Dhanya Maliakal
|
e3667f6827
|
can set zmqport from receiver
|
2017-07-13 12:18:07 +02:00 |
|
Dhanya Maliakal
|
b4309a9f60
|
changed jungfrau temperature conversion but binary to follow
|
2017-07-03 14:45:44 +02:00 |
|
Dhanya Maliakal
|
c2980b3c44
|
changes for setting threshold without trimbits for eiger
|
2017-06-28 10:24:07 +02:00 |
|
Dhanya Maliakal
|
e2e25f6e62
|
changed API for setting network parameter to remove memory leak, fixed lock issues in streaming print outs to gui, deleted return from threadpool in the right place
|
2017-06-19 14:29:45 +02:00 |
|
Dhanya Maliakal
|
445da80df8
|
resolved warnings, also from esrf: todo: include changes in zmq
|
2017-05-01 13:11:10 +02:00 |
|
Dhanya Maliakal
|
7e00d9f395
|
Merge branch 'developer' into hdf5
|
2017-03-03 10:06:34 +01:00 |
|
Dhanya Maliakal
|
19460a03f5
|
sending position id and num detectors in x and y dir
|
2017-02-21 15:13:27 +01:00 |
|
Dhanya Maliakal
|
9b3f4a3a66
|
commonFiles/error_defs.h
|
2017-02-03 14:34:05 +01:00 |
|
Dhanya Maliakal
|
87ce1ed736
|
moved tau to settings file, removed gain and offset, setting threshold loads settings file, setting threshold only sets client variable
|
2017-02-03 12:29:44 +01:00 |
|
|
|
68b13a0ecd
|
merged to developer
|
2016-12-19 12:26:53 +01:00 |
|
|
|
12cd3d07a2
|
some changes for jctb
|
2016-12-19 12:05:59 +01:00 |
|
Dhanya Maliakal
|
a971d87008
|
Merge branch '2.2-rc' into hdf5
|
2016-12-13 13:23:06 +01:00 |
|
Dhanya Maliakal
|
2a508435c7
|
change the filenaming according to det position and not det id
|
2016-12-13 11:41:27 +01:00 |
|
Dhanya Maliakal
|
e7621a6cd0
|
moving towards c++ api
|
2016-12-12 14:24:11 +01:00 |
|
Dhanya Maliakal
|
dd9387ef29
|
using detid to calculte zmq port in case of shmget error and det id does not start with 0 and 1 as in receiver zmq server ports
|
2016-12-02 08:53:08 +01:00 |
|
Dhanya Maliakal
|
466f1506a5
|
bottom is defined as flippeddatax in config file, not anymore as argument for receiver
|
2016-11-30 10:36:34 +01:00 |
|
Dhanya Maliakal
|
52dbb7f9fc
|
smaller changes to make arguments const
|
2016-11-25 12:22:00 +01:00 |
|
Dhanya Maliakal
|
394526a9c3
|
removed zmq threads from client and made it receive packets via for loop
|
2016-11-22 11:05:42 +01:00 |
|
Dhanya Maliakal
|
44d6b0ffc0
|
fixed time interval in receiveR
|
2016-11-10 14:37:18 +01:00 |
|
|
|
cb879c61ca
|
changes for new chipterboard -now works with reduced dynamic range and analog/digital readout
|
2016-11-09 11:36:59 +01:00 |
|
Dhanya Maliakal
|
79d5a24af4
|
debugging
|
2016-11-04 12:02:37 +01:00 |
|
Dhanya Maliakal
|
4b99ff7fbe
|
reset fpga implemented, changed receiver configuration warning prints, powerchip implemented
|
2016-11-03 12:31:34 +01:00 |
|
Dhanya Maliakal
|
6da59ca382
|
somewhere, but weird threads
|
2016-10-05 15:26:58 +02:00 |
|
Dhanya Maliakal
|
984698efad
|
merged with developer a lot of bug fixes from 14 sep to 30 sep
|
2016-10-04 13:36:04 +02:00 |
|
Dhanya Maliakal
|
5f4a4b0d90
|
maybe fixed 16 bit rate corr eiger
|
2016-09-23 17:15:16 +02:00 |
|
Dhanya Maliakal
|
d0501c3139
|
creating and destroying sockets for each receiver start and stop in a single acquisition (to deal with scans etc)
|
2016-09-21 16:37:29 +02:00 |
|
Dhanya Maliakal
|
a1df8bdc15
|
done for eiger, some checks for frameindex=-1,socket closing earlier than last socket etc
|
2016-09-20 15:11:39 +02:00 |
|
Dhanya Maliakal
|
1263e80d21
|
done
|
2016-09-16 12:49:27 +02:00 |
|
Dhanya Maliakal
|
1da4b07e73
|
works, need to do json header and send dataready
|
2016-09-15 17:15:55 +02:00 |
|
Dhanya Maliakal
|
a821442b1a
|
almosst
|
2016-09-15 12:16:01 +02:00 |
|
Dhanya Maliakal
|
652d29f2d9
|
almost done
|
2016-09-09 17:51:36 +02:00 |
|
Dhanya Maliakal
|
29ba1f4042
|
changed transmission delay commands to go through network parameters and included 10g flow control
|
2016-08-04 17:21:16 +02:00 |
|
Dhanya Maliakal
|
d28d737fb9
|
transmission delay added
|
2016-08-03 17:03:37 +02:00 |
|
Dhanya Maliakal
|
c0db1a89a8
|
deactivate for eiger
|
2016-08-02 10:32:37 +02:00 |
|
Dhanya Maliakal
|
6823e3065b
|
feature: tau is now read from calib file. if not there, it is set to defalt in server value, but switched off. load trimbits will not touch rate correction
|
2016-07-05 12:01:41 +02:00 |
|
Dhanya Maliakal
|
5af05c24c1
|
added iodelay with setttings
|
2016-02-24 18:05:17 +01:00 |
|
Dhanya Maliakal
|
c097dfc8b3
|
two acquires at the same tiem should not be possile. using shared memory to set flag, made all connect use the standard connectControl etc
|
2015-11-20 16:28:48 +01:00 |
|
Dhanya Maliakal
|
e0464ef782
|
pulsing client side, and bug fix server side for reset partially
|
2015-11-19 16:15:59 +01:00 |
|
Dhanya Maliakal
|
8b0895add0
|
reset counter bit in eiger detector partially or completely
|
2015-11-17 16:39:36 +01:00 |
|
Dhanya Maliakal
|
66db11421f
|
implemented fifo depth configurable from client
|
2015-11-17 10:30:53 +01:00 |
|
Dhanya Maliakal
|
a770389c90
|
including subframe index from receiver to client and also sending this to gui
|
2015-09-23 11:50:02 +02:00 |
|
Dhanya Maliakal
|
584b9e6036
|
added gain and offsets to the shared memory, that are sent along with sls_detector_module, only for eiger
|
2015-09-04 15:54:12 +02:00 |
|
|
|
84ad2912c6
|
Merge branch 'master' of gitorious.psi.ch:sls_det_software/sls_detector_software
|
2015-08-28 10:55:22 +02:00 |
|
Dhanya Maliakal
|
0d83346943
|
continuous and storeinram variable
|
2015-07-24 09:21:38 +02:00 |
|
|
|
de0f35afb3
|
some jctb changes
|
2015-06-12 13:00:13 +02:00 |
|
|
|
ba377ec273
|
Command adcreg added to write to adc registers
|
2015-05-04 13:48:46 +02:00 |
|
Dhanya Maliakal
|
7e44648da9
|
different between acquisition index and frame index
|
2015-03-12 12:22:19 +01:00 |
|
Dhanya Maliakal
|
85ccf64175
|
print receiver configurations for all detectors added
|
2015-03-02 13:56:23 +01:00 |
|
|
|
327c2106df
|
Some fixes for the CTB
|
2014-10-14 17:43:25 +02:00 |
|
|
|
308b3aa9b1
|
Client and jungfrau server funcs added for pattern generator
|
2014-10-14 17:03:13 +02:00 |
|
