* updated registers, arm64
* compiler set to aarch64 for xilinx server
* updated RegisterDefs.h
* merge into generate branch and resolving conflicts and adding the xilinx changes to callerspecial and commands.yaml
* compiles and can print firmware version (using a different csp0 address)
* fixing other servers (gotthard, jungfrau, moench, mythen3) that it returns in case of mapping failure, xilinxctb: added that it checks type, prints proper fw version, checks kernel date, added armprocessor define to use in common places, added specifiers to supress overflow and truncation warnings
* added detector ip and mac adddress to the printout
* fixed tests and recompiled servers
* transceiverenable, tsamples, romode for tranceiver and digital_transceiver
* 202 spec instr only for transceiver mode
* removed check for empty in trans readout and clean memory before reading from fifo
* ctb read fifo strobe for all after reading all channels, adding 1us after selecting channel, changing fw date
* updated 10gb transceiver enable
----
* added transceiver (tsamples, romode(transceiver, digital_transceiver), transceiverenable (mask)
* clean memory before reading from fifo (for analog and digital as well)
* read fifo then read strobe (also corresp fw) fixes number of reads (also for analg and digital)-> increases all pipelines by 1
* fixed bug in rearranging digital data in receiver
* fixed bug in streaming size of data after rearranging
* fixed bug in setbit, clearbit,and getbit
* status checks fifo before returning idle (transmitting if data in fifo if transceiver more enabled)
* soem matterhorn specifics that will need to be put into pattern in a month or two. this is temporary.
* NOTE: breaking api. rxParameters struct has transceiverenabel and tsamples given from det to receiver
* roi structure expanded to have ymin and ymax
* compile with 'detector roi'
* wip
* wip, rx_roi, rx_clearroi
* wip rxroi
* rxroi wip
* wip rxroi
* merge fix
* wip
* rx_roi works, impl wip, test
* tests in, impl left
* wip, rxroi impl
* wip, rxroi impl
* wip
* setrx_Roi works, getrx_roi, wip
* rx_roi impl done
* wip, rxroi
* wip, getrx_roi rxr ports
* fix ports
* wip
* wip
* fix positions on server side
* wip
* numports wip
* wip
* jungfrau top inner interface row increment
* x, y detpos, wip
* removed eiger row indices flipping in gui (bottom flipping maintained)
* wip
* wip, jungfrau numinterfaces2
* jungfrau virtual works
* eiger, jungfrau, g2 virtual server works
* eiger positions fix, wip
* binaries in
* minor printout
* binaries in
* merge fix
* merge fix
* removing getposition
* setrxroi wip
* set upto port
* get messed, wip
* roi multi to module works, wip
* wip
* roi dont return -1
* added rxroi metadata in master file
* added rxroifromshm, not yet in detector
* rx roi in gui with box, also for gap pixels (gappixels for jungfrau mess)
* fix for segfault in gui with detaching roi box in gui
* wip
* m3 gui: slave timing modes should be discarded when squashing
* fixed m3 virtual data, and fixed counters in gui asthetics
* m3 roi works
* wip, g2
* wip
* handling g225um boards, and showing roi for gainplot as well
* udpate python functions
* fix for 1d and a2d roi written
* fixed actual roi written to file
* no virtual hdf5 when handling rx roi
* test
* minor
* binarie in
* wip, adding m3 functions: polarity, inerpolation, pumpprobe
* added interpol, polarity, pump probe, analog pulsing, digital pulsing
* tests
* binaries in
* update release
* added python polarity enum
* fixed python and minor readability in mythen3.c
* binarie sin
* added all the m3 funcs also in list.c and enablingall counters for enabling interpolation
* binarie sin
* Setting pattern from memory (#218)
* ToString accepts c-style arrays
* fixed patwait time bug in validation
* Introduced pattern class
* compile for servers too
* Python binding for Pattern
* added scanParameters in Python
* slsReceiver: avoid potential memory leak around Implementation::generalData
* additional constructors for scanPrameters in python
* bugfix: avoid potentital memory leak in receiver if called outside constructor context
* added scanParameters in Python
* additional constructors for scanPrameters in python
* M3defaultpattern (#227)
* default pattern for m3 and moench including Python bindings
* M3settings (#228)
* some changes to compile on RH7 and in the server to load the default chip status register at startup
* Updated mythen3DeectorServer_developer executable with correct initialization at startup
Co-authored-by: Erik Frojdh <erik.frojdh@gmail.com>
Co-authored-by: Anna Bergamaschi <anna.bergamaschi@psi.ch>
* Pattern.h as a public header files (#229)
* fixed buffer overflow but caused by using global instead of local enum
* replacing out of range trimbits with edge values
* replacing dac values that are out of range after interpolation
* updated pybind11 to 2.6.2
* Mythen3 improved synchronization (#231)
Disabling scans for multi module Mythen3, since there is no feedback of the detectors being ready
startDetector first starts the slaves then the master
acquire firs calls startDetector for the slaves then acquire on the master
getMaster to read back from hardware which one is master
* New server for JF to go with the new FW (#232)
* Modified Jungfrau speed settings for HW1.0 - FW fix version 1.1.1, compilation date 210218
* Corrected bug. DBIT clk phase is implemented in both HW version 1.0 and 2.0. Previous version did not update the DBIT phase shift on the configuration of a speed.
* fix for m3 scan with single module
* m3 fw version
* m3 server
* bugfix for bottom when setting quad
* new strategy for finding zmq based on cppzmq
Co-authored-by: Dhanya Thattil <dhanya.thattil@psi.ch>
Co-authored-by: Dhanya Thattil <33750417+thattil@users.noreply.github.com>
Co-authored-by: Alejandro Homs Puron <ahoms@esrf.fr>
Co-authored-by: Anna Bergamaschi <anna.bergamaschi@psi.ch>
Co-authored-by: Xiaoqiang Wang <xiaoqiangwang@gmail.com>
Co-authored-by: lopez_c <carlos.lopez-cuenca@psi.ch>
