* moench: changed max shifts of adc clk from 240 to 200 (#909)
* moench server name and version renaming
* 802/moench default speed (#910)
* moench:change default speed to half speed
* Protect from getenv("HOME") returning nullptr (#907)
* Protect from getenv("HOME") returning nullptr (e.g., in case running in systemd)
* Write proper warning in Module.cpp
* moench: min exptime and also a firmware update required (#911)
* moench server: changed default values of adcphase for full speed from 300 to 150 and dac vipre_cds from 800 to 1280 (#921)
* client bug fix: m3 multi module bad channel file throws bad allocation when modules skipped, needed to add vectors in 2d vector of bad channel list (#919)
* 8.0.2.rc: client: blocking acquire stop with slave temporarily in waiting (#925)
* client: stopping a blocking acquire of multi modules checks status to catch slaves that might still be in waiting. Problem is (gotthard2 25um at least) slave is in waiting only temporarily before going go idle/stopped. So a 50ms sleep is necessary ot not throw an unnecessary error
* client: when stopping blocking acquire, wait up to 1s in 50ms increments for slave to stop waiting temporarily
* fix to rapidjson for build with gcc 14 (#928)
* 8.0.2.rc: m3 clkdiv0 20 (#923)
* m3: clk 0 changed from 10 to 20 (100MHz to 50MHz)
* g2: startup clk div back to 10 as in firmware but setting in software startup to 20
* 8.0.2.rc: moench empty data callback (#935)
* moench: empty data call back so that zmq sockets are still made and listened to in acquire that it waits for the dummy packet to be done
* moench zmq postprocessor: remove NEWZMQ ifdefs and remove connect for publisher socket
* changed enum from READOUT_ACTION_ZMQ to READOUT_ZMQ_ACTION for consistency
* 8.0.2.rc: client: status for blocking acquire stop with slave temporarily in waiting (#943)
* acq finish call back gets status squashed with default error but before that need to wait for gotthard slaves to catch up from waiting to stopped
* bug fixes related to file saving (#931)
* fix the file path resetting issue of GUI in the case where different modules have different fpath setting.
* fix stack-buffer-overflow issue when using HDF5 HDF5DataFile::parameterDataTypes have 64bit type (i.e. STD_U64LE), the size of fill_value should be at least 8 bytes.
* change the type of fill_value to uint64_t
* updated documentation from martin (#947)
* 802: jungfrau HW 1.0: adc output clock phase to 120 (#951)
* jungfrau: change adc output clock phase from 180 to 120 for v1.0 boards for reliable readout of adc #2
* formatting
* 802/release notes (#954)
* updated release notes
* versioning
* fixed a warning about narrowing conversion from size_t to int (#962)
* updating client versioning
* dont build doc for Tobi Schluter from libzmq, which uses iso-8859-1 and the umlaut cause compilation to fail on some machines (#972)
* updated release notes
---------
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
Co-authored-by: Erik Fröjdh <erik.frojdh@gmail.com>
Co-authored-by: Z.H. Li <zhenghenge@gmail.com>
* merge fix from 7.0.2: new jungfrau fw versions, incremented binary, hdf5 and json versions
* moench: changed dac names and default values to old moench values
* moench: remove interface clk polarity at start up
* moench: default speed is half speed, default values for adc offset and adc phase for different speeds (only half speed confirmed), adc vref voltage to 2.0 like G1
* moench: connected adc pipeline to client
* moench: receiver- default frames per file is 100k and discard partial frames as default
* moench binary in
* using tostring in gui for dacs
* moved frame discard policy as a parameter to be configured with a default depending on detector
* moench: 300 degrees for adc phase in full speed
* moench, removed chip version, filter resistor, filter cells, currentsoures, gain mode, setttings(modes), dbitphase, maxdbitphase, autocompdisable, comparatordisabletime, made acq start and stop a pulse, removed unused registers
* added parallel command
* remove gain plot for moench
* moench: updated adc invert val
* moench: update adcoffset to 0xf and adcphase to 140 degrees
* removed sync clock in moench
* updated min fw version
* removing config file in moench server
* modified ZmqSocket to expose the SO_RCVBUF and SO_SENDBUF parameters. Modified DataStreamer.cpp to change the SENDBUF to 1MB when HWL is <10. Modified Datastreamer.cpp so that when HWL is changed, socket is unbind/rebind. Added rebind to ZmqSocket.cpp.
Changed slot UpdatePlot() in qdrawplot.h from privat tto public, added plot->UpdatePlot() after every axis range change, so the plots are updated immediatly and not at the next image.
Added onlinedisp_zmq program which connects to the receiver ZMQ port and show images and histos. Compiled against ROOT 6.22/02. Added examples files.
* added setbuffer size also for gui, moved hardcoded values to a macro, removed unnecessary return of ok or success, added actual zmq exception message to could not create sockets error
* zmq: changing buffer size done within hwm
---------
Co-authored-by: mozzanica <l_mozzanica@mpc2012.psi.ch>
Co-authored-by: Dhanya Thattil <dhanya.thattil@psi.ch>
* copied jungfrau server to moench and adapted
* fixed image size and num packets
* read n rows allows 16
* commneted out configure_asic_timer at server startup. To be removed later the ASIC_CTRL_REG and storage cell options
* moench:removing the decrement (which was in jf) in read n rows to register
* removed lblsamples from gui
- qt4->qt5
- in built qt5 6.1.5 because rhel7 is not upto date with qt5, removed findqwt.cmake
- made a fix in qwt lib (qwt_plot_layout.h) to work with 5.15 and lower versions for qrect constr.
- qt5 forms fixed, qt4 many hard coding forms switched to forms including qtabwidget, scrolls etc, fonts moved to forms
- docking option enabled by default, removed option to disable docking feature from "Mode"
- added qVersionResolve utility functions to handle compatibility before and after qt5.12
- qtplots (ian's code) takes in gain mode enable to set some settings within the class, with proper gain plot ticks
- ensure gain plots have no zooming of z axis in 2d and y axis in 1d
- removed placeholder text in qpalette in main window form as its not supportd until 5.12 (so using qt5.9 designer insted of qt5.15 to cope)
- tab order
Servers:
- fixed some error messages that were empty for fail in funcs (mostly minor as if this error, major issues)
- removed getClientServerAPIVersion in server (not used)
- removed rxr side (clientversion compatibility check), removed enum as well as it is now done on the client side.
- versionAPI.h
- GITBRANCH changed to RELEASE
- dates for all API changed to "sem_version date". Scripts to compile servers modified for this. Empty "branch" name will end up with developer for sem_version.
- Version class with constructor taking in the long version (APILIB date). Other member functions including concise(to get sem_version for new releases and date for old releases),
- bypassing initial tests, also now bypasses the client-rxr compatibility check (at rx_hostname command)
- previously, compatibility between client-det was ensuring both had the same detector API (eg. same APIJUNGFRAU)
- Now, compatibility only checks APILIB (client side) and detector API(eg. APIJUNGFRAU) (detector side) have same major version. It only does backward compatibility test. Rest is upto user to ensure.
- If server is from an older release, it will compare dates like previous implementation (APIJUNGFRAU from both client and det)
- - previously, compatibility between client-rxr was ensuring both had the same APIRECEIVER
- Now, compatibility only checks APILIB (client side) and APIRECEIVER (rxr side) have same major version. It only does backward compatibility test. Rest is upto user to ensure.
- If rxr is from an older release, it will compare dates like previous implementation (APIRECEIVER from both client and rxr)
- removed APIGUI, evalVersionVariables.sh, genVersionHeader.sh (not needed or not used)
- clientVersion, rxrversion and detectorserverversion all return strings and not integers (in hex) anymore. Depending if it has semantic versioning, it will print that or the date if it is too old.
- fixed in python (strings for versions)
- check_version function in detector server changed to "initial checks" as it only checks server-firmware compatibility and initial server checks. Client compatibilities are moved to client side.
- --version gives sem_version and date? Is date needed as well. The clientversion, detserverversion and rxrversion API gives only sem_version (no date)
- - formatting
* added the possibility to save settings file for m3 and eiger
* added save trimbits to gui
* update release notes
* python wip
* moved location of trimbits save option in gui
* python works
* updating getModule with all its parameters in the server side
* updating binaries
* roi structure expanded to have ymin and ymax
* compile with 'detector roi'
* wip
* wip, rx_roi, rx_clearroi
* wip rxroi
* rxroi wip
* wip rxroi
* merge fix
* wip
* rx_roi works, impl wip, test
* tests in, impl left
* wip, rxroi impl
* wip, rxroi impl
* wip
* setrx_Roi works, getrx_roi, wip
* rx_roi impl done
* wip, rxroi
* wip, getrx_roi rxr ports
* fix ports
* wip
* wip
* fix positions on server side
* wip
* numports wip
* wip
* jungfrau top inner interface row increment
* x, y detpos, wip
* removed eiger row indices flipping in gui (bottom flipping maintained)
* wip
* wip, jungfrau numinterfaces2
* jungfrau virtual works
* eiger, jungfrau, g2 virtual server works
* eiger positions fix, wip
* binaries in
* minor printout
* binaries in
* merge fix
* merge fix
* removing getposition
* setrxroi wip
* set upto port
* get messed, wip
* roi multi to module works, wip
* wip
* roi dont return -1
* added rxroi metadata in master file
* added rxroifromshm, not yet in detector
* rx roi in gui with box, also for gap pixels (gappixels for jungfrau mess)
* fix for segfault in gui with detaching roi box in gui
* wip
* m3 gui: slave timing modes should be discarded when squashing
* fixed m3 virtual data, and fixed counters in gui asthetics
* m3 roi works
* wip, g2
* wip
* handling g225um boards, and showing roi for gainplot as well
* udpate python functions
* fix for 1d and a2d roi written
* fixed actual roi written to file
* no virtual hdf5 when handling rx roi
* test
* minor
* binarie in
