* when dbit list is enabled, the size of data in zmq stream is changed to only the digital bits enabled size. now fixed to also include analog size
* allowing to set 0xffffffffffffffff to pat io control. prevously was used to do a get. fixed also for pat bit mask and pat mask
* using argparse for parsing command line arguments
* added command line option to specify which servers to run
---------
Co-authored-by: Erik Fröjdh <erik.frojdh@gmail.com>
* merge fix from #721 PR (sync) 7.0.2.rc -> developer
* row and column for jungfrau mixed up
* multi module jungfrau sync must do slaves first then master for start acquisition and send software trigger, and master first and then slaves for stopacquisition
* non blocking to slaves first and only then blocking/nonblocking to the master for sending software trigger(jungfrau multi mod sync)
* fixed get/set timing jungfrau when sync enabled, getsync during blocking acquire (for trigger or stop) will get stuck as it should ask the stop server
* switching between 1 and 2 interfaces did not set gui/client zmq port properly. Resulted in dummy streaming forever. fixed
* formatting, refactoring: const & for positions, multi mod M3 stop first master first
* adding missing cstdint for gcc 13
* Refactoring handle sync out, handling synchronization also for softwaretrigger for m3, for start/sync/stop for g2/g1
---------
Co-authored-by: Erik Frojdh <erik.frojdh@gmail.com>
* fixed row and col for moench 2 interfaces
* fix moench getTiming and also allow moench to handle sync
---------
Co-authored-by: Erik Frojdh <erik.frojdh@gmail.com>
* rx_hostname and port combo to one, or hostname to all, or a vector of hostnames and ports, ignoring none or empty, then verifying no duplicates for the host port combo including from shared memory
* extracted function for rx_hostname (#694)
* c++14 revert
* unique hostname-port combo for port, hostname, rx_tcpport (#696)
* verify unique combo for rx_port as well
* check unique hostname-port combo also when setting control port, hostname, rx_hostname and rx_tcpport
---------
Co-authored-by: Erik Fröjdh <erik.frojdh@gmail.com>
Co-authored-by: Erik Frojdh <erik.frojdh@psi.ch>
stop should really stop even if receiver had crashed, so check rx status after sending stop; also ensuring restream in acquire happens only if thers a callback
* copied jungfrau server to moench and adapted
* fixed image size and num packets
* read n rows allows 16
* commneted out configure_asic_timer at server startup. To be removed later the ASIC_CTRL_REG and storage cell options
* moench:removing the decrement (which was in jf) in read n rows to register
* removed lblsamples from gui
- removed getClientServerAPIVersion in server (not used)
- removed rxr side (clientversion compatibility check), removed enum as well as it is now done on the client side.
- versionAPI.h
- GITBRANCH changed to RELEASE
- dates for all API changed to "sem_version date". Scripts to compile servers modified for this. Empty "branch" name will end up with developer for sem_version.
- Version class with constructor taking in the long version (APILIB date). Other member functions including concise(to get sem_version for new releases and date for old releases),
- bypassing initial tests, also now bypasses the client-rxr compatibility check (at rx_hostname command)
- previously, compatibility between client-det was ensuring both had the same detector API (eg. same APIJUNGFRAU)
- Now, compatibility only checks APILIB (client side) and detector API(eg. APIJUNGFRAU) (detector side) have same major version. It only does backward compatibility test. Rest is upto user to ensure.
- If server is from an older release, it will compare dates like previous implementation (APIJUNGFRAU from both client and det)
- - previously, compatibility between client-rxr was ensuring both had the same APIRECEIVER
- Now, compatibility only checks APILIB (client side) and APIRECEIVER (rxr side) have same major version. It only does backward compatibility test. Rest is upto user to ensure.
- If rxr is from an older release, it will compare dates like previous implementation (APIRECEIVER from both client and rxr)
- removed APIGUI, evalVersionVariables.sh, genVersionHeader.sh (not needed or not used)
- clientVersion, rxrversion and detectorserverversion all return strings and not integers (in hex) anymore. Depending if it has semantic versioning, it will print that or the date if it is too old.
- fixed in python (strings for versions)
- check_version function in detector server changed to "initial checks" as it only checks server-firmware compatibility and initial server checks. Client compatibilities are moved to client side.
- --version gives sem_version and date? Is date needed as well. The clientversion, detserverversion and rxrversion API gives only sem_version (no date)
- - formatting
* badchannels for m3 and modify for g2 (file from single and multi)
* m3: invert polarity of bit 7 and 11 signals from setmodule, allow commas in bad channel file
* badchannel file can take commas, colons and comments (also taking care of spaces at the end of channel numbers)
* tests 'badchannels' and 'Channel file reading' added, removing duplicates in badchannel list, defining macro for num counters in client side
* fix segfault when list from file is empty,
* fix tests assertion for ctbconfig (adding message) for c++11
* fixed badchannels in m3server (clocking in trimming)
* badchannel tests can be run from any folder (finds the file)
* vicin default changed to 800, only setting vthx directly allows to set dac even if counter disabled, else disable counter, setallthresholdenergy if an energy is -1, get module value, fix that reg was repaced by isettings
* vth3 disabled for interpolation enable, interpolation disable sets counter mask to what it was before (updating old mask whn setting counter mask except for setting all counters for interpolation enable) and enabling vth3 if counter was enabled
* refactor and test for previous commit
* pump probe only has vth2 enabled, handles both pump probe mode and interpolation mode as well
* wip
* refactored pump probe and interpolation and added to setmodule
* check dacs and trimbits out of range for setmodule (not just threshold)
* binaries in
* m3: pump probe and interpolation mutually exclusive
* minor
* added the possibility to save settings file for m3 and eiger
* added save trimbits to gui
* update release notes
* python wip
* moved location of trimbits save option in gui
* python works
* updating getModule with all its parameters in the server side
* updating binaries
* roi structure expanded to have ymin and ymax
* compile with 'detector roi'
* wip
* wip, rx_roi, rx_clearroi
* wip rxroi
* rxroi wip
* wip rxroi
* merge fix
* wip
* rx_roi works, impl wip, test
* tests in, impl left
* wip, rxroi impl
* wip, rxroi impl
* wip
* setrx_Roi works, getrx_roi, wip
* rx_roi impl done
* wip, rxroi
* wip, getrx_roi rxr ports
* fix ports
* wip
* wip
* fix positions on server side
* wip
* numports wip
* wip
* jungfrau top inner interface row increment
* x, y detpos, wip
* removed eiger row indices flipping in gui (bottom flipping maintained)
* wip
* wip, jungfrau numinterfaces2
* jungfrau virtual works
* eiger, jungfrau, g2 virtual server works
* eiger positions fix, wip
* binaries in
* minor printout
* binaries in
* merge fix
* merge fix
* removing getposition
* setrxroi wip
* set upto port
* get messed, wip
* roi multi to module works, wip
* wip
* roi dont return -1
* added rxroi metadata in master file
* added rxroifromshm, not yet in detector
* rx roi in gui with box, also for gap pixels (gappixels for jungfrau mess)
* fix for segfault in gui with detaching roi box in gui
* wip
* m3 gui: slave timing modes should be discarded when squashing
* fixed m3 virtual data, and fixed counters in gui asthetics
* m3 roi works
* wip, g2
* wip
* handling g225um boards, and showing roi for gainplot as well
* udpate python functions
* fix for 1d and a2d roi written
* fixed actual roi written to file
* no virtual hdf5 when handling rx roi
* test
* minor
* binarie in
* wip, adding m3 functions: polarity, inerpolation, pumpprobe
* added interpol, polarity, pump probe, analog pulsing, digital pulsing
* tests
* binaries in
* update release
* added python polarity enum
* fixed python and minor readability in mythen3.c
* binarie sin
* added all the m3 funcs also in list.c and enablingall counters for enabling interpolation
* binarie sin
- progress looks at activated or enabled ports, so progress does not stagnate
- (eiger) disable datastreaming also for virtual servers only for 10g
- missing packets also takes care of disabled ports
* test for rx_arping
* arping ip and interface from client interface
* apring thread added to thread ids
* clean code for thread for arping
* removing the assumption that udpip1 fill be updated along with udpip2
* review, replacing syscall(sys_gettid) with gettid()
