############################################
-0:udp_dstip 10.1.1.102
-#0:udp_dstip 129.129.202.136
+udp_dstip 10.1.1.102
+#udp_dstip 129.129.202.136
 #############################################
 ### edit with any number in the subnet of your server (first 3 numbers as above)
 ############################################
-0:udp_srcip 10.1.1.19
-#0:udp_srcip 129.129.202.13
+udp_srcip 10.1.1.19
+#udp_srcip 129.129.202.13
 
-0:udp_dstport 33410
+udp_dstport 33410
 #############################################
 ### edit with 10 Gbs IP of your server
 ############################################
@@ -452,13 +453,7 @@ patwaittime2 0
 #zmqport 50001
 
 
-#############################################
-### edit with hostname or 1Gbs IP address of your server
-############################################
-rx_hostname mpc2011
-
 tengiga 1
-
 rx_zmqstream 1
 rx_zmqfreq 1
 
@@ -496,6 +491,5 @@ rx_jsonpara detectorMode analog
 #flags newpedestal
 #flags analog
 
-reg 0x5e 0x00010000
-#powerchip 1
+powerchip 1
 highvoltage 90

examples/jungfrau.config

@@ -1,16 +1,41 @@
-hostname localhost
+# detector hostname
+hostname bchip052
 
-0:rx_udpport 50004
-0:rx_udpip 172.24.8.84
-0:detectorip 172.24.8.254
-rx_hostname localhost
+# 1Gb receiver pc hostname (default tcpport: 1954)
+rx_hostname pcmoench01
 
-#powerchip 1
-#highvoltage 200
+# udp destination port (receiver)
+udp_dstport 50004
 
-#extsig:0 trigger_in_rising_edge
-#timing trigger
+# udp destination ip (receiver)
+#udp_dstip 172.24.8.84
+# or to get ip from rx_hostname
+udp_dstip auto 
 
-outdir /tmp/slsdetector
+# udp source ip (same subnet as udp_dstip)
+udp_srcip 172.24.8.254
 
 
+# PCBv2.0 (using 2 interfaces)
+udp_dstport2 50005
+udp_dstip2 auto 
+udp_srcip2 172.24.8.111
+# enable two interfaces
+numinterfaces 2
+# select inner interface(effective only when numinterfaces is 1)
+#selinterface 1
+
+# power on chip
+powerchip 1
+
+# high voltage
+highvoltage 200
+
+# timing to trigger
+timing trigger
+
+# output file directory
+fpath /external_pool/jungfrau_data/softwaretest
+
+# disable file writing
+fwrite 0

examples/jungfrau_two.config

@@ -1,26 +1,49 @@
-detsizechan 1024 1024
+# detector geometry x, y
+detsize 1024 1024
+
+# detector hostname
 hostname bchip048+bchip052+
 
-0:rx_udpport 50004
-0:rx_udpip 10.1.1.100
-0:rx_udpmac F4:52:14:2F:32:00
-0:detectorip 10.1.1.10
-0:detectormac 00:aa:bb:cc:dd:33
+# 1Gb receiver pc hostname  (default tcpport: 1954)
+rx_hostname pcmoench01+pcmoench01:1955
 
-1:rx_tcpport 1955
-1:rx_udpport 50005
-1:rx_udpip 10.1.1.100
-1:rx_udpmac F4:52:14:2F:32:00
-1:detectorip 10.1.1.11
-1:detectormac 00:aa:bb:cc:dd:33
 
-rx_hostname pcmoench01
 
+# udp configurations for 1st module
+# udp destination port (receiver)
+0:udp_dstport 50004
+
+# udp destination ip (receiver)
+0:udp_dstip 10.1.1.100
+
+# udp source ip (same subnet as 0:udp_dstip)
+0:udp_srcip 10.1.1.10
+
+
+
+# udp configurations for 2nd module
+# udp destination port (receiver)
+1:udp_dstport 50005
+
+# udp destination ip (receiver)
+1:udp_dstip 10.1.1.100
+
+# udp source ip (same subnet as 1:udp_dstip)
+1:udp_srcip 10.1.1.11
+
+
+
+# power on chip
 powerchip 1
+
+# high voltage
 highvoltage 200
-#extsig:0 trigger_in_rising_edge
-#timing trigger
 
-outdir /external_pool/jungfrau_data/softwaretest
+# timing to trigger
+timing trigger
 
+# output file directory
+fpath /external_pool/jungfrau_data/softwaretest
 
+# disable file writing
+fwrite 0

examples/measurement_setup.det

@@ -0,0 +1,32 @@
+# file name prefix
+fname measurement1
+
+# file acquisition index
+findex 3000
+
+# dynamic range (only for Mythen3 and Eiger)
+dr 32
+
+# settings 
+settings veryhighgain
+
+# exposure time
+exptime 100us
+
+# period
+period 2ms
+
+# frames per trigger
+frames 30000
+
+# timing mode
+timing trigger
+
+# triggers
+triggers 10
+
+# delay after trigger
+delay 1ms
+
+
+

examples/moench03_T1.config

@@ -9,7 +9,6 @@ hostname bchip181+
 ############################################
 rx_hostname mpc2011
 
-rx_tcpport 1954
 #############################################
 ### edit with 10 Gbs IP of your server
 ############################################
@@ -33,7 +32,6 @@ zmqport 50001
 
 
 
-
 tengiga 1
 rx_zmqstream 1
 
@@ -41,12 +39,13 @@ rx_zmqstream 1
 
 frames 100000
 period 0.0006
+
 #############################################
 ### edit with directory you want to write to
 ############################################
 fpath /mnt/moench_data/scratch/
+
 fwrite 0
-rx_zmqstream 1
 
 rx_jsonpara frameMode frame
 rx_jsonpara detectorMode counting

examples/two_gotthard.config

@@ -1,55 +0,0 @@
-#####Any line with a # is not read######
-
-detsizechan 2560 1
-
-hostname bchip007+bchip009+
-
-#0:hostname bchip007
-#0:port 1952
-#0:stopport 1953
-#0:rx_tcpport 1956 
-0:angdir 1.000000
-0:moveflag 0.000000
-0:ffdir /home/l_msdetect
-0:extsig:0 off
-
-0:detectorip 10.1.1.2
-#0:detectormac 00:aa:bb:cc:dd:ee
-#0:rx_udpport 50001
-0:rx_udpip 10.1.1.1
-0:rx_hostname 129.129.202.134 
-0:outdir /data/speedt
-0:highvoltage 120
-
-
-#1:hostname bchip009
-#1:port 1952
-#1:stopport 1953
-1:rx_tcpport 1957
-1:angdir 1.000000
-1:moveflag 0.000000
-1:ffdir /home/l_msdetect
-1:extsig:0 off
-
-1:detectorip 10.1.2.2
-#1:detectormac 00:aa:bb:cc:dd:ee
-1:rx_udpport 50004
-1:rx_udpip 10.1.2.1
-1:rx_hostname 129.129.202.134 
-1:outdir /data/speedt
-1:highvoltage 120
-
-
-master -1
-sync none
-outdir /data/speedt
-ffdir /home/l_msdetect
-headerbefore none
-headerafter none
-headerbeforepar none
-headerafterpar none
-badchannels none
-angconv none
-globaloff 0.000000
-binsize 0.001000
-

examples/virtual_ctb_moench.config

@@ -0,0 +1,477 @@
+# detector hostname
+hostname localhost:1910
+
+# receiver hostname
+rx_hostname mpc1922:2010
+
+# udp destination ports
+udp_dstport 50010
+
+# udp destination ip from rx_hostname
+udp_dstip auto
+
+# udp source ip (same subnet as udp_dstip)
+udp_srcip 192.168.1.100
+
+# output file directory
+fpath /tmp
+
+# disable file writing
+fwrite 0
+
+
+# default clocks
+runclk 40
+adcclk 20
+dbitclk 40
+
+
+# patterns
+patword 0x0000 0x0000000000000000
+patword 0x0001 0x0000000000000000
+patword 0x0002 0x0008000900080000
+patword 0x0003 0x0008000900080000
+patword 0x0004 0x0008000900080000
+patword 0x0005 0x0008000900080000
+patword 0x0006 0x0008000900080000
+patword 0x0007 0x0008000900080000
+patword 0x0008 0x0008000900080000
+patword 0x0009 0x0008000900080000
+patword 0x000a 0x0008000900080000
+patword 0x000b 0x0008000900080000
+patword 0x000c 0x0008000900080000
+patword 0x000d 0x0008000900080000
+patword 0x000e 0x0008000900080000
+patword 0x000f 0x0008000900080000
+patword 0x0010 0x0008000900080000
+patword 0x0011 0x0008000900080000
+patword 0x0012 0x0008000900080000
+patword 0x0013 0x0008000900080000
+patword 0x0014 0x0008000900080000
+patword 0x0015 0x0008000900080000
+patword 0x0016 0x0008400900080020
+patword 0x0017 0x0008400900080020
+patword 0x0018 0x0008599f0418503a
+patword 0x0019 0x0008599f0418503a
+patword 0x001a 0x0108599f0418503a
+patword 0x001b 0x0108599f0418503a
+patword 0x001c 0x0108599f0418503a
+patword 0x001d 0x0108599f0418503a
+patword 0x001e 0x0108599f0418503a
+patword 0x001f 0x0108599f0418503a
+patword 0x0020 0x0108599f0418503a
+patword 0x0021 0x0108599f0418503a
+patword 0x0022 0x0108599f0418503a
+patword 0x0023 0x0108599f0418503a
+patword 0x0024 0x0108599f0418503a
+patword 0x0025 0x0108599f0418503a
+patword 0x0026 0x0108599f0418503a
+patword 0x0027 0x0108599f0418503a
+patword 0x0028 0x0108599f0418503a
+patword 0x0029 0x0108599f0418503a
+patword 0x002a 0x0108599f0418503a
+patword 0x002b 0x0108599f0418503a
+patword 0x002c 0x0108599f0418503a
+patword 0x002d 0x0108599f0418503a
+patword 0x002e 0x0108599f0418503a
+patword 0x002f 0x0108599f0418503a
+patword 0x0030 0x0108599f0418503a
+patword 0x0031 0x0108599f0418503a
+patword 0x0032 0x0108599f0418503a
+patword 0x0033 0x0108599f0418503a
+patword 0x0034 0x0108599f0418503a
+patword 0x0035 0x0108599f0418503a
+patword 0x0036 0x0108599f0418503a
+patword 0x0037 0x0108599f0418503a
+patword 0x0038 0x0108599f0418503a
+patword 0x0039 0x0108599f0418503a
+patword 0x003a 0x0108599f0418503a
+patword 0x003b 0x0108599f0418503a
+patword 0x003c 0x0108599f0418503a
+patword 0x003d 0x0108599f0418503a
+patword 0x003e 0x0108599f0418503a
+patword 0x003f 0x0108599f0418503a
+patword 0x0040 0x0108599f0418503a
+patword 0x0041 0x0108599f0418503a
+patword 0x0042 0x0108599f0418503a
+patword 0x0043 0x0108599f0418503a
+patword 0x0044 0x0108599f0418503a
+patword 0x0045 0x0108599f0418503a
+patword 0x0046 0x0108599f0418503a
+patword 0x0047 0x0108599f0418503a
+patword 0x0048 0x0108599f0418503a
+patword 0x0049 0x0108599f0418503a
+patword 0x004a 0x0108599f0418503a
+patword 0x004b 0x0108599f0418503a
+patword 0x004c 0x0108599f0418503a
+patword 0x004d 0x0108599f0418503a
+patword 0x004e 0x0108599f0418503a
+patword 0x004f 0x0108599f0418503a
+patword 0x0050 0x0108599f0418503a
+patword 0x0051 0x0108599f0418503a
+patword 0x0052 0x0108599f0418503a
+patword 0x0053 0x0108599f0418503a
+patword 0x0054 0x0108599f0418503a
+patword 0x0055 0x0108599f0418503a
+patword 0x0056 0x0108599f0418503a
+patword 0x0057 0x0108599f0418503a
+patword 0x0058 0x0108599f0418503a
+patword 0x0059 0x0108599f0418503a
+patword 0x005a 0x0108599f0418503a
+patword 0x005b 0x0108599f0418503a
+patword 0x005c 0x0108599f0418503a
+patword 0x005d 0x0108599f0418503a
+patword 0x005e 0x0108599f0418503a
+patword 0x005f 0x0108599f0418503a
+patword 0x0060 0x0108599f0418503a
+patword 0x0061 0x0108599f0418503a
+patword 0x0062 0x0108599f0418503a
+patword 0x0063 0x0108599f0418503a
+patword 0x0064 0x0108599f0418503a
+patword 0x0065 0x0108599f0418503a
+patword 0x0066 0x0108599f0418503a
+patword 0x0067 0x0108599f0418503a
+patword 0x0068 0x0108599f0418503a
+patword 0x0069 0x0108599f0418503a
+patword 0x006a 0x0108599f0418503a
+patword 0x006b 0x0108599f0418503a
+patword 0x006c 0x0108599f0418503a
+patword 0x006d 0x0108599f0418503a
+patword 0x006e 0x0108599f0418503a
+patword 0x006f 0x0108599f0418503a
+patword 0x0070 0x0108599f0418503a
+patword 0x0071 0x0108599f0418503a
+patword 0x0072 0x0108599f0418503a
+patword 0x0073 0x0108599f0418503a
+patword 0x0074 0x0108599f0418503a
+patword 0x0075 0x0108599f0418503a
+patword 0x0076 0x0108599f0418503a
+patword 0x0077 0x0108599f0418503a
+patword 0x0078 0x0108599f0418503a
+patword 0x0079 0x0108599f0418503a
+patword 0x007a 0x0108599f0418503a
+patword 0x007b 0x0108599f0418503a
+patword 0x007c 0x0108599f0418503a
+patword 0x007d 0x0108599f0418503a
+patword 0x007e 0x010859960418503a
+patword 0x007f 0x010859960418503a
+patword 0x0080 0x010859960418503a
+patword 0x0081 0x010859960418503a
+patword 0x0082 0x010859960418503a
+patword 0x0083 0x010859960418503a
+patword 0x0084 0x010859960418503a
+patword 0x0085 0x010859960418503a
+patword 0x0086 0x010859960418503a
+patword 0x0087 0x010859960418503a
+patword 0x0088 0x010859960418503a
+patword 0x0089 0x010859960418503a
+patword 0x008a 0x010859960418503a
+patword 0x008b 0x010859960418503a
+patword 0x008c 0x010859960418503a
+patword 0x008d 0x010859960418503a
+patword 0x008e 0x010859960418503a
+patword 0x008f 0x010859960418503a
+patword 0x0090 0x010859960418503a
+patword 0x0091 0x010859960418503a
+patword 0x0092 0x010819960418501a
+patword 0x0093 0x010819960418501a
+patword 0x0094 0x010819960418501a
+patword 0x0095 0x010819960418501a
+patword 0x0096 0x030819960418501a
+patword 0x0097 0x030819960418501a
+patword 0x0098 0x030819960418501a
+patword 0x0099 0x030819960418501a
+patword 0x009a 0x030819960418501a
+patword 0x009b 0x030819960418501a
+patword 0x009c 0x030819960418501a
+patword 0x009d 0x030819960418501a
+patword 0x009e 0x030819960418501a
+patword 0x009f 0x030819960418501a
+patword 0x00a0 0x030819960418501a
+patword 0x00a1 0x030819960418501a
+patword 0x00a2 0x030819960418501a
+patword 0x00a3 0x030819960418501a
+patword 0x00a4 0x030819960418501a
+patword 0x00a5 0x030819960418501a
+patword 0x00a6 0x030819960418501a
+patword 0x00a7 0x030819960418501a
+patword 0x00a8 0x030819960418501a
+patword 0x00a9 0x030819960418501a
+patword 0x00aa 0x030819960418501a
+patword 0x00ab 0x030819960418501a
+patword 0x00ac 0x030819960008501a
+patword 0x00ad 0x030819960008501a
+patword 0x00ae 0x030819960008501a
+patword 0x00af 0x030819960008501a
+patword 0x00b0 0x030819960008501a
+patword 0x00b1 0x030819960008501a
+patword 0x00b2 0x030819960008501a
+patword 0x00b3 0x030819960008501a
+patword 0x00b4 0x030819960008501a
+patword 0x00b5 0x030819960008501a
+patword 0x00b6 0x030819960008501a
+patword 0x00b7 0x030819960008501a
+patword 0x00b8 0x030819960008501a
+patword 0x00b9 0x030819960008501a
+patword 0x00ba 0x030819960008501a
+patword 0x00bb 0x030819960008501a
+patword 0x00bc 0x030819960008501a
+patword 0x00bd 0x030819960008501a
+patword 0x00be 0x030819960008501a
+patword 0x00bf 0x030819960008501a
+patword 0x00c0 0x0308199f0008501a
+patword 0x00c1 0x0308199f0008501a
+patword 0x00c2 0x0308199f0008501a
+patword 0x00c3 0x0308199f0008501a
+patword 0x00c4 0x0308199f0008501a
+patword 0x00c5 0x0308199f0008501a
+patword 0x00c6 0x0308199f0008501a
+patword 0x00c7 0x0308199f0008501a
+patword 0x00c8 0x0308199f0008501a
+patword 0x00c9 0x0308199f0008501a
+patword 0x00ca 0x0308199f0008501a
+patword 0x00cb 0x0308199f0008501a
+patword 0x00cc 0x0308199f0008501a
+patword 0x00cd 0x0308199f0008501a
+patword 0x00ce 0x0308199f0008501a
+patword 0x00cf 0x0308199f0008501a
+patword 0x00d0 0x0308199f0008501a
+patword 0x00d1 0x0308199f0008501a
+patword 0x00d2 0x0308199f0008501a
+patword 0x00d3 0x0308199f0008501a
+patword 0x00d4 0x0308599f0008503a
+patword 0x00d5 0x0308599f0008503a
+patword 0x00d6 0x030c599f000850ba
+patword 0x00d7 0x030c599f000850ba
+patword 0x00d8 0x030c599f000850ba
+patword 0x00d9 0x030c599f000850ba
+patword 0x00da 0x030c599f000850ba
+patword 0x00db 0x030c599f000850ba
+patword 0x00dc 0x030c599f000850ba
+patword 0x00dd 0x030c599f000850ba
+patword 0x00de 0x030c599f000850ba
+patword 0x00df 0x030c599f000850ba
+patword 0x00e0 0x030c599f000850ba
+patword 0x00e1 0x030c599f000850ba
+patword 0x00e2 0x030c599f000850ba
+patword 0x00e3 0x030c599f000850ba
+patword 0x00e4 0x030c599f000850ba
+patword 0x00e5 0x030c599f000850ba
+patword 0x00e6 0x030c599f000850ba
+patword 0x00e7 0x030c599f000850ba
+patword 0x00e8 0x030c599f000850ba
+patword 0x00e9 0x030c599f000850ba
+patword 0x00ea 0x030c799f010858ba
+patword 0x00eb 0x030c799f010858ba
+patword 0x00ec 0x030c599f000850ba
+patword 0x00ed 0x030c599f000850ba
+patword 0x00ee 0x030c599f000850ba
+patword 0x00ef 0x030c599f000850ba
+patword 0x00f0 0x030c599f000850ba
+patword 0x00f1 0x030c599f000850ba
+patword 0x00f2 0x030c599f000850ba
+patword 0x00f3 0x030c599f000850ba
+patword 0x00f4 0x030c599f000850ba
+patword 0x00f5 0x030c599f000850ba
+patword 0x00f6 0x030c599f000850ba
+patword 0x00f7 0x030c599f000850ba
+patword 0x00f8 0x030c599f000850ba
+patword 0x00f9 0x030c599f000850ba
+patword 0x00fa 0x030c599f000850ba
+patword 0x00fb 0x030c599f000850ba
+patword 0x00fc 0x030c599f000850ba
+patword 0x00fd 0x030c599f000850ba
+patword 0x00fe 0x030c599f000850ba
+patword 0x00ff 0x030c599f000850ba
+patword 0x0100 0x030c599f000850ba
+patword 0x0101 0x030c599f000850ba
+patword 0x0102 0x030c599f400850ba
+patword 0x0103 0x030c599f400850ba
+patword 0x0104 0x030c599f600850ba
+patword 0x0105 0x030c599f400850ba
+patword 0x0106 0x030c599f400850ba
+patword 0x0107 0x030c599f400850ba
+patword 0x0108 0x870c599f682e50ba
+patword 0x0109 0x870c599f482850ba
+patword 0x010a 0x870c599f000e50ba
+patword 0x010b 0x870c599f000850ba
+patword 0x010c 0x870c599f000e50ba
+patword 0x010d 0x870c599f000850ba
+patword 0x010e 0x870c599f000e50ba
+patword 0x010f 0x870c599f000850ba
+patword 0x0110 0x870c599f000e50ba
+patword 0x0111 0x870c599f000850ba
+patword 0x0112 0x870c599f000e50ba
+patword 0x0113 0x870c599f000850ba
+patword 0x0114 0x870c599f000e50ba
+patword 0x0115 0x870c599f000850ba
+patword 0x0116 0x870c599f000e50ba
+patword 0x0117 0x870c599f000850ba
+patword 0x0118 0x870c599f000e50ba
+patword 0x0119 0x870c599f000850ba
+patword 0x011a 0x870c599f000e50ba
+patword 0x011b 0x870c599f000850ba
+patword 0x011c 0x870c599f000e50ba
+patword 0x011d 0x870c599f000850ba
+patword 0x011e 0x870c599f000e50ba
+patword 0x011f 0x870c599f000850ba
+patword 0x0120 0x870c599f000e50ba
+patword 0x0121 0x870c599f000850ba
+patword 0x0122 0x870c599f200e50ba
+patword 0x0123 0x870c599f000850ba
+patword 0x0124 0x870c599f000e50ba
+patword 0x0125 0x870c599f000850ba
+patword 0x0126 0x870c599f000e50ba
+patword 0x0127 0x870c599f000850ba
+patword 0x0128 0x870c599f000e50ba
+patword 0x0129 0x870c599f000850ba
+patword 0x012a 0x870c599f000e50ba
+patword 0x012b 0x870c599f000850ba
+patword 0x012c 0x870c599f000e50ba
+patword 0x012d 0x870c599f000850ba
+patword 0x012e 0x870c599f000e50ba
+patword 0x012f 0x870c599f000850ba
+patword 0x0130 0x870c599f000e50ba
+patword 0x0131 0x870c599f000850ba
+patword 0x0132 0x870c599f000e50ba
+patword 0x0133 0x870c599f000850ba
+patword 0x0134 0x870c599f000e50ba
+patword 0x0135 0x870c599f000850ba
+patword 0x0136 0x870c599f000e50ba
+patword 0x0137 0x870c599f000850ba
+patword 0x0138 0x870c599f000e50ba
+patword 0x0139 0x870c599f000850ba
+patword 0x013a 0x870c599f282e50ba
+patword 0x013b 0x870c599f082850ba
+patword 0x013c 0x870c599f000e50ba
+patword 0x013d 0x870c599f000850ba
+patword 0x013e 0x870c599f000e50ba
+patword 0x013f 0x870c599f000850ba
+patword 0x0140 0x870c599f000e50ba
+patword 0x0141 0x870c599f000850ba
+patword 0x0142 0x870c599f000e50ba
+patword 0x0143 0x870c599f000850ba
+patword 0x0144 0x870c599f000e50ba
+patword 0x0145 0x870c599f000850ba
+patword 0x0146 0x870c599f000e50ba
+patword 0x0147 0x870c599f000850ba
+patword 0x0148 0x870c599f000e50ba
+patword 0x0149 0x870c599f000850ba
+patword 0x014a 0x870c599f000e50ba
+patword 0x014b 0x870c599f000850ba
+patword 0x014c 0x870c599f000e50ba
+patword 0x014d 0x870c599f000850ba
+patword 0x014e 0x870c599f000e50ba
+patword 0x014f 0x870c599f000850ba
+patword 0x0150 0x870c599f000e50ba
+patword 0x0151 0x870c599f000850ba
+patword 0x0152 0x870c599f000e50ba
+patword 0x0153 0x870c599f000850ba
+patword 0x0154 0x870c599f200e50ba
+patword 0x0155 0x870c599f000850ba
+patword 0x0156 0x870c599f000e50ba
+patword 0x0157 0x870c599f000850ba
+patword 0x0158 0x870c599f000e50ba
+patword 0x0159 0x870c599f000850ba
+patword 0x015a 0x870c599f000e50ba
+patword 0x015b 0x870c599f000850ba
+patword 0x015c 0x870c599f000e50ba
+patword 0x015d 0x870c599f000850ba
+patword 0x015e 0x870c599f000e50ba
+patword 0x015f 0x870c599f000850ba
+patword 0x0160 0x870c599f000e50ba
+patword 0x0161 0x870c599f000850ba
+patword 0x0162 0x870c599f000e50ba
+patword 0x0163 0x870c599f000850ba
+patword 0x0164 0x870c599f000e50ba
+patword 0x0165 0x870c599f000850ba
+patword 0x0166 0x870c599f000e50ba
+patword 0x0167 0x870c599f000850ba
+patword 0x0168 0x870c599f000e50ba
+patword 0x0169 0x870c599f000850ba
+patword 0x016a 0x870c599f000e50ba
+patword 0x016b 0x870c599f000850ba
+patword 0x016c 0x070c599f000850ba
+patword 0x016d 0x070c599f000850ba
+patword 0x016e 0x000c599f000850ba
+patword 0x016f 0x000c599f000850ba
+patword 0x0170 0x0008599f200e503a
+patword 0x0171 0x0008599f0008503a
+patword 0x0172 0x0008599f200e503a
+patword 0x0173 0x0008599f0008503a
+patword 0x0174 0x0008599f0008503a
+patword 0x0175 0x0008599f0008503a
+patword 0x0176 0x0008599f0008503a
+patword 0x0177 0x0008599f0008503a
+patword 0x0178 0x0008599f0008503a
+patword 0x0179 0x0008599f0008503a
+patword 0x017a 0x0008599f0008503a
+patword 0x017b 0x0008599f0008503a
+patword 0x017c 0x0008599f0008503a
+patword 0x017d 0x0008599f0008503a
+patword 0x017e 0x0008599f0008503a
+patword 0x017f 0x0008599f0008503a
+patword 0x0180 0x0008599f0008503a
+patword 0x0181 0x0008599f0008503a
+patword 0x0182 0x0008599f0008503a
+patword 0x0183 0x0008599f0008503a
+patword 0x0184 0x0008599f0008503a
+patword 0x0185 0x0008599f0008503a
+patword 0x0186 0x0008599f0008503a
+patword 0x0187 0x0008599f0008503a
+patword 0x0188 0x0008599f0008503a
+patword 0x0189 0x0008599f0008503a
+patword 0x018a 0x0008599f0008503a
+patword 0x018b 0x0008599f0008503a
+patword 0x018c 0x0008599f0008503a
+patword 0x018d 0x0008599f0008503a
+patioctrl 0x8f0effff6dbffdbf
+patlimits 0x0000 0x018c
+patloop0 0x013a 0x016b
+patnloop0 0x199
+patloop1 0x0400 0x0400
+patnloop1 0
+patloop2 0x0400 0x0400
+patnloop2 0
+patwait0 0x00aa
+patwaittime0 10000
+patwait1 0x0400
+patwaittime1 0
+patwait2 0x0400
+patwaittime2 0
+
+# dacs
+dac 6 800
+dac 0 1300
+dac 4 1428
+dac 1 1000
+dac 7 900
+dac 3 680
+dac 2 1400
+dac 5 1200
+
+
+adcinvert 4a342593
+
+# analog samples
+asamples 5000
+
+# digital samples
+dsamples 0
+
+# adc phase
+adcphase 30 deg
+
+# adc pipeline
+adcpipeline 14
+
+# analog readout
+romode analog
+
+# frames
+frames 1
+
+# period
+period 1ms
+
+

examples/virtual_eiger_1_half_module.config

@@ -0,0 +1,22 @@
+# detector hostname
+hostname localhost:1900
+
+# receiver hostname
+rx_hostname mpc1922:2000
+
+# udp destination ports
+udp_dstport 50000
+udp_dstport2 50001
+
+# udp destination ip from rx_hostname
+udp_dstip auto
+
+# output file directory
+fpath /tmp
+
+# disable file writing
+fwrite 0
+
+#imagetest 1
+
+

examples/virtual_eiger_2_half_modules.config

@@ -0,0 +1,23 @@
+# detector hostname
+hostname localhost:1900+localhost:1902+
+
+# receiver hostname
+rx_hostname mpc1922:2000+mpc1922:2001+
+
+# udp destination ports
+0:udp_dstport 50000
+0:udp_dstport2 50001
+1:udp_dstport 50002
+1:udp_dstport2 50003
+
+# udp destination ip from rx_hostname
+udp_dstip auto
+
+# output file directory
+fpath /tmp
+
+# disable file writing
+fwrite 0
+
+#imagetest 1
+

examples/virtual_gotthard.config

@@ -0,0 +1,23 @@
+# detector hostname
+hostname localhost:1904
+
+# receiver hostname
+rx_hostname mpc1922:2004
+
+# udp destination ports
+udp_dstport 50004
+
+# udp destination ip from rx_hostname
+udp_dstip auto
+
+# udp source ip (same subnet as udp_dstip)
+udp_srcip 192.168.1.100
+
+# output file directory
+fpath /tmp
+
+# disable file writing
+fwrite 0
+
+
+

examples/virtual_gotthard2.config

@@ -0,0 +1,37 @@
+# detector hostname
+hostname localhost:1914
+
+# receiver hostname
+rx_hostname mpc1922:2014
+
+# udp destination ports
+udp_dstport 50014
+
+# udp destination ip from rx_hostname
+udp_dstip auto
+
+# udp source ip (same subnet as udp_dstip)
+udp_srcip 192.168.1.100
+
+# output file directory
+fpath /tmp
+
+# disable file writing
+fwrite 0
+
+# enable 2nd interface for veto debugging
+# udp destination port for veto
+udp_dstport2 50015
+# udp destination ip (from rx_hostname)
+udp_dstip2 auto
+# udp source ip (same subnet as udp_dstip)
+udp_srcip2 192.168.1.100
+
+# to enable 2nd interface for veto debugging
+numinterfaces 2
+
+# enable veto data streaming
+veto 1
+
+
+

examples/virtual_jungfrau.config

@@ -0,0 +1,32 @@
+# detector hostname
+hostname localhost:1906
+
+# receiver hostname
+rx_hostname mpc1922:2006
+
+# udp destination ports
+udp_dstport 50006
+udp_dstport2 50007
+
+# udp destination ip from rx_hostname
+udp_dstip auto
+udp_dstip2 auto
+
+# udp source ip (same subnet as udp_dstip)
+udp_srcip 192.168.1.100
+udp_srcip2 192.168.1.100
+
+# output file directory
+fpath /tmp
+
+# disable file writing
+fwrite 0
+
+#imagetest 1
+#frames 1
+
+# enable two interfaces
+numinterfaces 2
+
+# select inner interface(effective only when numinterfaces is 1)
+#selinterface 1

examples/virtual_jungfrau_4.config

@@ -0,0 +1,47 @@
+# detector geometry
+detsize 2048 1024
+
+# detector hostname
+virtual 4 1952
+
+# receiver hostname and tcpports
+0:rx_tcpport 1970
+1:rx_tcpport 1971
+2:rx_tcpport 1972
+3:rx_tcpport 1973
+rx_hostname mpc1922
+
+# udp destination ports
+0:udp_dstport2 50001
+0:udp_dstport2 50002
+1:udp_dstport 50003
+1:udp_dstport2 50004
+2:udp_dstport 50005
+2:udp_dstport2 50006
+3:udp_dstport 50007
+3:udp_dstport2 50008
+
+# udp destination ip from rx_hostname
+udp_dstip auto
+udp_dstip2 auto
+
+# udp source ip (same subnet as udp_dstip)
+udp_srcip 192.168.1.100
+udp_srcip2 192.168.1.100
+
+# transmission delay frame
+0:txndelay_frame 0
+1:txndelay_frame 1
+2:txndelay_frame 2
+3:txndelay_frame 3
+
+# output file directory
+fpath /tmp
+
+# disable file writing
+fwrite 0
+
+#imagetest 1
+#frames 1
+
+

examples/virtual_moench.config

@@ -0,0 +1,21 @@
+# detector hostname
+hostname localhost:1908
+
+# receiver hostname
+rx_hostname mpc1922:2008
+
+# udp destination ports
+udp_dstport 50008
+
+# udp destination ip from rx_hostname
+udp_dstip auto
+
+# udp source ip (same subnet as udp_dstip)
+udp_srcip 192.168.1.100
+
+# output file directory
+fpath /tmp
+
+# disable file writing
+fwrite 0
+

examples/virtual_mythen3.config

@@ -0,0 +1,24 @@
+# detector hostname
+hostname localhost:1912
+
+# receiver hostname
+rx_hostname mpc1922:2012
+
+# udp destination ports
+udp_dstport 50012
+
+# udp destination ip from rx_hostname
+udp_dstip auto
+
+# udp source ip (same subnet as udp_dstip)
+udp_srcip 192.168.1.100
+
+# output file directory
+fpath /tmp
+
+# disable file writing
+fwrite 0
+
+# load ascii pattern file
+#pattern ../pat.txt
+

serverBin/ctbDetectorServer_developer

@@ -0,0 +1 @@
+../slsDetectorServers/ctbDetectorServer/bin/ctbDetectorServer_developer

serverBin/eigerDetectorServer_developer

@@ -0,0 +1 @@
+../slsDetectorServers/eigerDetectorServer/bin/eigerDetectorServer_developer

serverBin/eigerDetectorServerv4.0.0.22.0

@@ -1 +0,0 @@
-../slsDetectorSoftware/eigerDetectorServer/bin/eigerDetectorServerv4.0.0.22.0

serverBin/gotthard2DetectorServer_developer

@@ -0,0 +1 @@
+../slsDetectorServers/gotthard2DetectorServer/bin/gotthard2DetectorServer_developer

serverBin/gotthardDetectorServer_developer

@@ -0,0 +1 @@
+../slsDetectorServers/gotthardDetectorServer/bin/gotthardDetectorServer_developer

serverBin/gotthardDetectorServerv4.0.0.3

@@ -1 +0,0 @@
-../slsDetectorSoftware/gotthardDetectorServer/gotthardDetectorServerv4.0.0.3

serverBin/jungfrauDetectorServer_developer

@@ -0,0 +1 @@
+../slsDetectorServers/jungfrauDetectorServer/bin/jungfrauDetectorServer_developer

serverBin/jungfrauDetectorServerv4.0.0.0

@@ -1 +0,0 @@
-../slsDetectorSoftware/jungfrauDetectorServer/bin/jungfrauDetectorServerv4.0.0.0

serverBin/moenchDetectorServer_developer

@@ -0,0 +1 @@
+../slsDetectorServers/moenchDetectorServer/bin/moenchDetectorServer_developer

serverBin/mythen3DetectorServer_developer

@@ -0,0 +1 @@
+../slsDetectorServers/mythen3DetectorServer/bin/mythen3DetectorServer_developer

serverBin/mythenDetectorServerv2.0.3

@@ -1 +0,0 @@
-../slsDetectorSoftware/mythenDetectorServer/mythenDetectorServerv2.0.3

slsDetectorGui/forms/form_tab_plot.ui

@@ -2191,7 +2191,7 @@ Displays minimum, maximum and sum of values for each plot.
              <double>999999.000000000000000</double>
             </property>
             <property name="value">
-             <double>200.000000000000000</double>
+             <double>500.000000000000000</double>
             </property>
            </widget>
           </item>

slsDetectorGui/include/qDetectorMain.h

@@ -71,7 +71,7 @@ class qDetectorMain : public QMainWindow, private Ui::DetectorMainObject {
     std::unique_ptr<sls::Detector> det;
     qDrawPlot *plot;
     MyTabWidget *tabs;
-    std::unique_ptr<QScrollArea> scroll[NumberOfTabs];
+    QScrollArea *scroll[NumberOfTabs];
     qTabMeasurement *tabMeasurement;
     qTabDataOutput *tabDataOutput;
     qTabPlot *tabPlot;

slsDetectorGui/src/qDetectorMain.cpp

@@ -116,6 +116,9 @@ qDetectorMain::qDetectorMain(int multiId, const std::string &fname,
 
 qDetectorMain::~qDetectorMain() {
     disconnect(tabs, SIGNAL(currentChanged(int)), this, SLOT(Refresh(int)));
+    for (int i = 0; i < NumberOfTabs; ++i) {
+        delete scroll[i];
+    }
 }
 
 void qDetectorMain::SetUpWidgetWindow() {
@@ -141,7 +144,7 @@ void qDetectorMain::SetUpWidgetWindow() {
 
     //	creating the scroll area widgets for the tabs
     for (int i = 0; i < NumberOfTabs; ++i) {
-        scroll[i] = sls::make_unique<QScrollArea>();
+        scroll[i] = new QScrollArea();
         scroll[i]->setFrameShape(QFrame::NoFrame);
     }
     // setting the tab widgets to the scrollareas
@@ -153,13 +156,13 @@ void qDetectorMain::SetUpWidgetWindow() {
     scroll[DEBUGGING]->setWidget(tabDebugging);
     scroll[DEVELOPER]->setWidget(tabDeveloper);
     // inserting all the tabs
-    tabs->insertTab(MEASUREMENT, scroll[MEASUREMENT].get(), "Measurement");
-    tabs->insertTab(DATAOUTPUT, scroll[DATAOUTPUT].get(), "Data Output");
-    tabs->insertTab(PLOT, scroll[PLOT].get(), "Plot");
-    tabs->insertTab(SETTINGS, scroll[SETTINGS].get(), "Settings");
-    tabs->insertTab(ADVANCED, scroll[ADVANCED].get(), "Advanced");
-    tabs->insertTab(DEBUGGING, scroll[DEBUGGING].get(), "Debugging");
-    tabs->insertTab(DEVELOPER, scroll[DEVELOPER].get(), "Developer");
+    tabs->insertTab(MEASUREMENT, scroll[MEASUREMENT], "Measurement");
+    tabs->insertTab(DATAOUTPUT, scroll[DATAOUTPUT], "Data Output");
+    tabs->insertTab(PLOT, scroll[PLOT], "Plot");
+    tabs->insertTab(SETTINGS, scroll[SETTINGS], "Settings");
+    tabs->insertTab(ADVANCED, scroll[ADVANCED], "Advanced");
+    tabs->insertTab(DEBUGGING, scroll[DEBUGGING], "Debugging");
+    tabs->insertTab(DEVELOPER, scroll[DEVELOPER], "Developer");
     // no scroll buttons this way
     tabs->insertTab(MESSAGES, tabMessages, "Terminal");
 

slsDetectorGui/src/qTabPlot.cpp

@@ -75,6 +75,12 @@ void qTabPlot::SetupWidgetWindow() {
     Select1DPlot(is1d);
     Initialization();
     Refresh();
+
+    // set default timer
+    spinTimeGap->setValue(DEFAULT_STREAMING_TIMER_IN_MS);
+    // set to streaming timer
+    stackedTimeInterval->setCurrentIndex(0);
+    comboFrequency->setCurrentIndex(0);
 }
 
 void qTabPlot::Initialization() {
@@ -685,6 +691,9 @@ void qTabPlot::SetStreamingFrequency() {
             LOG(logINFO) << "Setting Streaming Frequency to " << freqVal;
             det->setRxZmqFrequency(freqVal);
         } else {
+            LOG(logINFO) << "Setting Streaming Frequency to " << 0
+                         << " (timer)";
+            det->setRxZmqFrequency(0);
             LOG(logINFO) << "Setting Streaming Timer to " << timeVal << " "
                          << qDefs::getUnitString(timeUnit);
             auto timeMS = qDefs::getMSTime(std::make_pair(timeVal, timeUnit));

slsDetectorServers/ctbDetectorServer/slsDetectorFunctionList.c

@@ -164,10 +164,10 @@ void basictests() {
     // check for API compatibility - old server
     if (sw_fw_apiversion > REQRD_FRMWR_VRSN) {
         sprintf(initErrorMessage,
-                "This detector software software version (0x%llx) is "
-                "incompatible.\n"
-                "Please update detector software (min. 0x%llx) to be "
-                "compatible with this firmware.\n",
+                "This firmware-software api version (0x%llx) is incompatible "
+                "with the software's minimum required firmware version "
+                "(0x%llx).\nPlease update detector software to be compatible "
+                "with this firmware.\n",
                 (long long int)sw_fw_apiversion,
                 (long long int)REQRD_FRMWR_VRSN);
         LOG(logERROR, (initErrorMessage));

slsDetectorServers/eigerDetectorServer/slsDetectorFunctionList.c

@@ -156,13 +156,13 @@ void basictests() {
 
     // check for API compatibility - old server
     if (sw_fw_apiversion > REQUIRED_FIRMWARE_VERSION) {
-        sprintf(
-            initErrorMessage,
-            "This detector software software version (%lld) is incompatible.\n"
-            "Please update detector software (min. %lld) to be compatible with "
-            "this firmware.\n",
-            (long long int)sw_fw_apiversion,
-            (long long int)REQUIRED_FIRMWARE_VERSION);
+        sprintf(initErrorMessage,
+                "This firmware-software api version (0x%llx) is incompatible "
+                "with the software's minimum required firmware version "
+                "(0x%llx).\nPlease update detector software to be compatible "
+                "with this firmware.\n",
+                (long long int)sw_fw_apiversion,
+                (long long int)REQUIRED_FIRMWARE_VERSION);
         LOG(logERROR, (initErrorMessage));
         initError = FAIL;
         return;

slsDetectorServers/gotthard2DetectorServer/slsDetectorFunctionList.c

@@ -152,10 +152,10 @@ void basictests() {
     // check for API compatibility - old server
     if (sw_fw_apiversion > requiredFirmwareVersion) {
         sprintf(initErrorMessage,
-                "This detector software software version (0x%llx) is "
-                "incompatible.\n"
-                "Please update detector software (min. 0x%llx) to be "
-                "compatible with this firmware.\n",
+                "This firmware-software api version (0x%llx) is incompatible "
+                "with the software's minimum required firmware version "
+                "(0x%llx).\nPlease update detector software to be compatible "
+                "with this firmware.\n",
                 (long long int)sw_fw_apiversion,
                 (long long int)requiredFirmwareVersion);
         LOG(logERROR, (initErrorMessage));

slsDetectorServers/gotthard2DetectorServer/slsDetectorServer_defs.h

@@ -1,7 +1,7 @@
 #pragma once
 #include "sls_detector_defs.h"
 
-#define REQRD_FRMWRE_VRSN (0x200707)
+#define REQRD_FRMWRE_VRSN (0x200925)
 #define KERNEL_DATE_VRSN  "Wed May 20 13:58:38 CEST 2020"
 
 #define CTRL_SRVR_INIT_TIME_US (300 * 1000)

slsDetectorServers/jungfrauDetectorServer/slsDetectorFunctionList.c

@@ -138,10 +138,10 @@ void basictests() {
     // check for API compatibility - old server
     if (sw_fw_apiversion > requiredFirmwareVersion) {
         sprintf(initErrorMessage,
-                "This detector software software version (0x%llx) is "
-                "incompatible.\n"
-                "Please update detector software (min. 0x%llx) to be "
-                "compatible with this firmware.\n",
+                "This firmware-software api version (0x%llx) is incompatible "
+                "with the software's minimum required firmware version "
+                "(0x%llx).\nPlease update detector software to be compatible "
+                "with this firmware.\n",
                 (long long int)sw_fw_apiversion,
                 (long long int)requiredFirmwareVersion);
         LOG(logERROR, (initErrorMessage));

slsDetectorServers/moenchDetectorServer/slsDetectorFunctionList.c

@@ -160,10 +160,10 @@ void basictests() {
     // check for API compatibility - old server
     if (sw_fw_apiversion > REQRD_FRMWR_VRSN) {
         sprintf(initErrorMessage,
-                "This detector software software version (0x%llx) is "
-                "incompatible.\n"
-                "Please update detector software (min. 0x%llx) to be "
-                "compatible with this firmware.\n",
+                "This firmware-software api version (0x%llx) is incompatible "
+                "with the software's minimum required firmware version "
+                "(0x%llx).\nPlease update detector software to be compatible "
+                "with this firmware.\n",
                 (long long int)sw_fw_apiversion,
                 (long long int)REQRD_FRMWR_VRSN);
         LOG(logERROR, (initErrorMessage));

slsDetectorServers/mythen3DetectorServer/slsDetectorFunctionList.c

@@ -136,10 +136,10 @@ void basictests() {
     // check for API compatibility - old server
     if (sw_fw_apiversion > requiredFirmwareVersion) {
         sprintf(initErrorMessage,
-                "This detector software software version (0x%llx) is "
-                "incompatible.\n"
-                "Please update detector software (min. 0x%llx) to be "
-                "compatible with this firmware.\n",
+                "This firmware-software api version (0x%llx) is incompatible "
+                "with the software's minimum required firmware version "
+                "(0x%llx).\nPlease update detector software to be compatible "
+                "with this firmware.\n",
                 (long long int)sw_fw_apiversion,
                 (long long int)requiredFirmwareVersion);
         LOG(logERROR, (initErrorMessage));
@@ -439,6 +439,9 @@ void setupDetector() {
     setInitialExtSignals();
     // 10G UDP
     enableTenGigabitEthernet(1);
+#ifdef VIRTUAL
+    enableTenGigabitEthernet(0);
+#endif
 
     // check module type attached if not in debug mode
     {
@@ -1592,7 +1595,14 @@ int enableTenGigabitEthernet(int val) {
         else {
             bus_w(addr, bus_r(addr) & (~PKT_CONFIG_1G_INTERFACE_MSK));
         }
-        updatePacketizing();
+        // stop server does not know dr in virtual mode
+#ifdef VIRTUAL
+        if (isControlServer) {
+#endif
+            updatePacketizing();
+#ifdef VIRTUAL
+        }
+#endif
     }
     int oneG = ((bus_r(addr) & PKT_CONFIG_1G_INTERFACE_MSK) >>
                 PKT_CONFIG_1G_INTERFACE_OFST);

slsDetectorServers/mythen3DetectorServer/slsDetectorServer_defs.h

@@ -1,7 +1,7 @@
 #pragma once
 #include "sls_detector_defs.h"
 
-#define REQRD_FRMWRE_VRSN 0x190000
+#define REQRD_FRMWRE_VRSN (0x200925)
 #define KERNEL_DATE_VRSN  "Wed May 20 13:58:38 CEST 2020"
 
 #define CTRL_SRVR_INIT_TIME_US (300 * 1000)

slsDetectorServers/slsDetectorServer/src/slsDetectorServer.c

@@ -61,7 +61,8 @@ int main(int argc, char *argv[]) {
         "\t-d, --devel              : Developer mode. Skips firmware checks. \n"
         "\t-u, --update             : Update mode. Skips firmware checks and "
         "initial detector setup. \n"
-        "\t-s, --stopserver         : Stop server. Do not use as created by "
+        "\t-s, --stopserver         : Stop server. Do not use as it is created "
+        "by "
         "control server \n\n",
         argv[0]);
 
@@ -109,7 +110,7 @@ int main(int argc, char *argv[]) {
 #elif GOTTHARD2D
             version = APIGOTTHARD2;
 #endif
-            LOG(logINFOBLUE, ("SLS Detector Server Version: %s (0x%x)\n",
+            LOG(logINFO, ("SLS Detector Server Version: %s (0x%x)\n",
                               GITBRANCH, version));
             exit(EXIT_SUCCESS);
 

slsDetectorSoftware/include/Detector.h

@@ -826,7 +826,7 @@ class Detector {
     /** Frequency of frames streamed out from receiver via zmq. \n Default: 1,
      * Means every frame is streamed out. \n If 2, every second frame is
      * streamed out. \n If 0, streaming timer is the timeout, after which
-     * current frame is sent out. (default timeout is 200 ms). Usually used for
+     * current frame is sent out. (default timeout is 500 ms). Usually used for
      * gui purposes.
      */
     void setRxZmqFrequency(int freq, Positions pos = {});
@@ -835,7 +835,7 @@ class Detector {
 
     /**
      * If receiver streaming frequency is 0 (default), then this timer between
-     * each data stream is set. Default is 200 ms.
+     * each data stream is set. Default is 500 ms.
      */
     void setRxZmqTimer(int time_in_ms, Positions pos = {});
 

slsDetectorSoftware/src/CmdProxy.h

@@ -1650,7 +1650,7 @@ class CmdProxy {
         "zmq\n\tDefault: 1, Means every frame is streamed out. \n\tIf 2, every "
         "second frame is streamed out. \n\tIf 0, streaming timer is the "
         "timeout, after which current frame is sent out. (default timeout is "
-        "200 ms). Usually used for gui purposes.");
+        "500 ms). Usually used for gui purposes.");
 
     INTEGER_COMMAND_VEC_ID(
         rx_zmqstartfnum, getRxZmqStartingFrame, setRxZmqStartingFrame,

slsDetectorSoftware/src/DetectorImpl.cpp

@@ -465,8 +465,8 @@ void DetectorImpl::readFrameFromReceiver() {
     }
     bool data = false;
     bool completeImage = false;
-    char *image = nullptr;
-    char *multiframe = nullptr;
+    std::unique_ptr<char[]> image{nullptr};
+    std::unique_ptr<char[]> multiframe{nullptr};
     char *multigappixels = nullptr;
     int multisize = 0;
     // only first message header
@@ -484,9 +484,10 @@ void DetectorImpl::readFrameFromReceiver() {
         // reset data
         data = false;
         if (multiframe != nullptr) {
-            memset(multiframe, 0xFF, multisize);
+            memset(multiframe.get(), 0xFF, multisize);
         }
-        completeImage = true;
+
+        completeImage = (numRunning == (int)zmqSocket.size());
 
         // get each frame
         for (unsigned int isocket = 0; isocket < zmqSocket.size(); ++isocket) {
@@ -503,6 +504,7 @@ void DetectorImpl::readFrameFromReceiver() {
                         // parse error, version error or end of acquisition for
                         // socket
                         runningList[isocket] = false;
+                        completeImage = false;
                         --numRunning;
                         continue;
                     }
@@ -512,9 +514,9 @@ void DetectorImpl::readFrameFromReceiver() {
                         // allocate
                         size = zHeader.imageSize;
                         multisize = size * zmqSocket.size();
-                        image = new char[size];
-                        multiframe = new char[multisize];
-                        memset(multiframe, 0xFF, multisize);
+                        image = sls::make_unique<char[]>(size);
+                        multiframe = sls::make_unique<char[]>(multisize);
+                        memset(multiframe.get(), 0xFF, multisize);
                         // dynamic range
                         dynamicRange = zHeader.dynamicRange;
                         bytesPerPixel = (float)dynamicRange / 8;
@@ -576,7 +578,7 @@ void DetectorImpl::readFrameFromReceiver() {
 
                 // DATA
                 data = true;
-                zmqSocket[isocket]->ReceiveData(isocket, image, size);
+                zmqSocket[isocket]->ReceiveData(isocket, image.get(), size);
 
                 // creating multi image
                 {
@@ -596,18 +598,18 @@ void DetectorImpl::readFrameFromReceiver() {
 
                     if (eiger && (flippedDataX != 0U)) {
                         for (uint32_t i = 0; i < nPixelsY; ++i) {
-                            memcpy((multiframe) +
+                            memcpy((multiframe.get()) +
                                        ((yoffset + (nPixelsY - 1 - i)) *
                                         rowoffset) +
                                        xoffset,
-                                   image + (i * singledetrowoffset),
+                                   image.get() + (i * singledetrowoffset),
                                    singledetrowoffset);
                         }
                     } else {
                         for (uint32_t i = 0; i < nPixelsY; ++i) {
-                            memcpy((multiframe) + ((yoffset + i) * rowoffset) +
-                                       xoffset,
-                                   image + (i * singledetrowoffset),
+                            memcpy((multiframe.get()) +
+                                       ((yoffset + i) * rowoffset) + xoffset,
+                                   image.get() + (i * singledetrowoffset),
                                    singledetrowoffset);
                         }
                     }
@@ -623,12 +625,13 @@ void DetectorImpl::readFrameFromReceiver() {
 
         // send data to callback
         if (data) {
-            char *callbackImage = multiframe;
+            char *callbackImage = multiframe.get();
             int imagesize = multisize;
 
             if (gapPixels) {
-                int n = InsertGapPixels(multiframe, multigappixels, quadEnable,
-                                        dynamicRange, nDetPixelsX, nDetPixelsY);
+                int n = InsertGapPixels(multiframe.get(), multigappixels,
+                                        quadEnable, dynamicRange, nDetPixelsX,
+                                        nDetPixelsY);
                 callbackImage = multigappixels;
                 imagesize = n;
             }
@@ -659,8 +662,6 @@ void DetectorImpl::readFrameFromReceiver() {
     }
 
     // free resources
-    delete[] image;
-    delete[] multiframe;
     delete[] multigappixels;
 }
 

slsDetectorSoftware/src/Module.cpp

@@ -411,13 +411,20 @@ void Module::stopAcquisition() {
     // get status before stopping acquisition
     runStatus s = ERROR, r = ERROR;
     bool zmqstreaming = false;
-    if (shm()->useReceiverFlag && getReceiverStreaming()) {
-        zmqstreaming = true;
-        s = getRunStatus();
-        r = getReceiverStatus();
+    try {
+        if (shm()->useReceiverFlag && getReceiverStreaming()) {
+            zmqstreaming = true;
+            s = getRunStatus();
+            r = getReceiverStatus();
+        }
+    } catch (...) {
+        // if receiver crashed, stop detector in any case
+        zmqstreaming = false;
     }
+
     sendToDetectorStop(F_STOP_ACQUISITION);
     shm()->stoppedFlag = true;
+
     // if rxr streaming and acquisition finished, restream dummy stop packet
     if (zmqstreaming && (s == IDLE) && (r == IDLE)) {
         restreamStopFromReceiver();

slsReceiverSoftware/src/receiver_defs.h

@@ -22,9 +22,6 @@
 #define MYTHEN3_MAX_FRAMES_PER_FILE   10000
 #define GOTTHARD2_MAX_FRAMES_PER_FILE 20000
 
-#define DO_NOTHING    (0)
-#define DO_EVERYTHING (1)
-
 #define STATISTIC_FRAMENUMBER_INFINITE (20000)
 
 // binary

slsSupportLib/include/sls_detector_defs.h

@@ -64,7 +64,7 @@
 
 #define MAX_PATTERN_LENGTH 0x2000
 
-#define DEFAULT_STREAMING_TIMER_IN_MS 200
+#define DEFAULT_STREAMING_TIMER_IN_MS 500
 
 #define NUM_RX_THREAD_IDS 8
 

slsSupportLib/include/versionAPI.h

@@ -1,12 +1,12 @@
 /** API versions */
-#define GITBRANCH   "developer"
-#define APILIB      0x200810
-#define APIRECEIVER 0x200810
-#define APIGUI      0x200804
-#define APICTB       0x200910
-#define APIMOENCH    0x200910
-#define APIMYTHEN3 0x200923
-#define APIGOTTHARD  0x200917
-#define APIJUNGFRAU  0x200917
-#define APIEIGER     0x200918
-#define APIGOTTHARD2 0x200924
+#define GITBRANCH   "5.0.0-rc2"
+#define APILIB 0x201002
+#define APIRECEIVER 0x201002
+#define APIGUI 0x201002
+#define APICTB 0x201005
+#define APIGOTTHARD 0x201005
+#define APIGOTTHARD2 0x201005
+#define APIJUNGFRAU 0x201005
+#define APIMYTHEN3 0x201005
+#define APIMOENCH 0x201005
+#define APIEIGER 0x201005

updateAPIVersion.sh

@@ -1,6 +1,6 @@
 #require 2 arguments, API_NAME API_DIR (relative to package)
 if [ $# -lt 2 ]; then
-    echo "wrong usage of updateVersion.sh"
+    echo "Wrong usage of updateVersion.sh. Requires atleast 2 arguments [API_NAME, API_DIR]"
     exit -1
 fi
 

updateClientAPI.sh

@@ -13,12 +13,19 @@ do
 	./updateAPIVersion.sh ${arraynames[$i]} ${arraydirs[$i]}
 done
 
+#use tag
+if [ $# -eq 0 ]; then
+	declare -a TAG=$(git rev-parse --abbrev-ref HEAD)
 #find branch
-CURR_BRANCH=$(git rev-parse --abbrev-ref HEAD)
+else
+	declare -a TAG=${1}
+fi
+#CURR_BRANCH=$(git rev-parse --abbrev-ref HEAD)
 
 #update branch
 BRANCH=$(cat $API_FILE | grep GITBRANCH | awk '{print $3}' )
-sed -i s/$BRANCH/\"$CURR_BRANCH\"/g $API_FILE
+#sed -i s/$BRANCH/\"$CURR_BRANCH\"/g $API_FILE
+sed -i s/$BRANCH/\"$TAG\"/g $API_FILE