From c1ea73d21ce98462a7e75193b0755bd91d3e0d02 Mon Sep 17 00:00:00 2001 From: Dhanya Maliakal Date: Fri, 18 Aug 2017 14:03:11 +0200 Subject: [PATCH] some changes for release txt --- RELEASE.txt | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/RELEASE.txt b/RELEASE.txt index 32ce5b1f6..2ed670b59 100644 --- a/RELEASE.txt +++ b/RELEASE.txt @@ -43,11 +43,11 @@ Reiterating, both 2.3 and 3.0 supports the following features: Receiver -------- 1. The files will be written in this format in the binary mode: - * ASCII file: header of 1024 bytes (only for EIGER detectors) + * 1 ASCII file per measurement: header with measurement parameters * binary files: series of images, each preceded by a Standard Image Header (header described below) - 2. Stanard Image Header in file and call back + 2. Standard Image Header in file and call back arguments defined. It is in the following format defined as sls_detector_header defined in slsReceiverSoftware/include/sls_receiver_defs.h @@ -107,7 +107,10 @@ New Features General ------- 3. UDP Packets from all the detectors will contain the standard sls detector header. - X, Y and Z Coordinates define the position of the detector in 3d. + Jungfrau will have an extra 6 bytes preceding the standard header in the udp packets + only. X, Y and Z Coordinates define the position of the detector in 3d. These values + are not filled in the udp header at the moment, but will be in the files and receiver + call backs with only x in 1d at the moment. 4. When acquire has started, one can use sls_detector_get busy to check the status of the acquire. 1 is running 0 is idle. This way one can start acqusition with &,