cleaned up gh-pages moved stuff from devdoc

9.1.1/_sources/servers.rst.txt

@@ -0,0 +1,99 @@
+Getting Started
+===============
+
+Detector Servers include:
+   * Control server [default port: 1952]
+      * Almost all client communication.
+   * Stop server [default port: 1953]
+      *  Client requests for detector status, stop acquisition, temperature, advanced read/write registers.
+
+When using a blocking acquire command (sls_detector_acquire or Detector::acquire), the control server is blocked until end of acquisition. However, stop server commands could be used in parallel.
+
+
+Location
+---------
+   slsDetectorPackage/serverBin/ folder in every release.
+
+
+.. _Detector Server Arguments:
+
+Arguments
+---------
+
+   .. code-block:: bash  
+
+      Possible arguments are:
+         -v, --version            : Software version
+         -p, --port <port>        : TCP communication port with client. 
+         -g, --nomodule           : [Mythen3][Gotthard2] 
+                                    Generic or No Module mode. Skips detector type checks. 
+         -f, --phaseshift <value> : [Gotthard] only. Sets phase shift. 
+         -d, --devel              : Developer mode. Skips firmware checks. 
+         -u, --update             : Update mode. Skips firmware checks and initial detector setup. 
+         -i, --ignore-config      : [Eiger][Jungfrau][Gotthard][Gotthard2][Moench] 
+                                    Ignore config file. 
+         -m, --master <master>    : [Eiger][Mythen3][Gotthard][Gotthard2] 
+                                    Set Master to 0 or 1. Precedence over config file. Only for virtual servers except Eiger. 
+         -t, --top <top>          : [Eiger] Set Top to 0 or 1. Precedence over config file. 
+         -s, --stopserver         : Stop server. Do not use as it is created by control server 
+
+
+.. _Automatic start servers:
+
+Automatic start 
+------------------
+
+One can start the on-board detector server automatically upon powering on the board.
+
+#. Create a soft link to the binary on board:
+      .. code-block:: bash
+      
+         ln -sf someDetectorServervx.x.x someDetectorServer
+
+
+
+#. Do the following depending on the detector type :
+
+   Eiger
+      .. code-block:: bash
+         
+         # create script in rc5.d on the board
+         vi /etc/rc5.d/S50board_com.sh
+
+         # enter the following (edit server name)
+         #! /bin/sh
+         /home/root/executables/eigerDetectorServer &> /dev/null &
+         exit 0
+
+   Jungfrau | Moench | CTB | Gotthard I
+      .. code-block:: bash
+
+         # Edit inittab on board
+         vi /etc/inittab
+
+         # enter the following line
+         ttyS0::respawn:/./xxxDetectorServer
+
+
+   Gotthard II | Mythen III
+      .. code-block:: bash
+         
+         # create script in init.d on board
+         vi /etc/init.d/S99detServer.sh
+
+         # enter the following (edit server name)
+         #! /bin/sh
+         cd /root >> /dev/null
+         /root/xxxDetectorServer >> /dev/null &
+
+
+#. Sync, reboot and verify:
+      .. code-block:: bash
+      
+         sync
+
+         # physically reboot for Gotthard II or Mythen III
+         reboot
+
+         # verify
+         ps -ef | grep xxxDetectorServer