* jf: rolling back firmware required to v1.5 and 2.5, updated release notes, fixed a bug when updating server (when server name same as link name:throws with no message, pedestal mode check changed for the time being for loops to be 0xFF size
* compensating for jf fw bug for pedestalmode where loops should be 16 bit, but is 8 bit in fw. to be fixed in next version
* formatting
* formatting, merge fix
* fixed python test simulator to kill previous servers
* rmeoved merge binary
* period and exptime(patternwaittime level 0)
* added new regsieterdefs and updated api version and fixedpattern reg
* autogenerate commands
* formatting
* minor
* wip resetflow, readout mode, transceiver mask, transceiver enable
* acquisition, but streaming done bit and busy (exposing + read chip to fifo) not known yet from fw
* programming fpga and device tree done
* most configuration done, need to connect configuretransceiver to client
* stuck at resetting transciever timed out
* minor
* fixed virtual, added chip busyto fifo, streaming busy, set/getnext framenumber
* configuretransceiver from client, added help in client
* make formatt and command generation
* tests for xilinx ctb works
* command generation
* dacs added and tested, power not done
* power added
* added temp_fpga
* binaries in
* ctrlreg is 0 to enable chip=fixed, high dac val = min val= fixed, power regulators in weird order=fixed, device tree could be loaded with dacs before adcs=fixed
* start works
* virtual server sends
* receiver works
* tests
* python function and enum generation, commands generatorn and autocomplete, formatting, tests
* tests fail at start(transceiver not aligned)
* tests passed
* all binaries compiled
* eiger binary in
* added --nomodule cehck for xilinx
* implemented testbus, testfpga, set/get #frames, triggers, allowed that and for connection to client, also allowed, getnumchannels, configuremac, getrunstatus, setdetectorposition with dummy values
* allowing tests for xilinx
* binaries in
* commands code generation (#803)
* commands code generation for only frames command
* fix cmake file and add Caller files
* working exptime, fully extended commands file and its variants
* start adding template commands
* add INT_CMD_VEC_ID template
* add list command, generate multiple bins, format code
* reach 208 commands using the cpp macros
* add tests for command parser
* start adding tests for commands parser
* fix typo to use commands.yaml
* add more tests for command_parser
* add all template functions (up to 218 commands)
* finish template functions and add more CmdProxy.cpp functions (250+)
* 257 commands
* 300 commands the rest are very special commands
* add special commands without generation
* separate special functions from generated c++ file
* implementing one command for put and get (buggy)
* add infer action in a separate file
* generate header for special commands from yaml
* allow only 0 or 1 for bool inputs
* group all commands in gen_commands.py
* add help to gen_commands.py
* add autocomplete bash script
* autocompletion: add support for module levels and help
* remove debugging line
* add autocompletion, help to commands, change int [0,1] to bool
* copy tests for Caller.cpp. Tests pass
* update with the new developer branch changes
* fix errors after merging (there is problems with tests)
* fixed port/stopport in yaml (intput typo), added '_caller' to the test dac and test on chip dac command in global test for cmdcaller
* undo previous test simulator debug change
* add documentation for the generated code
* reducing the comment to be replaced in length so formatting does not split into 2 lines
* removed formatting specific style of C++11 in gen_commands.py to keep with the top level clang format of the project
* regeneratign code for commands
* automation generated
* Redirect deprecated commands (#872)
* working implementation, need to fix dac
* fixed deprecation redirect for dac command
* Detector specific autocomplete (#873)
* working implementation, need to fix dac
* fixed deprecation redirect for dac command
* detector specific completion for dac
* added autocomplete using detector specific
* fixed error when autocompleting partial words
* Generate commands/fix commands (#875)
* fix vm_a, im_a etc have deg Celsius suffix, also help missing or changed in some places
* dac: require det id for all, arg0 to be printed at output, help for onchip dac and dac, onchipdac: spacing
* getscan detid and blocking trigger help
* udp_Dstlist det_id fixed, but rx_id invalid
* cmdApp in line with cmdLineApp (missing version, receiver_id, not creating det object in help action
* added set_command to differentiate between check_det_id and require_det_id (mixed up), args: -1 needs to check for at least one argument
* reordering
* reordering and checked till integer_command_hex
* fixed a lot more commands
* fix caller tests for eiger
* changes to tests after Bechir left
* changing .cmd to .cmdcall for the caller commands
* fixed tests for caller, still warning for setexptime about cast input
* autocomplete ran
* add moench test
* regenerating autocomplete and commands
* fixing other things from merge conflicts (renaming slsDetectorDefs to defs in commands.yaml)
* formatting
* added code injection to help (#876)
* updated 3 commands to have get output that can be put into put (#877)
* updated some commands to have get output that can be put into put
* fix tests for clkdiv
* adding help to free (#878)
* removing old commands and renaming them, (also making it work for parameters command as it was still calling cmdproxy) (#879)
* More helpful error messages for unsupported actions (#880)
* removing old commands and renaming them, (also making it work for parameters command as it was still calling cmdproxy)
* Added specific help for unsupported actions
* fixed a vetofile get special exception message. more specific warning for special exception message instead of no function warning
* added condition checking true in exceptions for special message
---------
Co-authored-by: Bechir Brahem <bachbrahem@gmail.com>
Co-authored-by: Erik Frojdh <erik.frojdh@gmail.com>
Co-authored-by: Dhanya Thattil <dhanya.thattil@psi.ch>
* draft to fix virtual test when it fails
* catching errors in tests and removing sigchild ignore so servers (process in background) executing commands will not fail (pclose no child processes, if sigchld is ignored) fixed
* uncommented python loading config
* somehow killal slsReciever in second detector test fails even though no receiver running
* fixing script for virtual simlator test:fixed issue with check if process running, fixed moench tests
* using argparse for parsing command line arguments
* added command line option to specify which servers to run
---------
Co-authored-by: Erik Fröjdh <erik.frojdh@gmail.com>
* badchannels for m3 and modify for g2 (file from single and multi)
* m3: invert polarity of bit 7 and 11 signals from setmodule, allow commas in bad channel file
* badchannel file can take commas, colons and comments (also taking care of spaces at the end of channel numbers)
* tests 'badchannels' and 'Channel file reading' added, removing duplicates in badchannel list, defining macro for num counters in client side
* fix segfault when list from file is empty,
* fix tests assertion for ctbconfig (adding message) for c++11
* fixed badchannels in m3server (clocking in trimming)
* badchannel tests can be run from any folder (finds the file)
* removed Makefile for moench and integrated the build in CMake
* broke out tiff reading and writing to its own library
* moved tiff includes to include/sls
* moved tiffio source to src
* removed incorrectly used bps
* cleanup and tests for tiffio
* removed using namespace std from header
* some fixing for moench04
* Program for offline processing renamed
Co-authored-by: Anna Bergamaschi <anna.bergamaschi@psi.ch>
* Setting pattern from memory (#218)
* ToString accepts c-style arrays
* fixed patwait time bug in validation
* Introduced pattern class
* compile for servers too
* Python binding for Pattern
* added scanParameters in Python
* slsReceiver: avoid potential memory leak around Implementation::generalData
* additional constructors for scanPrameters in python
* bugfix: avoid potentital memory leak in receiver if called outside constructor context
* added scanParameters in Python
* additional constructors for scanPrameters in python
* M3defaultpattern (#227)
* default pattern for m3 and moench including Python bindings
* M3settings (#228)
* some changes to compile on RH7 and in the server to load the default chip status register at startup
* Updated mythen3DeectorServer_developer executable with correct initialization at startup
Co-authored-by: Erik Frojdh <erik.frojdh@gmail.com>
Co-authored-by: Anna Bergamaschi <anna.bergamaschi@psi.ch>
* Pattern.h as a public header files (#229)
* fixed buffer overflow but caused by using global instead of local enum
* replacing out of range trimbits with edge values
* replacing dac values that are out of range after interpolation
* updated pybind11 to 2.6.2
* Mythen3 improved synchronization (#231)
Disabling scans for multi module Mythen3, since there is no feedback of the detectors being ready
startDetector first starts the slaves then the master
acquire firs calls startDetector for the slaves then acquire on the master
getMaster to read back from hardware which one is master
* New server for JF to go with the new FW (#232)
* Modified Jungfrau speed settings for HW1.0 - FW fix version 1.1.1, compilation date 210218
* Corrected bug. DBIT clk phase is implemented in both HW version 1.0 and 2.0. Previous version did not update the DBIT phase shift on the configuration of a speed.
* fix for m3 scan with single module
* m3 fw version
* m3 server
* bugfix for bottom when setting quad
* new strategy for finding zmq based on cppzmq
Co-authored-by: Dhanya Thattil <dhanya.thattil@psi.ch>
Co-authored-by: Dhanya Thattil <33750417+thattil@users.noreply.github.com>
Co-authored-by: Alejandro Homs Puron <ahoms@esrf.fr>
Co-authored-by: Anna Bergamaschi <anna.bergamaschi@psi.ch>
Co-authored-by: Xiaoqiang Wang <xiaoqiangwang@gmail.com>
Co-authored-by: lopez_c <carlos.lopez-cuenca@psi.ch>
* set starting frame number of next acquisition for both jungfrau and eiger. firmware has not implemented a get, so workaround. tests included. frame number 0 not allowed due to Eiger. Eiger max frame is 48 bit, while jungfrau is 64 bit
* made argument of setstartingframenumber const
