* remove the check for localhost being used in rx_hostname for python test for simulators, run rx_arping test only if hostname is not 'localhost'
* fix tests for fpath: cannot set back to empty anymore (empty is default)
* default rx_hostname arg = localhost, and default settings path =../../settingsdir
* changed virtual tests script for better printout on exceptions
* fix for catching generaltests exceptions and exiting instead of continuing
* fix minor
* fixed shared memeory tests to include current env and fixed prints for errors
---------
Co-authored-by: Erik Fröjdh <erik.frojdh@gmail.com>
* slsSupportLib done, at receiver rooting out in implementation
* removed from receiver and client
* removed everywhere except gui, python and client(commands.yaml and Detector.h)
* updated python
* fixed autocomplete to print what the issue is if there is one with ToString when running the autocomplete script to generate fixed.json. updated readme.md in generator folder
* formatting
* removed enums for dacs
* udpating autocomplete and generating commands
* removed gotthard from docs and release notes
* removed dac test
* bug from removing g1
* fixed virtual test for xilinx, was minor. so in this PR
* gui done
* binary in merge fix
* formatting and removing enums
* updated fixed and dump.json
* bash autocomplete
* updated doc on command line generation
* removing increments in dac enums for backward compatibility. Not required
* removed ROI from rxParameters (only in g1), not needed to be backward compatible
* removed the phase shift option from det server staruip
* jf: rolling back firmware required to v1.5 and 2.5, updated release notes, fixed a bug when updating server (when server name same as link name:throws with no message, pedestal mode check changed for the time being for loops to be 0xFF size
* compensating for jf fw bug for pedestalmode where loops should be 16 bit, but is 8 bit in fw. to be fixed in next version
* formatting
* formatting, merge fix
* fixed python test simulator to kill previous servers
* rmeoved merge binary
* period and exptime(patternwaittime level 0)
* added new regsieterdefs and updated api version and fixedpattern reg
* autogenerate commands
* formatting
* minor
* wip resetflow, readout mode, transceiver mask, transceiver enable
* acquisition, but streaming done bit and busy (exposing + read chip to fifo) not known yet from fw
* programming fpga and device tree done
* most configuration done, need to connect configuretransceiver to client
* stuck at resetting transciever timed out
* minor
* fixed virtual, added chip busyto fifo, streaming busy, set/getnext framenumber
* configuretransceiver from client, added help in client
* make formatt and command generation
* tests for xilinx ctb works
* command generation
* dacs added and tested, power not done
* power added
* added temp_fpga
* binaries in
* ctrlreg is 0 to enable chip=fixed, high dac val = min val= fixed, power regulators in weird order=fixed, device tree could be loaded with dacs before adcs=fixed
* start works
* virtual server sends
* receiver works
* tests
* python function and enum generation, commands generatorn and autocomplete, formatting, tests
* tests fail at start(transceiver not aligned)
* tests passed
* all binaries compiled
* eiger binary in
* added --nomodule cehck for xilinx
* implemented testbus, testfpga, set/get #frames, triggers, allowed that and for connection to client, also allowed, getnumchannels, configuremac, getrunstatus, setdetectorposition with dummy values
* allowing tests for xilinx
* binaries in
* commands code generation (#803)
* commands code generation for only frames command
* fix cmake file and add Caller files
* working exptime, fully extended commands file and its variants
* start adding template commands
* add INT_CMD_VEC_ID template
* add list command, generate multiple bins, format code
* reach 208 commands using the cpp macros
* add tests for command parser
* start adding tests for commands parser
* fix typo to use commands.yaml
* add more tests for command_parser
* add all template functions (up to 218 commands)
* finish template functions and add more CmdProxy.cpp functions (250+)
* 257 commands
* 300 commands the rest are very special commands
* add special commands without generation
* separate special functions from generated c++ file
* implementing one command for put and get (buggy)
* add infer action in a separate file
* generate header for special commands from yaml
* allow only 0 or 1 for bool inputs
* group all commands in gen_commands.py
* add help to gen_commands.py
* add autocomplete bash script
* autocompletion: add support for module levels and help
* remove debugging line
* add autocompletion, help to commands, change int [0,1] to bool
* copy tests for Caller.cpp. Tests pass
* update with the new developer branch changes
* fix errors after merging (there is problems with tests)
* fixed port/stopport in yaml (intput typo), added '_caller' to the test dac and test on chip dac command in global test for cmdcaller
* undo previous test simulator debug change
* add documentation for the generated code
* reducing the comment to be replaced in length so formatting does not split into 2 lines
* removed formatting specific style of C++11 in gen_commands.py to keep with the top level clang format of the project
* regeneratign code for commands
* automation generated
* Redirect deprecated commands (#872)
* working implementation, need to fix dac
* fixed deprecation redirect for dac command
* Detector specific autocomplete (#873)
* working implementation, need to fix dac
* fixed deprecation redirect for dac command
* detector specific completion for dac
* added autocomplete using detector specific
* fixed error when autocompleting partial words
* Generate commands/fix commands (#875)
* fix vm_a, im_a etc have deg Celsius suffix, also help missing or changed in some places
* dac: require det id for all, arg0 to be printed at output, help for onchip dac and dac, onchipdac: spacing
* getscan detid and blocking trigger help
* udp_Dstlist det_id fixed, but rx_id invalid
* cmdApp in line with cmdLineApp (missing version, receiver_id, not creating det object in help action
* added set_command to differentiate between check_det_id and require_det_id (mixed up), args: -1 needs to check for at least one argument
* reordering
* reordering and checked till integer_command_hex
* fixed a lot more commands
* fix caller tests for eiger
* changes to tests after Bechir left
* changing .cmd to .cmdcall for the caller commands
* fixed tests for caller, still warning for setexptime about cast input
* autocomplete ran
* add moench test
* regenerating autocomplete and commands
* fixing other things from merge conflicts (renaming slsDetectorDefs to defs in commands.yaml)
* formatting
* added code injection to help (#876)
* updated 3 commands to have get output that can be put into put (#877)
* updated some commands to have get output that can be put into put
* fix tests for clkdiv
* adding help to free (#878)
* removing old commands and renaming them, (also making it work for parameters command as it was still calling cmdproxy) (#879)
* More helpful error messages for unsupported actions (#880)
* removing old commands and renaming them, (also making it work for parameters command as it was still calling cmdproxy)
* Added specific help for unsupported actions
* fixed a vetofile get special exception message. more specific warning for special exception message instead of no function warning
* added condition checking true in exceptions for special message
---------
Co-authored-by: Bechir Brahem <bachbrahem@gmail.com>
Co-authored-by: Erik Frojdh <erik.frojdh@gmail.com>
Co-authored-by: Dhanya Thattil <dhanya.thattil@psi.ch>
* draft to fix virtual test when it fails
* catching errors in tests and removing sigchild ignore so servers (process in background) executing commands will not fail (pclose no child processes, if sigchld is ignored) fixed
* uncommented python loading config
* somehow killal slsReciever in second detector test fails even though no receiver running
* fixing script for virtual simlator test:fixed issue with check if process running, fixed moench tests
* using argparse for parsing command line arguments
* added command line option to specify which servers to run
---------
Co-authored-by: Erik Fröjdh <erik.frojdh@gmail.com>
