detectors/slsDetectorPackage
25
0
Fork 0
mirror of https://github.com/slsdetectorgroup/slsDetectorPackage.git synced 2025-06-23 18:17:59 +02:00
Code Issues Actions Packages Releases Activity

Merge pull request #125 from slsdetectorgroup/eiger

Browse Source 
Eiger
This commit is contained in:
Dhanya Thattil
2020-08-03 15:04:25 +02:00
committed by GitHub
parent 6a084e99b4 57c3cb0849
commit 540a203139
48 changed files with 856 additions and 612 deletions
Download Patch File Download Diff File Expand all files Collapse all files

18
manual/manual-client/Eiger_short.tex
View File

@ -196,7 +196,7 @@ sls_detector_put 0-parameters setup.det
\end{verbatim}
Note that the parameter file for any realease before 4.1.1 has not the possibility to understand parameters to be set differently for different half modules, i.e. {\tt{0:txndelay\_left xxxxx},\tt{1:txndelay\_left yyyyy}}.
In the case of \E, the proper bias voltage of the sensor has to be setup, i.e. the {\tt{setup.det}} file needs to contain the line {\tt{vhighvoltage 150}}. Other detector functionality, which are rarely changed can be setup here.
In the case of \E, the proper bias voltage of the sensor has to be setup, i.e. the {\tt{setup.det}} file needs to contain the line {\tt{highvoltage 150}}. Other detector functionality, which are rarely changed can be setup here.
Other important settings that are configured in the {\tt{setup.det}} file are:
\begin{itemize}
\item {\tt{tengiga 0/1}}, which sets whether the detector is enabled to send data through the 1~or the 10~Gb Ethernet.
@ -1174,10 +1174,10 @@ In 500k--2M pixel systems there is a hardware temperature safety switch, which w
The HV can also be set and read through the software:
\begin{verbatim}
./sls_detector_put vhighvoltage 150
./sls_detector_get vhighvoltage
./sls_detector_put highvoltage 150
./sls_detector_get highvoltage
\end{verbatim}
Note that the get {\tt{vhighvoltage}} would return the measured HV from the master module only. If getting the vhighvoltage for individual halfmodules, only the master will have a value different from -999.
Note that the get {\tt{highvoltage}} would return the measured HV from the master module only. If getting the highvoltage for individual halfmodules, only the master will have a value different from -999.
\appendix
@ -1454,7 +1454,7 @@ Environment variable SLSDETNAME can be set for using 2 different detectors from
\subsection{Measure the HV}
For every system:
\begin{itemize}
\item Software-wise measure it (now the software returns the measured value), with {\tt{sls\_detector\_get vhighvoltage}}. The returned value is the HV (for proper Eiger setting is approximately 150~V) if it is correctly set. If two master modules are presents (multi systems), the average is returned (still to be tested). If one asks for the individual $n$ half module bias voltage through {\tt{sls\_detector\_get n:vhighvoltage}}, if the $n$ module is a master, the actual voltage will be returned. If it is a slave, -999 will be returned.
\item Software-wise measure it (now the software returns the measured value), with {\tt{sls\_detector\_get highvoltage}}. The returned value is the HV (for proper Eiger setting is approximately 150~V) if it is correctly set. If two master modules are presents (multi systems), the average is returned (still to be tested). If one asks for the individual $n$ half module bias voltage through {\tt{sls\_detector\_get n:highvoltage}}, if the $n$ module is a master, the actual voltage will be returned. If it is a slave, -999 will be returned.
\item Hardware-wise (opening the detector) measure value of HV on C14 on the power distribution board. Check also that the small HV connector cable is really connected.
\end{itemize}
@ -1505,7 +1505,7 @@ Scroll up in the terminal till you find:\\
There is also an easier way, that is that only the master module will return the real value of the HV. If you have more than 1 detector system, then you will have more than 1 physical master, as the HV needs to be applied to all the systems.
\begin{verbatim}
for i in $(seq 0 36); do sls_detector_put $i:vhighvoltage; done
for i in $(seq 0 36); do sls_detector_put $i:highvoltage; done
\end{verbatim}
Only the master will return to you a sensible number (150 normally). the others will return -999.
@ -1666,10 +1666,10 @@ ratecorr number
where {\tt{number}} is a string that should be interpreted as a float in s. 0.000000 means correction off. Values above zero are the value of $\tau$ in ns.
\item \begin{verbatim}
sls_detector_get vhighvoltage
vhighvoltage number
sls_detector_get highvoltage
highvoltage number
\end{verbatim}
where {\tt{number}} is a string that should be interpreted as an int and for proper Eiger setting is approximately 150~V if it is correctly set. If two master modules are presents (multi systems), the average is returned (still to be tested). If one asks for the individual $n$ half module bias voltage through {\tt{sls\_detector\_get n:vhighvoltage}}, if the $n$ module is a master, the actual voltage will be returned. If it is a slave, -999 will be returned.
where {\tt{number}} is a string that should be interpreted as an int and for proper Eiger setting is approximately 150~V if it is correctly set. If two master modules are presents (multi systems), the average is returned (still to be tested). If one asks for the individual $n$ half module bias voltage through {\tt{sls\_detector\_get n:highvoltage}}, if the $n$ module is a master, the actual voltage will be returned. If it is a slave, -999 will be returned.
\item \begin{verbatim}
sls_detector_get busy

2
manual/manual-client/commands.txt
View File

@ -142,7 +142,7 @@
"vpreamp"; // sets/get vpreamp value (advanced! Mythen)
"vshaper1"; // sets/get vshaper1 value (advanced! Mythen)
"vshaper2"; // sets/get vshaper2 value (advanced! Mythen)
"vhighvoltage"; // sets/get vhighvoltage value (advanced! Chiptest board and Eiger)
"highvoltage"; // sets/get highvoltage value (advanced! Chiptest board and Eiger)
"vapower"; // sets/get vapower value (advanced! Chiptest board)
"vddpower"; // sets/get vddpower value (advanced! Chiptest board)
"vshpower"; // sets/get vshpower value (advanced! Chiptest board)

6
manual/manual-client/slsDetectorClientHowTo.tex
View File

@ -335,7 +335,7 @@ Advanced settings changing the analog or digital performance of the acquisition.
\item[vpreamp n] Sets the DAC value of the preamp feedback to n.
\item[vshaper1 n] Sets the DAC value of the shaper1 feedback to n.
\item[vshaper2 n] Sets the DAC value of the shaper2 feedback to n.
\item[vhighvoltage n] Sets the DAC value of the high voltage to n (in V).
\item[highvoltage n] Sets the DAC value of the high voltage to n (in V).
\item[vapower n] CHIPTEST BOARD ONLY - Sets the DAC value of the analog voltage to n.
\item[vddpower n] CHIPTEST BOARD ONLY - Sets the DAC value of the analog voltage to n.
\item[vshpower n] CHIPTEST BOARD ONLY - Sets the comparator power supply in dac units (0-1024).
@ -648,7 +648,7 @@ Advanced settings changing the analog or digital performance of the acquisition.
\item[vpreamp] Returns the DAC value of the preamp feedback to n.
\item[vshaper1] Returns the DAC value of the shaper1 feedback to n.
\item[vshaper2] Returns the DAC value of the shaper2 feedback to n.
\item[vhighvoltage] Returns the DAC value of the high voltage to n.
\item[highvoltage] Returns the DAC value of the high voltage to n.
\item[vapower] CHIPTEST BOARD ONLY - Returns the DAC value of the analog voltage to n.
\item[vddpower] CHIPTEST BOARD ONLY - Returns the DAC value of the analog voltage to n.
\item[vshpower] CHIPTEST BOARD ONLY - Returns the comparator power supply in dac units (0-1024).
@ -714,7 +714,7 @@ One can configure all the detector settings in a parameter file {\tt{setup.det}}
sls_detector_put parameters setup.det
\end{verbatim}
In the case of \E, the parameter file ({\tt{setup.det}} needs to setup the proper bias voltage of the sensor, i.e. needs to contain the line {\tt{vhighvoltage 150}}.
In the case of \E, the parameter file ({\tt{setup.det}} needs to setup the proper bias voltage of the sensor, i.e. needs to contain the line {\tt{highvoltage 150}}.
\subsection{Standard acquisition}

4
manual/manual-main/slsDetectorClientHowTo.tex
View File

@ -322,7 +322,7 @@ Advanced settings changing the analog or digital performance of the acquisition.
\item[vpreamp n] Sets the DAC value of the preamp feedback to n.
\item[vshaper1 n] Sets the DAC value of the shaper1 feedback to n.
\item[vshaper2 n] Sets the DAC value of the shaper2 feedback to n.
\item[vhighvoltage n] CHIPTEST BOARD ONLY - Sets the DAC value of the high voltage to n.
\item[highvoltage n] CHIPTEST BOARD ONLY - Sets the DAC value of the high voltage to n.
\item[vapower n] CHIPTEST BOARD ONLY - Sets the DAC value of the analog voltage to n.
\item[vddpower n] CHIPTEST BOARD ONLY - Sets the DAC value of the analog voltage to n.
\item[vshpower n] CHIPTEST BOARD ONLY - Sets the comparator power supply in dac units (0-1024).
@ -594,7 +594,7 @@ Advanced settings changing the analog or digital performance of the acquisition.
\item[vpreamp] Returns the DAC value of the preamp feedback to n.
\item[vshaper1] Returns the DAC value of the shaper1 feedback to n.
\item[vshaper2] Returns the DAC value of the shaper2 feedback to n.
\item[vhighvoltage] CHIPTEST BOARD ONLY - Returns the DAC value of the high voltage to n.
\item[highvoltage] CHIPTEST BOARD ONLY - Returns the DAC value of the high voltage to n.
\item[vapower] CHIPTEST BOARD ONLY - Returns the DAC value of the analog voltage to n.
\item[vddpower] CHIPTEST BOARD ONLY - Returns the DAC value of the analog voltage to n.
\item[vshpower] CHIPTEST BOARD ONLY - Returns the comparator power supply in dac units (0-1024).