mirror of
https://github.com/slsdetectorgroup/slsDetectorPackage.git
synced 2026-01-16 22:58:02 +01:00
Dev/xilinx acq (#901)
* period and exptime(patternwaittime level 0) * added new regsieterdefs and updated api version and fixedpattern reg * autogenerate commands * formatting * minor * wip resetflow, readout mode, transceiver mask, transceiver enable * acquisition, but streaming done bit and busy (exposing + read chip to fifo) not known yet from fw * programming fpga and device tree done * most configuration done, need to connect configuretransceiver to client * stuck at resetting transciever timed out * minor * fixed virtual, added chip busyto fifo, streaming busy, set/getnext framenumber * configuretransceiver from client, added help in client * make formatt and command generation * tests for xilinx ctb works * command generation * dacs added and tested, power not done * power added * added temp_fpga * binaries in * ctrlreg is 0 to enable chip=fixed, high dac val = min val= fixed, power regulators in weird order=fixed, device tree could be loaded with dacs before adcs=fixed * start works * virtual server sends * receiver works * tests * python function and enum generation, commands generatorn and autocomplete, formatting, tests * tests fail at start(transceiver not aligned) * tests passed * all binaries compiled * eiger binary in * added --nomodule cehck for xilinx
This commit is contained in:
GitHub
@@ -80,7 +80,7 @@ _sd() {
|
||||
local IS_PATH=0
|
||||
|
||||
|
||||
local SLS_COMMANDS=" acquire activate adcclk adcenable adcenable10g adcindex adcinvert adclist adcname adcphase adcpipeline adcreg adcvpp apulse asamples autocompdisable badchannels blockingtrigger burstmode burstperiod bursts burstsl bustest cdsgain chipversion clearbit clearbusy clearroi clientversion clkdiv clkfreq clkphase column compdisabletime confadc config counters currentsource dac dacindex daclist dacname dacvalues datastream dbitclk dbitphase dbitpipeline defaultdac defaultpattern delay delayl detectorserverversion detsize diodelay dpulse dr drlist dsamples execcommand exptime exptime1 exptime2 exptime3 exptimel extrastoragecells extsampling extsamplingsrc extsig fformat filtercells filterresistor findex firmwaretest firmwareversion fliprows flowcontrol10g fmaster fname foverwrite fpath framecounter frames framesl frametime free fwrite gaincaps gainmode gappixels gatedelay gatedelay1 gatedelay2 gatedelay3 gates getbit hardwareversion highvoltage hostname im_a im_b im_c im_d im_io imagetest initialchecks inj_ch interpolation interruptsubframe kernelversion lastclient led lock master maxadcphaseshift maxclkphaseshift maxdbitphaseshift measuredperiod measuredsubperiod moduleid nextframenumber nmod numinterfaces overflow packageversion parallel parameters partialreset patfname patioctrl patlimits patloop patloop0 patloop1 patloop2 patmask patnloop patnloop0 patnloop1 patnloop2 patsetbit patternX patternstart patwait patwait0 patwait1 patwait2 patwaittime patwaittime0 patwaittime1 patwaittime2 patword pedestalmode period periodl polarity port powerchip powerindex powerlist powername powervalues programfpga pulse pulsechip pulsenmove pumpprobe quad ratecorr readnrows readout readoutspeed readoutspeedlist rebootcontroller reg resetdacs resetfpga roi romode row runclk runtime rx_arping rx_clearroi rx_dbitlist rx_dbitoffset rx_discardpolicy rx_fifodepth rx_frameindex rx_framescaught rx_framesperfile rx_hostname rx_jsonaddheader rx_jsonpara rx_lastclient rx_lock rx_missingpackets rx_padding rx_printconfig rx_realudpsocksize rx_roi rx_silent rx_start rx_status rx_stop rx_tcpport rx_threads rx_udpsocksize rx_version rx_zmqfreq rx_zmqhwm rx_zmqip rx_zmqport rx_zmqstartfnum rx_zmqstream samples savepattern scan scanerrmsg selinterface serialnumber setbit settings settingslist settingspath signalindex signallist signalname slowadc slowadcindex slowadclist slowadcname slowadcvalues start status stop stopport storagecell_delay storagecell_start subdeadtime subexptime sync syncclk temp_10ge temp_adc temp_control temp_dcdc temp_event temp_fpga temp_fpgaext temp_fpgafl temp_fpgafr temp_slowadc temp_sodl temp_sodr temp_threshold templist tempvalues tengiga threshold thresholdnotb timing timinglist timingsource top transceiverenable trigger triggers triggersl trimbits trimen trimval tsamples txdelay txdelay_frame txdelay_left txdelay_right type udp_cleardst udp_dstip udp_dstip2 udp_dstlist udp_dstmac udp_dstmac2 udp_dstport udp_dstport2 udp_firstdst udp_numdst udp_reconfigure udp_srcip udp_srcip2 udp_srcmac udp_srcmac2 udp_validate update updatedetectorserver updatekernel updatemode user v_a v_b v_c v_chip v_d v_io v_limit vchip_comp_adc vchip_comp_fe vchip_cs vchip_opa_1st vchip_opa_fd vchip_ref_comp_fe versions veto vetoalg vetofile vetophoton vetoref vetostream virtual vm_a vm_b vm_c vm_d vm_io zmqhwm zmqip zmqport "
|
||||
local SLS_COMMANDS=" acquire activate adcclk adcenable adcenable10g adcindex adcinvert adclist adcname adcphase adcpipeline adcreg adcvpp apulse asamples autocompdisable badchannels blockingtrigger burstmode burstperiod bursts burstsl bustest cdsgain chipversion clearbit clearbusy clearroi clientversion clkdiv clkfreq clkphase column compdisabletime confadc config configtransceiver counters currentsource dac dacindex daclist dacname dacvalues datastream dbitclk dbitphase dbitpipeline defaultdac defaultpattern delay delayl detectorserverversion detsize diodelay dpulse dr drlist dsamples execcommand exptime exptime1 exptime2 exptime3 exptimel extrastoragecells extsampling extsamplingsrc extsig fformat filtercells filterresistor findex firmwaretest firmwareversion fliprows flowcontrol10g fmaster fname foverwrite fpath framecounter frames framesl frametime free fwrite gaincaps gainmode gappixels gatedelay gatedelay1 gatedelay2 gatedelay3 gates getbit hardwareversion highvoltage hostname im_a im_b im_c im_d im_io imagetest initialchecks inj_ch interpolation interruptsubframe kernelversion lastclient led lock master maxadcphaseshift maxclkphaseshift maxdbitphaseshift measuredperiod measuredsubperiod moduleid nextframenumber nmod numinterfaces overflow packageversion parallel parameters partialreset patfname patioctrl patlimits patloop patloop0 patloop1 patloop2 patmask patnloop patnloop0 patnloop1 patnloop2 patsetbit patternX patternstart patwait patwait0 patwait1 patwait2 patwaittime patwaittime0 patwaittime1 patwaittime2 patword pedestalmode period periodl polarity port powerchip powerindex powerlist powername powervalues programfpga pulse pulsechip pulsenmove pumpprobe quad ratecorr readnrows readout readoutspeed readoutspeedlist rebootcontroller reg resetdacs resetfpga roi romode row runclk runtime rx_arping rx_clearroi rx_dbitlist rx_dbitoffset rx_discardpolicy rx_fifodepth rx_frameindex rx_framescaught rx_framesperfile rx_hostname rx_jsonaddheader rx_jsonpara rx_lastclient rx_lock rx_missingpackets rx_padding rx_printconfig rx_realudpsocksize rx_roi rx_silent rx_start rx_status rx_stop rx_tcpport rx_threads rx_udpsocksize rx_version rx_zmqfreq rx_zmqhwm rx_zmqip rx_zmqport rx_zmqstartfnum rx_zmqstream samples savepattern scan scanerrmsg selinterface serialnumber setbit settings settingslist settingspath signalindex signallist signalname slowadc slowadcindex slowadclist slowadcname slowadcvalues start status stop stopport storagecell_delay storagecell_start subdeadtime subexptime sync syncclk temp_10ge temp_adc temp_control temp_dcdc temp_event temp_fpga temp_fpgaext temp_fpgafl temp_fpgafr temp_slowadc temp_sodl temp_sodr temp_threshold templist tempvalues tengiga threshold thresholdnotb timing timinglist timingsource top transceiverenable trigger triggers triggersl trimbits trimen trimval tsamples txdelay txdelay_frame txdelay_left txdelay_right type udp_cleardst udp_dstip udp_dstip2 udp_dstlist udp_dstmac udp_dstmac2 udp_dstport udp_dstport2 udp_firstdst udp_numdst udp_reconfigure udp_srcip udp_srcip2 udp_srcmac udp_srcmac2 udp_validate update updatedetectorserver updatekernel updatemode user v_a v_b v_c v_chip v_d v_io v_limit vchip_comp_adc vchip_comp_fe vchip_cs vchip_opa_1st vchip_opa_fd vchip_ref_comp_fe versions veto vetoalg vetofile vetophoton vetoref vetostream virtual vm_a vm_b vm_c vm_d vm_io zmqhwm zmqip zmqport "
|
||||
__acquire() {
|
||||
FCN_RETURN=""
|
||||
return 0
|
||||
@@ -477,6 +477,16 @@ fi
|
||||
fi
|
||||
return 0
|
||||
}
|
||||
__configtransceiver() {
|
||||
FCN_RETURN=""
|
||||
if [[ ${IS_GET} -eq 1 ]]; then
|
||||
if [[ "${cword}" == "2" ]]; then
|
||||
FCN_RETURN=""
|
||||
IS_PATH=1
|
||||
fi
|
||||
fi
|
||||
return 0
|
||||
}
|
||||
__counters() {
|
||||
FCN_RETURN=""
|
||||
return 0
|
||||
|
||||
@@ -4,7 +4,7 @@
|
||||
_sd() {
|
||||
|
||||
|
||||
local SLS_COMMANDS=" acquire activate adcclk adcenable adcenable10g adcindex adcinvert adclist adcname adcphase adcpipeline adcreg adcvpp apulse asamples autocompdisable badchannels blockingtrigger burstmode burstperiod bursts burstsl bustest cdsgain chipversion clearbit clearbusy clearroi clientversion clkdiv clkfreq clkphase column compdisabletime confadc config counters currentsource dac dacindex daclist dacname dacvalues datastream dbitclk dbitphase dbitpipeline defaultdac defaultpattern delay delayl detectorserverversion detsize diodelay dpulse dr drlist dsamples execcommand exptime exptime1 exptime2 exptime3 exptimel extrastoragecells extsampling extsamplingsrc extsig fformat filtercells filterresistor findex firmwaretest firmwareversion fliprows flowcontrol10g fmaster fname foverwrite fpath framecounter frames framesl frametime free fwrite gaincaps gainmode gappixels gatedelay gatedelay1 gatedelay2 gatedelay3 gates getbit hardwareversion highvoltage hostname im_a im_b im_c im_d im_io imagetest initialchecks inj_ch interpolation interruptsubframe kernelversion lastclient led lock master maxadcphaseshift maxclkphaseshift maxdbitphaseshift measuredperiod measuredsubperiod moduleid nextframenumber nmod numinterfaces overflow packageversion parallel parameters partialreset patfname patioctrl patlimits patloop patloop0 patloop1 patloop2 patmask patnloop patnloop0 patnloop1 patnloop2 patsetbit patternX patternstart patwait patwait0 patwait1 patwait2 patwaittime patwaittime0 patwaittime1 patwaittime2 patword pedestalmode period periodl polarity port powerchip powerindex powerlist powername powervalues programfpga pulse pulsechip pulsenmove pumpprobe quad ratecorr readnrows readout readoutspeed readoutspeedlist rebootcontroller reg resetdacs resetfpga roi romode row runclk runtime rx_arping rx_clearroi rx_dbitlist rx_dbitoffset rx_discardpolicy rx_fifodepth rx_frameindex rx_framescaught rx_framesperfile rx_hostname rx_jsonaddheader rx_jsonpara rx_lastclient rx_lock rx_missingpackets rx_padding rx_printconfig rx_realudpsocksize rx_roi rx_silent rx_start rx_status rx_stop rx_tcpport rx_threads rx_udpsocksize rx_version rx_zmqfreq rx_zmqhwm rx_zmqip rx_zmqport rx_zmqstartfnum rx_zmqstream samples savepattern scan scanerrmsg selinterface serialnumber setbit settings settingslist settingspath signalindex signallist signalname slowadc slowadcindex slowadclist slowadcname slowadcvalues start status stop stopport storagecell_delay storagecell_start subdeadtime subexptime sync syncclk temp_10ge temp_adc temp_control temp_dcdc temp_event temp_fpga temp_fpgaext temp_fpgafl temp_fpgafr temp_slowadc temp_sodl temp_sodr temp_threshold templist tempvalues tengiga threshold thresholdnotb timing timinglist timingsource top transceiverenable trigger triggers triggersl trimbits trimen trimval tsamples txdelay txdelay_frame txdelay_left txdelay_right type udp_cleardst udp_dstip udp_dstip2 udp_dstlist udp_dstmac udp_dstmac2 udp_dstport udp_dstport2 udp_firstdst udp_numdst udp_reconfigure udp_srcip udp_srcip2 udp_srcmac udp_srcmac2 udp_validate update updatedetectorserver updatekernel updatemode user v_a v_b v_c v_chip v_d v_io v_limit vchip_comp_adc vchip_comp_fe vchip_cs vchip_opa_1st vchip_opa_fd vchip_ref_comp_fe versions veto vetoalg vetofile vetophoton vetoref vetostream virtual vm_a vm_b vm_c vm_d vm_io zmqhwm zmqip zmqport "
|
||||
local SLS_COMMANDS=" acquire activate adcclk adcenable adcenable10g adcindex adcinvert adclist adcname adcphase adcpipeline adcreg adcvpp apulse asamples autocompdisable badchannels blockingtrigger burstmode burstperiod bursts burstsl bustest cdsgain chipversion clearbit clearbusy clearroi clientversion clkdiv clkfreq clkphase column compdisabletime confadc config configtransceiver counters currentsource dac dacindex daclist dacname dacvalues datastream dbitclk dbitphase dbitpipeline defaultdac defaultpattern delay delayl detectorserverversion detsize diodelay dpulse dr drlist dsamples execcommand exptime exptime1 exptime2 exptime3 exptimel extrastoragecells extsampling extsamplingsrc extsig fformat filtercells filterresistor findex firmwaretest firmwareversion fliprows flowcontrol10g fmaster fname foverwrite fpath framecounter frames framesl frametime free fwrite gaincaps gainmode gappixels gatedelay gatedelay1 gatedelay2 gatedelay3 gates getbit hardwareversion highvoltage hostname im_a im_b im_c im_d im_io imagetest initialchecks inj_ch interpolation interruptsubframe kernelversion lastclient led lock master maxadcphaseshift maxclkphaseshift maxdbitphaseshift measuredperiod measuredsubperiod moduleid nextframenumber nmod numinterfaces overflow packageversion parallel parameters partialreset patfname patioctrl patlimits patloop patloop0 patloop1 patloop2 patmask patnloop patnloop0 patnloop1 patnloop2 patsetbit patternX patternstart patwait patwait0 patwait1 patwait2 patwaittime patwaittime0 patwaittime1 patwaittime2 patword pedestalmode period periodl polarity port powerchip powerindex powerlist powername powervalues programfpga pulse pulsechip pulsenmove pumpprobe quad ratecorr readnrows readout readoutspeed readoutspeedlist rebootcontroller reg resetdacs resetfpga roi romode row runclk runtime rx_arping rx_clearroi rx_dbitlist rx_dbitoffset rx_discardpolicy rx_fifodepth rx_frameindex rx_framescaught rx_framesperfile rx_hostname rx_jsonaddheader rx_jsonpara rx_lastclient rx_lock rx_missingpackets rx_padding rx_printconfig rx_realudpsocksize rx_roi rx_silent rx_start rx_status rx_stop rx_tcpport rx_threads rx_udpsocksize rx_version rx_zmqfreq rx_zmqhwm rx_zmqip rx_zmqport rx_zmqstartfnum rx_zmqstream samples savepattern scan scanerrmsg selinterface serialnumber setbit settings settingslist settingspath signalindex signallist signalname slowadc slowadcindex slowadclist slowadcname slowadcvalues start status stop stopport storagecell_delay storagecell_start subdeadtime subexptime sync syncclk temp_10ge temp_adc temp_control temp_dcdc temp_event temp_fpga temp_fpgaext temp_fpgafl temp_fpgafr temp_slowadc temp_sodl temp_sodr temp_threshold templist tempvalues tengiga threshold thresholdnotb timing timinglist timingsource top transceiverenable trigger triggers triggersl trimbits trimen trimval tsamples txdelay txdelay_frame txdelay_left txdelay_right type udp_cleardst udp_dstip udp_dstip2 udp_dstlist udp_dstmac udp_dstmac2 udp_dstport udp_dstport2 udp_firstdst udp_numdst udp_reconfigure udp_srcip udp_srcip2 udp_srcmac udp_srcmac2 udp_validate update updatedetectorserver updatekernel updatemode user v_a v_b v_c v_chip v_d v_io v_limit vchip_comp_adc vchip_comp_fe vchip_cs vchip_opa_1st vchip_opa_fd vchip_ref_comp_fe versions veto vetoalg vetofile vetophoton vetoref vetostream virtual vm_a vm_b vm_c vm_d vm_io zmqhwm zmqip zmqport "
|
||||
__acquire() {
|
||||
FCN_RETURN=""
|
||||
return 0
|
||||
@@ -401,6 +401,16 @@ fi
|
||||
fi
|
||||
return 0
|
||||
}
|
||||
__configtransceiver() {
|
||||
FCN_RETURN=""
|
||||
if [[ ${IS_GET} -eq 1 ]]; then
|
||||
if [[ "${cword}" == "2" ]]; then
|
||||
FCN_RETURN=""
|
||||
IS_PATH=1
|
||||
fi
|
||||
fi
|
||||
return 0
|
||||
}
|
||||
__counters() {
|
||||
FCN_RETURN=""
|
||||
return 0
|
||||
|
||||
@@ -441,7 +441,7 @@ period:
|
||||
function: setPeriod
|
||||
|
||||
delay:
|
||||
help: "[duration] [(optional unit) ns|us|ms|s]\n\t[Jungfrau][Moench][Gotthard][Mythen3][Gotthard2][Ctb][Moench] Delay after trigger"
|
||||
help: "[duration] [(optional unit) ns|us|ms|s]\n\t[Jungfrau][Moench][Gotthard][Mythen3][Gotthard2][Ctb][Moench][Xilinx Ctb] Delay after trigger"
|
||||
inherit_actions: TIME_COMMAND
|
||||
actions:
|
||||
GET:
|
||||
@@ -496,14 +496,14 @@ burstperiod:
|
||||
|
||||
################# TIME_GET_COMMAND #############
|
||||
delayl:
|
||||
help: "\n\t[Gotthard][Jungfrau][Moench][Mythen3][Gotthard2][Ctb] Delay Left in Acquisition. \n\t[Gotthard2] only in continuous mode."
|
||||
help: "\n\t[Gotthard][Jungfrau][Moench][Mythen3][Gotthard2][Ctb][Xilinx Ctb] Delay Left in Acquisition. \n\t[Gotthard2] only in continuous mode."
|
||||
inherit_actions: TIME_GET_COMMAND
|
||||
actions:
|
||||
GET:
|
||||
function: getDelayAfterTriggerLeft
|
||||
|
||||
periodl:
|
||||
help: "\n\t[Gotthard][Jungfrau][Moench][Ctb][Mythen3][Gotthard2] Period left for current frame. \n\t[Gotthard2] only in continuous mode."
|
||||
help: "\n\t[Gotthard][Jungfrau][Moench][Ctb][Mythen3][Gotthard2][Xilinx Ctb] Period left for current frame. \n\t[Gotthard2] only in continuous mode."
|
||||
inherit_actions: TIME_GET_COMMAND
|
||||
actions:
|
||||
GET:
|
||||
@@ -531,14 +531,14 @@ exptimel:
|
||||
function: getExptimeLeft
|
||||
|
||||
runtime:
|
||||
help: "[(optional unit) ns|us|ms|s]\n\t[Jungfrau][Moench][Mythen3][Gotthard2][Ctb] Time from detector start up.\n\t[Gotthard2] not in burst and auto mode."
|
||||
help: "[(optional unit) ns|us|ms|s]\n\t[Jungfrau][Moench][Mythen3][Gotthard2][Ctb][Xilinx Ctb] Time from detector start up.\n\t[Gotthard2] not in burst and auto mode."
|
||||
inherit_actions: TIME_GET_COMMAND
|
||||
actions:
|
||||
GET:
|
||||
function: getActualTime
|
||||
|
||||
frametime:
|
||||
help: "[(optional unit) ns|us|ms|s]\n\t[Jungfrau][Moench][Mythen3][Gotthard2][Ctb] Timestamp at a frame start.\n\t[Gotthard2] not in burst and auto mode."
|
||||
help: "[(optional unit) ns|us|ms|s]\n\t[Jungfrau][Moench][Mythen3][Gotthard2][Ctb][Xilinx Ctb] Timestamp at a frame start.\n\t[Gotthard2] not in burst and auto mode."
|
||||
inherit_actions: TIME_GET_COMMAND
|
||||
actions:
|
||||
GET:
|
||||
@@ -622,7 +622,7 @@ adcenable10g:
|
||||
function: setTenGigaADCEnableMask
|
||||
|
||||
transceiverenable:
|
||||
help: "[bitmask]\n\t[Ctb] Transceiver Enable Mask. Enable for each 4 Transceiver channel."
|
||||
help: "[bitmask]\n\t[Ctb][Xilinx Ctb] Transceiver Enable Mask. Enable for each 4 Transceiver channel."
|
||||
inherit_actions: INTEGER_COMMAND_HEX
|
||||
actions:
|
||||
GET:
|
||||
@@ -707,7 +707,7 @@ highvoltage:
|
||||
function: setHighVoltage
|
||||
|
||||
powerchip:
|
||||
help: "[0, 1]\n\t[Jungfrau][Moench][Mythen3][Gotthard2] Power the chip. \n\t[Jungfrau][Moench] Default is 0. Get will return power status. Can be off if temperature event occured (temperature over temp_threshold with temp_control enabled. Will configure chip (only chip v1.1)\n\t[Mythen3][Gotthard2] Default is 1. If module not connected or wrong module, powerchip will fail."
|
||||
help: "[0, 1]\n\t[Jungfrau][Moench][Mythen3][Gotthard2][Xilinx Ctb] Power the chip. \n\t[Jungfrau][Moench] Default is 0. Get will return power status. Can be off if temperature event occured (temperature over temp_threshold with temp_control enabled. Will configure chip (only chip v1.1)\n\t[Mythen3][Gotthard2] Default is 1. If module not connected or wrong module, powerchip will fail.\n\t[Xilinx Ctb] Default is 0. Also configures the chip if powered on."
|
||||
inherit_actions: INTEGER_COMMAND_VEC_ID
|
||||
actions:
|
||||
GET:
|
||||
@@ -764,7 +764,7 @@ readnrows:
|
||||
function: setReadNRows
|
||||
|
||||
nextframenumber:
|
||||
help: "[n_value]\n\t[Eiger][Jungfrau][Moench][Ctb] Next frame number. Stopping acquisition might result in different frame numbers for different modules."
|
||||
help: "[n_value]\n\t[Eiger][Jungfrau][Moench][Ctb][Xilinx Ctb] Next frame number. Stopping acquisition might result in different frame numbers for different modules."
|
||||
inherit_actions: INTEGER_COMMAND_VEC_ID
|
||||
actions:
|
||||
GET:
|
||||
@@ -1298,7 +1298,7 @@ dsamples:
|
||||
function: setNumberOfDigitalSamples
|
||||
|
||||
tsamples:
|
||||
help: "[n_value]\n\t[Ctb] Number of transceiver samples expected."
|
||||
help: "[n_value]\n\t[Ctb][Xilinx Ctb] Number of transceiver samples expected."
|
||||
inherit_actions: INTEGER_COMMAND_VEC_ID
|
||||
actions:
|
||||
GET:
|
||||
@@ -1307,7 +1307,7 @@ tsamples:
|
||||
function: setNumberOfTransceiverSamples
|
||||
|
||||
romode:
|
||||
help: "[analog|digital|analog_digital|transceiver|digital_transceiver]\n\t[Ctb] Readout mode. Default is analog."
|
||||
help: "[analog|digital|analog_digital|transceiver|digital_transceiver]\n\t[Ctb][xilinx Ctb] Readout mode. [Ctb] Default is analog. [Xilinx Ctb] Default is Transceiver (only one implemented so far)"
|
||||
inherit_actions: INTEGER_COMMAND_VEC_ID
|
||||
actions:
|
||||
GET:
|
||||
@@ -1555,7 +1555,7 @@ fmaster:
|
||||
################# INTEGER_IND_COMMAND #######################
|
||||
v_limit:
|
||||
inherit_actions: INTEGER_IND_COMMAND
|
||||
help: "[n_value]\n\t[Ctb] Soft limit for power supplies (ctb only) and DACS in mV."
|
||||
help: "[n_value]\n\t[Ctb][Xilinx Ctb] Soft limit for power supplies (ctb only) and DACS in mV."
|
||||
actions:
|
||||
GET:
|
||||
function: getPower
|
||||
@@ -1566,7 +1566,7 @@ v_limit:
|
||||
|
||||
v_a:
|
||||
inherit_actions: INTEGER_IND_COMMAND
|
||||
help: "[n_value]\n\t[Ctb] Power supply a in mV."
|
||||
help: "[n_value]\n\t[Ctb][Xilinx Ctb] Power supply a in mV."
|
||||
actions:
|
||||
GET:
|
||||
function: getPower
|
||||
@@ -1577,7 +1577,7 @@ v_a:
|
||||
|
||||
v_b:
|
||||
inherit_actions: INTEGER_IND_COMMAND
|
||||
help: "[n_value]\n\t[Ctb] Power supply b in mV."
|
||||
help: "[n_value]\n\t[Ctb][Xilinx Ctb] Power supply b in mV."
|
||||
actions:
|
||||
GET:
|
||||
function: getPower
|
||||
@@ -1588,7 +1588,7 @@ v_b:
|
||||
|
||||
v_c:
|
||||
inherit_actions: INTEGER_IND_COMMAND
|
||||
help: "[n_value]\n\t[Ctb] Power supply c in mV."
|
||||
help: "[n_value]\n\t[Ctb][Xilinx Ctb] Power supply c in mV."
|
||||
actions:
|
||||
GET:
|
||||
function: getPower
|
||||
@@ -1599,7 +1599,7 @@ v_c:
|
||||
|
||||
v_d:
|
||||
inherit_actions: INTEGER_IND_COMMAND
|
||||
help: "[n_value]\n\t[Ctb] Power supply d in mV."
|
||||
help: "[n_value]\n\t[Ctb][Xilinx Ctb] Power supply d in mV."
|
||||
actions:
|
||||
GET:
|
||||
function: getPower
|
||||
@@ -1610,7 +1610,7 @@ v_d:
|
||||
|
||||
v_io:
|
||||
inherit_actions: INTEGER_IND_COMMAND
|
||||
help: "[n_value]\n\t[Ctb] Power supply io in mV. Minimum 1200 mV. Must be the first power regulator to be set after fpga reset (on-board detector server start up)."
|
||||
help: "[n_value]\n\t[Ctb][Xilinx Ctb] Power supply io in mV. Minimum 1200 mV. Must be the first power regulator to be set after fpga reset (on-board detector server start up)."
|
||||
actions:
|
||||
GET:
|
||||
function: getPower
|
||||
@@ -1792,21 +1792,21 @@ patternstart:
|
||||
|
||||
resetfpga:
|
||||
inherit_actions: EXECUTE_SET_COMMAND
|
||||
help: "\n\t[Jungfrau][Moench][Ctb] Reset FPGA."
|
||||
help: "\n\t[Jungfrau][Moench][Ctb][Xilinx Ctb] Reset FPGA."
|
||||
actions:
|
||||
PUT:
|
||||
function: resetFPGA
|
||||
|
||||
rebootcontroller:
|
||||
inherit_actions: EXECUTE_SET_COMMAND
|
||||
help: "\n\t[Jungfrau][Moench][Ctb][Gotthard][Mythen3][Gotthard2] Reboot controller of detector."
|
||||
help: "\n\t[Jungfrau][Moench][Ctb][Gotthard][Mythen3][Gotthard2][Xilinx Ctb] Reboot controller of detector."
|
||||
actions:
|
||||
PUT:
|
||||
function: rebootController
|
||||
|
||||
firmwaretest:
|
||||
inherit_actions: EXECUTE_SET_COMMAND
|
||||
help: "\n\t[Jungfrau][Moench][Gotthard][Mythen3][Gotthard2][Ctb] Firmware test, ie. reads a read fixed pattern from a register."
|
||||
help: "\n\t[Jungfrau][Moench][Gotthard][Mythen3][Gotthard2][Ctb][Xilinx Ctb] Firmware test, ie. reads a read fixed pattern from a register."
|
||||
actions:
|
||||
PUT:
|
||||
function: executeFirmwareTest
|
||||
@@ -1818,6 +1818,13 @@ bustest:
|
||||
PUT:
|
||||
function: executeBusTest
|
||||
|
||||
configtransceiver:
|
||||
inherit_actions: EXECUTE_SET_COMMAND
|
||||
help: "\n\t[Xilinx Ctb] Waits for transceiver to be aligned. Chip had to be configured (powered on) before this."
|
||||
actions:
|
||||
PUT:
|
||||
function: configureTransceiver
|
||||
|
||||
################# EXECUTE_SET_COMMAND_NOID_1ARG ##############
|
||||
config:
|
||||
inherit_actions: EXECUTE_SET_COMMAND_NOID_1ARG
|
||||
@@ -2011,7 +2018,7 @@ lastclient:
|
||||
|
||||
framecounter:
|
||||
inherit_actions: GET_COMMAND
|
||||
help: "\n\t[Jungfrau][Moench][Mythen3][Gotthard2][Ctb] Number of frames from start run control.\n\t[Gotthard2] only in continuous mode."
|
||||
help: "\n\t[Jungfrau][Moench][Mythen3][Gotthard2][Ctb][Xilinx Ctb] Number of frames from start run control.\n\t[Gotthard2] only in continuous mode."
|
||||
actions:
|
||||
GET:
|
||||
function: getNumberOfFramesFromStart
|
||||
@@ -2080,7 +2087,7 @@ temp_adc:
|
||||
|
||||
temp_fpga:
|
||||
inherit_actions: GET_IND_COMMAND
|
||||
help: "[n_value]\n\t[Eiger][Jungfrau][Moench][Gotthard][Mythen3][Gotthard2] FPGA Temperature"
|
||||
help: "[n_value]\n\t[Eiger][Jungfrau][Moench][Gotthard][Mythen3][Gotthard2][Xilinx CTB] FPGA Temperature"
|
||||
actions:
|
||||
GET:
|
||||
function: getTemperature
|
||||
@@ -2307,7 +2314,7 @@ slowadcvalues:
|
||||
GETFCNLIST: getSlowADCList
|
||||
GETFCNNAME: getSlowADCNames
|
||||
GETFCN: getSlowADC
|
||||
suffix: "mV"
|
||||
suffix: "uV"
|
||||
printable_name: "*name_it++"
|
||||
|
||||
tempvalues:
|
||||
@@ -2818,7 +2825,7 @@ Exptime:
|
||||
|
||||
exptime:
|
||||
inherit_actions: Exptime
|
||||
help: "[duration] [(optional unit) ns|us|ms|s]\n\t[Eiger][Jungfrau][Moench][Gotthard][Gotthard2][Ctb] Exposure time\n\t[Mythen3] Exposure time of all gate signals in auto and trigger mode (internal gating). To specify gate index, use exptime1, exptime2, exptime3."
|
||||
help: "[duration] [(optional unit) ns|us|ms|s]\n\t[Eiger][Jungfrau][Moench][Gotthard][Gotthard2][Ctb][Xilinx Ctb] Exposure time\n\t[Mythen3] Exposure time of all gate signals in auto and trigger mode (internal gating). To specify gate index, use exptime1, exptime2, exptime3."
|
||||
actions:
|
||||
GET:
|
||||
function: getExptime
|
||||
|
||||
@@ -1615,6 +1615,28 @@ config:
|
||||
help: "\n\tFrees shared memory before loading configuration file. Set up once."
|
||||
infer_action: true
|
||||
template: true
|
||||
configtransceiver:
|
||||
actions:
|
||||
PUT:
|
||||
args:
|
||||
- arg_types: []
|
||||
argc: 0
|
||||
cast_input: []
|
||||
check_det_id: false
|
||||
convert_det_id: true
|
||||
function: configureTransceiver
|
||||
input: []
|
||||
input_types: []
|
||||
output:
|
||||
- '"successful"'
|
||||
require_det_id: true
|
||||
store_result_in_t: false
|
||||
command_name: configtransceiver
|
||||
function_alias: configtransceiver
|
||||
help: "\n\t[Xilinx Ctb] Waits for transceiver to be aligned. Chip had to be configured\
|
||||
\ (powered on) before this."
|
||||
infer_action: true
|
||||
template: true
|
||||
counters:
|
||||
actions:
|
||||
GET:
|
||||
@@ -2495,8 +2517,8 @@ delay:
|
||||
store_result_in_t: false
|
||||
command_name: delay
|
||||
function_alias: delay
|
||||
help: "[duration] [(optional unit) ns|us|ms|s]\n\t[Jungfrau][Moench][Gotthard][Mythen3][Gotthard2][Ctb][Moench]\
|
||||
\ Delay after trigger"
|
||||
help: "[duration] [(optional unit) ns|us|ms|s]\n\t[Jungfrau][Moench][Gotthard][Mythen3][Gotthard2][Ctb][Moench][Xilinx\
|
||||
\ Ctb] Delay after trigger"
|
||||
infer_action: true
|
||||
template: true
|
||||
delayl:
|
||||
@@ -2530,8 +2552,8 @@ delayl:
|
||||
store_result_in_t: true
|
||||
command_name: delayl
|
||||
function_alias: delayl
|
||||
help: "\n\t[Gotthard][Jungfrau][Moench][Mythen3][Gotthard2][Ctb] Delay Left in Acquisition.\
|
||||
\ \n\t[Gotthard2] only in continuous mode."
|
||||
help: "\n\t[Gotthard][Jungfrau][Moench][Mythen3][Gotthard2][Ctb][Xilinx Ctb] Delay\
|
||||
\ Left in Acquisition. \n\t[Gotthard2] only in continuous mode."
|
||||
infer_action: true
|
||||
template: true
|
||||
detectorserverversion:
|
||||
@@ -2891,9 +2913,10 @@ exptime:
|
||||
store_result_in_t: false
|
||||
command_name: exptime
|
||||
function_alias: exptime
|
||||
help: "[duration] [(optional unit) ns|us|ms|s]\n\t[Eiger][Jungfrau][Moench][Gotthard][Gotthard2][Ctb]\
|
||||
\ Exposure time\n\t[Mythen3] Exposure time of all gate signals in auto and trigger\
|
||||
\ mode (internal gating). To specify gate index, use exptime1, exptime2, exptime3."
|
||||
help: "[duration] [(optional unit) ns|us|ms|s]\n\t[Eiger][Jungfrau][Moench][Gotthard][Gotthard2][Ctb][Xilinx\
|
||||
\ Ctb] Exposure time\n\t[Mythen3] Exposure time of all gate signals in auto and\
|
||||
\ trigger mode (internal gating). To specify gate index, use exptime1, exptime2,\
|
||||
\ exptime3."
|
||||
infer_action: true
|
||||
template: true
|
||||
exptime1:
|
||||
@@ -3610,8 +3633,8 @@ firmwaretest:
|
||||
store_result_in_t: false
|
||||
command_name: firmwaretest
|
||||
function_alias: firmwaretest
|
||||
help: "\n\t[Jungfrau][Moench][Gotthard][Mythen3][Gotthard2][Ctb] Firmware test,\
|
||||
\ ie. reads a read fixed pattern from a register."
|
||||
help: "\n\t[Jungfrau][Moench][Gotthard][Mythen3][Gotthard2][Ctb][Xilinx Ctb] Firmware\
|
||||
\ test, ie. reads a read fixed pattern from a register."
|
||||
infer_action: true
|
||||
template: true
|
||||
firmwareversion:
|
||||
@@ -3906,8 +3929,8 @@ framecounter:
|
||||
store_result_in_t: true
|
||||
command_name: framecounter
|
||||
function_alias: framecounter
|
||||
help: "\n\t[Jungfrau][Moench][Mythen3][Gotthard2][Ctb] Number of frames from start\
|
||||
\ run control.\n\t[Gotthard2] only in continuous mode."
|
||||
help: "\n\t[Jungfrau][Moench][Mythen3][Gotthard2][Ctb][Xilinx Ctb] Number of frames\
|
||||
\ from start run control.\n\t[Gotthard2] only in continuous mode."
|
||||
infer_action: true
|
||||
template: true
|
||||
frames:
|
||||
@@ -4005,8 +4028,8 @@ frametime:
|
||||
store_result_in_t: true
|
||||
command_name: frametime
|
||||
function_alias: frametime
|
||||
help: "[(optional unit) ns|us|ms|s]\n\t[Jungfrau][Moench][Mythen3][Gotthard2][Ctb]\
|
||||
\ Timestamp at a frame start.\n\t[Gotthard2] not in burst and auto mode."
|
||||
help: "[(optional unit) ns|us|ms|s]\n\t[Jungfrau][Moench][Mythen3][Gotthard2][Ctb][Xilinx\
|
||||
\ Ctb] Timestamp at a frame start.\n\t[Gotthard2] not in burst and auto mode."
|
||||
infer_action: true
|
||||
template: true
|
||||
free:
|
||||
@@ -5474,8 +5497,8 @@ nextframenumber:
|
||||
store_result_in_t: false
|
||||
command_name: nextframenumber
|
||||
function_alias: nextframenumber
|
||||
help: "[n_value]\n\t[Eiger][Jungfrau][Moench][Ctb] Next frame number. Stopping acquisition\
|
||||
\ might result in different frame numbers for different modules."
|
||||
help: "[n_value]\n\t[Eiger][Jungfrau][Moench][Ctb][Xilinx Ctb] Next frame number.\
|
||||
\ Stopping acquisition might result in different frame numbers for different modules."
|
||||
infer_action: true
|
||||
template: true
|
||||
nmod:
|
||||
@@ -7179,8 +7202,8 @@ periodl:
|
||||
store_result_in_t: true
|
||||
command_name: periodl
|
||||
function_alias: periodl
|
||||
help: "\n\t[Gotthard][Jungfrau][Moench][Ctb][Mythen3][Gotthard2] Period left for\
|
||||
\ current frame. \n\t[Gotthard2] only in continuous mode."
|
||||
help: "\n\t[Gotthard][Jungfrau][Moench][Ctb][Mythen3][Gotthard2][Xilinx Ctb] Period\
|
||||
\ left for current frame. \n\t[Gotthard2] only in continuous mode."
|
||||
infer_action: true
|
||||
template: true
|
||||
polarity:
|
||||
@@ -7299,11 +7322,12 @@ powerchip:
|
||||
store_result_in_t: false
|
||||
command_name: powerchip
|
||||
function_alias: powerchip
|
||||
help: "[0, 1]\n\t[Jungfrau][Moench][Mythen3][Gotthard2] Power the chip. \n\t[Jungfrau][Moench]\
|
||||
\ Default is 0. Get will return power status. Can be off if temperature event\
|
||||
\ occured (temperature over temp_threshold with temp_control enabled. Will configure\
|
||||
\ chip (only chip v1.1)\n\t[Mythen3][Gotthard2] Default is 1. If module not connected\
|
||||
\ or wrong module, powerchip will fail."
|
||||
help: "[0, 1]\n\t[Jungfrau][Moench][Mythen3][Gotthard2][Xilinx Ctb] Power the chip.\
|
||||
\ \n\t[Jungfrau][Moench] Default is 0. Get will return power status. Can be off\
|
||||
\ if temperature event occured (temperature over temp_threshold with temp_control\
|
||||
\ enabled. Will configure chip (only chip v1.1)\n\t[Mythen3][Gotthard2] Default\
|
||||
\ is 1. If module not connected or wrong module, powerchip will fail.\n\t[Xilinx\
|
||||
\ Ctb] Default is 0. Also configures the chip if powered on."
|
||||
infer_action: true
|
||||
template: true
|
||||
powerindex:
|
||||
@@ -7915,8 +7939,8 @@ rebootcontroller:
|
||||
store_result_in_t: false
|
||||
command_name: rebootcontroller
|
||||
function_alias: rebootcontroller
|
||||
help: "\n\t[Jungfrau][Moench][Ctb][Gotthard][Mythen3][Gotthard2] Reboot controller\
|
||||
\ of detector."
|
||||
help: "\n\t[Jungfrau][Moench][Ctb][Gotthard][Mythen3][Gotthard2][Xilinx Ctb] Reboot\
|
||||
\ controller of detector."
|
||||
infer_action: true
|
||||
template: true
|
||||
reg:
|
||||
@@ -8030,7 +8054,7 @@ resetfpga:
|
||||
store_result_in_t: false
|
||||
command_name: resetfpga
|
||||
function_alias: resetfpga
|
||||
help: "\n\t[Jungfrau][Moench][Ctb] Reset FPGA."
|
||||
help: "\n\t[Jungfrau][Moench][Ctb][Xilinx Ctb] Reset FPGA."
|
||||
infer_action: true
|
||||
template: true
|
||||
roi:
|
||||
@@ -8117,8 +8141,9 @@ romode:
|
||||
store_result_in_t: false
|
||||
command_name: romode
|
||||
function_alias: romode
|
||||
help: "[analog|digital|analog_digital|transceiver|digital_transceiver]\n\t[Ctb]\
|
||||
\ Readout mode. Default is analog."
|
||||
help: "[analog|digital|analog_digital|transceiver|digital_transceiver]\n\t[Ctb][xilinx\
|
||||
\ Ctb] Readout mode. [Ctb] Default is analog. [Xilinx Ctb] Default is Transceiver\
|
||||
\ (only one implemented so far)"
|
||||
infer_action: true
|
||||
template: true
|
||||
row:
|
||||
@@ -8231,8 +8256,8 @@ runtime:
|
||||
store_result_in_t: true
|
||||
command_name: runtime
|
||||
function_alias: runtime
|
||||
help: "[(optional unit) ns|us|ms|s]\n\t[Jungfrau][Moench][Mythen3][Gotthard2][Ctb]\
|
||||
\ Time from detector start up.\n\t[Gotthard2] not in burst and auto mode."
|
||||
help: "[(optional unit) ns|us|ms|s]\n\t[Jungfrau][Moench][Mythen3][Gotthard2][Ctb][Xilinx\
|
||||
\ Ctb] Time from detector start up.\n\t[Gotthard2] not in burst and auto mode."
|
||||
infer_action: true
|
||||
template: true
|
||||
rx_arping:
|
||||
@@ -10096,7 +10121,7 @@ slowadcvalues:
|
||||
GETFCNLIST: getSlowADCList
|
||||
GETFCNNAME: getSlowADCNames
|
||||
printable_name: '*name_it++'
|
||||
suffix: mV
|
||||
suffix: uV
|
||||
function: ''
|
||||
input: []
|
||||
input_types: []
|
||||
@@ -10759,8 +10784,8 @@ temp_fpga:
|
||||
store_result_in_t: true
|
||||
command_name: temp_fpga
|
||||
function_alias: temp_fpga
|
||||
help: "[n_value]\n\t[Eiger][Jungfrau][Moench][Gotthard][Mythen3][Gotthard2] FPGA\
|
||||
\ Temperature"
|
||||
help: "[n_value]\n\t[Eiger][Jungfrau][Moench][Gotthard][Mythen3][Gotthard2][Xilinx\
|
||||
\ CTB] FPGA Temperature"
|
||||
infer_action: true
|
||||
template: true
|
||||
temp_fpgaext:
|
||||
@@ -11371,8 +11396,8 @@ transceiverenable:
|
||||
store_result_in_t: false
|
||||
command_name: transceiverenable
|
||||
function_alias: transceiverenable
|
||||
help: "[bitmask]\n\t[Ctb] Transceiver Enable Mask. Enable for each 4 Transceiver\
|
||||
\ channel."
|
||||
help: "[bitmask]\n\t[Ctb][Xilinx Ctb] Transceiver Enable Mask. Enable for each 4\
|
||||
\ Transceiver channel."
|
||||
infer_action: true
|
||||
template: true
|
||||
trigger:
|
||||
@@ -11617,7 +11642,7 @@ tsamples:
|
||||
store_result_in_t: false
|
||||
command_name: tsamples
|
||||
function_alias: tsamples
|
||||
help: "[n_value]\n\t[Ctb] Number of transceiver samples expected."
|
||||
help: "[n_value]\n\t[Ctb][Xilinx Ctb] Number of transceiver samples expected."
|
||||
infer_action: true
|
||||
template: true
|
||||
txdelay:
|
||||
@@ -12578,7 +12603,7 @@ v_a:
|
||||
store_result_in_t: false
|
||||
command_name: v_a
|
||||
function_alias: v_a
|
||||
help: "[n_value]\n\t[Ctb] Power supply a in mV."
|
||||
help: "[n_value]\n\t[Ctb][Xilinx Ctb] Power supply a in mV."
|
||||
infer_action: true
|
||||
template: true
|
||||
v_b:
|
||||
@@ -12624,7 +12649,7 @@ v_b:
|
||||
store_result_in_t: false
|
||||
command_name: v_b
|
||||
function_alias: v_b
|
||||
help: "[n_value]\n\t[Ctb] Power supply b in mV."
|
||||
help: "[n_value]\n\t[Ctb][Xilinx Ctb] Power supply b in mV."
|
||||
infer_action: true
|
||||
template: true
|
||||
v_c:
|
||||
@@ -12670,7 +12695,7 @@ v_c:
|
||||
store_result_in_t: false
|
||||
command_name: v_c
|
||||
function_alias: v_c
|
||||
help: "[n_value]\n\t[Ctb] Power supply c in mV."
|
||||
help: "[n_value]\n\t[Ctb][Xilinx Ctb] Power supply c in mV."
|
||||
infer_action: true
|
||||
template: true
|
||||
v_chip:
|
||||
@@ -12763,7 +12788,7 @@ v_d:
|
||||
store_result_in_t: false
|
||||
command_name: v_d
|
||||
function_alias: v_d
|
||||
help: "[n_value]\n\t[Ctb] Power supply d in mV."
|
||||
help: "[n_value]\n\t[Ctb][Xilinx Ctb] Power supply d in mV."
|
||||
infer_action: true
|
||||
template: true
|
||||
v_io:
|
||||
@@ -12809,8 +12834,9 @@ v_io:
|
||||
store_result_in_t: false
|
||||
command_name: v_io
|
||||
function_alias: v_io
|
||||
help: "[n_value]\n\t[Ctb] Power supply io in mV. Minimum 1200 mV. Must be the first\
|
||||
\ power regulator to be set after fpga reset (on-board detector server start up)."
|
||||
help: "[n_value]\n\t[Ctb][Xilinx Ctb] Power supply io in mV. Minimum 1200 mV. Must\
|
||||
\ be the first power regulator to be set after fpga reset (on-board detector server\
|
||||
\ start up)."
|
||||
infer_action: true
|
||||
template: true
|
||||
v_limit:
|
||||
@@ -12856,7 +12882,8 @@ v_limit:
|
||||
store_result_in_t: false
|
||||
command_name: v_limit
|
||||
function_alias: v_limit
|
||||
help: "[n_value]\n\t[Ctb] Soft limit for power supplies (ctb only) and DACS in mV."
|
||||
help: "[n_value]\n\t[Ctb][Xilinx Ctb] Soft limit for power supplies (ctb only) and\
|
||||
\ DACS in mV."
|
||||
infer_action: true
|
||||
template: true
|
||||
vchip_comp_adc:
|
||||
|
||||
Reference in New Issue
Block a user