diff --git a/slsDetectorServers/jungfrauDetectorServer/bin/jungfrauDetectorServer_developer b/slsDetectorServers/jungfrauDetectorServer/bin/jungfrauDetectorServer_developer
index 14eca3a6d..ef8523e99 100755
Binary files a/slsDetectorServers/jungfrauDetectorServer/bin/jungfrauDetectorServer_developer and b/slsDetectorServers/jungfrauDetectorServer/bin/jungfrauDetectorServer_developer differ
diff --git a/slsDetectorServers/jungfrauDetectorServer/slsDetectorFunctionList.c b/slsDetectorServers/jungfrauDetectorServer/slsDetectorFunctionList.c
index df2fb0a1a..fcc8c6247 100644
--- a/slsDetectorServers/jungfrauDetectorServer/slsDetectorFunctionList.c
+++ b/slsDetectorServers/jungfrauDetectorServer/slsDetectorFunctionList.c
@@ -1724,8 +1724,82 @@ int powerChip(int on) {
             LOG(logINFOBLUE, ("Powering chip: on\n"));
             bus_w(CHIP_POWER_REG,
                   bus_r(CHIP_POWER_REG) | CHIP_POWER_ENABLE_MSK);
-            
+   
             configureChip();
+
+            if (getChipVersion() == 11) {
+                enum timingMode prevTiming = getTiming(); 
+
+                // to change dstip of entry 0 to 0 (to not send out anything)
+                int numInterfaces = getNumberofUDPInterfaces();
+                int selInterface = getPrimaryInterface();
+                // corner case: round robin, might not start at entry 0
+                uint32_t addr_outer = RXR_ENDPOINT_OUTER_START_REG;
+                udp_header *udp_outer = (udp_header *)(Blackfin_getBaseAddress() + addr_outer / 2);
+                uint32_t addr_inner = RXR_ENDPOINT_INNER_START_REG;
+                udp_header *udp_inner = (udp_header *)(Blackfin_getBaseAddress() + addr_inner / 2);
+
+                LOG(logINFO, ("\tSetting timing to auto (temp solution)\n"));
+                setTiming(AUTO_TIMING);
+
+                // setting dstip of entry 0 to 0
+                if (numInterfaces == 2) {
+                    LOG(logINFO, ("\tSetting dest ip (outer) to 0.0.0.0 (temp solution)\n"));
+                    udp_outer->ip_destip_msb = (uint16_t)0;
+                    udp_outer->ip_destip_lsb = (uint16_t)0;
+                    LOG(logINFO, ("\tSetting dest ip (inner) to 0.0.0.0 (temp solution)\n"));
+                    udp_inner->ip_destip_msb = (uint16_t)0;
+                    udp_inner->ip_destip_lsb = (uint16_t)0;
+                } else{
+                    if (selInterface == 0) {
+                        LOG(logINFO, ("\tSetting dest ip (outer) to 0.0.0.0 (temp solution)\n"));
+                        udp_outer->ip_destip_msb = (uint16_t)0;
+                        udp_outer->ip_destip_lsb = (uint16_t)0;
+                    } else {
+                        LOG(logINFO, ("\tSetting dest ip (inner) to 0.0.0.0 (temp solution)\n"));
+                        udp_inner->ip_destip_msb = (uint16_t)0;
+                        udp_inner->ip_destip_lsb = (uint16_t)0;
+                    }
+                }
+
+
+                LOG(logINFO, ("\tStarting acq (temp solution)\n"));
+                    bus_w(CONTROL_REG, bus_r(CONTROL_REG) | CONTROL_START_ACQ_MSK);
+                    bus_w(CONTROL_REG, bus_r(CONTROL_REG) & ~CONTROL_START_ACQ_MSK);
+                
+                LOG(logINFO, ("\tStopping acq (temp solution)\n"));
+                bus_w(CONTROL_REG, bus_r(CONTROL_REG) | CONTROL_STOP_ACQ_MSK);
+                usleep(100);
+                bus_w(CONTROL_REG, bus_r(CONTROL_REG) & ~CONTROL_STOP_ACQ_MSK);
+
+                LOG(logINFO, ("\tSetting timing back to %s (temp solution)\n", (prevTiming == AUTO_TIMING? "auto" : "trigger")));
+                setTiming(prevTiming);
+
+                // setting ip back
+                uint32_t ip = udpDetails[0].dstip;
+                uint32_t ip2 = udpDetails[0].dstip;
+                char dst_ip[INET_ADDRSTRLEN], dst_ip2[INET_ADDRSTRLEN];
+                getIpAddressinString(dst_ip, ip);
+                getIpAddressinString(dst_ip2, ip2);
+                if (numInterfaces == 2) {
+                    LOG(logINFO, ("\tSetting dest ip (outer) to %s (temp solution)\n", dst_ip));
+                    udp_outer->ip_destip_msb = (uint16_t)((ip >> 16) & BIT16_MASK);
+                    udp_outer->ip_destip_lsb = (uint16_t)((ip >> 0) & BIT16_MASK);
+                    LOG(logINFO, ("\tSetting dest ip (inner) to %s (temp solution)\n", dst_ip2));
+                    udp_inner->ip_destip_msb = (uint16_t)((ip2 >> 16) & BIT16_MASK);
+                    udp_inner->ip_destip_lsb = (uint16_t)((ip2 >> 0) & BIT16_MASK);
+                } else{
+                    if (selInterface == 0) {
+                        LOG(logINFO, ("\tSetting dest ip (outer) to %s (temp solution)\n", dst_ip));
+                        udp_outer->ip_destip_msb = (uint16_t)((ip >> 16) & BIT16_MASK);
+                        udp_outer->ip_destip_lsb = (uint16_t)((ip >> 0) & BIT16_MASK);
+                    } else {
+                        LOG(logINFO, ("\tSetting dest ip (inner) to %s (temp solution)\n", dst_ip));
+                        udp_inner->ip_destip_msb = (uint16_t)((ip >> 16) & BIT16_MASK);
+                        udp_inner->ip_destip_lsb = (uint16_t)((ip >> 0) & BIT16_MASK);
+                    }
+                }
+	        }	
         } else {
             LOG(logINFOBLUE, ("Powering chip: off\n"));
             bus_w(CHIP_POWER_REG,
@@ -1766,6 +1840,7 @@ void configureChip() {
         // write same register values back to configure chip
         bus_w(CONFIG_V11_REG, bus_r(CONFIG_V11_REG));
 
+	    LOG(logINFOBLUE, ("\tChip configured\n"));
         chipConfigured = 1;
     }
 }