detectors/slsDetectorPackage
25
0
Fork 0
mirror of https://github.com/slsdetectorgroup/slsDetectorPackage.git synced 2025-04-23 15:00:02 +02:00
Code Issues Actions Packages Releases Activity

manual

Browse Source
This commit is contained in:
Gemma Tinti 2019-03-21 16:29:36 +01:00
parent c89fad45a9
commit c5178bc4de
2 changed files with 9 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

BIN
manual/manual-client/Eiger-Chips.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 34 KiB

11
manual/manual-client/Eiger_short.tex
View File

@ -156,6 +156,14 @@ outdir /sls/X12SA/data/x12saop/Data10/Eiger0.5M
threaded 1
\end{verbatim}
The geometry on af an EIGER module, showing the quadrants corresponding to the udp ports and the 2 receivers is shown in figure~\ref{fig:eigerports}.
\begin{figure}[t]
\begin{center}
\includegraphics[width=0.9\textwidth]{Eiger-Chips}
\end{center}
\caption{Geometry of UDP ports and receivers in a singel module.}
\label{fig:eigerports}
\end{figure}
In the case you are developing your own receiver, then you need to remove the 1Gb receiver hostname {\tt{rx\_hostname}} and substitute it with the mac address of the device:
\begin{verbatim}
@ -163,7 +171,6 @@ configuremac 0
rx_udpmac xx:xx:...
\end{verbatim}
One can configure all the detector settings in a parameter file {\tt{setup.det}}, which is loaded by doing:
\begin{verbatim}
sls_detector_put 0-parameters setup.det
@ -712,7 +719,7 @@ To activate back a module, do:
\end{verbatim}
\end{itemize}
\subsection{Setting up 10Gb and the PC settings for highframe rate experiments}\label{10g}
\section{Setting up the PC settings for 10Gb}\label{10g}
For configuring well the 10Gb card not to loose packets,
\begin{itemize}