ctb: enable tengiga in server and moved everything to list implementation

slsDetectorServers/ctbDetectorServer/slsDetectorFunctionList.c

@@ -3,7 +3,8 @@
 #include "versionAPI.h"
 #include "logger.h"
 
-
+#include "communication_funcs_UDP.h"
+#include "UDPPacketHeaderGenerator.h"
 #include "AD9257.h"		// commonServerFunctions.h, blackfin.h, ansi.h
 #include "AD7689.h"     // slow adcs
 #include "LTC2620.h"    // dacs
@@ -22,8 +23,10 @@
 
 // Global variable from slsDetectorServer_funcs
 extern int debugflag;
-extern int dataBytes;
+
-extern char* ramValues;
+// Global variable from UDPPacketHeaderGenerator
+extern uint64_t udpFrameNumber;
+extern uint32_t udpPacketNumber;
 
 int firmware_compatibility = OK;
 int firmware_check_done = 0;
@@ -35,6 +38,9 @@ int virtual_status = 0;
 int virtual_stop = 0;
 #endif
 
+int dataBytes = 0;
+char* ramValues = 0;
+char udpPacketData[UDP_PACKET_DATA_BYTES + sizeof(sls_detector_header)];
 
 int32_t clkPhase[NUM_CLOCKS] = {0, 0, 0, 0};
 uint32_t clkDivider[NUM_CLOCKS] = {40, 20, 20, 200};
@@ -540,8 +546,8 @@ void setupDetector() {
 	setTimer(DELAY_AFTER_TRIGGER, DEFAULT_DELAY);
 	setTiming(DEFAULT_TIMING_MODE);
 
-	// send via tcp (moench via udp with configuremac)
+	// 1G UDP
-    sendUDP(0);
+	enableTenGigabitEthernet(0);
     // clear roi
     {
         int ret = OK, retvalsize = 0;
@@ -1499,89 +1505,109 @@ long int calcChecksum(int sourceip, int destip) {
 
 int configureMAC(uint32_t destip, uint64_t destmac, uint64_t sourcemac, uint32_t sourceip, uint32_t udpport, uint32_t udpport2){
 #ifdef VIRTUAL
-    return OK;
+	return OK;
 #endif
 	FILE_LOG(logINFOBLUE, ("Configuring MAC\n"));
-	/*uint32_t sourceport  =  DEFAULT_TX_UDP_PORT;
+	// 1 giga udp
+	if (!enableTenGigabitEthernet(-1)) {
+		char cDestIp[MAX_STR_LENGTH];
+		memset(cDestIp, 0, MAX_STR_LENGTH);
+		sprintf(cDestIp, "%d.%d.%d.%d", (destip>>24)&0xff,(destip>>16)&0xff,(destip>>8)&0xff,(destip)&0xff);
+		FILE_LOG(logINFO, ("1G UDP: Destination (IP: %s, port:%d)\n", cDestIp, udpport));
+		if (setUDPDestinationDetails(cDestIp, udpport) == FAIL) {
+			FILE_LOG(logERROR, ("could not set udp 1G destination IP and port\n"));
+			return FAIL;
+		}
+		return OK;
+	}
 
-	FILE_LOG(logINFO, ("\tSource IP   : %d.%d.%d.%d \t\t(0x%08x)\n",
+	// 10 G
-	        (sourceip>>24)&0xff,(sourceip>>16)&0xff,(sourceip>>8)&0xff,(sourceip)&0xff, sourceip));
+	else {
-	FILE_LOG(logINFO, ("\tSource MAC  : %02x:%02x:%02x:%02x:%02x:%02x \t(0x%010llx)\n",
+		uint32_t sourceport  =  DEFAULT_TX_UDP_PORT;
-			(unsigned int)((sourcemac>>40)&0xFF),
-			(unsigned int)((sourcemac>>32)&0xFF),
-			(unsigned int)((sourcemac>>24)&0xFF),
-			(unsigned int)((sourcemac>>16)&0xFF),
-			(unsigned int)((sourcemac>>8)&0xFF),
-			(unsigned int)((sourcemac>>0)&0xFF),
-			(long  long unsigned int)sourcemac));
-	FILE_LOG(logINFO, ("\tSource Port : %d \t\t\t(0x%08x)\n",sourceport, sourceport));
 
-	FILE_LOG(logINFO, ("\tDest. IP    : %d.%d.%d.%d \t\t(0x%08x)\n",
+		FILE_LOG(logINFO, ("\tSource IP   : %d.%d.%d.%d \t\t(0x%08x)\n",
-	        (destip>>24)&0xff,(destip>>16)&0xff,(destip>>8)&0xff,(destip)&0xff, destip));
+				(sourceip>>24)&0xff,(sourceip>>16)&0xff,(sourceip>>8)&0xff,(sourceip)&0xff, sourceip));
-	FILE_LOG(logINFO, ("\tDest. MAC   : %02x:%02x:%02x:%02x:%02x:%02x \t(0x%010llx)\n",
+		FILE_LOG(logINFO, ("\tSource MAC  : %02x:%02x:%02x:%02x:%02x:%02x \t(0x%010llx)\n",
-			(unsigned int)((destmac>>40)&0xFF),
+				(unsigned int)((sourcemac>>40)&0xFF),
-			(unsigned int)((destmac>>32)&0xFF),
+				(unsigned int)((sourcemac>>32)&0xFF),
-			(unsigned int)((destmac>>24)&0xFF),
+				(unsigned int)((sourcemac>>24)&0xFF),
-			(unsigned int)((destmac>>16)&0xFF),
+				(unsigned int)((sourcemac>>16)&0xFF),
-			(unsigned int)((destmac>>8)&0xFF),
+				(unsigned int)((sourcemac>>8)&0xFF),
-			(unsigned int)((destmac>>0)&0xFF),
+				(unsigned int)((sourcemac>>0)&0xFF),
-			(long  long unsigned int)destmac));
+				(long  long unsigned int)sourcemac));
-	FILE_LOG(logINFO, ("\tDest. Port  : %d \t\t\t(0x%08x)\n",udpport, udpport));
+		FILE_LOG(logINFO, ("\tSource Port : %d \t\t\t(0x%08x)\n",sourceport, sourceport));
 
-	long int checksum=calcChecksum(sourceip, destip);
+		FILE_LOG(logINFO, ("\tDest. IP    : %d.%d.%d.%d \t\t(0x%08x)\n",
-	bus_w(TX_IP_REG, sourceip);
+				(destip>>24)&0xff,(destip>>16)&0xff,(destip>>8)&0xff,(destip)&0xff, destip));
-	bus_w(RX_IP_REG, destip);
+		FILE_LOG(logINFO, ("\tDest. MAC   : %02x:%02x:%02x:%02x:%02x:%02x \t(0x%010llx)\n",
+				(unsigned int)((destmac>>40)&0xFF),
+				(unsigned int)((destmac>>32)&0xFF),
+				(unsigned int)((destmac>>24)&0xFF),
+				(unsigned int)((destmac>>16)&0xFF),
+				(unsigned int)((destmac>>8)&0xFF),
+				(unsigned int)((destmac>>0)&0xFF),
+				(long  long unsigned int)destmac));
+		FILE_LOG(logINFO, ("\tDest. Port  : %d \t\t\t(0x%08x)\n",udpport, udpport));
 
-	uint32_t val = 0;
+		long int checksum=calcChecksum(sourceip, destip);
+		bus_w(TX_IP_REG, sourceip);
+		bus_w(RX_IP_REG, destip);
 
-	val = ((sourcemac >> LSB_OF_64_BIT_REG_OFST) & BIT_32_MSK);
+		uint32_t val = 0;
-	bus_w(TX_MAC_LSB_REG, val);
-	FILE_LOG(logDEBUG1, ("Read from TX_MAC_LSB_REG: 0x%08x\n", bus_r(TX_MAC_LSB_REG)));
 
-	val = ((sourcemac >> MSB_OF_64_BIT_REG_OFST) & BIT_32_MSK);
+		val = ((sourcemac >> LSB_OF_64_BIT_REG_OFST) & BIT_32_MSK);
-	bus_w(TX_MAC_MSB_REG,val);
+		bus_w(TX_MAC_LSB_REG, val);
-	FILE_LOG(logDEBUG1, ("Read from TX_MAC_MSB_REG: 0x%08x\n", bus_r(TX_MAC_MSB_REG)));
+		FILE_LOG(logDEBUG1, ("Read from TX_MAC_LSB_REG: 0x%08x\n", bus_r(TX_MAC_LSB_REG)));
 
-	val = ((destmac >> LSB_OF_64_BIT_REG_OFST) & BIT_32_MSK);
+		val = ((sourcemac >> MSB_OF_64_BIT_REG_OFST) & BIT_32_MSK);
-	bus_w(RX_MAC_LSB_REG, val);
+		bus_w(TX_MAC_MSB_REG,val);
-	FILE_LOG(logDEBUG1, ("Read from RX_MAC_LSB_REG: 0x%08x\n", bus_r(RX_MAC_LSB_REG)));
+		FILE_LOG(logDEBUG1, ("Read from TX_MAC_MSB_REG: 0x%08x\n", bus_r(TX_MAC_MSB_REG)));
 
-	val = ((destmac >> MSB_OF_64_BIT_REG_OFST) & BIT_32_MSK);
+		val = ((destmac >> LSB_OF_64_BIT_REG_OFST) & BIT_32_MSK);
-	bus_w(RX_MAC_MSB_REG, val);
+		bus_w(RX_MAC_LSB_REG, val);
-	FILE_LOG(logDEBUG1, ("Read from RX_MAC_MSB_REG: 0x%08x\n", bus_r(RX_MAC_MSB_REG)));
+		FILE_LOG(logDEBUG1, ("Read from RX_MAC_LSB_REG: 0x%08x\n", bus_r(RX_MAC_LSB_REG)));
 
-	val = (((sourceport << UDP_PORT_TX_OFST) & UDP_PORT_TX_MSK) |
+		val = ((destmac >> MSB_OF_64_BIT_REG_OFST) & BIT_32_MSK);
-			((udpport << UDP_PORT_RX_OFST) & UDP_PORT_RX_MSK));
+		bus_w(RX_MAC_MSB_REG, val);
-	bus_w(UDP_PORT_REG, val);
+		FILE_LOG(logDEBUG1, ("Read from RX_MAC_MSB_REG: 0x%08x\n", bus_r(RX_MAC_MSB_REG)));
-	FILE_LOG(logDEBUG1, ("Read from UDP_PORT_REG: 0x%08x\n", bus_r(UDP_PORT_REG)));
 
-	bus_w(TX_IP_CHECKSUM_REG,(checksum << TX_IP_CHECKSUM_OFST) & TX_IP_CHECKSUM_MSK);
+		val = (((sourceport << UDP_PORT_TX_OFST) & UDP_PORT_TX_MSK) |
-	FILE_LOG(logDEBUG1, ("Read from TX_IP_CHECKSUM_REG: 0x%08x\n", bus_r(TX_IP_CHECKSUM_REG)));
+				((udpport << UDP_PORT_RX_OFST) & UDP_PORT_RX_MSK));
+		bus_w(UDP_PORT_REG, val);
+		FILE_LOG(logDEBUG1, ("Read from UDP_PORT_REG: 0x%08x\n", bus_r(UDP_PORT_REG)));
+
+		bus_w(TX_IP_CHECKSUM_REG,(checksum << TX_IP_CHECKSUM_OFST) & TX_IP_CHECKSUM_MSK);
+		FILE_LOG(logDEBUG1, ("Read from TX_IP_CHECKSUM_REG: 0x%08x\n", bus_r(TX_IP_CHECKSUM_REG)));
+
+		cleanFifos();//FIXME: resetPerpheral() for ctb?
+		resetPeripheral();
+		usleep(WAIT_TIME_CONFIGURE_MAC); // todo maybe without
+	}
 
-	cleanFifos();//FIXME: resetPerpheral() for ctb?
-	resetPeripheral();
-	usleep(WAIT_TIME_CONFIGURE_MAC); // todo maybe without
-	sendUDP(1);
-*/sendUDP(0);
 	return OK;
 }
 
+int enableTenGigabitEthernet(int val) {
+	uint32_t addr = CONFIG_REG;
+
+	// set
+	if (val != -1) {
+		FILE_LOG(logINFO, ("Setting 10Gbe: %d\n", (val > 0) ? 1 : 0));
+		if (val > 0) {
+			bus_w(addr, bus_r(addr) | CONFIG_GB10_SND_UDP_MSK);
+		} else {
+			bus_w(addr, bus_r(addr) & (~CONFIG_GB10_SND_UDP_MSK));
+		}
+		//configuremac called from client
+	}
+	return  ((bus_r(addr) & CONFIG_GB10_SND_UDP_MSK) >> CONFIG_GB10_SND_UDP_OFST);
+}
+
+
 
 
 /* ctb specific - pll, flashing fpga */
 
-int sendUDP(int enable) {
-    FILE_LOG(logINFO, ("Sending via %s\n", (enable ? "Receiver" : "CPU")));
-
-    uint32_t addr = CONFIG_REG;
-    if (enable > 0)
-        bus_w(addr, bus_r(addr) | CONFIG_GB10_SND_UDP_MSK);
-    else if (enable == 0)
-        bus_w(addr, bus_r(addr) & (~CONFIG_GB10_SND_UDP_MSK));
-
-    FILE_LOG(logDEBUG, ("\tConfig Reg: 0x%x\n", bus_r(addr)));
-    return ((bus_r(addr) & CONFIG_GB10_SND_UDP_MSK) >> CONFIG_GB10_SND_UDP_OFST);
-}
 
 // ind can only be ADC_CLK or DBIT_CLK
 void configurePhase(enum CLKINDEX ind, int val) {
@@ -1980,8 +2006,17 @@ int startStateMachine(){
 	FILE_LOG(logINFOGREEN, ("Virtual Acquisition started\n"));
 	return OK;
 #endif
-	FILE_LOG(logINFOBLUE, ("Starting State Machine\n"));
+	// 1 giga udp
+	if (!enableTenGigabitEthernet(-1)) {
+		// create udp socket
+		if(createUDPSocket() != OK) {
+			return FAIL;
+		}
+		// update header with modId, detType and version. Reset offset and fnum
+		createUDPPacketHeader(udpPacketData, getHardwareSerialNumber());
+	}
 
+	FILE_LOG(logINFOBLUE, ("Starting State Machine\n"));
 	cleanFifos();
 	unsetFifoReadStrobes(); // FIXME: unnecessary to write bus_w(dumm, 0) as it is 0 in the beginnig and the strobes are always unset if set
 
@@ -2091,6 +2126,31 @@ enum runStatus getRunStatus(){
 }
 
 
+void readandSendUDPFrames(int *ret, char *mess) {
+	FILE_LOG(logDEBUG1, ("Reading from 1G UDP\n"));
+
+	// validate udp socket
+	if (getUdPSocketDescriptor() <= 0) {
+		*ret = FAIL;
+		sprintf(mess,"UDP Socket not created. sockfd:%d\n", getUdPSocketDescriptor());
+		FILE_LOG(logERROR, (mess));
+		return;
+	}
+
+	// every frame read
+	while(readFrameFromFifo() == OK) {
+		int bytesToSend = 0, n = 0;
+		while((bytesToSend = fillUDPPacket(udpPacketData))) {
+			n += sendUDPPacket(udpPacketData, bytesToSend);
+		}
+		if (n >= dataBytes) {
+			FILE_LOG(logINFO, (" Frame %lld sent (%d packets, %d databytes, n:%d bytes sent)\n",
+					udpFrameNumber, udpPacketNumber + 1, dataBytes, n));
+		}
+	}
+	closeUDPSocket();
+}
+
 
 void readFrame(int *ret, char *mess) {
 #ifdef VIRTUAL
@@ -2100,19 +2160,30 @@ void readFrame(int *ret, char *mess) {
 	}
 	return;
 #endif
-	while(runBusy()){
+	// 1G
-		usleep(500); // random
+	if (!enableTenGigabitEthernet(-1)) {
+		readandSendUDPFrames(ret, mess);
+	}
+	 // 10G
+	else {
+		// wait for acquisition to be done
+		while(runBusy()){
+			usleep(500); // random
+		}
 	}
 
-	// frames left to give status
+	// ret could be fail in 1gudp for not creating udp sockets
-	int64_t retval = getTimeLeft(FRAME_NUMBER) + 2;
+	if (*ret != FAIL) {
-	if ( retval > 1) {
+		// frames left to give status
-		*ret = (int)FAIL;
+		int64_t retval = getTimeLeft(FRAME_NUMBER) + 2;
-		sprintf(mess,"No data and run stopped: %lld frames left\n",(long  long int)retval);
+		if ( retval > 1) {
-		FILE_LOG(logERROR, (mess));
+			*ret = (int)FAIL;
-	} else {
+			sprintf(mess,"No data and run stopped: %lld frames left\n",(long  long int)retval);
-		*ret = (int)OK;
+			FILE_LOG(logERROR, (mess));
-		FILE_LOG(logINFOGREEN, ("Acquisition successfully finished\n"));
+		} else {
+			*ret = (int)OK;
+			FILE_LOG(logINFOGREEN, ("Acquisition successfully finished\n"));
+		}
 	}
 }
 

slsDetectorServers/eigerDetectorServer/slsDetectorFunctionList.c

@@ -1288,23 +1288,6 @@ int	setDetectorPosition(int pos[]) {
 }
 
 
-
-
-
-/* eiger specific - iodelay, 10g, pulse, rate, temp, activate, delay nw parameter */
-
-int setIODelay(int val) {
-	if (val!=-1) {
-		FILE_LOG(logDEBUG1, ("Setting IO Delay: %d\n",val));
-#ifndef VIRTUAL
-		if (Feb_Control_SetIDelays(Feb_Control_GetModuleNumber(),val))
-#endif
-			eiger_iodelay = val;
-	}
-	return eiger_iodelay;
-}
-
-
 int enableTenGigabitEthernet(int val) {
 	if (val!=-1) {
 		FILE_LOG(logINFO, ("Setting 10Gbe: %d\n", (val > 0) ? 1 : 0));
@@ -1318,6 +1301,21 @@ int enableTenGigabitEthernet(int val) {
 }
 
 
+
+/* eiger specific - iodelay, pulse, rate, temp, activate, delay nw parameter */
+
+int setIODelay(int val) {
+	if (val!=-1) {
+		FILE_LOG(logDEBUG1, ("Setting IO Delay: %d\n",val));
+#ifndef VIRTUAL
+		if (Feb_Control_SetIDelays(Feb_Control_GetModuleNumber(),val))
+#endif
+			eiger_iodelay = val;
+	}
+	return eiger_iodelay;
+}
+
+
 int setCounterBit(int val) {
 	if (val!=-1) {
 		FILE_LOG(logINFO, ("Setting Counter Bit: %d\n",val));

slsDetectorServers/slsDetectorServer/ALTERA_PLL.h

@@ -158,7 +158,7 @@ void ALTERA_PLL_SetPhaseShift(int32_t phase, int clkIndex, int pos) {
              ((clkIndex << ALTERA_PLL_SHIFT_CNT_SELECT_OFST) & ALTERA_PLL_SHIFT_CNT_SELECT_MSK) |
              (pos ? ALTERA_PLL_SHIFT_UP_DOWN_POS_VAL : ALTERA_PLL_SHIFT_UP_DOWN_NEG_VAL));
 
-    FILE_LOG(logDEBUG1, ("\tC%d phase word:0x%08x\n", clkIndex, value));
+    FILE_LOG(logDEBUG1, ("C%d phase word:0x%08x\n", clkIndex, value));
 
     // write phase shift
     ALTERA_PLL_SetPllReconfigReg(ALTERA_PLL_PHASE_SHIFT_REG, value);
@@ -204,7 +204,7 @@ int ALTERA_PLL_SetOuputFrequency (int clkIndex, int pllVCOFreqMhz, int value) {
             ((high_count << ALTERA_PLL_C_COUNTER_HGH_CNT_OFST) & ALTERA_PLL_C_COUNTER_HGH_CNT_MSK) |
             ((odd_division << ALTERA_PLL_C_COUNTER_ODD_DVSN_OFST) & ALTERA_PLL_C_COUNTER_ODD_DVSN_MSK) |
             ((clkIndex << ALTERA_PLL_C_COUNTER_SLCT_OFST) & ALTERA_PLL_C_COUNTER_SLCT_MSK));
-    FILE_LOG(logDEBUG1, ("\tC%d word:0x%08x\n", clkIndex, val));
+    FILE_LOG(logDEBUG1, ("C%d word:0x%08x\n", clkIndex, val));
 
     // write frequency (post-scale output counter C)
     ALTERA_PLL_SetPllReconfigReg(ALTERA_PLL_C_COUNTER_REG, val);

slsDetectorServers/slsDetectorServer/communication_funcs_UDP.h

@@ -21,6 +21,9 @@ unsigned short int udpDestinationPort = 0;
 char udpDestinationIp[MAX_STR_LENGTH] = "";
 
 //DEFAULT_TX_UDP_PORT;// src port
+int getUdPSocketDescriptor() {
+	return udpSockfd;
+}
 
 int setUDPDestinationDetails(const char* ip, unsigned short int port) {
 	udpDestinationPort = port;

slsDetectorServers/slsDetectorServer/slsDetectorFunctionList.h

@@ -220,6 +220,9 @@ int 		configureMAC(uint32_t destip, uint64_t destmac, uint64_t sourcemac, uint32
 #if defined(JUNGFRAUD) || defined(EIGERD)
 int 		setDetectorPosition(int pos[]);
 #endif
+#if defined(CHIPTESTBOARDD) || defined(MOENCHD) || defined(EIGERD)
+int 		enableTenGigabitEthernet(int val);
+#endif
 
 
 // very detector specific
@@ -231,7 +234,6 @@ int         powerChip (int on);
 
 // chip test board specific - sendudp, pll, flashing firmware
 #if defined(CHIPTESTBOARDD) || defined(MOENCHD)
-int         sendUDP(int enable);
 void        configurePhase(enum CLKINDEX ind, int val);
 int         getPhase(enum CLKINDEX ind);
 void        configureFrequency(enum CLKINDEX ind, int val);
@@ -279,10 +281,9 @@ extern int 	startWritingFPGAprogram(FILE** filefp);							// programfpga.h
 extern void stopWritingFPGAprogram(FILE* filefp);							// programfpga.h
 extern int 	writeFPGAProgram(char* fpgasrc, size_t fsize, FILE* filefp);	// programfpga.h
 
-// eiger specific - iodelay, 10g, pulse, rate, temp, activate, delay nw parameter
+// eiger specific - iodelay, pulse, rate, temp, activate, delay nw parameter
 #elif EIGERD
 int 		setIODelay(int val);
-int 		enableTenGigabitEthernet(int val);
 int 		setCounterBit(int val);
 int 		pulsePixel(int n, int x, int y);
 int 		pulsePixelNMove(int n, int x, int y);
@@ -325,6 +326,7 @@ int 		startReadOut();
 enum 		runStatus getRunStatus();
 void 		readFrame(int *ret, char *mess);
 #if defined(CHIPTESTBOARDD) || defined(MOENCHD)
+void 		readandSendUDPFrames(int *ret, char *mess);
 void        unsetFifoReadStrobes();
 void        readSample(int ns);
 int         checkDataPresent();

slsDetectorServers/slsDetectorServer/slsDetectorServer_funcs.c

@@ -3,13 +3,6 @@
 #include "communication_funcs.h"
 #include "logger.h"
 
-#if defined(CHIPTESTBOARDD) || defined(MOENCHD)
-#include "communication_funcs_UDP.h"
-#include "UDPPacketHeaderGenerator.h"
-extern uint64_t udpFrameNumber;
-extern uint32_t udpPacketNumber;
-#endif
-
 #include <string.h>
 #include <arpa/inet.h>
 #include <unistd.h>
@@ -42,10 +35,6 @@ extern char mess[MAX_STR_LENGTH];
 // Variables that will be exported
 int sockfd = 0;
 int debugflag = 0;
-#if defined(CHIPTESTBOARDD) || defined(MOENCHD)
-int dataBytes = 0;
-char* ramValues = 0;
-#endif
 
 // Local variables
 int (*flist[NUM_DET_FUNCTIONS])(int);
@@ -1380,10 +1369,14 @@ int start_acquisition(int file_des) {
 	if (Server_VerifyLock() == OK) {
 		ret = startStateMachine();
 		if (ret == FAIL) {
+#if defined(CHIPTESTBOARDD) || defined(MOENCHD)
+			sprintf(mess, "Could not start acquisition. Could not create udp socket in server. Check rx_udpip & rx_udpport.\n");
+#else
 			sprintf(mess, "Could not start acquisition\n");
+#endif
 			FILE_LOG(logERROR,(mess));
 		}
-		FILE_LOG(logDEBUG1, ("Starting Acquisition ret: %d\n", ret));
+		FILE_LOG(logDEBUG2, ("Starting Acquisition ret: %d\n", ret));
 	}
 	return Server_SendResult(file_des, INT32, UPDATE, NULL, 0);
 }
@@ -1464,10 +1457,14 @@ int start_and_read_all(int file_des) {
 	if (Server_VerifyLock() == OK) {
 		ret = startStateMachine();
 		if (ret == FAIL) {
+#if defined(CHIPTESTBOARDD) || defined(MOENCHD)
+			sprintf(mess, "Could not start acquisition. Could not create udp socket in server. Check rx_udpip & rx_udpport.\n");
+#else
 			sprintf(mess, "Could not start acquisition\n");
+#endif
 			FILE_LOG(logERROR,(mess));
 		}
-		FILE_LOG(logDEBUG1, ("Starting Acquisition ret: %d\n", ret));
+		FILE_LOG(logDEBUG2, ("Starting Acquisition ret: %d\n", ret));
 
 	}
 
@@ -1489,58 +1486,7 @@ int read_all(int file_des) {
 	FILE_LOG(logDEBUG1, ("Reading all frames\n"));
 	// only set
 	if (Server_VerifyLock() == OK) {
-#if defined(CHIPTESTBOARDD) || defined(MOENCHD)
-	    // read from fifo enabled
-      if (!sendUDP(-1)) {
-    	  FILE_LOG(logDEBUG1, ("Reading from 1G UDP\n"));
-
-    	  if (setUDPDestinationDetails("129.129.205.171", 50001) == OK) { // 10g,1 g
-
-    		  if (createUDPSocket() == OK) {
-
-    			  char buffer[UDP_PACKET_DATA_BYTES + sizeof(sls_detector_header)];
-    			  createUDPPacketHeader(buffer, getHardwareSerialNumber());
-
-    	          // keep reading frames
-    	          while(readFrameFromFifo() == OK) {
-
-    	        	  int bytesToSend = 0;
-    	        	  int n = 0;
-    	        	  // fill packet with pnum, nsamples per packet and data
-    		          while((bytesToSend = fillUDPPacket(buffer))) {
-    	        		  n += sendUDPPacket(buffer, bytesToSend);
-    	        	  }
-    		          if (n >= dataBytes)
-    		        	  FILE_LOG(logINFO, (" Frame %lld sent (%d packets, %d databytes, n:%d bytes sent)\n",
-    		        			  udpFrameNumber, udpPacketNumber + 1, dataBytes, n));
-    	          }
-
-    			  closeUDPSocket();
-    		  }
-    	  }
-
-
-          // finished readng frames
-          // frames left to give status
-          int64_t retval = getTimeLeft(FRAME_NUMBER) + 2;
-          if ( retval > 1) {
-              ret = FAIL;
-              sprintf(mess,"No data and run stopped: %lld frames left\n",(long  long int)retval);
-              FILE_LOG(logERROR, (mess));
-          } else {
-              ret = OK; // send number of bytes (8)  first to acknowledge finish of acquisition //FIXME
-              FILE_LOG(logINFOGREEN, ("Acquisition successfully finished\n"));
-          }
-            Server_SendResult(file_des, INT32, UPDATE, NULL, 0); // to the client
-      }
-      // read from receiver
-      else {
-    	  FILE_LOG(logDEBUG1, ("Reading via UDP\n"));
-    	  readFrame(&ret, mess);
-      }
-#else
 		readFrame(&ret, mess);
-#endif
 	}
 	return Server_SendResult(file_des, INT32, UPDATE, NULL, 0);
 }
@@ -2246,9 +2192,9 @@ int configure_mac(int file_des) {
 	{
 		int iloop = 5;
 		for (iloop = 5; iloop >= 0; --iloop) {
-			FILE_LOG(logDEBUG1, ("%x", (unsigned int)(((dstMac >> (8 * iloop)) & 0xFF))));
+			printf ("%x", (unsigned int)(((dstMac >> (8 * iloop)) & 0xFF)));
 			if (iloop > 0) {
-				FILE_LOG(logDEBUG1, (":"));
+				printf(":");
 			}
 		}
 	}
@@ -2269,9 +2215,9 @@ int configure_mac(int file_des) {
 	{
 		int iloop = 5;
 		for (iloop = 5; iloop >= 0; --iloop) {
-			FILE_LOG(logDEBUG1, ("%x", (unsigned int)(((srcMac >> (8 * iloop)) & 0xFF))));
+			printf("%x", (unsigned int)(((srcMac >> (8 * iloop)) & 0xFF)));
 			if (iloop > 0) {
-				FILE_LOG(logDEBUG1, (":"));
+				printf(":");
 			}
 		}
 	}
@@ -2489,7 +2435,7 @@ int enable_ten_giga(int file_des) {
 		return printSocketReadError();
 	FILE_LOG(logDEBUG1, ("Enable/ Disable 10GbE : %d\n", arg));
 
-#ifndef EIGERD
+#if defined(JUNGFRAUD) || defined(GOTTHARDD)
 	functionNotImplemented();
 #else
 	// set & get