detectors/slsDetectorPackage
25
0
Fork 0
mirror of https://github.com/slsdetectorgroup/slsDetectorPackage.git synced 2025-06-06 10:00:40 +02:00
Code Issues Actions Packages Releases Activity

release notes

Browse Source
This commit is contained in:
maliakal_d 2023-11-12 15:39:58 +01:00
parent 5ab64efe3e
commit 4b414bfddb
1 changed files with 16 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

23
RELEASE.txt
View File

@ -1,4 +1,4 @@
SLS Detector Package Major Release 7.0.3 released on 10.11.2023
SLS Detector Package Major Release 7.0.3 released on 13.11.2023
===============================================================
This document describes the differences between v7.0.3 and v7.0.2
@ -22,25 +22,28 @@ This document describes the differences between v7.0.3 and v7.0.2
Firmware
--------
* [Eiger] Blocking trigger on quad
Previously, blocking software trigger on a quad was not blocking. Fixed
with firmware v32.
Client
------
* Limit port number max to 65535
Previously, one could set the port numbers (TCP, UDP, ZMQ) to values
higher than 65535 and also to 0. However, it was truncated to 16 bit
in the background, but not relayed to the user.
Now, it will throw if it is 0 or greater than 65535 (16 bit).
* Stopping acqusition for a single or subset of modules
The Detector API previously stopped all modules.
Now, it takes into account which modules the user wanted to stop.
* [Jungfrau] Stop in sync mode
When stopping acquisition in sync mode, only the master module sometimes
returns 'Idle' state instead of 'Stopped'. The software threw an
@ -48,6 +51,7 @@ This document describes the differences between v7.0.3 and v7.0.2
Now, it does not throw and a fix will be added to the next firmware
release for the different states (with SW release: v8.0.0).
* [Eiger] Incorrect error message in Stop
When stopping acquisition, if a half module were to give an error in a
rare case while the others succeeded, this would result in an re-attempt
@ -57,21 +61,22 @@ This document describes the differences between v7.0.3 and v7.0.2
immediately.
Receiver
--------
* Limit TCP port number (command line) to max of 65535
Refer issue under 'Client'.
Detector Simulator
------------------
* Limit TCP port number (command line) to max of 65535
Refer issue under 'Client'.
* Some commands such as 'readnrows' would complain that it cannot be set
because the detector is not idle, but was setting it anyway. Fixed.
@ -79,16 +84,19 @@ This document describes the differences between v7.0.3 and v7.0.2
Gui/ Client Callback
--------------------
* [Jungfrau] Gui: corrected color map of gain plot
Previously, color on the gain plot did not update after the first image,
unless there were x/y min/max changes or window resizing. Fixed.
* [Jungfrau] Acquisition finished callback error status in sync mode
When stopping acquisition in multi module Jungfrau sync mode,
different status (master 'idle' and slaves 'stopped' in
firmware 2.4.1 or 1.4.1) show as 'error' in acquisition finished call
back (mainly used for gui). This is fixed.
* [Jungfrau] Gui: Next frame number shown as 0 for inconsistency
When stopping an acquisition in a multi module Jungfrau, the next
frame numbers might be different, for which the Gui shows an error message
@ -97,13 +105,14 @@ This document describes the differences between v7.0.3 and v7.0.2
that 0 is an invalid input.
Data Processing
---------------
* [Moench] Segmentation fault with moench03RawDataPrcess
Previously, it crashed when nframes > 0. Fixed.
* [Moench] Moench interpolation issues fixed.
@ -142,8 +151,8 @@ This document describes the differences between v7.0.3 and v7.0.2
Eiger 02.10.2023 (v32) (updated in 7.0.3)
Jungfrau 16.05.2023 (v1.4.1, HW v1.0) (updated in 7.0.3)
15.05.2023 (v2.4.1, HW v2.0) (updated in 7.0.3)
Jungfrau 16.05.2023 (v1.4.1, HW v1.0) (updated in 7.0.2)
15.05.2023 (v2.4.1, HW v2.0) (updated in 7.0.2)
Mythen3 24.01.2023 (v1.4) (updated in 7.0.0)