* eiger: hardwareversion, fix firmware version unable to read version scenarios, check to see if febl, febr and beb have same fw version
* feb versions can be picked up only after feb initialization
* added none or 0 to unset bad channels
* free function split to get int array from string of arguments for badchannels
* missed a file
* allowing list for badchannels in command line
* added badchannels in python
* added size check
* more comments in Detector.h and added more tests for facny command line badchannels
* removeDuplicates accept any container, added tests
* corner cases: 1:5,6,7 or 5,6,7 or just 1:5
Co-authored-by: Erik Frojdh <erik.frojdh@gmail.com>
* copied jungfrau server to moench and adapted
* fixed image size and num packets
* read n rows allows 16
* commneted out configure_asic_timer at server startup. To be removed later the ASIC_CTRL_REG and storage cell options
* moench:removing the decrement (which was in jf) in read n rows to register
* removed lblsamples from gui
* badchannels for m3 and modify for g2 (file from single and multi)
* m3: invert polarity of bit 7 and 11 signals from setmodule, allow commas in bad channel file
* badchannel file can take commas, colons and comments (also taking care of spaces at the end of channel numbers)
* tests 'badchannels' and 'Channel file reading' added, removing duplicates in badchannel list, defining macro for num counters in client side
* fix segfault when list from file is empty,
* fix tests assertion for ctbconfig (adding message) for c++11
* fixed badchannels in m3server (clocking in trimming)
* badchannel tests can be run from any folder (finds the file)
* g2: new hdi values, write hdi value to reg, set slave/master to reg, able to set master from server config file, server command line and client
* print versions for virtual as well
* separating pattern levels from command name: command line done
* separated patten level from command in examples and default pattern files in servers
* command line and server works
* python: patnloop not verified, wip
* works except for patloop (set, and get does not list properly)
* minor
* fixed tests
* added 3 more levels for ctb and moench
* wip
* minor err msg
* minor
* binaries in
* separating pattern levels from command name: command line done
* separated patten level from command in examples and default pattern files in servers
* command line and server works
* python: patnloop not verified, wip
* works except for patloop (set, and get does not list properly)
* minor
* fixed tests
* added 3 more levels for ctb and moench
* wip
* minor err msg
* minor
* binaries in
* python working
* import fix
* changed fw version for ctb and moench. binaries in
Co-authored-by: Erik Frojdh <erik.frojdh@gmail.com>
* vicin default changed to 800, only setting vthx directly allows to set dac even if counter disabled, else disable counter, setallthresholdenergy if an energy is -1, get module value, fix that reg was repaced by isettings
* vth3 disabled for interpolation enable, interpolation disable sets counter mask to what it was before (updating old mask whn setting counter mask except for setting all counters for interpolation enable) and enabling vth3 if counter was enabled
* refactor and test for previous commit
* pump probe only has vth2 enabled, handles both pump probe mode and interpolation mode as well
* wip
* refactored pump probe and interpolation and added to setmodule
* check dacs and trimbits out of range for setmodule (not just threshold)
* binaries in
* m3: pump probe and interpolation mutually exclusive
* minor
* roi structure expanded to have ymin and ymax
* compile with 'detector roi'
* wip
* wip, rx_roi, rx_clearroi
* wip rxroi
* rxroi wip
* wip rxroi
* merge fix
* wip
* rx_roi works, impl wip, test
* tests in, impl left
* wip, rxroi impl
* wip, rxroi impl
* wip
* setrx_Roi works, getrx_roi, wip
* rx_roi impl done
* wip, rxroi
* wip, getrx_roi rxr ports
* fix ports
* wip
* wip
* fix positions on server side
* wip
* numports wip
* wip
* jungfrau top inner interface row increment
* x, y detpos, wip
* removed eiger row indices flipping in gui (bottom flipping maintained)
* wip
* wip, jungfrau numinterfaces2
* jungfrau virtual works
* eiger, jungfrau, g2 virtual server works
* eiger positions fix, wip
* binaries in
* minor printout
* binaries in
* merge fix
* merge fix
* removing getposition
* setrxroi wip
* set upto port
* get messed, wip
* roi multi to module works, wip
* wip
* roi dont return -1
* added rxroi metadata in master file
* added rxroifromshm, not yet in detector
* rx roi in gui with box, also for gap pixels (gappixels for jungfrau mess)
* fix for segfault in gui with detaching roi box in gui
* wip
* m3 gui: slave timing modes should be discarded when squashing
* fixed m3 virtual data, and fixed counters in gui asthetics
* m3 roi works
* wip, g2
* wip
* handling g225um boards, and showing roi for gainplot as well
* udpate python functions
* fix for 1d and a2d roi written
* fixed actual roi written to file
* no virtual hdf5 when handling rx roi
* test
* minor
* binarie in
* wip, adding m3 functions: polarity, inerpolation, pumpprobe
* added interpol, polarity, pump probe, analog pulsing, digital pulsing
* tests
* binaries in
* update release
* added python polarity enum
* fixed python and minor readability in mythen3.c
* binarie sin
* added all the m3 funcs also in list.c and enablingall counters for enabling interpolation
* binarie sin
Fixed by checking for help action before using the detector
added test that checks that for all helps this doesn't crash
Disabled Timer tests by default since they take ~2s
