* added none or 0 to unset bad channels
* free function split to get int array from string of arguments for badchannels
* missed a file
* allowing list for badchannels in command line
* added badchannels in python
* added size check
* more comments in Detector.h and added more tests for facny command line badchannels
* removeDuplicates accept any container, added tests
* corner cases: 1:5,6,7 or 5,6,7 or just 1:5
Co-authored-by: Erik Frojdh <erik.frojdh@gmail.com>
* badchannels for m3 and modify for g2 (file from single and multi)
* m3: invert polarity of bit 7 and 11 signals from setmodule, allow commas in bad channel file
* badchannel file can take commas, colons and comments (also taking care of spaces at the end of channel numbers)
* tests 'badchannels' and 'Channel file reading' added, removing duplicates in badchannel list, defining macro for num counters in client side
* fix segfault when list from file is empty,
* fix tests assertion for ctbconfig (adding message) for c++11
* fixed badchannels in m3server (clocking in trimming)
* badchannel tests can be run from any folder (finds the file)
* roi structure expanded to have ymin and ymax
* compile with 'detector roi'
* wip
* wip, rx_roi, rx_clearroi
* wip rxroi
* rxroi wip
* wip rxroi
* merge fix
* wip
* rx_roi works, impl wip, test
* tests in, impl left
* wip, rxroi impl
* wip, rxroi impl
* wip
* setrx_Roi works, getrx_roi, wip
* rx_roi impl done
* wip, rxroi
* wip, getrx_roi rxr ports
* fix ports
* wip
* wip
* fix positions on server side
* wip
* numports wip
* wip
* jungfrau top inner interface row increment
* x, y detpos, wip
* removed eiger row indices flipping in gui (bottom flipping maintained)
* wip
* wip, jungfrau numinterfaces2
* jungfrau virtual works
* eiger, jungfrau, g2 virtual server works
* eiger positions fix, wip
* binaries in
* minor printout
* binaries in
* merge fix
* merge fix
* removing getposition
* setrxroi wip
* set upto port
* get messed, wip
* roi multi to module works, wip
* wip
* roi dont return -1
* added rxroi metadata in master file
* added rxroifromshm, not yet in detector
* rx roi in gui with box, also for gap pixels (gappixels for jungfrau mess)
* fix for segfault in gui with detaching roi box in gui
* wip
* m3 gui: slave timing modes should be discarded when squashing
* fixed m3 virtual data, and fixed counters in gui asthetics
* m3 roi works
* wip, g2
* wip
* handling g225um boards, and showing roi for gainplot as well
* udpate python functions
* fix for 1d and a2d roi written
* fixed actual roi written to file
* no virtual hdf5 when handling rx roi
* test
* minor
* binarie in
Fixed by checking for help action before using the detector
added test that checks that for all helps this doesn't crash
Disabled Timer tests by default since they take ~2s
* Setting pattern from memory (#218)
* ToString accepts c-style arrays
* fixed patwait time bug in validation
* Introduced pattern class
* compile for servers too
* Python binding for Pattern
* added scanParameters in Python
* slsReceiver: avoid potential memory leak around Implementation::generalData
* additional constructors for scanPrameters in python
* bugfix: avoid potentital memory leak in receiver if called outside constructor context
* added scanParameters in Python
* additional constructors for scanPrameters in python
* M3defaultpattern (#227)
* default pattern for m3 and moench including Python bindings
* M3settings (#228)
* some changes to compile on RH7 and in the server to load the default chip status register at startup
* Updated mythen3DeectorServer_developer executable with correct initialization at startup
Co-authored-by: Erik Frojdh <erik.frojdh@gmail.com>
Co-authored-by: Anna Bergamaschi <anna.bergamaschi@psi.ch>
* Pattern.h as a public header files (#229)
* fixed buffer overflow but caused by using global instead of local enum
* replacing out of range trimbits with edge values
* replacing dac values that are out of range after interpolation
* updated pybind11 to 2.6.2
* Mythen3 improved synchronization (#231)
Disabling scans for multi module Mythen3, since there is no feedback of the detectors being ready
startDetector first starts the slaves then the master
acquire firs calls startDetector for the slaves then acquire on the master
getMaster to read back from hardware which one is master
* New server for JF to go with the new FW (#232)
* Modified Jungfrau speed settings for HW1.0 - FW fix version 1.1.1, compilation date 210218
* Corrected bug. DBIT clk phase is implemented in both HW version 1.0 and 2.0. Previous version did not update the DBIT phase shift on the configuration of a speed.
* fix for m3 scan with single module
* m3 fw version
* m3 server
* bugfix for bottom when setting quad
* new strategy for finding zmq based on cppzmq
Co-authored-by: Dhanya Thattil <dhanya.thattil@psi.ch>
Co-authored-by: Dhanya Thattil <33750417+thattil@users.noreply.github.com>
Co-authored-by: Alejandro Homs Puron <ahoms@esrf.fr>
Co-authored-by: Anna Bergamaschi <anna.bergamaschi@psi.ch>
Co-authored-by: Xiaoqiang Wang <xiaoqiangwang@gmail.com>
Co-authored-by: lopez_c <carlos.lopez-cuenca@psi.ch>
* added temp m3 settings files
* renames settings noise to trim
* get threshold for M3
* some changes to compile on RH7 and in the server to load the default chip status register at startup
* Updated mythen3DeectorServer_developer executable with correct initialization at startup
Co-authored-by: Erik Frojdh <erik.frojdh@gmail.com>
Co-authored-by: Anna Bergamaschi <anna.bergamaschi@psi.ch>
* ToString accepts c-style arrays
* added patternParameters to python
* fixed patwait time bug in validation
* moved load from file function to patterParameters
* server using patternparamters structure to get pattern
Co-authored-by: Erik Frojdh <erik.frojdh@gmail.com>
Changed data type of address from char[1000] to string to reduce stack size of object.
Removed redundant calls to Close
Removed function exposing the socket descriptor
Using functions from network_utils instead of duplicates
Added tests
