cleaned up gh-pages moved stuff from devdoc

9.0.0/_sources/receivers.rst.txt

@@ -0,0 +1,38 @@
+Receivers
+=================
+
+Receiver processes can be run on same or different machines as the client, receives the data from the detector (via UDP packets).
+When using the slsReceiver/ slsMultiReceiver, they can be further configured by the client control software (via TCP/IP) to set file name, file path, progress of acquisition etc.
+
+
+To know more about detector receiver configuration, please check out :ref:`detector udp header and udp commands in the config file <detector udp header>`
+
+Custom Receiver
+----------------
+
+| When using  custom receiver with our package, ensure that **udp_dstmac** is also configured in the config file. This parameter is not required when using slsReceiver.
+
+| Cannot use "auto" for **udp_dstip**.
+
+| Also ensure that there are no **rx_** commands in the config file. These commands are for configuring the slsReceiver.
+
+Example of a custom receiver config file
+
+* The main difference is the lack of **rx_** commands or file commands (eg. fwrite, fpath) and the udp_dstmac is required in config file.
+
+.. code-block:: bash
+
+    # detector hostname
+    hostname bchip052
+
+    # udp destination port (receiver)
+    udp_dstport 50004
+
+    # udp destination ip (receiver)
+    udp_dstip 10.0.1.100
+
+    # udp source ip (same subnet as udp_dstip)
+    udp_srcip 10.0.1.184
+
+    # udp destination mac
+    udp_dstmac 22:47:d5:48:ad:ef