WIP doc

g2 and m3: kernel checks only when its too old

examples/gotthard_two.config

@@ -41,11 +41,11 @@ hostname bchip074+bchip075+
 
 
 r_readfreq 1
-rx_datastream 1
+rx_zmqstream 1
 
 #replace my_receiver_hostname with the hostname of 1Gb IP of the machine where the receiver runs
 rx_hostname my_receiver_hostname
-rx_datastream 1
+rx_zmqstream 1
 outdir /tmp/
 
 

examples/jctb_moench03_T1.config

@@ -459,8 +459,8 @@ rx_hostname mpc2011
 
 tengiga 1
 
-rx_datastream 1
+rx_zmqstream 1
-rx_readfreq 1
+rx_zmqfreq 1
 
 
 dac 6 800

examples/moench03_T1.config

@@ -35,7 +35,7 @@ zmqport 50001
 
 
 tengiga 1
-rx_datastream 1
+rx_zmqstream 1
 
 
 
@@ -46,7 +46,7 @@ period 0.0006
 ############################################
 fpath /mnt/moench_data/scratch/
 fwrite 0
-rx_datastream 1
+rx_zmqstream 1
 
 rx_jsonpara frameMode frame
 rx_jsonpara detectorMode counting

python/CMakeLists.txt

@@ -35,7 +35,7 @@ set( PYTHON_FILES
     gotthard.py
     gotthard2.py
     moench.py
-    jsonproxy.py
+    proxy.py
     ctb.py
     jungfrau.py
     mythen3.py

python/scripts/cmd_python.py

@@ -1,98 +0,0 @@
-import subprocess
-import locale
-out = subprocess.run(['g', 'list'], stdout = subprocess.PIPE, encoding=locale.getpreferredencoding())
-cmd = out.stdout.splitlines()
-cmd.pop(0)
-
-from slsdet import Detector, Eiger, Ctb
-
-pycmd = dir(Detector)+dir(Eiger)+dir(Ctb)
-
-#Add commands that we should not expect as direct commands in python
-pycmd += ['vrf', 'vtr', 'vrs', 'vtgstv', 'vsvn', 'vtrim',
-'vsvp', 'vth1', 'vth2', 'vth3', 'vshaper', 'vshaperneg', 'rxb_rb',
-'rxb_lb', 'vref_prech', 'vref_rstore', 'vref_cds',
-'vpreamp', 'vref_comp', 'vref_comp_fe vref_ds', 'vref_h_adc', 
-'vref_l_adc', 'iodelay', 'list', 'vref_ds', 'vis', 'vpl', 
-'vref_comp_fe', 'vph', 'vout_cm', 'vcp', 'vcn', 'vcmp_ll', 'vcmp_lr'
-
-]
-
-
-# dacs are in general not included in the python commands and we expect to
-# set them from the specialized class or using an enum 
-dacs = [
-    'vicin', 
-    'vcassh', 
-    'vcal_n', 
-    'vcal_p'
-    'vipre_out', 
-    'vipre_cds',
-    'vdd_prot',
-    'vcmp_rl', 
-    'vcmp_rr', 
-    'vcal', 'vcas', 
-    'vipre',
-    'vin_com', 
-    'vin_cm', 
-    'vrshaper', 
-    'vrshaper_n', 
-    'vrpreamp', 
-    'vishaper',
-    'vipre_out',
-    'vcom_adc1',
-    'vcom_adc2',
-    'vcom_cds',
-    'vdcsh',
-    'v_chip',
-    'vb_comp',
-    'vb_comp_adc',
-    'vb_comp_fe',
-    'vb_cs',
-    'vb_ds',
-    'vb_opa_1st',
-    'vb_opa_fd',
-    'vb_pixbuf',
-    'vb_sda',
-    'vbp_colbuf',
-    'vcal_p',
-    'vcasc_out',
-    'vcasc_sfp',
-    'vcascn_pb',
-    'vcascp_pb',
-    'vchip_comp_adc',
-    'vchip_comp_fe',
-    'vchip_cs',
-    'vchip_opa_1st',
-    'vchip_opa_fd',
-    'vchip_ref_comp_fe',
-
-]
-
-intentionally_missing  = [
-                        'temp_10ge', #temperatures already available from enum or specialized class
-                        'temp_adc',
-                        'temp_dcdc',
-                        'temp_fpga',
-                        'temp_fpgaext', 
-                        'temp_fpgafl', 
-                        'temp_fpgafr',
-                        'temp_slowadc',
-                        'temp_sodl',
-                        'temp_sodr',
-                        'trigger', #use sendSoftwareTrigger
-                        'update', #use updateServerAndFirmare
-                        'udp_validate', #use validateUdpConfiguration
-                        'udp_reconfigure', #use reconfigureUdpDestination
-                        'emin', #use rx_jsonpara
-]
-
-pycmd += intentionally_missing
-pycmd += dacs
-missing = []
-for c in cmd:
-    if c not in pycmd:
-        print(c)
-        missing.append(c)
-
-print(f'Missing: {len(missing)} commands')

python/scripts/compare_with_commandline.py

@@ -0,0 +1,132 @@
+import subprocess
+import locale
+out = subprocess.run(['g', 'list'], stdout = subprocess.PIPE, encoding=locale.getpreferredencoding())
+cmd = out.stdout.splitlines()
+cmd.pop(0)
+
+from slsdet import Detector
+
+pycmd = dir(Detector)
+
+
+# dacs are in general not included in the python commands and we expect to
+# set them from the specialized class or using an enum 
+dacs = [
+        'adcvpp',
+        'iodelay',
+        'list',
+        'rxb_lb',
+        'rxb_rb',
+        'v_chip',
+        'vb_comp',
+        'vb_comp_adc',
+        'vb_comp_fe',
+        'vb_cs',
+        'vb_ds',
+        'vb_opa_1st',
+        'vb_opa_fd',
+        'vb_pixbuf',
+        'vb_sda',
+        'vbp_colbuf',
+        'vcal',
+        'vcal_n',
+        'vcal_p',
+        'vipre_out',
+        'vcas',
+        'vcasc_out',
+        'vcasc_sfp',
+        'vcascn_pb',
+        'vcascp_pb',
+        'vcassh',
+        'vchip_comp_adc',
+        'vchip_comp_fe',
+        'vchip_cs',
+        'vchip_opa_1st',
+        'vchip_opa_fd',
+        'vchip_ref_comp_fe',
+        'vcmp_ll',
+        'vcmp_lr',
+        'vcmp_rl',
+        'vcmp_rr',
+        'vcn',
+        'vcom_adc1',
+        'vcom_adc2',
+        'vcom_cds',
+        'vcp',
+        'vdcsh',
+        'vdd_prot',
+        'vicin',
+        'vin_cm',
+        'vin_com',
+        'vipre',
+        'vipre_cds',
+        'vipre_out',
+        'vishaper',
+        'vout_cm',
+        'vref_cds',
+        'vref_comp',
+        'vref_comp_fe',
+        'vref_ds',
+        'vref_h_adc',
+        'vref_l_adc',
+        'vref_prech',
+        'vref_rstore',
+        'vrpreamp',
+        'vrshaper',
+        'vrshaper_n',
+        'vsvn',
+        'vsvp',
+        'vtgstv',
+        'vth1',
+        'vth2',
+        'vth3',
+        'vtrim'
+]
+
+intentionally_missing  = [
+                        'activate', #use getActive and getRxPadDeactivatedMode syntax is not a good fit for python
+                        'temp_10ge', #temperatures already available from enum or specialized class
+                        'temp_adc',
+                        'temp_dcdc',
+                        'temp_fpga',
+                        'temp_fpgaext', 
+                        'temp_fpgafl', 
+                        'temp_fpgafr',
+                        'temp_slowadc',
+                        'temp_sodl',
+                        'temp_sodr',
+                        'trigger', #use sendSoftwareTrigger
+                        'update', #use updateServerAndFirmare
+                        'udp_validate', #use validateUdpConfiguration
+                        'udp_reconfigure', #use reconfigureUdpDestination
+                        'pulse', # use pulseChip pulsePixel pulsePixelNmove
+                        'pulsechip', 
+                        'pulsenmove',
+]
+
+pycmd += intentionally_missing
+pycmd += dacs
+missing = []
+for c in cmd:
+    if c not in pycmd:
+        print(c)
+        missing.append(c)
+
+print(f'\nMissing: {len(missing)} commands')
+print(f'Excluded: {len(dacs)} dacs')
+print(f'Excluded: {len(intentionally_missing)} other commands')
+
+
+
+not_in_cmd = []
+for c in pycmd:
+    if c.islower() and not c.startswith('_'):
+        if c not in cmd:
+            not_in_cmd.append(c)
+print(f'\nCommands in Python and NOT in command line: {len(not_in_cmd)}')
+for c in not_in_cmd:
+    print(c)
+
+
+
+#  print(',\n'.join([f'\'{d}\'' for d in sorted(dacs)]))

python/scripts/generate_functions.py

@@ -60,6 +60,23 @@ def get_arguments(node):
         args = f", {args}"
     return args
 
+def get_arguments_with_default(node):
+    args = []
+    for arg in node.get_arguments():
+        tokens = [t.spelling for t in arg.get_tokens()]
+        print(tokens)
+        if '=' in tokens:
+            if arg.type.spelling == "sls::Positions": #TODO! automate
+                args.append("py::arg() = Positions{}")
+            else:
+                args.append('py::arg()' + ''.join(tokens[tokens.index('='):]))
+        else:
+            args.append('py::arg()')
+    args = ", ".join(args)
+    if args:
+        args = f", {args}"
+    return args
+
 
 def get_fdec(node):
     args = [a.type.spelling for a in node.get_arguments()]
@@ -86,7 +103,8 @@ def visit(node):
                     and child.access_specifier == cindex.AccessSpecifier.PUBLIC
                 ):
                     m.append(child)
-                    args = get_arguments(child)
+                    # args = get_arguments(child)
+                    args = get_arguments_with_default(child)
                     fs = get_fdec(child)
                     lines.append(
                         f'.def("{child.spelling}",{fs} &Detector::{child.spelling}{args})'

python/slsdet/__init__.py

@@ -8,31 +8,12 @@ from .mythen3 import Mythen3
 from .gotthard2 import Gotthard2
 from .gotthard import Gotthard
 from .moench import Moench
-# from .jungfrau_ctb import JungfrauCTB
-# from _slsdet import DetectorApi
 
 import _slsdet
 
 defs = _slsdet.slsDetectorDefs
 
 from .enums import *
-# runStatus = _slsdet.slsDetectorDefs.runStatus
-# speedLevel = _slsdet.slsDetectorDefs.speedLevel
-# detectorType = _slsdet.slsDetectorDefs.detectorType
-# frameDiscardPolicy = _slsdet.slsDetectorDefs.frameDiscardPolicy
-# fileFormat = _slsdet.slsDetectorDefs.fileFormat
-# dimension = _slsdet.slsDetectorDefs.dimension
-# externalSignalFlag = _slsdet.slsDetectorDefs.externalSignalFlag
-# timingMode = _slsdet.slsDetectorDefs.timingMode
-# dacIndex = _slsdet.slsDetectorDefs.dacIndex
-# detectorSettings = _slsdet.slsDetectorDefs.detectorSettings
-# clockIndex = _slsdet.slsDetectorDefs.clockIndex
-# readoutMode = _slsdet.slsDetectorDefs.readoutMode
-# masterFlags = _slsdet.slsDetectorDefs.masterFlags
-# frameModeType = _slsdet.slsDetectorDefs.frameModeType
-# detectorModeType = _slsdet.slsDetectorDefs.detectorModeType
-# burstMode = _slsdet.slsDetectorDefs.burstMode
-# timingSourceType = _slsdet.slsDetectorDefs.timingSourceType
 
 
 IpAddr = _slsdet.IpAddr

python/slsdet/detector.py

@@ -11,7 +11,7 @@ detectorType = slsDetectorDefs.detectorType
 from .utils import element_if_equal, all_equal, get_set_bits, list_to_bitmask
 from .utils import Geometry, to_geo, element, reduce_time, is_iterable
 from . import utils as ut
-from .jsonproxy import JsonProxy
+from .proxy import JsonProxy, SlowAdcProxy, ClkDivProxy
 from .registers import Register, Adc_register
 import datetime as dt
 
@@ -68,6 +68,10 @@ class Detector(CppDetectorApi):
     def __len__(self):
         return self.size()
 
+    @property
+    def nmod(self):
+        return self.size()
+
     def __repr__(self):
         return "{}(id = {})".format(self.__class__.__name__, self.getShmId())
 
@@ -140,6 +144,15 @@ class Detector(CppDetectorApi):
             raise ValueError("hostname needs to be string or list of strings")
 
 
+    @property
+    @element
+    def port(self):
+        return self.getControlPort()
+
+    @port.setter
+    def port(self, value):
+        ut.set_using_dict(self.setControlPort, value)
+
     @property
     @element
     def stopport(self):
@@ -185,6 +198,10 @@ class Detector(CppDetectorApi):
     def dr(self, dr):
         self.setDynamicRange(dr)
 
+    @property
+    def drlist(self):
+        return self.getDynamicRangeList()
+
     @property
     def module_geometry(self):
         return to_geo(self.getModuleGeometry())
@@ -195,7 +212,7 @@ class Detector(CppDetectorApi):
         return element_if_equal(ms)
 
     @property
-    def detector_size(self):
+    def detsize(self):
         return to_geo(self.getDetectorSize())
 
     @property
@@ -234,6 +251,25 @@ class Detector(CppDetectorApi):
     def frames(self, n_frames):
         self.setNumberOfFrames(n_frames)
 
+    @property
+    @element
+    def framesl(self):
+        return self.getNumberOfFramesLeft()
+
+    @property
+    @element
+    def nframes(self):
+        return self.getNumberOfFramesFromStart()
+
+    @property
+    @element
+    def powerchip(self):
+        return self.getPowerChip()
+
+    @powerchip.setter
+    def powerchip(self, value):
+        ut.set_using_dict(self.setPowerChip, value)
+
     @property
     def triggers(self):
         return element_if_equal(self.getNumberOfTriggers())
@@ -572,13 +608,14 @@ class Detector(CppDetectorApi):
         self.setFileFormat(format)
 
     @property
+    @element
     def findex(self):
         """File or Acquisition index in receiver."""
-        return element_if_equal(self.getAcquisitionIndex())
+        return self.getAcquisitionIndex()
 
     @findex.setter
     def findex(self, index):
-        self.setAcquisitionIndex(index)
+        ut.set_using_dict(self.setAcquisitionIndex, index)
 
     @property
     def fname(self):
@@ -663,21 +700,22 @@ class Detector(CppDetectorApi):
     # ZMQ Streaming Parameters (Receiver<->Client)
 
     @property
-    def rx_datastream(self):
+    @element
+    def rx_zmqstream(self):
         """
         Enable/ disable data streaming from receiver via zmq (eg. to GUI or to another process for further processing). \n
         This creates/ destroys zmq streamer threads in receiver. \n
         Switching to Gui automatically enables data streaming in receiver. \n
         Switching back to command line acquire will require disabling data streaming in receiver for fast applications.
         """
-        return element_if_equal(self.getRxZmqDataStream())
+        return self.getRxZmqDataStream()
 
-    @rx_datastream.setter
+    @rx_zmqstream.setter
-    def rx_zmqdatastream(self, enable):
+    def rx_zmqstream(self, enable):
-        self.setRxZmqDataStream(enable)
+        ut.set_using_dict(self.setRxZmqDataStream, enable)
 
     @property
-    def rx_readfreq(self):
+    def rx_zmqfreq(self):
         """Frequency of frames streamed out from receiver via zmq.
         Notes
         -----
@@ -687,8 +725,8 @@ class Detector(CppDetectorApi):
         """
         return element_if_equal(self.getRxZmqFrequency())
 
-    @rx_readfreq.setter
+    @rx_zmqfreq.setter
-    def rx_readfreq(self, nth_frame):
+    def rx_zmqfreq(self, nth_frame):
         self.setRxZmqFrequency(nth_frame)
 
     @property
@@ -860,38 +898,6 @@ class Detector(CppDetectorApi):
     def udp_dstport2(self, port):
         self.setDestinationUDPPort2(port)
 
-    @property
-    def src_udpmac(self):
-        return element_if_equal(self.getSourceUDPMAC())
-
-    @src_udpmac.setter
-    def src_udpmac(self, mac):
-        self.setSourceUDPMAC(MacAddr(mac))
-
-    @property
-    def src_udpip2(self):
-        return element_if_equal(self.getSourceUDPIP())
-
-    @src_udpip2.setter
-    def src_udpip2(self, ip):
-        self.setSourceUDPIP(IpAddr(ip))
-
-    @property
-    def src_udpip(self):
-        return element_if_equal(self.getSourceUDPIP())
-
-    @src_udpip.setter
-    def src_udpip(self, ip):
-        self.setSourceUDPIP(IpAddr(ip))
-
-    @property
-    def src_udpmac2(self):
-        return element_if_equal(self.getSourceUDPMAC2())
-
-    @src_udpmac2.setter
-    def src_udpmac2(self, mac):
-        self.setSourceUDPMAC2(MacAddr(mac))
-
     @property
     def highvoltage(self):
         """High voltage to the sensor in Voltage.
@@ -1013,6 +1019,10 @@ class Detector(CppDetectorApi):
         """
         return self._register
 
+    @property
+    def slowadc(self):
+        return SlowAdcProxy(self)
+
     @property
     def daclist(self):
         """Gets the list of enums for every dac for this detector."""
@@ -1184,23 +1194,27 @@ class Detector(CppDetectorApi):
         return JsonProxy(self)
 
 
-
-    @rx_jsonpara.setter
-    def rx_jsonpara(self, args):
-        for key, value in args.items():
-            self.setAdditionalJsonParameter(key, str(value))
-
     @property
     @element
     def rx_jsonaddheader(self):
         return self.getAdditionalJsonHeader()
 
+    @rx_jsonaddheader.setter
+    def rx_jsonaddheader(self, args):
+        ut.set_using_dict(self.setAdditionalJsonHeader, args)
+
     @property
-    def frameindex(self):
+    def rx_frameindex(self):
         return self.getRxCurrentFrameIndex()
 
     @property
     def threshold(self):
+        """[Eiger] Threshold in eV
+        Note
+        ----
+        To change settings as well or set threshold without trimbits, use setThresholdEnergy.
+        :setter: It loads trim files from settingspath.
+        """
         return element_if_equal(self.getThresholdEnergy())
 
     @threshold.setter
@@ -1209,6 +1223,15 @@ class Detector(CppDetectorApi):
 
     @property
     def timing(self):
+        """
+        Set Timing Mode of detector. Enum: timingMode
+        Note
+        -----
+        Default: AUTO_TIMING \n
+        [Jungfrau][Gotthard][Ctb][Moench][Gotthard2] AUTO_TIMING, TRIGGER_EXPOSURE \n
+        [Mythen3] AUTO_TIMING, TRIGGER_EXPOSURE, GATED, TRIGGER_GATED \n
+        [Eiger] AUTO_TIMING, TRIGGER_EXPOSURE, GATED, BURST_TRIGGER
+        """
         return element_if_equal(self.getTimingMode())
 
     @timing.setter
@@ -1247,7 +1270,7 @@ class Detector(CppDetectorApi):
 
     """
 
-    <<<Eiger>>>
+    <<<-----------------------Eiger specific----------------------->>>
 
     """
 
@@ -1285,6 +1308,15 @@ class Detector(CppDetectorApi):
     def subexptime(self, t):
         ut.set_time_using_dict(self.setSubExptime, t)
 
+    @property
+    @element
+    def readnlines(self):
+        return self.getPartialReadout()
+
+    @readnlines.setter
+    def readnlines(self, value):
+        ut.set_using_dict(self.setPartialReadout, value)
+
 
     @property
     def subdeadtime(self):
@@ -1338,6 +1370,7 @@ class Detector(CppDetectorApi):
 
     @property
     def tengiga(self):
+        """[Eiger][Ctb][Moench][Mythen3] 10GbE Enable."""
         return element_if_equal(self.getTenGiga())
 
     @tengiga.setter
@@ -1424,6 +1457,12 @@ class Detector(CppDetectorApi):
     def auto_comp_disable(self, value):
         self.setAutoCompDisable(value)
 
+
+    @property
+    @element
+    def now(self):
+        return self.getActualTime()
+
     @property
     @element
     def storagecells(self):
@@ -1487,6 +1526,13 @@ class Detector(CppDetectorApi):
     @property
     @element
     def temp_threshold(self):
+        """
+        [Jungfrau] Threshold temperature in degrees. 
+        Note
+        -----
+        If temperature crosses threshold temperature and temperature control is enabled, power to chip will be switched off and temperature event occurs. \n
+        To power on chip again, temperature has to be less than threshold temperature and temperature event has to be cleared/reset.
+        """
         return self.getThresholdTemperature()
 
     @temp_threshold.setter
@@ -1496,6 +1542,14 @@ class Detector(CppDetectorApi):
     @property
     @element
     def temp_event(self):
+        """
+        [Jungfrau] 1, if a temperature event occured. \n
+        Note
+        ----
+        If temperature crosses threshold temperature and temperature control is enabled, power to chip will be switched off and temperature event occurs. \n
+        To power on chip again, temperature has to be less than threshold temperature and temperature event has to be cleared/reset.
+        :setter: To clear the event, set it to 0.
+        """
         return self.getTemperatureEvent()
 
     @temp_event.setter
@@ -1507,6 +1561,14 @@ class Detector(CppDetectorApi):
     @property
     @element
     def temp_control(self):
+        """
+        [Jungfrau] Temperature control enable. 
+        Note
+        -----
+        Default is 0 (disabled). \n
+        If temperature crosses threshold temperature and temperature control is enabled, power to chip will be switched off and temperature event occurs. \n
+        To power on chip again, temperature has to be less than threshold temperature and temperature event has to be cleared/reset.
+        """
         return self.getTemperatureControl()
 
     @temp_control.setter
@@ -1859,6 +1921,12 @@ class Detector(CppDetectorApi):
 
     @property
     def syncclk(self):
+        """
+        [Ctb][Moench] Sync clock in MHz.
+        Note
+        -----
+        :setter: Not implemented
+        """
         return element_if_equal(self.getSYNCClock())
 
     @property
@@ -2222,4 +2290,18 @@ class Detector(CppDetectorApi):
         return self.getMeasuredCurrent(dacIndex.I_POWER_IO)
 
 
+    @property
+    def clkdiv(self):
+        return ClkDivProxy(self)
 
+
+    """
+
+    <<<-----------------------Gotthard specific----------------------->>>
+
+    """
+
+    @property
+    def exptimel(self):
+        t = self.getExptimeLeft()
+        return reduce_time(t)

python/slsdet/enums.py

@@ -13,7 +13,5 @@ detectorSettings = _slsdet.slsDetectorDefs.detectorSettings
 clockIndex = _slsdet.slsDetectorDefs.clockIndex
 readoutMode = _slsdet.slsDetectorDefs.readoutMode
 masterFlags = _slsdet.slsDetectorDefs.masterFlags
-frameModeType = _slsdet.slsDetectorDefs.frameModeType
-detectorModeType = _slsdet.slsDetectorDefs.detectorModeType
 burstMode = _slsdet.slsDetectorDefs.burstMode
 timingSourceType = _slsdet.slsDetectorDefs.timingSourceType

python/slsdet/jsonproxy.py

@@ -1,30 +0,0 @@
-from .utils import element_if_equal
-
-class JsonProxy:
-    """
-    Proxy class to allow for intuitive setting and getting of rx_jsonpara
-    This class is returned by Detectr.rx_jsonpara
-    """
-    def __init__(self, det):
-        self.det = det
-
-    def __getitem__(self, key):
-        return element_if_equal(self.det.getAdditionalJsonParameter(key))
-
-    def __setitem__(self, key, value):
-        self.det.setAdditionalJsonParameter(key, str(value))
-
-    def __repr__(self):
-        r = element_if_equal(self.det.getAdditionalJsonHeader())
-        if isinstance(r, list):
-            rstr = ''
-            for i, list_item in enumerate(r):
-                list_item = dict(list_item)
-                rstr += ''.join([f'{i}:{key}: {value}\n' for key, value in list_item.items()])
-
-            return rstr.strip('\n')
-        else:
-            r = dict(r)
-            return '\n'.join([f'{key}: {value}' for key, value in r.items()])
-
-    

python/slsdet/proxy.py

@@ -0,0 +1,85 @@
+from .utils import element_if_equal
+from .enums import dacIndex
+
+
+def set_proxy_using_dict(func, key, value):
+    if isinstance(value, dict) and all(isinstance(k, int) for k in value.keys()):
+        for dkey, dvalue in value.items():
+            func(key, dvalue, [dkey])
+    else:
+        func(key, value)
+
+class JsonProxy:
+    """
+    Proxy class to allow for intuitive setting and getting of rx_jsonpara
+    This class is returned by Detectr.rx_jsonpara
+    """
+    def __init__(self, det):
+        self.det = det
+
+    def __getitem__(self, key):
+        return element_if_equal(self.det.getAdditionalJsonParameter(key))
+
+    def __setitem__(self, key, value):
+        self.det.setAdditionalJsonParameter(key, str(value))
+
+    def __repr__(self):
+        r = element_if_equal(self.det.getAdditionalJsonHeader())
+        if isinstance(r, list):
+            rstr = ''
+            for i, list_item in enumerate(r):
+                list_item = dict(list_item)
+                rstr += ''.join([f'{i}:{key}: {value}\n' for key, value in list_item.items()])
+
+            return rstr.strip('\n')
+        else:
+            r = dict(r)
+            return '\n'.join([f'{key}: {value}' for key, value in r.items()])
+
+    
+
+class SlowAdcProxy:
+    """
+    Proxy class to allow for more intuitive reading the slow ADCs
+    """
+    def __init__(self, det):
+        self.det = det
+
+    def __getitem__(self, key):
+        dac_index = dacIndex(int(dacIndex.SLOW_ADC0)+key)
+        return element_if_equal(self.det.getSlowADC(dac_index))
+
+    def __repr__(self):
+        rstr = ''
+        for i in range(7):
+            r = element_if_equal(self.__getitem__(i))
+            if isinstance(r, list):
+                rstr += ' '.join(f'{item} mV' for item in r)
+            else:
+                rstr += f'{i}: {r} mV\n'
+        
+        return rstr.strip('\n')
+
+class ClkDivProxy:
+    """
+    Proxy class to allow for more intuitive reading clockdivider
+    """
+    def __init__(self, det):
+        self.det = det
+
+    def __getitem__(self, key):
+        return element_if_equal(self.det.getClockDivider(key))
+
+    def __setitem__(self, key, value):
+        set_proxy_using_dict(self.det.setClockDivider, key, value)
+
+    def __repr__(self):
+        rstr = ''
+        for i in range(6):
+            r = element_if_equal(self.__getitem__(i))
+            if isinstance(r, list):
+                rstr += ' '.join(f'{item}' for item in r)
+            else:
+                rstr += f'{i}: {r}\n'
+        
+        return rstr.strip('\n')

python/slsdet/utils.py

@@ -111,14 +111,14 @@ def make_string_path(path):
 
 
 def set_using_dict(func, args):
-    if isinstance(args, dict):
+    if isinstance(args, dict) and all(isinstance(k, int) for k in args.keys()):
         for key, value in args.items():
             func(value, [key])
     else:
         func(args)
 
 def set_time_using_dict(func, args):
-    if isinstance(args, dict):
+    if isinstance(args, dict) and all(isinstance(k, int) for k in args.keys()):
         for key, value in args.items():
             if isinstance(value, int):
                 value = float(value)

python/src/detector.cpp

@@ -322,11 +322,11 @@ void init_det(py::module &m) {
              (Result<int>(Detector::*)(defs::dacIndex, bool, sls::Positions)
                   const) &
                  Detector::getDAC,
-             py::arg(), py::arg(), py::arg() = Positions{})
+             py::arg(), py::arg() = false, py::arg() = Positions{})
         .def("setDAC",
              (void (Detector::*)(defs::dacIndex, int, bool, sls::Positions)) &
                  Detector::setDAC,
-             py::arg(), py::arg(), py::arg(), py::arg() = Positions{})
+             py::arg(), py::arg(), py::arg() = false, py::arg() = Positions{})
         .def("getOnChipDAC",
              (Result<int>(Detector::*)(defs::dacIndex, int, sls::Positions)
                   const) &
@@ -346,6 +346,14 @@ void init_det(py::module &m) {
                                  sls::Positions)) &
                  Detector::setExternalSignalFlags,
              py::arg(), py::arg(), py::arg() = Positions{})
+        .def("getParallelMode",
+             (Result<bool>(Detector::*)(sls::Positions) const) &
+                 Detector::getParallelMode,
+             py::arg() = Positions{})
+        .def("setParallelMode",
+             (void (Detector::*)(bool, sls::Positions)) &
+                 Detector::setParallelMode,
+             py::arg(), py::arg() = Positions{})
         .def("acquire", (void (Detector::*)()) & Detector::acquire)
         .def("clearAcquiringFlag",
              (void (Detector::*)()) & Detector::clearAcquiringFlag)
@@ -480,14 +488,14 @@ void init_det(py::module &m) {
              py::arg() = Positions{})
         .def("setDestinationUDPPort",
              (void (Detector::*)(int, int)) & Detector::setDestinationUDPPort,
-             py::arg(), py::arg())
+             py::arg(), py::arg() = -1)
         .def("getDestinationUDPPort2",
              (Result<int>(Detector::*)(sls::Positions) const) &
                  Detector::getDestinationUDPPort2,
              py::arg() = Positions{})
         .def("setDestinationUDPPort2",
              (void (Detector::*)(int, int)) & Detector::setDestinationUDPPort2,
-             py::arg(), py::arg())
+             py::arg(), py::arg() = -1)
         .def("reconfigureUDPDestination",
              (void (Detector::*)(sls::Positions)) &
                  Detector::reconfigureUDPDestination,
@@ -560,7 +568,7 @@ void init_det(py::module &m) {
                  Detector::getRxPort,
              py::arg() = Positions{})
         .def("setRxPort", (void (Detector::*)(int, int)) & Detector::setRxPort,
-             py::arg(), py::arg())
+             py::arg(), py::arg() = -1)
         .def("getRxFifoDepth",
              (Result<int>(Detector::*)(sls::Positions) const) &
                  Detector::getRxFifoDepth,
@@ -722,7 +730,7 @@ void init_det(py::module &m) {
              py::arg() = Positions{})
         .def("setRxZmqPort",
              (void (Detector::*)(int, int)) & Detector::setRxZmqPort, py::arg(),
-             py::arg())
+             py::arg() = -1)
         .def("getRxZmqIP",
              (Result<sls::IpAddr>(Detector::*)(sls::Positions) const) &
                  Detector::getRxZmqIP,
@@ -737,7 +745,7 @@ void init_det(py::module &m) {
              py::arg() = Positions{})
         .def("setClientZmqPort",
              (void (Detector::*)(int, int)) & Detector::setClientZmqPort,
-             py::arg(), py::arg())
+             py::arg(), py::arg() = -1)
         .def("getClientZmqIp",
              (Result<sls::IpAddr>(Detector::*)(sls::Positions) const) &
                  Detector::getClientZmqIp,
@@ -770,7 +778,8 @@ void init_det(py::module &m) {
              (void (Detector::*)(int, defs::detectorSettings, bool,
                                  sls::Positions)) &
                  Detector::setThresholdEnergy,
-             py::arg(), py::arg(), py::arg(), py::arg() = Positions{})
+             py::arg(), py::arg() = defs::STANDARD, py::arg() = true,
+             py::arg() = Positions{})
         .def("getSettingsPath",
              (Result<std::string>(Detector::*)(sls::Positions) const) &
                  Detector::getSettingsPath,
@@ -779,14 +788,6 @@ void init_det(py::module &m) {
              (void (Detector::*)(const std::string &, sls::Positions)) &
                  Detector::setSettingsPath,
              py::arg(), py::arg() = Positions{})
-        .def("getParallelMode",
-             (Result<bool>(Detector::*)(sls::Positions) const) &
-                 Detector::getParallelMode,
-             py::arg() = Positions{})
-        .def("setParallelMode",
-             (void (Detector::*)(bool, sls::Positions)) &
-                 Detector::setParallelMode,
-             py::arg(), py::arg() = Positions{})
         .def("getOverFlowMode",
              (Result<bool>(Detector::*)(sls::Positions) const) &
                  Detector::getOverFlowMode,
@@ -1344,31 +1345,6 @@ void init_det(py::module &m) {
                                  sls::Positions)) &
                  Detector::setAdditionalJsonParameter,
              py::arg(), py::arg(), py::arg() = Positions{})
-        .def("getDetectorMinMaxEnergyThreshold",
-             (Result<int>(Detector::*)(const bool, sls::Positions) const) &
-                 Detector::getDetectorMinMaxEnergyThreshold,
-             py::arg(), py::arg() = Positions{})
-        .def("setDetectorMinMaxEnergyThreshold",
-             (void (Detector::*)(const bool, const int, sls::Positions)) &
-                 Detector::setDetectorMinMaxEnergyThreshold,
-             py::arg(), py::arg(), py::arg() = Positions{})
-        .def("getFrameMode",
-             (Result<defs::frameModeType>(Detector::*)(sls::Positions) const) &
-                 Detector::getFrameMode,
-             py::arg() = Positions{})
-        .def("setFrameMode",
-             (void (Detector::*)(defs::frameModeType, sls::Positions)) &
-                 Detector::setFrameMode,
-             py::arg(), py::arg() = Positions{})
-        .def("getDetectorMode",
-             (Result<defs::detectorModeType>(Detector::*)(sls::Positions)
-                  const) &
-                 Detector::getDetectorMode,
-             py::arg() = Positions{})
-        .def("setDetectorMode",
-             (void (Detector::*)(defs::detectorModeType, sls::Positions)) &
-                 Detector::setDetectorMode,
-             py::arg(), py::arg() = Positions{})
         .def("programFPGA",
              (void (Detector::*)(const std::string &, sls::Positions)) &
                  Detector::programFPGA,

python/src/enums.cpp

@@ -259,20 +259,6 @@ void init_enums(py::module &m) {
         .value("IS_SLAVE", slsDetectorDefs::masterFlags::IS_SLAVE)
         .export_values();
 
-    py::enum_<slsDetectorDefs::frameModeType>(Defs, "frameModeType")
-        .value("PEDESTAL", slsDetectorDefs::frameModeType::PEDESTAL)
-        .value("NEW_PEDESTAL", slsDetectorDefs::frameModeType::NEW_PEDESTAL)
-        .value("FLATFIELD", slsDetectorDefs::frameModeType::FLATFIELD)
-        .value("NEW_FLATFIELD", slsDetectorDefs::frameModeType::NEW_FLATFIELD)
-        .export_values();
-
-    py::enum_<slsDetectorDefs::detectorModeType>(Defs, "detectorModeType")
-        .value("COUNTING", slsDetectorDefs::detectorModeType::COUNTING)
-        .value("INTERPOLATING",
-               slsDetectorDefs::detectorModeType::INTERPOLATING)
-        .value("ANALOG", slsDetectorDefs::detectorModeType::ANALOG)
-        .export_values();
-
     py::enum_<slsDetectorDefs::burstMode>(Defs, "burstMode")
         .value("BURST_INTERNAL", slsDetectorDefs::burstMode::BURST_INTERNAL)
         .value("BURST_EXTERNAL", slsDetectorDefs::burstMode::BURST_EXTERNAL)

python/tests/detector_eiger.py

@@ -379,15 +379,15 @@ def test_set_readout_clock_3(d, mocker):
     d.readout_clock = 'Super Slow Speed'
     m.assert_called_once_with(3)
 
-#----------------------------------------------------------------rx_datastream
+#----------------------------------------------------------------rx_zmqstream
-def test_get_rx_datastream(d, mocker):
+def test_get_rx_zmqstream(d, mocker):
     m = mocker.patch('_slsdet.DetectorApi.getRxDataStreamStatus')
     m.return_value = False
-    assert d.rx_datastream == False
+    assert d.rx_zmqstream == False
 
-def test_set_rx_datastream(d, mocker):
+def test_set_rx_zmqstream(d, mocker):
     m = mocker.patch('_slsdet.DetectorApi.setRxDataStreamStatus')
-    d.rx_datastream = True
+    d.rx_zmqstream = True
     m.assert_called_once_with(True)
 
 def test_get_rx_zmqip(d, mocker):

python/tests/detector_test.py

@@ -412,15 +412,15 @@ def test_set_counters_single(d, mocker):
 #     d.readout_clock = 'Super Slow Speed'
 #     m.assert_called_once_with(3)
 
-# #----------------------------------------------------------------rx_datastream
+# #----------------------------------------------------------------rx_zmqstream
-# def test_get_rx_datastream(d, mocker):
+# def test_get_rx_zmqstream(d, mocker):
 #     m = mocker.patch('_slsdet.DetectorApi.getRxDataStreamStatus')
 #     m.return_value = False
-#     assert d.rx_datastream == False
+#     assert d.rx_zmqstream == False
 
-# def test_set_rx_datastream(d, mocker):
+# def test_set_rx_zmqstream(d, mocker):
 #     m = mocker.patch('_slsdet.DetectorApi.setRxDataStreamStatus')
-#     d.rx_datastream = True
+#     d.rx_zmqstream = True
 #     m.assert_called_once_with(True)
 
 # def test_get_rx_zmqip(d, mocker):

slsDetectorServers/ctbDetectorServer/slsDetectorFunctionList.c

@@ -23,6 +23,7 @@
 
 // Global variable from slsDetectorServer_funcs
 extern int debugflag;
+extern int updateFlag;
 extern udpStruct udpDetails;
 extern const enum detectorType myDetectorType;
 
@@ -105,7 +106,8 @@ void basictests() {
     }
 
     // does check only if flag is 0 (by default), set by command line
-    if ((!debugflag) && ((checkType() == FAIL) || (testFpga() == FAIL) ||
+    if ((!debugflag) && (!updateFlag) &&
+        ((checkType() == FAIL) || (testFpga() == FAIL) ||
          (testBus() == FAIL))) {
         strcpy(initErrorMessage, "Could not pass basic tests of FPGA and bus. "
                                  "Dangerous to continue.\n");
@@ -145,7 +147,7 @@ void basictests() {
          (long long int)client_sw_apiversion));
 
     // return if flag is not zero, debug mode
-    if (debugflag) {
+    if (debugflag || updateFlag) {
         return;
     }
 
@@ -417,7 +419,7 @@ uint32_t getDetectorIP() {
 /* initialization */
 
 void initControlServer() {
-    if (initError == OK) {
+    if (!updateFlag && initError == OK) {
         setupDetector();
     }
     initCheckDone = 1;

slsDetectorServers/eigerDetectorServer/slsDetectorFunctionList.c

@@ -20,6 +20,7 @@
 
 // Global variable from slsDetectorServer_funcs
 extern int debugflag;
+extern int updateFlag;
 extern udpStruct udpDetails;
 extern const enum detectorType myDetectorType;
 
@@ -140,7 +141,7 @@ void basictests() {
     return;
 #endif
     // return if debugflag is not zero, debug mode
-    if (debugflag) {
+    if (debugflag || updateFlag) {
         return;
     }
 
@@ -319,7 +320,7 @@ u_int32_t getDetectorIP() {
 
 void initControlServer() {
     LOG(logINFOBLUE, ("Configuring Control server\n"));
-    if (initError == OK) {
+    if (!updateFlag && initError == OK) {
         readDetectorNumber();
         getModuleConfiguration();
 #ifndef VIRTUAL

slsDetectorServers/eigerDetectorServer/slsDetectorServer_defs.h

@@ -1,7 +1,7 @@
 #pragma once
 #include "sls_detector_defs.h"
 
-#define REQUIRED_FIRMWARE_VERSION (26)
+#define REQUIRED_FIRMWARE_VERSION (27)
 #define IDFILECOMMAND             "more /home/root/executables/detid.txt"
 #define CONFIG_FILE               ("config_eiger.txt")
 #define WAIT_STOP_SERVER_START    (1 * 1000 * 1000)

slsDetectorServers/gotthard2DetectorServer/slsDetectorFunctionList.c

@@ -22,6 +22,7 @@
 
 // Global variable from slsDetectorServer_funcs
 extern int debugflag;
+extern int updateFlag;
 extern int checkModuleFlag;
 extern udpStruct udpDetails;
 extern const enum detectorType myDetectorType;
@@ -92,8 +93,9 @@ void basictests() {
         return;
     }
     // does check only if flag is 0 (by default), set by command line
-    if ((!debugflag) && ((checkType() == FAIL) || (testFpga() == FAIL) ||
+    if ((!debugflag) && (!updateFlag) &&
-                         (testBus() == FAIL))) {
+        ((checkKernelVersion() == FAIL) || (checkType() == FAIL) ||
+         (testFpga() == FAIL) || (testBus() == FAIL))) {
         sprintf(initErrorMessage,
                 "Could not pass basic tests of FPGA and bus. Dangerous to "
                 "continue. (Firmware version:0x%llx) \n",
@@ -131,7 +133,7 @@ void basictests() {
          (long long int)client_sw_apiversion));
 
     // return if flag is not zero, debug mode
-    if (debugflag) {
+    if (debugflag || updateFlag) {
         return;
     }
 
@@ -175,6 +177,13 @@ void basictests() {
 #endif
 }
 
+int checkKernelVersion() {
+#ifdef VIRTUAL
+    return OK;
+#endif
+    return Nios_checkKernelVersion(KERNEL_DATE_VRSN);
+}
+
 int checkType() {
 #ifdef VIRTUAL
     return OK;
@@ -326,7 +335,7 @@ u_int32_t getDetectorIP() {
 /* initialization */
 
 void initControlServer() {
-    if (initError == OK) {
+    if (!updateFlag && initError == OK) {
         setupDetector();
     }
     initCheckDone = 1;

slsDetectorServers/gotthard2DetectorServer/slsDetectorServer_defs.h

@@ -2,6 +2,7 @@
 #include "sls_detector_defs.h"
 
 #define REQRD_FRMWRE_VRSN (0x200707)
+#define KERNEL_DATE_VRSN  "Wed May 20 13:58:38 CEST 2020"
 
 #define CTRL_SRVR_INIT_TIME_US (300 * 1000)
 

slsDetectorServers/gotthardDetectorServer/slsDetectorFunctionList.c

@@ -18,6 +18,9 @@
 #include <time.h>
 #endif
 
+// Global variable from slsDetectorServer_funcs
+extern int debugflag;
+extern int updateFlag;
 extern udpStruct udpDetails;
 extern const enum detectorType myDetectorType;
 
@@ -91,7 +94,8 @@ void basictests() {
     }
 
     // does check only if flag is 0 (by default), set by command line
-    if (((checkType() == FAIL) || (testFpga() == FAIL) ||
+    if ((!debugflag) && (!updateFlag) &&
+        ((checkType() == FAIL) || (testFpga() == FAIL) ||
          (testBus() == FAIL))) {
         strcpy(initErrorMessage, "Could not pass basic tests of FPGA and bus. "
                                  "Dangerous to continue.\n");
@@ -125,7 +129,9 @@ void basictests() {
          (long long int)fwversion, (long long int)swversion,
          (long long int)client_sw_apiversion));
 
+    if (!debugflag || updateFlag) {
         LOG(logINFO, ("Basic Tests - success\n"));
+    }
 #endif
 }
 
@@ -343,7 +349,7 @@ u_int32_t getBoardRevision() {
 /* initialization */
 
 void initControlServer() {
-    if (initError == OK) {
+    if (!updateFlag && initError == OK) {
         setupDetector();
     }
     initCheckDone = 1;

slsDetectorServers/jungfrauDetectorServer/slsDetectorFunctionList.c

@@ -22,6 +22,7 @@
 
 // Global variable from slsDetectorServer_funcs
 extern int debugflag;
+extern int updateFlag;
 extern udpStruct udpDetails;
 extern const enum detectorType myDetectorType;
 
@@ -77,7 +78,8 @@ void basictests() {
     }
 
     // does check only if flag is 0 (by default), set by command line
-    if ((!debugflag) && ((checkType() == FAIL) || (testFpga() == FAIL) ||
+    if ((!debugflag) && (!updateFlag) &&
+        ((checkType() == FAIL) || (testFpga() == FAIL) ||
          (testBus() == FAIL))) {
         strcpy(initErrorMessage, "Could not pass basic tests of FPGA and bus. "
                                  "Dangerous to continue.\n");
@@ -119,7 +121,7 @@ void basictests() {
          (long long int)client_sw_apiversion));
 
     // return if flag is not zero, debug mode
-    if (debugflag) {
+    if (debugflag || updateFlag) {
         return;
     }
 
@@ -347,7 +349,7 @@ u_int32_t getDetectorIP() {
 /* initialization */
 
 void initControlServer() {
-    if (initError == OK) {
+    if (!updateFlag && initError == OK) {
         setupDetector();
     }
     initCheckDone = 1;

slsDetectorServers/moenchDetectorServer/slsDetectorFunctionList.c

@@ -21,6 +21,7 @@
 
 // Global variable from slsDetectorServer_funcs
 extern int debugflag;
+extern int updateFlag;
 extern udpStruct udpDetails;
 extern const enum detectorType myDetectorType;
 
@@ -101,7 +102,8 @@ void basictests() {
     }
 
     // does check only if flag is 0 (by default), set by command line
-    if ((!debugflag) && ((checkType() == FAIL) || (testFpga() == FAIL) ||
+    if ((!debugflag) && (!updateFlag) &&
+        ((checkType() == FAIL) || (testFpga() == FAIL) ||
          (testBus() == FAIL))) {
         strcpy(initErrorMessage, "Could not pass basic tests of FPGA and bus. "
                                  "Dangerous to continue.\n");
@@ -141,7 +143,7 @@ void basictests() {
          (long long int)client_sw_apiversion));
 
     // return if flag is not zero, debug mode
-    if (debugflag) {
+    if (debugflag || updateFlag) {
         return;
     }
 
@@ -413,7 +415,7 @@ uint32_t getDetectorIP() {
 /* initialization */
 
 void initControlServer() {
-    if (initError == OK) {
+    if (!updateFlag && initError == OK) {
         setupDetector();
     }
     initCheckDone = 1;

slsDetectorServers/mythen3DetectorServer/RegisterDefs.h

@@ -129,6 +129,10 @@
 #define CONTROL_STP_ACQSTN_MSK          (0x00000001 << CONTROL_STP_ACQSTN_OFST)
 #define CONTROL_STRT_PATTERN_OFST       (2)
 #define CONTROL_STRT_PATTERN_MSK        (0x00000001 << CONTROL_STRT_PATTERN_OFST)
+#define CONTROL_STRT_READOUT_OFST       (3) // not connected in software yet
+#define CONTROL_STRT_READOUT_MSK        (0x00000001 << CONTROL_STRT_READOUT_OFST)
+#define CONTROL_STRT_SW_TRIGGER_OFST    (4)
+#define CONTROL_STRT_SW_TRIGGER_MSK     (0x00000001 << CONTROL_STRT_SW_TRIGGER_OFST)
 #define CONTROL_CRE_RST_OFST            (10)
 #define CONTROL_CRE_RST_MSK             (0x00000001 << CONTROL_CRE_RST_OFST)
 #define CONTROL_PRPHRL_RST_OFST         (11) // Only GBE10?

slsDetectorServers/mythen3DetectorServer/slsDetectorFunctionList.c

@@ -21,6 +21,7 @@
 
 // Global variable from slsDetectorServer_funcs
 extern int debugflag;
+extern int updateFlag;
 extern int checkModuleFlag;
 extern udpStruct udpDetails;
 extern const enum detectorType myDetectorType;
@@ -80,8 +81,9 @@ void basictests() {
         return;
     }
     // does check only if flag is 0 (by default), set by command line
-    if ((!debugflag) && ((checkType() == FAIL) || (testFpga() == FAIL) ||
+    if ((!debugflag) && (!updateFlag) &&
-                         (testBus() == FAIL))) {
+        ((checkKernelVersion() == FAIL) || (checkType() == FAIL) ||
+         (testFpga() == FAIL) || (testBus() == FAIL))) {
         strcpy(initErrorMessage, "Could not pass basic tests of FPGA and bus. "
                                  "Dangerous to continue.\n");
         LOG(logERROR, ("%s\n\n", initErrorMessage));
@@ -117,7 +119,7 @@ void basictests() {
          (long long int)client_sw_apiversion));
 
     // return if flag is not zero, debug mode
-    if (debugflag) {
+    if (debugflag || updateFlag) {
         return;
     }
 
@@ -161,6 +163,13 @@ void basictests() {
 #endif
 }
 
+int checkKernelVersion() {
+#ifdef VIRTUAL
+    return OK;
+#endif
+    return Nios_checkKernelVersion(KERNEL_DATE_VRSN);
+}
+
 int checkType() {
 #ifdef VIRTUAL
     return OK;
@@ -313,7 +322,7 @@ u_int32_t getDetectorIP() {
 /* initialization */
 
 void initControlServer() {
-    if (initError == OK) {
+    if (!updateFlag && initError == OK) {
         setupDetector();
     }
     initCheckDone = 1;
@@ -2297,6 +2306,12 @@ int stopStateMachine() {
     return OK;
 }
 
+int softwareTrigger() {
+    LOG(logINFO, ("Sending Software Trigger\n"));
+    bus_w(CONTROL_REG, bus_r(CONTROL_REG) | CONTROL_STRT_SW_TRIGGER_MSK);
+    return OK;
+}
+
 enum runStatus getRunStatus() {
     LOG(logDEBUG1, ("Getting status\n"));
     // scan error or running

slsDetectorServers/mythen3DetectorServer/slsDetectorServer_defs.h

@@ -2,6 +2,7 @@
 #include "sls_detector_defs.h"
 
 #define REQRD_FRMWRE_VRSN 0x190000
+#define KERNEL_DATE_VRSN  "Wed May 20 13:58:38 CEST 2020"
 
 #define CTRL_SRVR_INIT_TIME_US (300 * 1000)
 
@@ -36,12 +37,14 @@
 #define DEFAULT_DELAY_AFTER_TRIGGER (0)
 #define DEFAULT_HIGH_VOLTAGE        (0)
 #define DEFAULT_TIMING_MODE         (AUTO_TIMING)
-#define DEFAULT_READOUT_C0               (8) //(125000000) // rdo_clk, 125 MHz
+#define DEFAULT_READOUT_C0          (10) //(100000000) // rdo_clk, 100 MHz
-#define DEFAULT_READOUT_C1               (8) //(125000000) // rdo_x2_clk, 125 MHz
+#define DEFAULT_READOUT_C1          (10) //(100000000) // smp sample clk (x2), 100 MHz
-#define DEFAULT_SYSTEM_C0                (4) //(250000000) // run_clk, 250 MHz
+#define DEFAULT_SYSTEM_C0           (20) // (50000000) // run_clk, 50 MHz
-#define DEFAULT_SYSTEM_C1                (8) //(125000000) // sync_clk, 125 MHz
+#define DEFAULT_SYSTEM_C1           (10) //(100000000) // sync_clk, 100 MHz
-#define DEFAULT_SYSTEM_C2                (8) //(125000000) // str_clk, 125 MHz
+#define DEFAULT_SYSTEM_C2           (10) //(100000000) // str_clk, 100 MHz
-#define DEFAULT_SYSTEM_C3                (5) //(200000000) // smp_clk, 200 MHz (only for timing receiver)
+#define DEFAULT_SYSTEM_C3           (5)  //(200000000) // smp_clk, 200 MHz
+// (DEFAULT_SYSTEM_C3 only for timing receiver) should not be changed
+
 #define DEFAULT_ASIC_LATCHING_NUM_PULSES (10)
 #define DEFAULT_MSTR_OTPT_P1_NUM_PULSES  (20)
 
@@ -110,7 +113,8 @@ enum CLKINDEX {
     NUM_CLOCKS
 };
 #define CLK_NAMES                                                              \
-    "READOUT_C0", "READOUT_C1", "SYSTEM_C0", "SYSTEM_C1", "SYSTEM_C2", "SYSTEM_C3"
+    "READOUT_C0", "READOUT_C1", "SYSTEM_C0", "SYSTEM_C1", "SYSTEM_C2",         \
+        "SYSTEM_C3"
 enum PLLINDEX { READOUT_PLL, SYSTEM_PLL };
 
 /* Struct Definitions */

slsDetectorServers/slsDetectorServer/include/common.h

@@ -1,6 +1,7 @@
 #pragma once
 
 #include <stdio.h>
+#include <time.h>
 
 /**
  * Convert a value from a range to a different range (eg voltage to dac or vice
@@ -17,3 +18,5 @@ int ConvertToDifferentRange(int inputMin, int inputMax, int outputMin,
                             int outputMax, int inputValue, int *outputValue);
 
 int getAbsPath(char *buf, size_t bufSize, char *fname);
+
+int GetTimeFromString(char *buf, time_t *result);

slsDetectorServers/slsDetectorServer/include/nios.h

@@ -87,3 +87,7 @@ int mapCSP0(void);
  * Get Nios base address
  */
 u_int32_t *Nios_getBaseAddress();
+
+/** check kernel version against expected version string (complain if too old)
+ * @returns OK or FAIL */
+int Nios_checkKernelVersion(char *expectedVersion);

slsDetectorServers/slsDetectorServer/include/slsDetectorFunctionList.h

@@ -56,6 +56,9 @@ typedef struct udpStruct_s {
 int isInitCheckDone();
 int getInitResult(char **mess);
 void basictests();
+#if defined(MYTHEN3D) || defined(GOTTHARD2D)
+int checkKernelVersion();
+#endif
 #if defined(GOTTHARDD) || defined(JUNGFRAUD) || defined(CHIPTESTBOARDD) ||     \
     defined(MOENCHD) || defined(MYTHEN3D) || defined(GOTTHARD2D)
 int checkType();
@@ -554,7 +557,7 @@ int startStateMachine();
 void *start_timer(void *arg);
 #endif
 int stopStateMachine();
-#ifdef EIGERD
+#if defined(EIGERD) || defined(MYTHEN3D)
 int softwareTrigger();
 #endif
 

slsDetectorServers/slsDetectorServer/src/common.c

@@ -1,3 +1,4 @@
+#define _GNU_SOURCE // needed for strptime to be at the top
 #include "common.h"
 #include "clogger.h"
 #include "sls_detector_defs.h"
@@ -60,3 +61,12 @@ int getAbsPath(char *buf, size_t bufSize, char *fname) {
     LOG(logDEBUG1, ("full path for %s: %s\n", fname, buf));
     return OK;
 }
+
+int GetTimeFromString(char *buf, time_t *result) {
+    struct tm t;
+    if (NULL == strptime(buf, "%a %b %d %H:%M:%S %Z %Y", &t)) {
+        return FAIL;
+    }
+    *result = mktime(&t);
+    return OK;
+}

slsDetectorServers/slsDetectorServer/src/nios.c

@@ -2,10 +2,13 @@
 #include "RegisterDefs.h"
 #include "ansi.h"
 #include "clogger.h"
+#include "common.h"
 #include "sls_detector_defs.h"
 
 #include <fcntl.h> // open
+#include <string.h>
 #include <sys/mman.h>    // mmap
+#include <sys/utsname.h> // uname
 
 /* global variables */
 u_int32_t *csp0base = 0;
@@ -127,3 +130,49 @@ int mapCSP0(void) {
 }
 
 u_int32_t *Nios_getBaseAddress() { return csp0base; }
+
+int Nios_checkKernelVersion(char *expectedVersion) {
+    // extract kernel date string
+    struct utsname buf;
+    if (uname(&buf) == -1) {
+        LOG(logERROR, ("Could not get kernel version\n"));
+        return FAIL;
+    }
+
+    // remove first word (#version number)
+    const char *ptr = strchr(buf.version, ' ');
+    if (ptr == NULL) {
+        LOG(logERROR, ("Could not parse kernel version\n"));
+        return FAIL;
+    }
+    char output[256];
+    memset(output, 0, 256);
+    strcpy(output, buf.version + (ptr - buf.version + 1));
+
+    // convert kernel date string into time
+    time_t kernelDate;
+    if (GetTimeFromString(output, &kernelDate) == FAIL) {
+        LOG(logERROR, ("Could not parse retrieved kernel date, %s\n", output));
+        return FAIL;
+    }
+
+    // convert expected date into time
+    time_t expDate;
+    if (GetTimeFromString(expectedVersion, &expDate) == FAIL) {
+        LOG(logERROR,
+            ("Could not parse expected kernel date, %s\n", expectedVersion));
+        return FAIL;
+    }
+
+    // compare if kernel time is older than expected time
+    if (kernelDate < expDate) {
+        LOG(logERROR, ("Kernel Version Incompatible (too old)! Expected: [%s], "
+                       "Got [%s]\n",
+                       expectedVersion, output));
+        return FAIL;
+    }
+
+    LOG(logINFOBLUE, ("Kernel Version Compatible: %s [min.: %s]\n", output,
+                      expectedVersion));
+    return OK;
+}

slsDetectorServers/slsDetectorServer/src/slsDetectorServer.c

@@ -21,6 +21,7 @@ extern int ret;
 // Global variables from slsDetectorServer_funcs
 extern int sockfd;
 extern int debugflag;
+extern int updateFlag;
 extern int checkModuleFlag;
 
 // Global variables from slsDetectorFunctionList
@@ -41,6 +42,7 @@ int main(int argc, char *argv[]) {
     int portno = DEFAULT_PORTNO;
     isControlServer = 1;
     debugflag = 0;
+    updateFlag = 0;
     checkModuleFlag = 1;
     int version = 0;
 
@@ -53,10 +55,12 @@ int main(int argc, char *argv[]) {
         "Possible arguments are:\n"
         "\t-v, --version            : Software version\n"
         "\t-p, --port <port>        : TCP communication port with client. \n"
-        "\t-d, --devel              : Developer mode. Skips firmware checks. \n"
         "\t-g, --nomodule           : [Mythen3][Gotthard2] Generic or No "
         "Module mode. Skips detector type checks. \n"
         "\t-f, --phaseshift <value> : [Gotthard] only. Sets phase shift. \n"
+        "\t-d, --devel              : Developer mode. Skips firmware checks. \n"
+        "\t-u, --update             : Update mode. Skips firmware checks and "
+        "initial detector setup. \n"
         "\t-s, --stopserver         : Stop server. Do not use as created by "
         "control server \n\n",
         argv[0]);
@@ -68,9 +72,10 @@ int main(int argc, char *argv[]) {
         {"help", no_argument, NULL, 'h'},
         {"version", no_argument, NULL, 'v'},
         {"port", required_argument, NULL, 'p'},
-        {"devel", no_argument, NULL, 'd'},
         {"phaseshift", required_argument, NULL, 'f'},
         {"nomodule", no_argument, NULL, 'g'}, // generic
+        {"devel", no_argument, NULL, 'd'},
+        {"update", no_argument, NULL, 'u'},
         {"stopserver", no_argument, NULL, 's'},
         {NULL, 0, NULL, 0}};
 
@@ -80,7 +85,7 @@ int main(int argc, char *argv[]) {
     int c = 0;
 
     while (c != -1) {
-        c = getopt_long(argc, argv, "hvp:df:gs", long_options, &option_index);
+        c = getopt_long(argc, argv, "hvp:f:gdus", long_options, &option_index);
 
         // Detect the end of the options
         if (c == -1)
@@ -116,11 +121,6 @@ int main(int argc, char *argv[]) {
             LOG(logINFO, ("Detected port: %d\n", portno));
             break;
 
-        case 'd':
-            LOG(logINFO, ("Detected developer mode\n"));
-            debugflag = 1;
-            break;
-
         case 'f':
 #ifndef GOTTHARDD
             LOG(logERROR,
@@ -141,6 +141,16 @@ int main(int argc, char *argv[]) {
             checkModuleFlag = 0;
             break;
 
+        case 'd':
+            LOG(logINFO, ("Detected developer mode\n"));
+            debugflag = 1;
+            break;
+
+        case 'u':
+            LOG(logINFO, ("Detected update mode\n"));
+            updateFlag = 1;
+            break;
+
         case 's':
             LOG(logINFO, ("Detected stop server\n"));
             isControlServer = 0;

slsDetectorServers/slsDetectorServer/src/slsDetectorServer_funcs.c

@@ -42,6 +42,7 @@ extern char mess[MAX_STR_LENGTH];
 // Variables that will be exported
 int sockfd = 0;
 int debugflag = 0;
+int updateFlag = 0;
 int checkModuleFlag = 1;
 udpStruct udpDetails = {32410, 32411, 50001, 50002, 0, 0, 0, 0, 0, 0, 0, 0};
 int configured = FAIL;
@@ -4106,7 +4107,7 @@ int software_trigger(int file_des) {
     memset(mess, 0, sizeof(mess));
 
     LOG(logDEBUG1, ("Software Trigger\n"));
-#ifndef EIGERD
+#if !defined(EIGERD) && !defined(MYTHEN3D)
     functionNotImplemented();
 #else
     // only set

slsDetectorSoftware/include/Detector.h

@@ -231,9 +231,9 @@ class Detector {
     Result<defs::timingMode> getTimingMode(Positions pos = {}) const;
 
     /**
-     * [Gotthard][Jungfrau][CTB][Moench][Mythen3] Options:
+     * [Gotthard][Jungfrau][Gotthard][CTB][Moench][Gotthard2] Options:
-     * AUTO_TIMING, TRIGGER_EXPOSURE
+     * AUTO_TIMING, TRIGGER_EXPOSURE \n
-     * [Gotthard2] Options: AUTO_TIMING, TRIGGER_EXPOSURE, GATED, TRIGGER_GATED
+     * [Mythen3] Options: AUTO_TIMING, TRIGGER_EXPOSURE, GATED, TRIGGER_GATED \n
      * [Eiger] Options: AUTO_TIMING, TRIGGER_EXPOSURE, GATED, BURST_TRIGGER
      */
     void setTimingMode(defs::timingMode value, Positions pos = {});
@@ -354,21 +354,24 @@ class Detector {
 
     /**
      * (Degrees)
-     * [Gotthard] Options: TEMPERATURE_ADC, TEMPERATURE_FPGA
+     * [Gotthard] Options: TEMPERATURE_ADC, TEMPERATURE_FPGA \n
-     * [Jungfrau] Options: TEMPERATURE_ADC, TEMPERATURE_FPGA
+     * [Jungfrau] Options: TEMPERATURE_ADC, TEMPERATURE_FPGA \n
      * [Eiger] Options: TEMPERATURE_FPGA, TEMPERATURE_FPGAEXT, TEMPERATURE_10GE,
      * TEMPERATURE_DCDC, TEMPERATURE_SODL, TEMPERATURE_SODR, TEMPERATURE_FPGA2,
-     * TEMPERATURE_FPGA3
+     * TEMPERATURE_FPGA3 \n
-     * [CTB] Options: SLOW_ADC_TEMP
+     * Cannot call TEMPERATURE_FPGA2 and TEMPERATURE_FPGA3 when blocking acquire
+     * in progress \n [CTB] Options: SLOW_ADC_TEMP
      */
     Result<int> getTemperature(defs::dacIndex index, Positions pos = {}) const;
 
     /** gets list of dac enums for this detector */
     std::vector<defs::dacIndex> getDacList() const;
 
-    Result<int> getDAC(defs::dacIndex index, bool mV, Positions pos = {}) const;
+    Result<int> getDAC(defs::dacIndex index, bool mV = false,
+                       Positions pos = {}) const;
 
-    void setDAC(defs::dacIndex index, int value, bool mV, Positions pos = {});
+    void setDAC(defs::dacIndex index, int value, bool mV = false,
+                Positions pos = {});
 
     /* [Gotthard2] */
     Result<int> getOnChipDAC(defs::dacIndex index, int chipIndex,
@@ -457,7 +460,7 @@ class Detector {
      * numbers for different modules.*/
     void setStartingFrameNumber(uint64_t value, Positions pos = {});
 
-    /** [Eiger] Sends an internal software trigger to the detector */
+    /** [Eiger][Mythen3] Sends an internal software trigger to the detector */
     void sendSoftwareTrigger(Positions pos = {});
 
     Result<defs::scanParameters> getScan(Positions pos = {}) const;
@@ -850,7 +853,7 @@ class Detector {
     /** [Eiger] */
     Result<int> getThresholdEnergy(Positions pos = {}) const;
 
-    /** [Eiger] */
+    /** [Eiger] It loads trim files from settingspath */
     void setThresholdEnergy(int threshold_ev,
                             defs::detectorSettings settings = defs::STANDARD,
                             bool trimbits = true, Positions pos = {});
@@ -963,23 +966,24 @@ class Detector {
     /**
      * [Jungfrau]Set threshold temperature
      * If temperature crosses threshold temperature
-     * and temperature control is enabled,
+     * and temperature control is enabled (default is disabled), power to chip
-     * power to chip will be switched off and
+     * will be switched off and temperature event will be set. \n To power on
-     * temperature event will be set
+     * chip again, temperature has to be less than threshold temperature and
-     * val is value in degrees
+     * temperature event has to be cleared. val is value in degrees
      */
     void setThresholdTemperature(int temp, Positions pos = {});
 
     /** [Jungfrau] */
     Result<bool> getTemperatureControl(Positions pos = {}) const;
 
-    /** [Jungfrau] */
+    /** [Jungfrau]  refer to setThresholdTemperature
+     * Default is disabled */
     void setTemperatureControl(bool enable, Positions pos = {});
 
-    /** [Jungfrau] */
+    /** [Jungfrau] refer to setThresdholdTemperature */
     Result<int> getTemperatureEvent(Positions pos = {}) const;
 
-    /** [Jungfrau] */
+    /** [Jungfrau] refer to setThresdholdTemperature */
     void resetTemperatureEvent(Positions pos = {});
 
     /** [Jungfrau] */
@@ -1201,7 +1205,7 @@ class Detector {
     /** [CTB][Moench] */
     void setRUNClock(int value_in_MHz, Positions pos = {});
 
-    /** [CTB][Moench] */
+    /** [CTB][Moench]  in MHZ */
     Result<int> getSYNCClock(Positions pos = {}) const;
 
     /** [CTB][Moench] */
@@ -1396,7 +1400,7 @@ class Detector {
 
     /**************************************************
      *                                                *
-     *    Moench                                      *
+     *    Moench specific                             *
      *                                                *
      * ************************************************/
 
@@ -1423,29 +1427,6 @@ class Detector {
                                     const std::string &value,
                                     Positions pos = {});
 
-    /** [Moench] TODO! How do we do this best??? Can be refactored to something
-     * else? Use a generic zmq message passing system...
-     * For now limiting to all detectors working the same*/
-    /** [Moench: -1 if not found or cannot convert to int] */
-    Result<int> getDetectorMinMaxEnergyThreshold(const bool isEmax,
-                                                 Positions pos = {}) const;
-
-    /** [Moench] */
-    void setDetectorMinMaxEnergyThreshold(const bool isEmax, const int value,
-                                          Positions pos = {});
-
-    /** [Moench: -1 if unknown mode] */
-    Result<defs::frameModeType> getFrameMode(Positions pos = {}) const;
-
-    /** [Moench] */
-    void setFrameMode(defs::frameModeType value, Positions pos = {});
-
-    /** [Moench: -1 if unknown mode] */
-    Result<defs::detectorModeType> getDetectorMode(Positions pos = {}) const;
-
-    /** [Moench] */
-    void setDetectorMode(defs::detectorModeType value, Positions pos = {});
-
     /**************************************************
      *                                                *
      *    Advanced                                    *

slsDetectorSoftware/src/CmdProxy.cpp

@@ -670,7 +670,7 @@ std::string CmdProxy::ClockFrequency(int action) {
     std::ostringstream os;
     os << cmd << ' ';
     if (action == defs::HELP_ACTION) {
-        os << "[n_clock (0-8)] [freq_in_Hz]\n\t[Gotthard2][Mythen3] Frequency "
+        os << "[n_clock (0-5)] [freq_in_Hz]\n\t[Gotthard2][Mythen3] Frequency "
               "of clock n_clock in Hz. Use clkdiv to set frequency."
            << '\n';
     } else {
@@ -703,7 +703,7 @@ std::string CmdProxy::ClockPhase(int action) {
     std::ostringstream os;
     os << cmd << ' ';
     if (action == defs::HELP_ACTION) {
-        os << "[n_clock (0-8)] [phase] [deg "
+        os << "[n_clock (0-5)] [phase] [deg "
               "(optional)]\n\t[Gotthard2][Mythen3] Phase of clock n_clock. If "
               "deg, then phase shift in degrees, else absolute phase shift "
               "values."
@@ -756,7 +756,7 @@ std::string CmdProxy::MaxClockPhaseShift(int action) {
     std::ostringstream os;
     os << cmd << ' ';
     if (action == defs::HELP_ACTION) {
-        os << "[n_clock (0-8)]\n\t[Gotthard2][Mythen3] Absolute Maximum Phase "
+        os << "[n_clock (0-5)]\n\t[Gotthard2][Mythen3] Absolute Maximum Phase "
               "shift of clock n_clock."
            << '\n';
     } else {
@@ -785,7 +785,7 @@ std::string CmdProxy::ClockDivider(int action) {
     std::ostringstream os;
     os << cmd << ' ';
     if (action == defs::HELP_ACTION) {
-        os << "[n_clock (0-8)] [n_divider]\n\t[Gotthard2][Mythen3] Clock "
+        os << "[n_clock (0-5)] [n_divider]\n\t[Gotthard2][Mythen3] Clock "
               "Divider of clock n_clock. Must be greater than 1."
            << '\n';
     } else {
@@ -1222,7 +1222,8 @@ std::string CmdProxy::Threshold(int action) {
     if (action == defs::HELP_ACTION) {
         os << "[eV] [(optinal settings) standard, lowgain, veryhighgain, "
               "verylowgain]"
-              "\n\t[Eiger] Threshold in eV"
+              "\n\t[Eiger] Threshold in eV. It loads trim files from "
+              "settingspath."
            << '\n';
     } else if (action == defs::GET_ACTION) {
         if (!args.empty()) {
@@ -1957,21 +1958,17 @@ std::string CmdProxy::SlowAdc(int action) {
     std::ostringstream os;
     os << cmd << ' ';
     if (action == defs::HELP_ACTION) {
-        os << "[n_channel (0-7 for channel|8 for temperature)]\n\t[Ctb] Slow "
+        os << "[n_channel (0-7 for channel]\n\t[Ctb] Slow "
-              "ADC channel in mV or °C."
+              "ADC channel in mV"
            << '\n';
     } else if (action == defs::GET_ACTION) {
         if (args.size() != 1) {
             WrongNumberOfParameters(0);
         }
         int nchan = StringTo<int>(args[0]);
-        if (nchan < 0 || nchan > defs::SLOW_ADC_TEMP - defs::SLOW_ADC0) {
+        if (nchan < 0 || nchan > 7) {
             throw sls::RuntimeError("Unknown adc argument " + args[0]);
         }
-        if (nchan == 8) {
-            auto t = det->getTemperature(defs::SLOW_ADC_TEMP, {det_id});
-            os << OutString(t) << " °C\n";
-        } else {
         auto t = det->getSlowADC(
             static_cast<defs::dacIndex>(nchan + defs::SLOW_ADC0), {det_id});
         Result<double> result(t.size());
@@ -1979,7 +1976,7 @@ std::string CmdProxy::SlowAdc(int action) {
             result[i] = t[i] / 1000.00;
         }
         os << OutString(result) << " mV\n";
-        }
+
     } else if (action == defs::PUT_ACTION) {
         throw sls::RuntimeError("cannot put");
     } else {
@@ -2389,52 +2386,6 @@ std::string CmdProxy::JsonParameter(int action) {
     return os.str();
 }
 
-std::string CmdProxy::MinMaxEnergyThreshold(int action) {
-    std::ostringstream os;
-    os << cmd << ' ';
-    if (action == defs::HELP_ACTION) {
-        if (cmd == "emin") {
-            os << "[n_value]\n\t[Moench] Minimum energy threshold (soft "
-                  "setting) for processor."
-               << '\n';
-        } else if (cmd == "emax") {
-            os << "[n_value]\n\t[Moench] Maximum energy threshold (soft "
-                  "setting) for processor."
-               << '\n';
-        } else {
-            throw sls::RuntimeError(
-                "Unknown command, use list to list all commands");
-        }
-    } else {
-        bool emax = false;
-        if (cmd == "emin") {
-            emax = false;
-        } else if (cmd == "emax") {
-            emax = true;
-        } else {
-            throw sls::RuntimeError(
-                "Unknown command, use list to list all commands");
-        }
-        if (action == defs::GET_ACTION) {
-            if (!args.empty()) {
-                WrongNumberOfParameters(0);
-            }
-            auto t = det->getDetectorMinMaxEnergyThreshold(emax, {det_id});
-            os << OutString(t) << '\n';
-        } else if (action == defs::PUT_ACTION) {
-            if (args.size() != 1) {
-                WrongNumberOfParameters(1);
-            }
-            det->setDetectorMinMaxEnergyThreshold(emax, StringTo<int>(args[0]),
-                                                  {det_id});
-            os << args.front() << '\n';
-        } else {
-            throw sls::RuntimeError("Unknown action");
-        }
-    }
-    return os.str();
-}
-
 /* Advanced */
 
 std::string CmdProxy::ProgramFpga(int action) {

slsDetectorSoftware/src/CmdProxy.h

@@ -602,7 +602,9 @@ class CmdProxy {
         {"r_framesperfile", "rx_framesperfile"},
 
         /* ZMQ Streaming Parameters (Receiver<->Client) */
-        {"r_readfreq", "rx_readfreq"},
+        {"r_readfreq", "rx_zmqfreq"},
+        {"rx_readfreq", "rx_zmqfreq"},
+        {"rx_datastream", "rx_zmqstream"},
 
         /* Eiger Specific */
         {"trimdir", "settingspath"},
@@ -614,6 +616,7 @@ class CmdProxy {
         /* Gotthard2 Specific */
         /* Mythen3 Specific */
         /* CTB Specific */
+        {"adc", "slowadc"},
         {"flags", "romode"},
         {"i_a", "im_a"},
         {"i_b", "im_b"},
@@ -647,6 +650,7 @@ class CmdProxy {
         {"rx_version", &CmdProxy::rx_version},
         {"detectornumber", &CmdProxy::detectornumber},
         {"type", &CmdProxy::type},
+        {"nmod", &CmdProxy::nmod},
         {"detsize", &CmdProxy::DetectorSize},
         {"settingslist", &CmdProxy::settingslist},
         {"settings", &CmdProxy::settings},
@@ -836,8 +840,8 @@ class CmdProxy {
         {"rx_framesperfile", &CmdProxy::rx_framesperfile},
 
         /* ZMQ Streaming Parameters (Receiver<->Client) */
-        {"rx_datastream", &CmdProxy::rx_datastream},
+        {"rx_zmqstream", &CmdProxy::rx_zmqstream},
-        {"rx_readfreq", &CmdProxy::rx_readfreq},
+        {"rx_zmqfreq", &CmdProxy::rx_zmqfreq},
         {"rx_zmqstartfnum", &CmdProxy::rx_zmqstartfnum},
         {"rx_zmqport", &CmdProxy::rx_zmqport},
         {"zmqport", &CmdProxy::zmqport},
@@ -938,7 +942,7 @@ class CmdProxy {
         {"im_c", &CmdProxy::im_c},
         {"im_d", &CmdProxy::im_d},
         {"im_io", &CmdProxy::im_io},
-        {"adc", &CmdProxy::SlowAdc},
+        {"slowadc", &CmdProxy::SlowAdc},
         {"extsampling", &CmdProxy::extsampling},
         {"extsamplingsrc", &CmdProxy::extsamplingsrc},
         {"rx_dbitlist", &CmdProxy::ReceiverDbitList},
@@ -971,10 +975,6 @@ class CmdProxy {
         /* Moench */
         {"rx_jsonaddheader", &CmdProxy::AdditionalJsonHeader},
         {"rx_jsonpara", &CmdProxy::JsonParameter},
-        {"emin", &CmdProxy::MinMaxEnergyThreshold},
-        {"emax", &CmdProxy::MinMaxEnergyThreshold},
-        {"framemode", &CmdProxy::framemode},
-        {"detectormode", &CmdProxy::detectormode},
 
         /* Advanced */
         {"programfpga", &CmdProxy::ProgramFpga},
@@ -1091,7 +1091,6 @@ class CmdProxy {
     /* Moench */
     std::string AdditionalJsonHeader(int action);
     std::string JsonParameter(int action);
-    std::string MinMaxEnergyThreshold(int action);
     /* Advanced */
     std::string ProgramFpga(int action);
     std::string CopyDetectorServer(int action);
@@ -1128,6 +1127,8 @@ class CmdProxy {
     GET_COMMAND(type, getDetectorType,
                 "\n\tSerial number or MAC of detector (hex).");
 
+    GET_COMMAND_NOID(nmod, size, "\n\tNumber of modules in shared memory.");
+
     GET_COMMAND_NOID(settingslist, getSettingsList,
                      "\n\tList of settings implemented for this detector.");
 
@@ -1207,8 +1208,8 @@ class CmdProxy {
     INTEGER_COMMAND(timing, getTimingMode, setTimingMode,
                     sls::StringTo<slsDetectorDefs::timingMode>,
                     "[auto|trigger|gating|burst_trigger]\n\tTiming Mode of "
-                    "detector.\n\t[Jungfrau][Gotthard][Mythen3][Ctb][Moench] "
+                    "detector.\n\t[Jungfrau][Gotthard][Ctb][Moench][Gotthard2] "
-                    "[auto|trigger]\n\t[Gotthard2] "
+                    "[auto|trigger]\n\t[Mythen3] "
                     "[auto|trigger|gating|trigger_gating]\n\t[Eiger] "
                     "[auto|trigger|gating|burst_trigger]");
 
@@ -1287,11 +1288,13 @@ class CmdProxy {
 
     GET_IND_COMMAND(
         temp_fpgafl, getTemperature, slsDetectorDefs::TEMPERATURE_FPGA2, " °C",
-        "[n_value]\n\t[Eiger]Temperature of the left front end board fpga");
+        "[n_value]\n\t[Eiger]Temperature of the left front end board fpga. "
+        "Cannot call this while blocking acquire is going on.");
 
     GET_IND_COMMAND(
         temp_fpgafr, getTemperature, slsDetectorDefs::TEMPERATURE_FPGA3, " °C",
-        "[n_value]\n\t[Eiger]Temperature of the left front end board fpga");
+        "[n_value]\n\t[Eiger]Temperature of the left front end board fpga. "
+        "Cannot call this while blocking acquire is going on.");
 
     GET_IND_COMMAND(temp_slowadc, getTemperature,
                     slsDetectorDefs::SLOW_ADC_TEMP, " °C",
@@ -1638,7 +1641,7 @@ class CmdProxy {
 
     EXECUTE_SET_COMMAND(
         trigger, sendSoftwareTrigger,
-        "\n\t[Eiger] Sends software trigger signal to detector.");
+        "\n\t[Eiger][Mythen3] Sends software trigger signal to detector.");
 
     GET_COMMAND(scanerrmsg, getScanErrorMessage,
                 "\n\tGets Scan error message if scan ended in error for non "
@@ -1849,7 +1852,7 @@ class CmdProxy {
     /* ZMQ Streaming Parameters (Receiver<->Client) */
 
     INTEGER_COMMAND(
-        rx_datastream, getRxZmqDataStream, setRxZmqDataStream, StringTo<int>,
+        rx_zmqstream, getRxZmqDataStream, setRxZmqDataStream, StringTo<int>,
         "[0, 1]\n\tEnable/ disable data streaming from receiver via zmq (eg. "
         "to GUI or to another process for further processing). This creates/ "
         "destroys zmq streamer threads in receiver. \n\tSwitching to Gui "
@@ -1858,7 +1861,7 @@ class CmdProxy {
         "receiver for fast applications. ");
 
     INTEGER_COMMAND(
-        rx_readfreq, getRxZmqFrequency, setRxZmqFrequency, StringTo<int>,
+        rx_zmqfreq, getRxZmqFrequency, setRxZmqFrequency, StringTo<int>,
         "[nth frame]\n\tFrequency of frames streamed out from receiver via "
         "zmq\n\tDefault: 1, Means every frame is streamed out. \n\tIf 2, every "
         "second frame is streamed out. \n\tIf 0, streaming timer is the "
@@ -2209,17 +2212,6 @@ class CmdProxy {
                         "\n\t[Mythen3] Starts Pattern");
 
     /* Moench */
-
-    INTEGER_COMMAND(framemode, getFrameMode, setFrameMode,
-                    sls::StringTo<slsDetectorDefs::frameModeType>,
-                    "[pedestal|newpedestal|flatfield|newflatfield]\n\t[Moench] "
-                    "Frame mode (soft setting) in processor.");
-
-    INTEGER_COMMAND(detectormode, getDetectorMode, setDetectorMode,
-                    sls::StringTo<slsDetectorDefs::detectorModeType>,
-                    "[counting|interpolating|analog]\n\t[Moench] Detector mode "
-                    "(soft setting) in processor.");
-
     /* Advanced */
 
     EXECUTE_SET_COMMAND(resetfpga, resetFPGA,

slsDetectorSoftware/src/Detector.cpp

@@ -1840,71 +1840,6 @@ void Detector::setAdditionalJsonParameter(const std::string &key,
     pimpl->Parallel(&Module::setAdditionalJsonParameter, pos, key, value);
 }
 
-Result<int> Detector::getDetectorMinMaxEnergyThreshold(const bool isEmax,
-                                                       Positions pos) const {
-    auto res = pimpl->Parallel(&Module::getAdditionalJsonParameter, pos,
-                               isEmax ? "emax" : "emin");
-    Result<int> intResult(res.size());
-    try {
-        for (unsigned int i = 0; i < res.size(); ++i) {
-            intResult[i] = stoi(res[i]);
-        }
-    } catch (...) {
-        throw RuntimeError(
-            "Cannot find or convert emin/emax string to integer");
-    }
-    return intResult;
-}
-
-void Detector::setDetectorMinMaxEnergyThreshold(const bool isEmax,
-                                                const int value,
-                                                Positions pos) {
-    pimpl->Parallel(&Module::setAdditionalJsonParameter, pos,
-                    isEmax ? "emax" : "emin", std::to_string(value));
-}
-
-Result<defs::frameModeType> Detector::getFrameMode(Positions pos) const {
-    auto res =
-        pimpl->Parallel(&Module::getAdditionalJsonParameter, pos, "frameMode");
-    Result<defs::frameModeType> intResult(res.size());
-    try {
-        for (unsigned int i = 0; i < res.size(); ++i) {
-            intResult[i] =
-                sls::StringTo<slsDetectorDefs::frameModeType>(res[i]);
-        }
-    } catch (...) {
-        throw RuntimeError(
-            "Cannot find or convert frameMode string to integer");
-    }
-    return intResult;
-}
-
-void Detector::setFrameMode(defs::frameModeType value, Positions pos) {
-    pimpl->Parallel(&Module::setAdditionalJsonParameter, pos, "frameMode",
-                    sls::ToString(value));
-}
-
-Result<defs::detectorModeType> Detector::getDetectorMode(Positions pos) const {
-    auto res = pimpl->Parallel(&Module::getAdditionalJsonParameter, pos,
-                               "detectorMode");
-    Result<defs::detectorModeType> intResult(res.size());
-    try {
-        for (unsigned int i = 0; i < res.size(); ++i) {
-            intResult[i] =
-                sls::StringTo<slsDetectorDefs::detectorModeType>(res[i]);
-        }
-    } catch (...) {
-        throw RuntimeError(
-            "Cannot find or convert detectorMode string to integer");
-    }
-    return intResult;
-}
-
-void Detector::setDetectorMode(defs::detectorModeType value, Positions pos) {
-    pimpl->Parallel(&Module::setAdditionalJsonParameter, pos, "detectorMode",
-                    sls::ToString(value));
-}
-
 // Advanced
 
 void Detector::programFPGA(const std::string &fname, Positions pos) {

slsDetectorSoftware/src/Module.cpp

@@ -357,6 +357,10 @@ void Module::setImageTestMode(const int value) {
 }
 
 int Module::getADC(dacIndex index) const {
+    // cannot access fpga links simultaneously (eiger) temp fix
+    if (index == TEMPERATURE_FPGA2 || index == TEMPERATURE_FPGA3) {
+        return sendToDetector<int>(F_GET_ADC, index);
+    }
     return sendToDetectorStop<int>(F_GET_ADC, index);
 }
 
@@ -792,13 +796,6 @@ void Module::setReceiverHostname(const std::string &receiverIP) {
 
     shm()->numUDPInterfaces = retval.udpInterfaces;
 
-    if (shm()->myDetectorType == MOENCH) {
-        setAdditionalJsonParameter("adcmask_1g",
-                                   std::to_string(retval.adcMask));
-        setAdditionalJsonParameter("adcmask_10g",
-                                   std::to_string(retval.adc10gMask));
-    }
-
     // to use rx_hostname if empty and also update client zmqip
     updateReceiverStreamingIP();
 }
@@ -1073,19 +1070,6 @@ void Module::setSubDeadTime(int64_t value) {
 }
 
 int Module::getThresholdEnergy() const {
-    // moench - get threshold energy from json header
-    if (shm()->myDetectorType == MOENCH) {
-        getAdditionalJsonHeader();
-        std::string result = getAdditionalJsonParameter("threshold");
-        // convert to integer
-        try {
-            return std::stoi(result);
-        }
-        // not found or cannot scan integer
-        catch (...) {
-            return -1;
-        }
-    }
     return sendToDetector<int>(F_GET_THRESHOLD_ENERGY);
 }
 
@@ -1097,10 +1081,6 @@ void Module::setThresholdEnergy(int e_eV, detectorSettings isettings,
         if (shm()->useReceiverFlag) {
             sendToReceiver(F_RECEIVER_SET_THRESHOLD, e_eV, nullptr);
         }
-    }
-    // moench - send threshold energy to processor
-    else if (shm()->myDetectorType == MOENCH) {
-        setAdditionalJsonParameter("threshold", std::to_string(e_eV));
     } else {
         throw RuntimeError(
             "Set threshold energy not implemented for this detector");
@@ -1789,10 +1769,6 @@ void Module::setADCEnableMask(uint32_t mask) {
     // update #nchan, as it depends on #samples, adcmask,
     updateNumberOfChannels();
 
-    // send to processor
-    if (shm()->myDetectorType == MOENCH)
-        setAdditionalJsonParameter("adcmask_1g", std::to_string(mask));
-
     if (shm()->useReceiverFlag) {
         sendToReceiver<int>(F_RECEIVER_SET_ADC_MASK, mask);
     }
@@ -1806,10 +1782,6 @@ void Module::setTenGigaADCEnableMask(uint32_t mask) {
     sendToDetector(F_SET_ADC_ENABLE_MASK_10G, mask, nullptr);
     updateNumberOfChannels(); // depends on samples and adcmask
 
-    // send to processor
-    if (shm()->myDetectorType == MOENCH)
-        setAdditionalJsonParameter("adcmask_10g", std::to_string(mask));
-
     if (shm()->useReceiverFlag) {
         sendToReceiver<int>(F_RECEIVER_SET_ADC_MASK_10G, mask);
     }

slsDetectorSoftware/tests/test-CmdProxy-rx.cpp

@@ -574,25 +574,25 @@ TEST_CASE("rx_framesperfile", "[.cmd][.rx][.new]") {
 
 /* ZMQ Streaming Parameters (Receiver<->Client) */
 
-TEST_CASE("rx_datastream", "[.cmd][.rx][.new]") {
+TEST_CASE("rx_zmqstream", "[.cmd][.rx][.new]") {
     Detector det;
     CmdProxy proxy(&det);
     auto prev_val = det.getRxZmqDataStream();
     {
         std::ostringstream oss;
-        proxy.Call("rx_datastream", {"1"}, -1, PUT, oss);
+        proxy.Call("rx_zmqstream", {"1"}, -1, PUT, oss);
-        REQUIRE(oss.str() == "rx_datastream 1\n");
+        REQUIRE(oss.str() == "rx_zmqstream 1\n");
         REQUIRE(det.getRxZmqDataStream().squash() == true);
     }
     {
         std::ostringstream oss;
-        proxy.Call("rx_datastream", {}, -1, GET, oss);
+        proxy.Call("rx_zmqstream", {}, -1, GET, oss);
-        REQUIRE(oss.str() == "rx_datastream 1\n");
+        REQUIRE(oss.str() == "rx_zmqstream 1\n");
     }
     {
         std::ostringstream oss;
-        proxy.Call("rx_datastream", {"0"}, -1, PUT, oss);
+        proxy.Call("rx_zmqstream", {"0"}, -1, PUT, oss);
-        REQUIRE(oss.str() == "rx_datastream 0\n");
+        REQUIRE(oss.str() == "rx_zmqstream 0\n");
         REQUIRE(det.getRxZmqDataStream().squash() == false);
     }
     for (int i = 0; i != det.size(); ++i) {
@@ -600,24 +600,24 @@ TEST_CASE("rx_datastream", "[.cmd][.rx][.new]") {
     }
 }
 
-TEST_CASE("rx_readfreq", "[.cmd][.rx][.new]") {
+TEST_CASE("rx_zmqfreq", "[.cmd][.rx][.new]") {
     Detector det;
     CmdProxy proxy(&det);
     auto prev_val = det.getRxZmqFrequency();
     {
         std::ostringstream oss;
-        proxy.Call("rx_readfreq", {"1"}, -1, PUT, oss);
+        proxy.Call("rx_zmqfreq", {"1"}, -1, PUT, oss);
-        REQUIRE(oss.str() == "rx_readfreq 1\n");
+        REQUIRE(oss.str() == "rx_zmqfreq 1\n");
     }
     {
         std::ostringstream oss;
-        proxy.Call("rx_readfreq", {}, -1, GET, oss);
+        proxy.Call("rx_zmqfreq", {}, -1, GET, oss);
-        REQUIRE(oss.str() == "rx_readfreq 1\n");
+        REQUIRE(oss.str() == "rx_zmqfreq 1\n");
     }
     {
         std::ostringstream oss;
-        proxy.Call("rx_readfreq", {"0"}, -1, PUT, oss);
+        proxy.Call("rx_zmqfreq", {"0"}, -1, PUT, oss);
-        REQUIRE(oss.str() == "rx_readfreq 0\n");
+        REQUIRE(oss.str() == "rx_zmqfreq 0\n");
     }
     for (int i = 0; i != det.size(); ++i) {
         det.setRxZmqFrequency(prev_val[i], {i});

slsSupportLib/include/ToString.h

@@ -32,8 +32,6 @@ std::string ToString(const defs::frameDiscardPolicy s);
 std::string ToString(const defs::fileFormat s);
 std::string ToString(const defs::externalSignalFlag s);
 std::string ToString(const defs::readoutMode s);
-std::string ToString(const defs::frameModeType s);
-std::string ToString(const defs::detectorModeType s);
 std::string ToString(const defs::dacIndex s);
 std::string ToString(const std::vector<defs::dacIndex> &vec);
 std::string ToString(const defs::burstMode s);
@@ -283,8 +281,6 @@ template <> defs::frameDiscardPolicy StringTo(const std::string &s);
 template <> defs::fileFormat StringTo(const std::string &s);
 template <> defs::externalSignalFlag StringTo(const std::string &s);
 template <> defs::readoutMode StringTo(const std::string &s);
-template <> defs::frameModeType StringTo(const std::string &s);
-template <> defs::detectorModeType StringTo(const std::string &s);
 template <> defs::dacIndex StringTo(const std::string &s);
 template <> defs::burstMode StringTo(const std::string &s);
 template <> defs::timingSourceType StringTo(const std::string &s);

slsSupportLib/include/sls_detector_defs.h

@@ -377,16 +377,6 @@ typedef struct {
     /** hierarchy in multi-detector structure, if any */
     enum masterFlags { NO_MASTER, IS_MASTER, IS_SLAVE };
 
-    /**
-     * frame mode for processor
-     */
-    enum frameModeType { PEDESTAL, NEW_PEDESTAL, FLATFIELD, NEW_FLATFIELD };
-
-    /**
-     * detector mode for processor
-     */
-    enum detectorModeType { COUNTING, INTERPOLATING, ANALOG };
-
     /**
      * burst mode for gotthard2
      */

slsSupportLib/include/versionAPI.h

@@ -3,11 +3,11 @@
 #define APILIB       0x200810
 #define APIRECEIVER  0x200810
 #define APIGUI       0x200804
-#define APICTB 0x200909
-#define APIGOTTHARD 0x200909
-#define APIGOTTHARD2 0x200909
-#define APIJUNGFRAU 0x200909
-#define APIMOENCH 0x200909
-#define APIEIGER 0x200909
 
-#define APIMYTHEN3 0x200909
+#define APICTB 0x200910
+#define APIGOTTHARD 0x200910
+#define APIJUNGFRAU 0x200910
+#define APIMOENCH 0x200910
+#define APIEIGER 0x200910
+#define APIGOTTHARD2 0x200910
+#define APIMYTHEN3 0x200910

slsSupportLib/src/ToString.cpp

@@ -325,34 +325,6 @@ std::string ToString(const defs::readoutMode s) {
     }
 }
 
-std::string ToString(const defs::frameModeType s) {
-    switch (s) {
-    case defs::PEDESTAL:
-        return std::string("pedestal");
-    case defs::NEW_PEDESTAL:
-        return std::string("newpedestal");
-    case defs::FLATFIELD:
-        return std::string("flatfield");
-    case defs::NEW_FLATFIELD:
-        return std::string("newflatfield");
-    default:
-        return std::string("Unknown");
-    }
-}
-
-std::string ToString(const defs::detectorModeType s) {
-    switch (s) {
-    case defs::COUNTING:
-        return std::string("counting");
-    case defs::INTERPOLATING:
-        return std::string("interpolating");
-    case defs::ANALOG:
-        return std::string("analog");
-    default:
-        return std::string("Unknown");
-    }
-}
-
 std::string ToString(const defs::dacIndex s) {
     switch (s) {
     case defs::DAC_0:
@@ -713,28 +685,6 @@ template <> defs::readoutMode StringTo(const std::string &s) {
     throw sls::RuntimeError("Unknown readout mode " + s);
 }
 
-template <> defs::frameModeType StringTo(const std::string &s) {
-    if (s == "pedestal")
-        return defs::PEDESTAL;
-    if (s == "newpedestal")
-        return defs::NEW_PEDESTAL;
-    if (s == "flatfield")
-        return defs::FLATFIELD;
-    if (s == "newflatfield")
-        return defs::NEW_FLATFIELD;
-    throw sls::RuntimeError("Unknown frame mode " + s);
-}
-
-template <> defs::detectorModeType StringTo(const std::string &s) {
-    if (s == "counting")
-        return defs::COUNTING;
-    if (s == "interpolating")
-        return defs::INTERPOLATING;
-    if (s == "analog")
-        return defs::ANALOG;
-    throw sls::RuntimeError("Unknown detector mode " + s);
-}
-
 template <> defs::dacIndex StringTo(const std::string &s) {
     if (s == "dac 0")
         return defs::DAC_0;