cleaned up gh-pages moved stuff from devdoc

10.0.0/_sources/receivers.rst.txt

@@ -0,0 +1,38 @@
+Custom Receiver
+=================
+
+The receiver essentially listens to UDP data packets sent out by the detector.
+
+To know more about detector receiver setup in the config file, please check out :ref:`the detector-receiver UDP configuration in the config file<detector udp header config>` and the :ref:`detector udp format<detector udp header>`.
+
+
+| Please note the following when using a custom receiver:
+
+* **udp_dstmac** must be configured in the config file. This parameter is not required when using an in-built receiver.
+
+* Cannot use "auto" for **udp_dstip**.
+
+* No **rx_** commands in the config file. These commands are for configuring the slsReceiver.
+
+
+
+The main difference is the lack of **rx_** commands or file commands (eg. **f**write, **f**path) and the **udp_dstmac** is required in config file.
+
+Example of a custom receiver config file
+
+.. code-block:: bash
+
+    # detector hostname
+    hostname bchip052
+
+    # udp destination port (receiver)
+    udp_dstport 50004
+
+    # udp destination ip (receiver)
+    udp_dstip 10.0.1.100
+
+    # udp source ip (same subnet as udp_dstip)
+    udp_srcip 10.0.1.184
+
+    # udp destination mac
+    udp_dstmac 22:47:d5:48:ad:ef