From fd1f6d1ec680a0654b21686bdf2ad453c73eb4a9 Mon Sep 17 00:00:00 2001 From: l_msdetect Date: Thu, 14 Jul 2016 13:17:22 +0200 Subject: [PATCH] update manual --- manual/manual-client/Eiger_short.tex | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/manual/manual-client/Eiger_short.tex b/manual/manual-client/Eiger_short.tex index 315a94e32..f2e469243 100644 --- a/manual/manual-client/Eiger_short.tex +++ b/manual/manual-client/Eiger_short.tex @@ -65,7 +65,7 @@ We would recommend expert users (beamline people) to write their parameters file You will then need to setup the detector threshold and settings, the exposure time, the number of real time frames and eventually how many real time frames should be acquired: \begin{verbatim} -sls_detector_put settings standard +sls_detector_put settings [standard/highgain/lowgain] sls_detector_put threshold 6000 sls_detector_put exptime 1. sls_detector_put frames 10 @@ -75,6 +75,8 @@ In this case 10 consecutive 1s frames will be acquired.\\ For \E, at the moment 3 settings are possible: {\tt{standard}}, {\tt{lowgain}} and {\tt{highgain}}. According to the setting chosen, one can reach different energies. Refer to the settings requirements for your detector.\\ Notice that the option {\tt{settings standard/highgain/lowgain}} actually loads the trimbit files so it is time consuming. Only setting the {\tt{threshold}} does not load trimbit files. +The threshold is expressed in (eV) as the proper threshold setting, i.e. normally is set to 50\% of the beam energy. + \underline{At cSAXS, the {\tt{settingsdir}} and {\tt{caldir}} are in}\\\underline{/sls/X12SA/data/x12saop/EigerPackage/calibrations/}\\ You need to setup where the files will be written to