* wip: draft of frame synchronizer, semaphores not done yet
* signal handler not affecting semaphore inside lambda function
* finally works with sem
* install targets cmake error fix
* reducing the number of data call backs. incoming from developer
* WIP: of synchronisation (#969)
* WIP of synchronisation
* working so far if everything goes right
* added all information into json headers
* valid json
* allow frame synchronizer to have access to static libzmq when compiling on conda (libzeromq-devel not installed by default
* upto date with multirecieverapp for invalid arguments and help
* formatting
* remove warnings
* changes to print
* removed prints
* no need for print frames to be called
* minor
* commnet
* adding json header in start callback, imagesize in data callback and formatted
* fixed sanitizer issues. 1 left for ctrl+C
- zmq_msg_t should be deleted, not freed. Same with the char arrays and semaphores.
* fixed sanitizer issues and made it more readable
* moving clearing old frames to new startacq just in case it has to process soem frames before the callback
* created a callback mutex to register the callbacks when using threads for different Receiver objects instead of child processes, remove the clean up of the frames (deleting from a signal is thread unsafe) from the siginterrupt handler, reading or setting terminate should also be inside the mutex, pass receiver object index so that only the first one cleans up the shared structure
---------
Co-authored-by: Felix Engelmann <felix-github@nlogn.org>
* wasnt showing error message for invalid arguments to slsmultireceiver
* allow 0 arguments to act like an slsReceiver with start tcp port 1954 and just 1 receiver
* docs receiver formats rewrite
* added documentation for all the receiver files, updated release notes, udpated help in commands help for timing, fixed by throwing exception for aa dividy by 0 error caused by not freeing memory (detsize) when switching between 1d and 2d detectors, removed unnecessary 'recevier up' printout, fixed dbit list 64 bit mask error in master json file (was not 64 bit before), fixed bug in reading gotthard1 data (needs to be tested)
* generating commands help and formatting, also fix help for trimen command line
* added ctb frame format documentation, added some links to some commands, added documentation about adding expat-devel in installation for rhel8 gui, fixed some indentation issues that screwed up command line help documentation
* added ctb frame format documentation
* updated documentation about zeromq-devel for <8.0.0 versions
* jf: rolling back firmware required to v1.5 and 2.5, updated release notes, fixed a bug when updating server (when server name same as link name:throws with no message, pedestal mode check changed for the time being for loops to be 0xFF size
* compensating for jf fw bug for pedestalmode where loops should be 16 bit, but is 8 bit in fw. to be fixed in next version
* formatting
* formatting, merge fix
* fixed python test simulator to kill previous servers
* rmeoved merge binary
* changed rxr callback signatures to all include structs
* removed datamodify call back as size can be changed in the original data call back now
* bringing some parameters (set functions) to dataProcessor class for its callback (namely udpport, quad, fliprows, totalframes, jsonheader), resulting in also removing totalframes from 2 other function signatures
* updated MultiReceiverApp to reflect the new callback signatures
* enable ipv6 in zmq socket
* removed rx_zmqip API and field in gui, changed client updaterxrzip to updateclientzmqip to have the rx_hostname ip if 0.
* updated command line for rx_zmqip to give a warning.
* Replaced 'depreciated' to 'deprecated' everywhere
* switching from * to 0.0.0.0 works for rebinding zmq sockets
* fixed help in command line for rx_zmqip * to 0.0.0.0 and removed cmd in python
* remove publisher zmq socket ip also for moench post processing
* fixed tests
* publisher zmq ip macros to be reused
* fix the file path resetting issue of GUI in the case where different modules have different fpath setting.
* fix stack-buffer-overflow issue when using HDF5 HDF5DataFile::parameterDataTypes have 64bit type (i.e. STD_U64LE), the size of fill_value should be at least 8 bytes.
* change the type of fill_value to uint64_t
Co-authored-by: Z.H. Li <zhenghenge@gmail.com>
* period and exptime(patternwaittime level 0)
* added new regsieterdefs and updated api version and fixedpattern reg
* autogenerate commands
* formatting
* minor
* wip resetflow, readout mode, transceiver mask, transceiver enable
* acquisition, but streaming done bit and busy (exposing + read chip to fifo) not known yet from fw
* programming fpga and device tree done
* most configuration done, need to connect configuretransceiver to client
* stuck at resetting transciever timed out
* minor
* fixed virtual, added chip busyto fifo, streaming busy, set/getnext framenumber
* configuretransceiver from client, added help in client
* make formatt and command generation
* tests for xilinx ctb works
* command generation
* dacs added and tested, power not done
* power added
* added temp_fpga
* binaries in
* ctrlreg is 0 to enable chip=fixed, high dac val = min val= fixed, power regulators in weird order=fixed, device tree could be loaded with dacs before adcs=fixed
* start works
* virtual server sends
* receiver works
* tests
* python function and enum generation, commands generatorn and autocomplete, formatting, tests
* tests fail at start(transceiver not aligned)
* tests passed
* all binaries compiled
* eiger binary in
* added --nomodule cehck for xilinx
* merge fix from 7.0.2: new jungfrau fw versions, incremented binary, hdf5 and json versions
* moench: changed dac names and default values to old moench values
* moench: remove interface clk polarity at start up
* moench: default speed is half speed, default values for adc offset and adc phase for different speeds (only half speed confirmed), adc vref voltage to 2.0 like G1
* moench: connected adc pipeline to client
* moench: receiver- default frames per file is 100k and discard partial frames as default
* moench binary in
* using tostring in gui for dacs
* moved frame discard policy as a parameter to be configured with a default depending on detector
* moench: 300 degrees for adc phase in full speed
* transceiverenable, tsamples, romode for tranceiver and digital_transceiver
* 202 spec instr only for transceiver mode
* removed check for empty in trans readout and clean memory before reading from fifo
* ctb read fifo strobe for all after reading all channels, adding 1us after selecting channel, changing fw date
* updated 10gb transceiver enable
----
* added transceiver (tsamples, romode(transceiver, digital_transceiver), transceiverenable (mask)
* clean memory before reading from fifo (for analog and digital as well)
* read fifo then read strobe (also corresp fw) fixes number of reads (also for analg and digital)-> increases all pipelines by 1
* fixed bug in rearranging digital data in receiver
* fixed bug in streaming size of data after rearranging
* fixed bug in setbit, clearbit,and getbit
* status checks fifo before returning idle (transmitting if data in fifo if transceiver more enabled)
* soem matterhorn specifics that will need to be put into pattern in a month or two. this is temporary.
* NOTE: breaking api. rxParameters struct has transceiverenabel and tsamples given from det to receiver
adding rx_roi also in the zmq header for external guis to put the "yellow box".. sending full roi instead of -1, and sending for each zmq port. "(multiple yellow boxes)".
* eiger: hardwareversion, fix firmware version unable to read version scenarios, check to see if febl, febr and beb have same fw version
* feb versions can be picked up only after feb initialization
* modified ZmqSocket to expose the SO_RCVBUF and SO_SENDBUF parameters. Modified DataStreamer.cpp to change the SENDBUF to 1MB when HWL is <10. Modified Datastreamer.cpp so that when HWL is changed, socket is unbind/rebind. Added rebind to ZmqSocket.cpp.
Changed slot UpdatePlot() in qdrawplot.h from privat tto public, added plot->UpdatePlot() after every axis range change, so the plots are updated immediatly and not at the next image.
Added onlinedisp_zmq program which connects to the receiver ZMQ port and show images and histos. Compiled against ROOT 6.22/02. Added examples files.
* added setbuffer size also for gui, moved hardcoded values to a macro, removed unnecessary return of ok or success, added actual zmq exception message to could not create sockets error
* zmq: changing buffer size done within hwm
---------
Co-authored-by: mozzanica <l_mozzanica@mpc2012.psi.ch>
Co-authored-by: Dhanya Thattil <dhanya.thattil@psi.ch>
* eiger: adding mask to read/write registers. useful for setting quad parameters as they might have different values for left and right fpga registers.
** fix quad position
* fix quad flipping
* formatting
* first tries with a process intead of thread for rx_arping
* Moving delete pointer of udp socket to stopReciever,so rx_arping can only be set when udp socket is closed
* refactoring and formatting
* unused variable processId
* ignore sigchild to prevent zombie from child processes being killed
* copied jungfrau server to moench and adapted
* fixed image size and num packets
* read n rows allows 16
* commneted out configure_asic_timer at server startup. To be removed later the ASIC_CTRL_REG and storage cell options
* moench:removing the decrement (which was in jf) in read n rows to register
* removed lblsamples from gui
- removed getClientServerAPIVersion in server (not used)
- removed rxr side (clientversion compatibility check), removed enum as well as it is now done on the client side.
- versionAPI.h
- GITBRANCH changed to RELEASE
- dates for all API changed to "sem_version date". Scripts to compile servers modified for this. Empty "branch" name will end up with developer for sem_version.
- Version class with constructor taking in the long version (APILIB date). Other member functions including concise(to get sem_version for new releases and date for old releases),
- bypassing initial tests, also now bypasses the client-rxr compatibility check (at rx_hostname command)
- previously, compatibility between client-det was ensuring both had the same detector API (eg. same APIJUNGFRAU)
- Now, compatibility only checks APILIB (client side) and detector API(eg. APIJUNGFRAU) (detector side) have same major version. It only does backward compatibility test. Rest is upto user to ensure.
- If server is from an older release, it will compare dates like previous implementation (APIJUNGFRAU from both client and det)
- - previously, compatibility between client-rxr was ensuring both had the same APIRECEIVER
- Now, compatibility only checks APILIB (client side) and APIRECEIVER (rxr side) have same major version. It only does backward compatibility test. Rest is upto user to ensure.
- If rxr is from an older release, it will compare dates like previous implementation (APIRECEIVER from both client and rxr)
- removed APIGUI, evalVersionVariables.sh, genVersionHeader.sh (not needed or not used)
- clientVersion, rxrversion and detectorserverversion all return strings and not integers (in hex) anymore. Depending if it has semantic versioning, it will print that or the date if it is too old.
- fixed in python (strings for versions)
- check_version function in detector server changed to "initial checks" as it only checks server-firmware compatibility and initial server checks. Client compatibilities are moved to client side.
- --version gives sem_version and date? Is date needed as well. The clientversion, detserverversion and rxrversion API gives only sem_version (no date)
- - formatting
* udp socket refactor from reuss: closing socket before throwing for bind error in constructor, closing socket at destructor and not at shutdown to allow other thread to read with a -1, so the object can still be accessed
* check for size of packet for every detector
* nullptr to unique ptr to call its destructor, when deallocating resources moved out of shutdown
* minor
* incorrect dimensions for virtual hdf5 parameter set
* fix for corner case bug in hdf5 virtual parameter dataset when frames caught is not a multiple of framesperfile
* reafctoring for readability and error prone hard numbers
