* updated RegisterDefs.h from firmware update
* Revert "updated RegisterDefs.h from firmware update"
This reverts commit 64f1b2546e742f0b0513124a599cd9bcde11760c.
* updated registers and had it formatted
* Revert "updated registers and had it formatted"
This reverts commit 1641b705b0d8616bcff4a5cd796d8796d09391f2.
* udpated registers from firmware, reading config file in server (chip config, reset chip, enable_clock_pattern) specific for matterhorn,this is done when powering on chip, removed startreadout, fixed status register bits, updated firmware version
* fix for patioctrl allowed for zxilinx and adding readout pattern for scientists that like to push the acquire button
* fixing default enable clock and readout pattern for xilinx (patioctrl has to be 32 bit)
* Xilinxctb/first image (#1094)
* reduce xilinxCTB readout done checks to single register, increased clockEna pattern limits, clear FPGA FiFos and counters on powerchip, disable counters 1-3 in matterhorn configuration
* change print of xilinxctb server
* remove acquisition done check
---------
Co-authored-by: Martin Mueller <martin.mueller@psi.ch>
* binary xilinx in
* formatting
* added reset of udp buffer FIFO to xilinxCTB
---------
Co-authored-by: Martin Mueller <72937414+mmarti04@users.noreply.github.com>
Co-authored-by: Martin Mueller <martin.mueller@psi.ch>
* voltage regulators only looks at dac and not at ctrl_reg
* xilinx: change dac max to 2048, setting dac ist not inverse conversion from dac to voltage anymore, but setting power is inverse, also there is max and min to power, a different min for vio and this is checked at funcs interface, not printign or converting to mv in dac for power regulators (as its conversion max and min are different)
* Use links for dacs/adc and adapt power rglt thresholds
* Remove wait for transceiver reset
* adc and dac device not used anymore and hence removed
* udp restucturing: arm has to be multiple of 16 and no byteswap in udp_gen, option to compile locally in arm architecture, memsize of the second udp memory has to be limited
---------
Co-authored-by: Martin Brückner <martin.brueckner@psi.ch>
* period and exptime(patternwaittime level 0)
* added new regsieterdefs and updated api version and fixedpattern reg
* autogenerate commands
* formatting
* minor
* wip resetflow, readout mode, transceiver mask, transceiver enable
* acquisition, but streaming done bit and busy (exposing + read chip to fifo) not known yet from fw
* programming fpga and device tree done
* most configuration done, need to connect configuretransceiver to client
* stuck at resetting transciever timed out
* minor
* fixed virtual, added chip busyto fifo, streaming busy, set/getnext framenumber
* configuretransceiver from client, added help in client
* make formatt and command generation
* tests for xilinx ctb works
* command generation
* dacs added and tested, power not done
* power added
* added temp_fpga
* binaries in
* ctrlreg is 0 to enable chip=fixed, high dac val = min val= fixed, power regulators in weird order=fixed, device tree could be loaded with dacs before adcs=fixed
* start works
* virtual server sends
* receiver works
* tests
* python function and enum generation, commands generatorn and autocomplete, formatting, tests
* tests fail at start(transceiver not aligned)
* tests passed
* all binaries compiled
* eiger binary in
* added --nomodule cehck for xilinx
* implemented testbus, testfpga, set/get #frames, triggers, allowed that and for connection to client, also allowed, getnumchannels, configuremac, getrunstatus, setdetectorposition with dummy values
* connected kernelversion, hardwareversion, versions, framesl, triggersl, dr, timingmode, pattern (except patioctrl) thats there for altera ctb
* replaced set/get64Bit to set/getU64bit in all loadpattern.c for (ctb and m3 also)
* updated registers, arm64
* compiler set to aarch64 for xilinx server
* updated RegisterDefs.h
* merge into generate branch and resolving conflicts and adding the xilinx changes to callerspecial and commands.yaml
* compiles and can print firmware version (using a different csp0 address)
* fixing other servers (gotthard, jungfrau, moench, mythen3) that it returns in case of mapping failure, xilinxctb: added that it checks type, prints proper fw version, checks kernel date, added armprocessor define to use in common places, added specifiers to supress overflow and truncation warnings
* added detector ip and mac adddress to the printout
* fixed tests and recompiled servers
