Merge branch 'developer' into jf_h5reader

2025-04-26 16:20:03 +02:00 · 2024-12-02 15:06:48 +01:00 · 2024-12-02 15:06:48 +01:00 · 7608d6392c
commit 7608d6392c
parent adcaf6b3df e83527adee
21 changed files with 173 additions and 168 deletions
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@ -4,7 +4,7 @@ cmake_minimum_required(VERSION 3.14)
 project(slsDetectorPackage)

 # Read VERSION file into project version
-set(VERSION_FILE "${CMAKE_SOURCE_DIR}/VERSION")
+set(VERSION_FILE "${CMAKE_CURRENT_SOURCE_DIR}/VERSION")
 file(READ "${VERSION_FILE}" VERSION_CONTENT)
 string(STRIP "${VERSION_CONTENT}" PROJECT_VERSION_STRING)
 set(PROJECT_VERSION ${PROJECT_VERSION_STRING})
@ -304,19 +304,20 @@ if (SLS_USE_INTEGRATION_TESTS)
 endif (SLS_USE_INTEGRATION_TESTS)

 if (SLS_USE_PYTHON)
-    find_package (Python 3.6 COMPONENTS Interpreter Development)
+    find_package (Python 3.8 COMPONENTS Interpreter Development)
    if(SLS_FETCH_PYBIND11_FROM_GITHUB)
        FetchContent_Declare(
            pybind11
            GIT_REPOSITORY https://github.com/pybind/pybind11
-            GIT_TAG        v2.11.0
+            GIT_TAG        v2.13.6
        )

    else()
+    # https://github.com/pybind/pybind11/releases
        FetchContent_Declare(
            pybind11
-            URL ${CMAKE_SOURCE_DIR}/libs/pybind11/v2.11.0.tar.gz
-            URL_HASH MD5=90c4946e87c64d8d8fc0ae4edf35d780
+            URL ${CMAKE_CURRENT_SOURCE_DIR}/libs/pybind11/v2.13.6.tar.gz
+            URL_HASH MD5=a04dead9c83edae6d84e2e343da7feeb
        )
    endif()
    FetchContent_MakeAvailable(pybind11)
@ -355,5 +356,3 @@ if(SLS_MASTER_PROJECT)
    set(PROJECT_LIBRARIES slsSupportShared slsDetectorShared slsReceiverShared)
    include(cmake/package_config.cmake)
 endif()
-
-install(FILES ${CMAKE_SOURCE_DIR}/VERSION DESTINATION ${CMAKE_INSTALL_PREFIX})
--- a/README.md
+++ b/README.md
@ -2,7 +2,11 @@
 Before building from source make sure that you have the [software wiki](https://slsdetectorgroup.github.io/devdoc/dependencies.html) installed. If installing using conda, conda will manage the dependencies. Avoid also installing packages with pip. 

 ## Documentaion
-Detailed documentation can be found in the [software wiki](https://slsdetectorgroup.github.io/devdoc/index.html) and on the [official site](https://www.psi.ch/en/detectors/software).
+Detailed documentation including installation can be found in the [software wiki](https://slsdetectorgroup.github.io/devdoc/index.html).
+
+Different releases can be found on the [official site](https://www.psi.ch/en/lxn/software-releases).
+
+Firmware compatiblity can be found in [firmware page](https://github.com/slsdetectorgroup/slsDetectorFirmware)

 ## Installation

@ -42,33 +46,20 @@ conda search slsdet
 conda search slsdetgui
 ```

-### 2. Build from source
+## 2. Build from source

-##### 2.1 Download Source Code from github
+### 2.1 Download Source Code from github
 ```
 git clone https://github.com/slsdetectorgroup/slsDetectorPackage.git --branch 7.0.0
 ```

-**Pybind for Python**<br>
-* **v7.0.0+**:
-pybind11 packaged into 'libs/pybind'. No longer a submodule. No need for "recursive" or "submodule update".
- 
-* **Older versions**:
-   pybind11 is a submodule. Must be cloned using "recursive" and updated when switching between versions using the following commands.
-
-```
-# clone using recursive to get pybind11 submodule
-git clone --recursive https://github.com/slsdetectorgroup/slsDetectorPackage.git
-
-# update submodule when switching between releases
-cd slsDetectorPackage
-git submodule update --init
-```
-
-##### 2.2 Build from source
+> **Note:** For v6.x.x of slsDetectorPackage and older, refer [pybind11 notes on cloning](#Pybind-and-Zeromq).


-###### Build using CMake
+### 2.2 Build from source
+
+
+### Build using CMake

 ```
 # outside slsDetecorPackage folder
@ -94,26 +85,28 @@ Instead of the cmake command, one can use ccmake to get a list of options to con
 ccmake ..
 
 # choose the options
-# first press [c] - configure
+# first press [c] - configure (unil you see [g])
 # then press [g] - generate
 ```

 |Example cmake options|Comment|
 |---|---|
 | -DSLS_USE_PYTHON=ON            | Python                                 |   
-| -DPython_FIND_VIRTUALENV=ONLY  | Python from only the conda environment |
-| -DZeroMQ_HINT=/usr/lib64       | Use system zmq instead                 |    
+| -DPython_FIND_VIRTUALENV=ONLY  | Python from only the conda env         | 
 | -DSLS_USE_GUI=ON               | GUI                                    |
+| -DSLS_USE_HDF5=ON              | HDF5                                   |
+| -DSLS_USE_SIMULATOR=ON         | Simulator                              |

+> **Note:** For v7.x.x of slsDetectorPackage and older, refer [zeromq notes for cmake option to hint library location](#Pybind-and-Zeromq).

-###### Build using in-built cmk.sh script
+### Build using in-built cmk.sh script

 ```
 The binaries are generated in slsDetectorPackage/build/bin directory.

-Usage: ./cmk.sh [-b] [-c] [-d <HDF5 directory>] [e] [g] [-h] [i] [-j <Number of threads>] 
-[-k <CMake command>] [-l <Install directory>] [m] [n] [-p] [-q <Zmq hint directory>] 
-[r] [s] [t] [u] [z]  
+Usage: $0 [-b] [-c] [-d <HDF5 directory>] [-e] [-g] [-h] [-i]
+[-j <Number of threads>] [-k <CMake command>] [-l <Install directory>]
+[-m] [-n] [-p] [-r] [-s] [-t] [-u] [-z]
 -[no option]: only make
 -b: Builds/Rebuilds CMake files normal mode
 -c: Clean
@ -128,7 +121,6 @@ Usage: ./cmk.sh [-b] [-c] [-d <HDF5 directory>] [e] [g] [-h] [i] [-j <Number of
 -m: Manuals
 -n: Manuals without compiling doxygen (only rst)
 -p: Builds/Rebuilds Python API
-q: Zmq hint directory
 -r: Build/Rebuilds only receiver
 -s: Simulator
 -t: Build/Rebuilds only text client
@ -145,11 +137,14 @@ Usage: ./cmk.sh [-b] [-c] [-d <HDF5 directory>] [e] [g] [-h] [i] [-j <Number of
 # new build, python and compile in parallel:
 ./cmk.sh -cbpj5

-#To use the system zmq (/usr/lib64) instead
-./cmk.sh -cbj5 -q /usr/lib64
+#For rebuilding only certain sections
+./cmk.sh -tg #only text client and gui
+./cmk.sh -r #only receiver
 ```

-###### Build on old distributions
+> **Note:** For v7.x.x of slsDetectorPackage and older, refer [zeromq notes for cmk script option to hint library location](#Pybind-and-Zeromq).
+
+### Build on old distributions

 If your linux distribution doesn't come with a C++11 compiler (gcc>4.8) then 
 it's possible to install a newer gcc using conda and build the slsDetectorPackage
@ -166,7 +161,10 @@ cmake ../slsDetectorPackage -DCMAKE_PREFIX_PATH=$CONDA_PREFIX
 make -j12
 ```

-###### Build slsDetectorGui (Qt5)
+> **Note:** For v7.x.x of slsDetectorPackage and older, refer [zeromq notes for dependencies for conda](#Pybind-and-Zeromq).
+
+
+### Build slsDetectorGui (Qt5)

 1. Using pre-built binary on conda
 ```
@ -180,7 +178,14 @@ yum install qt5-qtbase-devel.x86_64
 yum install qt5-qtsvg-devel.x86_64 
 ```

-3. Using conda
+3. Using system installation on RHEL8
+```
+yum install qt5-qtbase-devel.x86_64
+yum install qt5-qtsvg-devel.x86_64 
+yum install expat-devel.x86_64
+```
+
+4. Using conda
 ```
 #Add channels for dependencies and our library
 conda config --add channels conda-forge
@ -208,13 +213,15 @@ cd slsDetectorPackage
 ./cmk.sh -cbgj9
 ```

-###### Build documentation from package
+> **Note:** For v7.x.x of slsDetectorPackage and older, refer [zeromq notes for dependencies for conda](#Pybind-and-Zeromq).
+
+### Build documentation from package
 The documentation for the slsDetectorPackage is build using a combination 
 of Doxygen, Sphinx and Breathe. The easiest way to install the dependencies
 is to use conda 

 ```
-conda create -n myenv python sphinx_rtd_theme breathe
+conda create -n myenv python=3.12 sphinx sphinx_rtd_theme breathe doxygen numpy
 ```

 ```
@ -228,6 +235,47 @@ make rst # rst only, saves time in case the API did not change
 ```


+
+## Pybind and Zeromq
+
+### Pybind11 for Python
+**v8.0.0+**:
+pybind11 is built
+* by default from tar file in repo (libs/pybind/v2.1x.0.tar.gz)
+* or use advanced option SLS_FETCH_PYBIND11_FROM_GITHUB [link].
+   * v9.0.0+: pybind11 (v2.13.6)
+   * v8.x.x : pybind11 (v2.11.0)
+
+**v7.x.x**:
+pybind11 packaged into ‘libs/pybind’. No longer a submodule. No need for “recursive” or “submodule update”.
+
+**Older versions**:
+pybind11 is a submodule. Must be cloned using “recursive” and updated when switching between versions using the following commands.
+
+```
+# Note: Only for v6.x.x versions and older
+
+# clone using recursive to get pybind11 submodule
+git clone --recursive https://github.com/slsdetectorgroup/slsDetectorPackage.git
+
+# update submodule when switching between releases
+cd slsDetectorPackage
+git submodule update --init
+```
+
+### Zeromq
+**v8.0.0+**:
+zeromq (v4.3.4) is built
+* by default from tar file in repo (libs/libzmq/libzmq-4.3.4.tar.gz)
+* or use advanced option SLS_FETCH_ZMQ_FROM_GITHUB [link].
+
+**v7.x.x and older**:
+zeromq-devel must be installed and one can hint its location using
+* cmake option:’-DZeroMQ_HINT=/usr/lib64’ or
+* option ‘-q’ in cmk.sh script: : ./cmk.sh -cbj5 -q /usr/lib64
+* ‘zeromq’ dependency added when installing using conda
+
+
 ## Support
    dhanya.thattil@psi.ch
    erik.frojdh@psi.ch
--- a/conda-recipe/build_pylib.sh
+++ b/conda-recipe/build_pylib.sh
@ -8,7 +8,4 @@ cd python
 # copy VERSION into slsdet for installation
 cp ../VERSION slsdet/VERSION

-# to be used to get project version in meta.yaml
-export SLS_DET_VERSION=$(cat python/slsdet/VERSION)
-
 ${PYTHON} setup.py install 
--- a/conda-recipe/meta.yaml
+++ b/conda-recipe/meta.yaml
@ -1,10 +1,6 @@
-
-{% set version = environ.get('SLS_DET_VERSION', '0.0.0') %}
-
-
 package:
  name: sls_detector_software
-  version: "{{ version }}"
+  version: {{ environ.get('GIT_DESCRIBE_TAG', '') }}


 source:
@ -79,12 +75,13 @@ outputs:
        - {{compiler('cxx')}}
        - {{ pin_subpackage('slsdetlib', exact=True) }}
        - setuptools
-        - pybind11=2.11
+        - pybind11=2.13

      host:
        - python
        - {{ pin_subpackage('slsdetlib', exact=True) }}
-        - pybind11=2.11
+        - setuptools
+        - pybind11=2.13


      run:
--- a/docs/CMakeLists.txt
+++ b/docs/CMakeLists.txt
@ -64,7 +64,6 @@ set(SPHINX_SOURCE_FILES
  src/binaryfileformat.rst
  src/hdf5fileformat.rst
  src/zmqjsonheaderformat.rst
-  src/ctbframeformat.rst
 )

 foreach(filename ${SPHINX_SOURCE_FILES})
--- a/docs/src/ctbframeformat.rst
+++ b/docs/src/ctbframeformat.rst
@ -1,81 +0,0 @@
-Chip Test Board Frame Format
-================================
-
-Contents of a frame
--------------------
-
-Each frame consists of 3 types of data in the following order:
-
-    .. code-block:: text
-
-        # only data from enabled modes are included
-        [ Analog Data ] 
-        [ Digital Data ]
-        [ Transceiver Data ]
-
-
-Each Data type is further divided into:
-
-    .. code-block:: text
-
-        [ Sample 0 for all enabled Channels ] 
-        [ Sample 1 for all enabled Channels ] 
-        ... 
-        [ Sample N for all enabled Channels ]
-
-
-Digital data
-------------------
-
-The chip test board sends out all digital data. 
-
-Only the receiver can filter them using the command `rx_dbitlist <commandline.html#term-rx_dbitlist-all-or-i0-i1-i2-...>`_. 
-
-    .. code-block:: text
-
-        # filtered and reordered digital data from receiver
-        # Any signal that is not a byte is filled with 0's to make up a byte
-
-        [all samples of list signal 0] 
-        [all samples of list signal 1] 
-        ... 
-        [all samples of list signal N]
-
-
-
-
-Parameters of readout modes
---------------------------------
-
-.. list-table:: 
-   :widths: 25 40 20 30
-   :header-rows: 1
-
-   * - Readout mode
-     - Enable Channels
-     - Number of samples
-     - Number of bytes
-   * - Analog
-     - 1G:  `adcenable <commandline.htmlterm-adcenable-bitmask>`_ 
-            
-       10G: `adcenable10g <commandline.htmlterm-adcenable10g-bitmask>`_  
-     - `asamples <commandline.html#term-asamples-n_samples>`_
-     - 2 bytes per channel,
-           
-       max 32 channels
-   * - Digital
-     - `rx_dbitlist <commandline.html#term-rx_dbitlist-all-or-i0-i1-i2-...>`_  
-              
-       [filtered only by receiver, module sends out all digital data]
-     - `dsamples <commandline.html#term-dsamples-n_value>`_
-     - 1 bit per signal,  
-          
-       max 64 signals
-   * - Transceiver
-     - `transceiverenable <commandline.html#term-transceiverenable-bitmask>`_
-     - `tsamples <commandline.html#term-tsamples-n_value>`_
-     - 8 bytes per channel,  
-         
-       max 4 channels
-
-
--- a/docs/src/dependencies.rst
+++ b/docs/src/dependencies.rst
@ -20,8 +20,8 @@ the shared libraries these are needed:
 Python bindings
 -----------------------

- * Python > 3.6
- * pybind11 2.11.0 (packaged in libs)
+ * Python >= 3.8
+ * pybind11 2.13.6 (packaged in libs)

 .. note ::  

--- a/docs/src/index.rst
+++ b/docs/src/index.rst
@ -12,7 +12,7 @@ Welcome to slsDetectorPackage's documentation!
    For further documentation, visit the official page: https://www.psi.ch/en/detectors/documentation

 .. toctree::
-    :maxdepth: 1
+    :maxdepth: 3
    :caption: Installation:

    installation
@ -88,7 +88,6 @@ Welcome to slsDetectorPackage's documentation!

    fileformat
    slsreceiverheaderformat
-    ctbframeformat
    masterfileattributes
    binaryfileformat
    hdf5fileformat
--- a/docs/src/installation.rst
+++ b/docs/src/installation.rst
@ -1,8 +1,3 @@
-.. warning ::
-    
-    Before building from source make sure that you have the 
-    :doc:`dependencies <../dependencies>` installed. If installing using conda, conda will 
-    manage the dependencies. Avoid also installing packages with pip. 


 .. _Installation:
@ -11,8 +6,18 @@
 Installation
 ===============

+One can either install pre-built binaries using conda or build from source.
+
+.. warning ::
+    
+    Before building from source make sure that you have the 
+    :doc:`dependencies <../dependencies>` installed. If installing using conda, conda will 
+    manage the dependencies. Avoid also installing packages with pip. 
+   
+
+
 Install binaries using conda
-------------------------------
+----------------------------------

 Conda is not only useful to manage python environments but can also
 be used as a user space package manager. Dates in the tag (for eg. 2020.07.23.dev0) 
@ -55,7 +60,7 @@ We have three different packages available:


 Build from source
-------------------
+----------------------

 1. Download Source Code from github
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@ -75,8 +80,10 @@ Build from source
 2. Build from Source
 ^^^^^^^^^^^^^^^^^^^^^^^^^^

+One can either build using cmake or use the in-built cmk.sh script.
+
 Build using CMake
-^^^^^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

 .. code-block:: bash

@ -103,7 +110,7 @@ Instead of the cmake command, one can use ccmake to get a list of options to con
    ccmake ..
 
    # choose the options
-    # first press [c] - configure (maybe multiple times till you see [g])
+    # first press [c] - configure (until you see [g])
    # then press [g] - generate


@ -123,7 +130,7 @@ Example cmake options               Comment


 Build using in-built cmk.sh script
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^


 .. code-block:: bash
@ -173,7 +180,7 @@ Build using in-built cmk.sh script


 Build on old distributions
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

 If your linux distribution doesn't come with a C++11 compiler (gcc>4.8) then 
 it's possible to install a newer gcc using conda and build the slsDetectorPackage
@ -198,7 +205,7 @@ using this compiler


 Build slsDetectorGui (Qt5)
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

 1. Using pre-built binary on conda

@ -259,7 +266,7 @@ Build slsDetectorGui (Qt5)


 Build this documentation
-^^^^^^^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

 The documentation for the slsDetectorPackage is build using a combination 
 of Doxygen, Sphinx and Breathe. The easiest way to install the dependencies
@ -282,16 +289,18 @@ is to use conda


 Pybind and Zeromq
-^^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^

 .. _pybind for different slsDetectorPackage versions:


-| **Pybind for Python**
+| **Pybind11 for Python**
 | v8.0.0+: 
-|   pybind11 (v2.11.0) is built 
-|   * by default from tar file in repo (libs/pybind/v2.11.0.tar.gz) 
+|   pybind11 is built
+|   * by default from tar file in repo (libs/pybind/v2.1x.0.tar.gz) 
 |   * or use advanced option SLS_FETCH_PYBIND11_FROM_GITHUB [`link <https://github.com/pybind/pybind11>`__].
+|      * v9.0.0+: pybind11 (v2.13.6)
+|      * v8.x.x : pybind11 (v2.11.0)
 |
 | v7.x.x:
 |   pybind11 packaged into 'libs/pybind'. No longer a submodule. No need for "recursive" or "submodule update".
--- a/docs/src/pygettingstarted.rst
+++ b/docs/src/pygettingstarted.rst
@ -6,7 +6,7 @@ Getting Started
 Which Python?  
 --------------------

-We require at least Python 3.6 and strongly recommended that you don't use the system
+We require at least Python 3.8 and strongly recommended that you don't use the system
 Python installation. The examples in this documentation uses `conda
 <https://docs.conda.io/en/latest/miniconda.html>`_ since it provides good support
 also for non Python packages but there are also other alternatives like, pyenv. 
--- a/docs/src/troubleshooting.rst
+++ b/docs/src/troubleshooting.rst
@ -394,6 +394,14 @@ Missing first frame or next frame after a delay
 Connect the data link from the Module directly to receiver pc or to a private network.


+Mythen3
+--------
+
+Detector status is waiting even in auto timing mode
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+Check if the control board or the flat band cable is connected properly. If not, connect them properly and try again.
+
+
 Jungfrau
 ---------

--- a/libs/pybind11/v2.11.0.tar.gz
+++ b/libs/pybind11/v2.11.0.tar.gz
--- a/libs/pybind11/v2.13.6.tar.gz
+++ b/libs/pybind11/v2.13.6.tar.gz
--- a/psi-pmodules/DetectorSoftware/slsDetectorPackage/files/variants
+++ b/psi-pmodules/DetectorSoftware/slsDetectorPackage/files/variants
@ -11,4 +11,6 @@ slsDetectorPackage/8.0.1_rh7 stable cmake/3.15.5 Qt/5.12.10
 slsDetectorPackage/8.0.1_rh8 stable cmake/3.15.5 Qt/5.12.10
 slsDetectorPackage/8.0.2_rh7 stable cmake/3.15.5 Qt/5.12.10
 slsDetectorPackage/8.0.2_rh8 stable cmake/3.15.5 Qt/5.12.10
+slsDetectorPackage/9.0.0_rh8 stable cmake/3.15.5 Qt/5.12.10
+

--- a/python/CMakeLists.txt
+++ b/python/CMakeLists.txt
@ -64,7 +64,7 @@ configure_file( scripts/test_virtual.py
    ${CMAKE_BINARY_DIR}/test_virtual.py 
 )

-configure_file( ${CMAKE_SOURCE_DIR}/VERSION  
+configure_file( ${CMAKE_CURRENT_SOURCE_DIR}/../VERSION  
    ${CMAKE_BINARY_DIR}/bin/slsdet/VERSION
 )

--- a/slsDetectorSoftware/generator/autocomplete/bash_autocomplete.sh
+++ b/slsDetectorSoftware/generator/autocomplete/bash_autocomplete.sh
@ -1505,6 +1505,7 @@ fi
 if [[ ${IS_GET} -eq 0 ]]; then
 if [[ "${cword}" == "2" ]]; then
 FCN_RETURN=""
+IS_PATH=1
 fi
 fi
 return 0
@ -1514,6 +1515,7 @@ FCN_RETURN=""
 if [[ ${IS_GET} -eq 1 ]]; then
 if [[ "${cword}" == "2" ]]; then
 FCN_RETURN=""
+IS_PATH=1
 fi
 fi
 return 0
--- a/slsDetectorSoftware/generator/autocomplete/zsh_autocomplete.sh
+++ b/slsDetectorSoftware/generator/autocomplete/zsh_autocomplete.sh
@ -1429,6 +1429,7 @@ fi
 if [[ ${IS_GET} -eq 0 ]]; then
 if [[ "${cword}" == "2" ]]; then
 FCN_RETURN=""
+IS_PATH=1
 fi
 fi
 return 0
@ -1438,6 +1439,7 @@ FCN_RETURN=""
 if [[ ${IS_GET} -eq 1 ]]; then
 if [[ "${cword}" == "2" ]]; then
 FCN_RETURN=""
+IS_PATH=1
 fi
 fi
 return 0
--- a/slsDetectorSoftware/generator/commands.yaml
+++ b/slsDetectorSoftware/generator/commands.yaml
@ -3884,8 +3884,8 @@ patternX:
      require_det_id: true
      function: setPattern
      input: [ 'args[0]' ]
+      arg_types: [special::path]
      input_types: [ std::string ]
-      cast_input: [ false ]
      output: [ 'args.front()' ]

 patword:
--- a/slsDetectorSoftware/generator/extended_commands.yaml
+++ b/slsDetectorSoftware/generator/extended_commands.yaml
@ -6539,7 +6539,7 @@ patternX:
    PUT:
      args:
      - arg_types:
-        - std::string
+        - special::path
        argc: 1
        cast_input:
        - false
--- a/slsDetectorSoftware/tests/Caller/test-Caller.cpp
+++ b/slsDetectorSoftware/tests/Caller/test-Caller.cpp
@ -3319,6 +3319,12 @@ TEST_CASE("reg", "[.cmdcall]") {
    auto det_type = det.getDetectorType().squash();
    if (det_type != defs::EIGER) {
        uint32_t addr = 0x64;
+        if (det_type == defs::MYTHEN3) {
+            addr = 0x80;
+        }
+        if (det_type == defs::GOTTHARD2) {
+            addr = 0x20;
+        }
        std::string saddr = ToStringHex(addr);
        auto prev_val = det.readRegister(addr);
        {
@ -3369,6 +3375,12 @@ TEST_CASE("setbit", "[.cmdcall]") {
    auto det_type = det.getDetectorType().squash();
    if (det_type != defs::EIGER) {
        uint32_t addr = 0x64;
+        if (det_type == defs::MYTHEN3) {
+            addr = 0x80;
+        }
+        if (det_type == defs::GOTTHARD2) {
+            addr = 0x20;
+        }
        std::string saddr = ToStringHex(addr);
        auto prev_val = det.readRegister(addr);
        {
@ -3393,6 +3405,12 @@ TEST_CASE("clearbit", "[.cmdcall]") {
    auto det_type = det.getDetectorType().squash();
    if (det_type != defs::EIGER) {
        uint32_t addr = 0x64;
+        if (det_type == defs::MYTHEN3) {
+            addr = 0x80;
+        }
+        if (det_type == defs::GOTTHARD2) {
+            addr = 0x20;
+        }
        std::string saddr = ToStringHex(addr);
        auto prev_val = det.readRegister(addr);
        {
@ -3417,6 +3435,12 @@ TEST_CASE("getbit", "[.cmdcall]") {
    auto det_type = det.getDetectorType().squash();
    if (det_type != defs::EIGER) {
        uint32_t addr = 0x64;
+        if (det_type == defs::MYTHEN3) {
+            addr = 0x80;
+        }
+        if (det_type == defs::GOTTHARD2) {
+            addr = 0x20;
+        }
        std::string saddr = ToStringHex(addr);
        auto prev_val = det.readRegister(addr);
        {
--- a/slsSupportLib/include/sls/versionAPI.h
+++ b/slsSupportLib/include/sls/versionAPI.h
@ -1,8 +1,6 @@
 // SPDX-License-Identifier: LGPL-3.0-or-other
 // Copyright (C) 2021 Contributors to the SLS Detector Package
 /** API versions */
-#define APIRECEIVER  "developer 0x241014"
-#define APILIB       "developer 0x241021"
 #define APICTB       "developer 0x241107"
 #define APIGOTTHARD  "developer 0x241107"
 #define APIGOTTHARD2 "developer 0x241107"
@ -10,4 +8,6 @@
 #define APIXILINXCTB "developer 0x241107"
 #define APIEIGER     "developer 0x241107"
 #define APIJUNGFRAU  "developer 0x241120"
-#define APIMYTHEN3 "developer 0x241121"
+#define APIMYTHEN3   "developer 0x241121"
+#define APILIB       "developer 0x241122"
+#define APIRECEIVER  "developer 0x241122"