From edfa8493d800a51f26e4dea6e5a968e2f73bb7c1 Mon Sep 17 00:00:00 2001
From: Dhanya Maliakal <dhanya.maliakal@psi.ch>
Date: Thu, 17 Aug 2017 16:25:04 +0200
Subject: [PATCH] command line docu. more coming up

---
 .../html/acquisition.html                     |  14 +-
 manual/slsDetectorClientDocs/html/config.html | 130 +++++++++---------
 .../latex/acquisition.tex                     |  22 +--
 manual/slsDetectorClientDocs/latex/config.tex | 130 +++++++++---------
 .../slsDetectorClientDocs/latex/doxygen.sty   |   4 +-
 manual/slsDetectorClientDocs/latex/refman.tex |   2 +-
 6 files changed, 151 insertions(+), 151 deletions(-)

diff --git a/manual/slsDetectorClientDocs/html/acquisition.html b/manual/slsDetectorClientDocs/html/acquisition.html
index 3a5b1b7b2..35a1d9211 100644
--- a/manual/slsDetectorClientDocs/html/acquisition.html
+++ b/manual/slsDetectorClientDocs/html/acquisition.html
@@ -40,7 +40,13 @@ var searchBox = new SearchBox("searchBox", "search",false,'Search');
 
 <h1><a class="anchor" id="acquisition">Acquition commands </a></h1><p>Commands to control the acquisition</p>
 <ul>
-<li><b>acquire</b> blocking acquisition (like calling sls_detector_acquire). Starts receiver and detector, writes and processes the data, stops detector. Only get!</li>
+<li><b>acquire</b> blocking acquisition (like calling sls_detector_acquire). Starts receiver and detector, writes and processes the data, stops detector. Only get! <code>Returns</code> (string)<code>"acquire unsuccessful"</code> if fails, else "" for MYTHEN, <code>"Acquired (int)"</code> for others, where int is number of frames caught.</li>
+</ul>
+<ul>
+<li><b>busy</b> returns <code>1</code> if the acquisition is active, <code>0</code> otherwise. Works when the acquisition is started in blocking mode. Only get! <code>Returns</code> <code></code>(int)</li>
+</ul>
+<ul>
+<li><b> status [s] </b> starts or stops acquisition in detector in non blocking mode. <code>s:</code> [<code>start</code>, <code>stop</code>]. <code>Returns</code> the detector status: [<code>running</code>, <code>error</code>, <code>transmitting</code>, <code>finished</code>, <code>waiting</code>, <code>idle</code>]. <code>Returns</code> <code></code>(string)</li>
 </ul>
 <ul>
 <li><b>data</b> gets all data from the detector (if any) processes them and writes them to file according to the preferences already setup (MYTHEN only). Only get!</li>
@@ -49,12 +55,6 @@ var searchBox = new SearchBox("searchBox", "search",false,'Search');
 <li><b>frame</b> gets a single frame from the detector (if any) processes it and writes it to file according to the preferences already setup (MYTHEN only). Only get!</li>
 </ul>
 <ul>
-<li><b>status</b> <code>returns</code> the detector status (string)- can be: <code>running</code>, <code>error</code>, <code>transmitting</code>, <code>finished</code>, <code>waiting</code> or <code>idle</code>; <code>put</code> can be <code>start</code> or <code>stop</code> </li>
-</ul>
-<ul>
-<li><b>busy</b> returns <code>1</code> if the acquisition is active, <code>0</code> otherwise. Works when the acquisition is started in non-blocking mode. Only get!</li>
-</ul>
-<ul>
 <li><b>readctr </b> Reads the counters from the detector memory (analog detector returning values translated into number of photons - only GOTTHARD). Cannot put.</li>
 </ul>
 <ul>
diff --git a/manual/slsDetectorClientDocs/html/config.html b/manual/slsDetectorClientDocs/html/config.html
index 82b2dfe64..2925a052d 100644
--- a/manual/slsDetectorClientDocs/html/config.html
+++ b/manual/slsDetectorClientDocs/html/config.html
@@ -56,7 +56,7 @@ var searchBox = new SearchBox("searchBox", "search",false,'Search');
 Data Structure</a></h2>
 <p>commands to configure detector data structure</p>
 <ul>
-<li><b>datastream</b> enables/disables the 0MQ data stream (0MQ threads created) from receiver to client.</li>
+<li><b> datastream </b>enables/disables the 0MQ data stream (0MQ threads created) from receiver to client. <code>Returns</code> <code></code>(int)</li>
 </ul>
 <ul>
 <li><b>free</b> Free shared memory on the control PC</li>
@@ -68,10 +68,10 @@ Data Structure</a></h2>
 <li><b>remove i</b> Removes controller <code>i</code> from the multi-detector structure. Can be used for partial readout of the detector.</li>
 </ul>
 <ul>
-<li><b>type</b> Sets/gets detector type (string).</li>
+<li><b>type</b> Sets/gets detector type. <code>Returns</code> <code></code>(string). Normally not used. Using hostname is enough.</li>
 </ul>
 <ul>
-<li><b>hostname</b> <code>put</code> adds the hostname (ot IP adress) at the end of the multi-detector structure. If used for a single controlled (i:) replaces the current hostname. Returns the list of the hostnames of the multi-detector structure.</li>
+<li><b>hostname</b> <code>put</code> adds the hostname (ot IP adress) at the end of the multi-detector structure. If used for a single controlled (i:) replaces the current hostname. Returns the list of the hostnames of the multi-detector structure. <code>Returns</code> <code></code>(string)</li>
 </ul>
 <ul>
 <li><b>id[:i]</b> Returns the id of the detector structure. i is the detector position in a multi detector system. If used a <code>put</code>, configures the id of the detector structure. i is the detector position in a multi detector system and l is the id of the detector to be added.</li>
@@ -86,161 +86,161 @@ Data Structure</a></h2>
 Status</a></h2>
 <p>commands to configure detector status</p>
 <ul>
-<li><b>online [i]</b> sets the detector in online (1) or offline (0) mode</li>
+<li><b>online [i]</b> sets the detector in online (1) or offline (0) mode. <code>Returns</code> <code></code>(int)</li>
 </ul>
 <ul>
-<li><b>checkonline</b> returns the hostnames of all detectors without connecting to them</li>
+<li><b>checkonline</b> returns the hostnames of all detectors without connecting to them. <code>Returns</code> (string) "All online" or "[list of offline hostnames] : Not online".</li>
 </ul>
 <ul>
-<li><b>activate</b> Activates/Deactivates the detector. Deactivated detector does not send data. Used for EIGER only.</li>
+<li><b>activate</b> Activates/Deactivates the detector. Deactivated detector does not send data. Used for EIGER only. <code>Returns</code> <code></code>(int)</li>
 </ul>
 <h2><a class="anchor" id="configsize">
 Data Size</a></h2>
 <p>commands to configure detector data size</p>
 <ul>
-<li><b>nmod [i]</b> sets/gets the number of modules of the detector. Used for MYTHEN only.</li>
+<li><b>nmod [i]</b> sets/gets the number of modules of the detector. Used for MYTHEN only. <code>Returns</code> <code></code>(int)</li>
 </ul>
 <ul>
-<li><b>maxmod </b> Gets the maximum number of modules of the detector. Used for MYTHEN only. Cannot put!</li>
+<li><b>maxmod </b> Gets the maximum number of modules of the detector. Used for MYTHEN only. Cannot put! <code>Returns</code> <code></code>(int)</li>
 </ul>
 <ul>
-<li><b>dr [i]</b> sets/gets the dynamic range of detector. Mythen [4,8,16,24]. Eiger [4,8,16,32]. Others cannot put!</li>
+<li><b>dr [i]</b> sets/gets the dynamic range of detector. Mythen [4,8,16,24]. Eiger [4,8,16,32]. Others cannot put! <code>Returns</code> <code></code>(int)</li>
 </ul>
 <ul>
-<li><b>roi [i] [xmin] [xmax] [ymin] [ymax] </b> sets region of interest of the detector, where i is number of rois;i=0 to clear rois. Used for GOTTHARD only.</li>
+<li><b>roi [i] [xmin] [xmax] [ymin] [ymax] </b> sets region of interest of the detector, where i is number of rois;i=0 to clear rois. Used for GOTTHARD only. <code>Returns</code> <code></code>(int)</li>
 </ul>
 <ul>
-<li><b>detsizechan [xmax] [ymax]</b> sets the maximum number of channels in each dimension for complete detector set; -1 is no limit. Use for multi-detector system as first command in config file.</li>
+<li><b>detsizechan [xmax] [ymax]</b> sets the maximum number of channels in each dimension for complete detector set; -1 is no limit. Use for multi-detector system as first command in config file. <code>Returns</code> <code></code>("int int")</li>
 </ul>
 <ul>
-<li><b>roimask [i]</b> ??</li>
+<li><b>roimask [i]</b> ?? <code>Returns</code> <code></code>(int) in hexadecimal</li>
 </ul>
 <ul>
-<li><b>flippeddatax [i]</b> enables/disables data being flipped across x axis. 1 enables, 0 disables. Used for EIGER only. 1 for bottom half-module, 0 for top-half module.</li>
+<li><b>flippeddatax [i]</b> enables/disables data being flipped across x axis. 1 enables, 0 disables. Used for EIGER only. 1 for bottom half-module, 0 for top-half module. <code>Returns</code> <code></code>(int)</li>
 </ul>
 <ul>
-<li><b>tengiga [i]</b> enables/disables 10GbE in system (detector &amp; receiver). 1 enabled 10GbE, 0 enables 1GbE. Used in EIGER only.</li>
+<li><b>tengiga [i]</b> enables/disables 10GbE in system (detector &amp; receiver). 1 enabled 10GbE, 0 enables 1GbE. Used in EIGER only. <code>Returns</code> <code></code>(int)</li>
 </ul>
 <h2><a class="anchor" id="configflags">
 Flags</a></h2>
 <p>commands to configure detector flags</p>
 <ul>
-<li><b>flags [flag]</b> sets/gets the readout flags to mode. Options: none, storeinram, tot, continous, parallel, nonparallel, safe, digital, analog_digital, unknown. Used for MYTHEN and EIGER only.</li>
+<li><b>flags [flag]</b> sets/gets the readout flags to mode. Options: none, storeinram, tot, continous, parallel, nonparallel, safe, digital, analog_digital, unknown. Used for MYTHEN and EIGER only. <code>Returns</code> <code></code>(string). put takes one string and <code>returns</code> concatenation of all active flags separated by spaces.</li>
 </ul>
 <ul>
 <li><b>extsig:[i] [flag]</b> sets/gets the mode of the external signal i. Options: <code>off</code>, <code>gate_in_active_high</code>, <code>gate_in_active_low</code>, <code>trigger_in_rising_edge</code>, <code>trigger_in_falling_edge</code>, <code>ro_trigger_in_rising_edge</code>, <code>ro_trigger_in_falling_edge</code>, <code>gate_out_active_high</code>, <code>gate_out_active_low</code>, <code>trigger_out_rising_edge</code>, <code>trigger_out_falling_edge</code>, <code>ro_trigger_out_rising_edge</code>, <code>ro_trigger_out_falling_edge</code>. <br/>
- Used in MYTHEN, GOTTHARD, PROPIX only.</li>
+ Used in MYTHEN, GOTTHARD, PROPIX only. <code>Returns</code> <code></code>(string)</li>
 </ul>
 <h2><a class="anchor" id="configfpga">
 FPGA</a></h2>
 <p>commands to configure FPGA of the detector</p>
 <ul>
-<li><b>programfpga [file]</b> programs the FPGA with file f (with .pof extension). Used for JUNGFRAU, MOENCH only. Only put!</li>
+<li><b>programfpga [file]</b> programs the FPGA with file f (with .pof extension). Used for JUNGFRAU, MOENCH only. Only put! <code>Returns</code> <code></code>("successful", "unsuccessful")</li>
 </ul>
 <ul>
-<li><b>resetfpga [f]</b> resets FPGA, where f can be any value. Used for JUNGFRAU only. Only put!</li>
+<li><b>resetfpga [f]</b> resets FPGA, where f can be any value. Used for JUNGFRAU only. Only put! <code>Returns</code> <code></code>("successful", "unsuccessful")</li>
 </ul>
 <h2><a class="anchor" id="configchip">
 Chip</a></h2>
 <p>commands to configure chip of the detector</p>
 <ul>
-<li><b>powerchip [i]</b> Powers on/off the chip. 1 powers on, 0 powers off. Can also get the power status. Used for JUNGFRAU only.</li>
+<li><b>powerchip [i]</b> Powers on/off the chip. 1 powers on, 0 powers off. Can also get the power status. Used for JUNGFRAU only. <code>Returns</code> <code></code>(int)</li>
 </ul>
 <ul>
-<li><b>led [i]</b> sets/gets the led status. 1 on, 0 off. Used for MOENCH only ??</li>
+<li><b>led [i]</b> sets/gets the led status. 1 on, 0 off. Used for MOENCH only ?? <code>Returns</code> <code></code>(int)</li>
 </ul>
 <ul>
-<li><b>pulse [n] [x] [y]</b> pulses pixel at coordinates (x,y) n number of times. Used in EIGER only. Only put!</li>
+<li><b>pulse [n] [x] [y]</b> pulses pixel at coordinates (x,y) n number of times. Used in EIGER only. Only put! <code>Returns</code> <code></code>("successful", "unsuccessful")</li>
 </ul>
 <ul>
-<li><b>pulsenmove [n] [x] [y]</b> pulses pixel n number of times and moves relatively by x value (x axis) and y value(y axis). Used in EIGER only. Only put!</li>
+<li><b>pulsenmove [n] [x] [y]</b> pulses pixel n number of times and moves relatively by x value (x axis) and y value(y axis). Used in EIGER only. Only put! <code>Returns</code> <code></code>("successful", "unsuccessful")</li>
 </ul>
 <ul>
-<li><b>pulsechip [n]</b>pulses chip n number of times, while n=-1 will reset it to normal mode. Used in EIGER only. Only put!</li>
+<li><b>pulsechip [n]</b>pulses chip n number of times, while n=-1 will reset it to normal mode. Used in EIGER only. Only put! <code>Returns</code> <code></code>("successful", "unsuccessful")</li>
 </ul>
 <h2><a class="anchor" id="configversions">
 Versions</a></h2>
 <p>Commands to check versions of each subsystem</p>
 <ul>
-<li><b>moduleversion:[i]</b> Gets the firmware version of module i. Used for MYTHEN only. Only get!</li>
+<li><b>moduleversion:[i]</b> Gets the firmware version of module i. Used for MYTHEN only. Only get! <code>Returns</code> <code></code>(long int) in hexadecimal or "undefined module number"</li>
 </ul>
 <ul>
-<li><b>detectornumber</b> Gets the serial number or MAC of detector. Only get!</li>
+<li><b>detectornumber</b> Gets the serial number or MAC of detector. Only get! <code>Returns</code> <code></code>(long int) in hexadecimal</li>
 </ul>
 <ul>
-<li><b>modulenumber:[i]</b> Gets the serial number of module i. Used for MYTHEN only. Only get!</li>
+<li><b>modulenumber:[i]</b> Gets the serial number of module i. Used for MYTHEN only. Only get! <code>Returns</code> <code></code>(long int) in hexadecimal or "undefined module number"</li>
 </ul>
 <ul>
-<li><b>detectorversion</b> Gets the firmware version of detector. Only get!</li>
+<li><b>detectorversion</b> Gets the firmware version of detector. Only get! <code>Returns</code> <code></code>(long int) in hexadecimal</li>
 </ul>
 <ul>
-<li><b>softwareversion</b> Gets the software version of detector server. Only get!</li>
+<li><b>softwareversion</b> Gets the software version of detector server. Only get! <code>Returns</code> <code></code>(long int) in hexadecimal</li>
 </ul>
 <ul>
-<li><b>thisversion</b> Gets the software version of this client software. Only get!</li>
+<li><b>thisversion</b> Gets the software version of this client software. Only get! <code>Returns</code> <code></code>(long int) in hexadecimal</li>
 </ul>
 <ul>
-<li><b>receiverversion</b> Gets the software version of receiver. Only get!</li>
+<li><b>receiverversion</b> Gets the software version of receiver. Only get! <code>Returns</code> <code></code>(long int) in hexadecimal</li>
 </ul>
 <h2><a class="anchor" id="configtimers">
 Timers</a></h2>
 <p>commands to configure the timers of the detector</p>
 <ul>
-<li><b>timing [mode]</b> sets/gets synchronization mode of the detector. Mode: auto, trigger, ro_trigger, gating, triggered_gating</li>
+<li><b>timing [mode]</b> sets/gets synchronization mode of the detector. Mode: auto, trigger, ro_trigger, gating, triggered_gating <code>Returns</code> <code></code>(string)</li>
 </ul>
 <ul>
-<li><b>exptime [i]</b> sets/gets exposure time in s</li>
+<li><b>exptime [i]</b> sets/gets exposure time in s. <code>Returns</code> <code></code>(double with 9 decimal digits)</li>
 </ul>
 <ul>
-<li><b>subexptime [i]</b> sets/gets sub exposure time in s. Used in EIGER only in 32 bit mode.</li>
+<li><b>subexptime [i]</b> sets/gets sub exposure time in s. Used in EIGER only in 32 bit mode. <code>Returns</code> <code></code>(double with 9 decimal digits)</li>
 </ul>
 <ul>
-<li><b>period [i]</b> sets/gets frame period in s.</li>
+<li><b>period [i]</b> sets/gets frame period in s. <code>Returns</code> <code></code>(double with 9 decimal digits)</li>
 </ul>
 <ul>
-<li><b>delay [i]</b> sets/gets delay in s. Used in MYTHEN, GOTTHARD only</li>
+<li><b>delay [i]</b> sets/gets delay in s. Used in MYTHEN, GOTTHARD only. <code>Returns</code> <code></code>(double with 9 decimal digits)</li>
 </ul>
 <ul>
-<li><b>gates [i]</b> sets/gets number of gates. Used in MYTHEN, GOTTHARD, EIGER only</li>
+<li><b>gates [i]</b> sets/gets number of gates. Used in MYTHEN, GOTTHARD only. <code>Returns</code> <code></code>(long long int)</li>
 </ul>
 <ul>
-<li><b>gates [i]</b> sets/gets number of frames. If <code>timing</code> is not <code>auto</code>, then it is the number of frames per cycle/trigger.</li>
+<li><b>frames [i]</b> sets/gets number of frames. If <code>timing</code> is not <code>auto</code>, then it is the number of frames per cycle/trigger. <code>Returns</code> <code></code>(long long int)</li>
 </ul>
 <ul>
-<li><b>cycles [i]</b> sets/gets number of triggers. Timing mode should be set appropriately.</li>
+<li><b>cycles [i]</b> sets/gets number of triggers. Timing mode should be set appropriately. <code>Returns</code> <code></code>(long long int)</li>
 </ul>
 <ul>
-<li><b>probes [i]</b> sets/gets number of probes to accumulate. When setting, max 3! cycles should be set to 1, frames to the number of pump-probe events. Used in MYTHEN only</li>
+<li><b>probes [i]</b> sets/gets number of probes to accumulate. When setting, max 3! cycles should be set to 1, frames to the number of pump-probe events. Used in MYTHEN only. <code>Returns</code> <code></code>(long long int)</li>
 </ul>
 <ul>
-<li><b>measurements [i]</b> sets/gets number of measurements.</li>
+<li><b>measurements [i]</b> sets/gets number of measurements. <code>Returns</code> <code></code>(long long int)</li>
 </ul>
 <ul>
-<li><b>samples [i]</b> sets/gets number of samples expected from the jctb. Used in CHIP TEST BOARD only.</li>
+<li><b>samples [i]</b> sets/gets number of samples expected from the jctb. Used in CHIP TEST BOARD only. <code>Returns</code> <code></code>(long long int)</li>
 </ul>
 <h2><a class="anchor" id="configrotimers">
 RO Timers</a></h2>
 <p>commands to configure the read only timers of the detector</p>
 <ul>
-<li><b>exptimel</b> gets exposure time left. Used in MYTHEN, GOTTHARD only. Only get!</li>
+<li><b>exptimel</b> gets exposure time left. Used in MYTHEN, GOTTHARD only. Only get! <code>Returns</code> <code></code>(double with 9 decimal digits)</li>
 </ul>
 <ul>
-<li><b>periodl</b> gets frame period left. Used in MYTHEN, GOTTHARD only. Only get!</li>
+<li><b>periodl</b> gets frame period left. Used in MYTHEN, GOTTHARD only. Only get! <code>Returns</code> <code></code>(double with 9 decimal digits)</li>
 </ul>
 <ul>
-<li><b>delayl</b> gets delay left. Used in MYTHEN, GOTTHARD only. Only get!</li>
+<li><b>delayl</b> gets delay left. Used in MYTHEN, GOTTHARD only. Only get! <code>Returns</code> <code></code>(double with 9 decimal digits)</li>
 </ul>
 <ul>
-<li><b>gatesl</b> gets number of gates left. Used in MYTHEN, GOTTHARD only. Only get!</li>
+<li><b>gatesl</b> gets number of gates left. Used in MYTHEN, GOTTHARD only. Only get! <code>Returns</code> <code></code>(double with 9 decimal digits)</li>
 </ul>
 <ul>
-<li><b>framesl</b> gets number of frames left. Used in MYTHEN, GOTTHARD only. Only get!</li>
+<li><b>framesl</b> gets number of frames left. Used in MYTHEN, GOTTHARD only. Only get! <code>Returns</code> <code></code>(double with 9 decimal digits)</li>
 </ul>
 <ul>
-<li><b>cyclesl</b> gets number of cylces left. Used in MYTHEN, GOTTHARD only. Only get!</li>
+<li><b>cyclesl</b> gets number of cylces left. Used in MYTHEN, GOTTHARD only. Only get! <code>Returns</code> <code></code>(double with 9 decimal digits)</li>
 </ul>
 <ul>
-<li><b>probesl</b> gets number of probes left. Used in MYTHEN, GOTTHARD only. Only get!</li>
+<li><b>probesl</b> gets number of probes left. Used in MYTHEN, GOTTHARD only. Only get! <code>Returns</code> <code></code>(double with 9 decimal digits)</li>
 </ul>
 <ul>
 <li><b>now</b> ??? Only get!</li>
@@ -255,58 +255,58 @@ RO Timers</a></h2>
 Speed</a></h2>
 <p>commands to configure speed of detector</p>
 <ul>
-<li><b>clkdivider [i]</b> sets/gets the readout clock divider. EIGER, JUNGFRAU [0(fast speed), 1(half speed), 2(quarter speed)]. MYTHEN[???]</li>
+<li><b>clkdivider [i]</b> sets/gets the readout clock divider. EIGER, JUNGFRAU [0(fast speed), 1(half speed), 2(quarter speed)]. MYTHEN[???]. <code>Returns</code> <code></code>(int)</li>
 </ul>
 <ul>
-<li><b>clkdivider [i]</b> sets/gets length of set/reset signals (in clock cycles). Used in MYTHEN only</li>
+<li><b>clkdivider [i]</b> sets/gets length of set/reset signals (in clock cycles). Used in MYTHEN only. <code>Returns</code> <code></code>(int)</li>
 </ul>
 <ul>
-<li><b>clkdivider [i]</b> sets/gets waitstates of the bus interface (in clock cycles). Used in MYTHEN only</li>
+<li><b>clkdivider [i]</b> sets/gets waitstates of the bus interface (in clock cycles). Used in MYTHEN only. <code>Returns</code> <code></code>(int)</li>
 </ul>
 <ul>
-<li><b>clkdivider [i]</b> sets/gets clock divider in tot mode. Used in MYTHEN only</li>
+<li><b>clkdivider [i]</b> sets/gets clock divider in tot mode. Used in MYTHEN only. <code>Returns</code> <code></code>(int)</li>
 </ul>
 <ul>
-<li><b>clkdivider [i]</b> sets/gets duty cycle of the tot clock. Used in MYTHEN only</li>
+<li><b>clkdivider [i]</b> sets/gets duty cycle of the tot clock. Used in MYTHEN only. <code>Returns</code> <code></code>(int)</li>
 </ul>
 <ul>
-<li><b>phasestep [i]</b> ???</li>
+<li><b>phasestep [i]</b> ???. <code>Returns</code> <code></code>(int)</li>
 </ul>
 <ul>
-<li><b>oversampling [i]</b> ???</li>
+<li><b>oversampling [i]</b> ???. <code>Returns</code> <code></code>(int)</li>
 </ul>
 <ul>
-<li><b>adcclk [i]</b> ???</li>
+<li><b>adcclk [i]</b> ???. <code>Returns</code> <code></code>(int)</li>
 </ul>
 <ul>
-<li><b>adcphase [i]</b> ??? Used in MYTHEN, JUNGFRAU only.</li>
+<li><b>adcphase [i]</b> ??? Used in MYTHEN, JUNGFRAU only. <code>Returns</code> <code></code>(int)</li>
 </ul>
 <ul>
-<li><b>adcpipeline [i]</b> ???</li>
+<li><b>adcpipeline [i]</b> ??? <code>Returns</code> <code></code>(int)</li>
 </ul>
 <ul>
-<li><b>dbitclk [i]</b> ???</li>
+<li><b>dbitclk [i]</b> ??? <code>Returns</code> <code></code>(int)</li>
 </ul>
 <ul>
-<li><b>dbitphase [i]</b> ???</li>
+<li><b>dbitphase [i]</b> ??? <code>Returns</code> <code></code>(int)</li>
 </ul>
 <ul>
-<li><b>dbitpipeline [i]</b> ???</li>
+<li><b>dbitpipeline [i]</b> ??? <code>Returns</code> <code></code>(int)</li>
 </ul>
 <h2><a class="anchor" id="configsettings">
 Detector Parameters</a></h2>
 <p>commands to configure/retrieve configuration of detector</p>
 <ul>
-<li><b>config [fname]</b> sets/saves detector/receiver to configuration contained in fname. Same as executing sls_detector_put for every line. Normally a one time operation.</li>
+<li><b>config [fname]</b> sets/saves detector/receiver to configuration contained in fname. Same as executing sls_detector_put for every line. Normally a one time operation. <code>Returns</code> <code></code>(string) fname</li>
 </ul>
 <ul>
-<li><b>rx_printconfig</b> prints the receiver configuration. Only get!</li>
+<li><b>rx_printconfig</b> prints the receiver configuration. Only get! <code>Returns</code> <code></code>(string)</li>
 </ul>
 <ul>
-<li><b>parameters [fname]</b> sets/saves detector parameters contained in fname. Normally once per different measurement.</li>
+<li><b>parameters [fname]</b> sets/saves detector parameters contained in fname. Normally once per different measurement. <code>Returns</code> <code></code>(string) fname</li>
 </ul>
 <ul>
-<li><b>setup [fname]</b> sets/saves detector complete setup contained in fname (extensions automatically generated), including trimfiles, ff coefficients etc. </li>
+<li><b>setup [fname]</b> sets/saves detector complete setup contained in fname (extensions automatically generated), including trimfiles, ff coefficients etc. <code>Returns</code> <code></code>(string) fname </li>
 </ul>
 </div>
 <!--- window showing the filter options -->
diff --git a/manual/slsDetectorClientDocs/latex/acquisition.tex b/manual/slsDetectorClientDocs/latex/acquisition.tex
index 29603ddd1..afc5b0bf6 100644
--- a/manual/slsDetectorClientDocs/latex/acquisition.tex
+++ b/manual/slsDetectorClientDocs/latex/acquisition.tex
@@ -2,7 +2,17 @@ Commands to control the acquisition
 
 
 \begin{DoxyItemize}
-\item {\bfseries acquire} blocking acquisition (like calling sls\_\-detector\_\-acquire). Starts receiver and detector, writes and processes the data, stops detector. Only get!
+\item {\bfseries acquire} blocking acquisition (like calling sls\_\-detector\_\-acquire). Starts receiver and detector, writes and processes the data, stops detector. Only get! {\ttfamily Returns} (string){\ttfamily \char`\"{}acquire unsuccessful\char`\"{}} if fails, else \char`\"{}\char`\"{} for MYTHEN, {\ttfamily \char`\"{}Acquired (int)\char`\"{}} for others, where int is number of frames caught.
+\end{DoxyItemize}
+
+
+\begin{DoxyItemize}
+\item {\bfseries busy} returns {\ttfamily 1} if the acquisition is active, {\ttfamily 0} otherwise. Works when the acquisition is started in blocking mode. Only get! {\ttfamily Returns} {\ttfamily }(int)
+\end{DoxyItemize}
+
+
+\begin{DoxyItemize}
+\item {\bfseries  status \mbox{[}s\mbox{]} } starts or stops acquisition in detector in non blocking mode. {\ttfamily s:} \mbox{[}{\ttfamily start}, {\ttfamily stop}\mbox{]}. {\ttfamily Returns} the detector status: \mbox{[}{\ttfamily running}, {\ttfamily error}, {\ttfamily transmitting}, {\ttfamily finished}, {\ttfamily waiting}, {\ttfamily idle}\mbox{]}. {\ttfamily Returns} {\ttfamily }(string)
 \end{DoxyItemize}
 
 
@@ -16,16 +26,6 @@ Commands to control the acquisition
 \end{DoxyItemize}
 
 
-\begin{DoxyItemize}
-\item {\bfseries status} {\ttfamily returns} the detector status (string)-\/ can be: {\ttfamily running}, {\ttfamily error}, {\ttfamily transmitting}, {\ttfamily finished}, {\ttfamily waiting} or {\ttfamily idle}; {\ttfamily put} can be {\ttfamily start} or {\ttfamily stop} 
-\end{DoxyItemize}
-
-
-\begin{DoxyItemize}
-\item {\bfseries busy} returns {\ttfamily 1} if the acquisition is active, {\ttfamily 0} otherwise. Works when the acquisition is started in non-\/blocking mode. Only get!
-\end{DoxyItemize}
-
-
 \begin{DoxyItemize}
 \item {\bfseries readctr } Reads the counters from the detector memory (analog detector returning values translated into number of photons -\/ only GOTTHARD). Cannot put.
 \end{DoxyItemize}
diff --git a/manual/slsDetectorClientDocs/latex/config.tex b/manual/slsDetectorClientDocs/latex/config.tex
index ac130ad48..6bf0328b7 100644
--- a/manual/slsDetectorClientDocs/latex/config.tex
+++ b/manual/slsDetectorClientDocs/latex/config.tex
@@ -16,7 +16,7 @@ commands to configure detector data structure
 
 
 \begin{DoxyItemize}
-\item {\bfseries datastream} enables/disables the 0MQ data stream (0MQ threads created) from receiver to client.
+\item {\bfseries  datastream }enables/disables the 0MQ data stream (0MQ threads created) from receiver to client. {\ttfamily Returns} {\ttfamily }(int)
 \end{DoxyItemize}
 
 
@@ -36,12 +36,12 @@ commands to configure detector data structure
 
 
 \begin{DoxyItemize}
-\item {\bfseries type} Sets/gets detector type (string).
+\item {\bfseries type} Sets/gets detector type. {\ttfamily Returns} {\ttfamily }(string). Normally not used. Using hostname is enough.
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries hostname} {\ttfamily put} adds the hostname (ot IP adress) at the end of the multi-\/detector structure. If used for a single controlled (i:) replaces the current hostname. Returns the list of the hostnames of the multi-\/detector structure.
+\item {\bfseries hostname} {\ttfamily put} adds the hostname (ot IP adress) at the end of the multi-\/detector structure. If used for a single controlled (i:) replaces the current hostname. Returns the list of the hostnames of the multi-\/detector structure. {\ttfamily Returns} {\ttfamily }(string)
 \end{DoxyItemize}
 
 
@@ -62,235 +62,235 @@ commands to configure detector status
 
 
 \begin{DoxyItemize}
-\item {\bfseries online \mbox{[}i\mbox{]}} sets the detector in online (1) or offline (0) mode
+\item {\bfseries online \mbox{[}i\mbox{]}} sets the detector in online (1) or offline (0) mode. {\ttfamily Returns} {\ttfamily }(int)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries checkonline} returns the hostnames of all detectors without connecting to them
+\item {\bfseries checkonline} returns the hostnames of all detectors without connecting to them. {\ttfamily Returns} (string) \char`\"{}All online\char`\"{} or \char`\"{}\mbox{[}list of offline hostnames\mbox{]} : Not online\char`\"{}.
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries activate} Activates/Deactivates the detector. Deactivated detector does not send data. Used for EIGER only.
+\item {\bfseries activate} Activates/Deactivates the detector. Deactivated detector does not send data. Used for EIGER only. {\ttfamily Returns} {\ttfamily }(int)
 \end{DoxyItemize}\hypertarget{config_configsize}{}\subsection{Data Size}\label{config_configsize}
 commands to configure detector data size
 
 
 \begin{DoxyItemize}
-\item {\bfseries nmod \mbox{[}i\mbox{]}} sets/gets the number of modules of the detector. Used for MYTHEN only.
+\item {\bfseries nmod \mbox{[}i\mbox{]}} sets/gets the number of modules of the detector. Used for MYTHEN only. {\ttfamily Returns} {\ttfamily }(int)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries maxmod } Gets the maximum number of modules of the detector. Used for MYTHEN only. Cannot put!
+\item {\bfseries maxmod } Gets the maximum number of modules of the detector. Used for MYTHEN only. Cannot put! {\ttfamily Returns} {\ttfamily }(int)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries dr \mbox{[}i\mbox{]}} sets/gets the dynamic range of detector. Mythen \mbox{[}4,8,16,24\mbox{]}. Eiger \mbox{[}4,8,16,32\mbox{]}. Others cannot put!
+\item {\bfseries dr \mbox{[}i\mbox{]}} sets/gets the dynamic range of detector. Mythen \mbox{[}4,8,16,24\mbox{]}. Eiger \mbox{[}4,8,16,32\mbox{]}. Others cannot put! {\ttfamily Returns} {\ttfamily }(int)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries roi \mbox{[}i\mbox{]} \mbox{[}xmin\mbox{]} \mbox{[}xmax\mbox{]} \mbox{[}ymin\mbox{]} \mbox{[}ymax\mbox{]} } sets region of interest of the detector, where i is number of rois;i=0 to clear rois. Used for GOTTHARD only.
+\item {\bfseries roi \mbox{[}i\mbox{]} \mbox{[}xmin\mbox{]} \mbox{[}xmax\mbox{]} \mbox{[}ymin\mbox{]} \mbox{[}ymax\mbox{]} } sets region of interest of the detector, where i is number of rois;i=0 to clear rois. Used for GOTTHARD only. {\ttfamily Returns} {\ttfamily }(int)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries detsizechan \mbox{[}xmax\mbox{]} \mbox{[}ymax\mbox{]}} sets the maximum number of channels in each dimension for complete detector set; -\/1 is no limit. Use for multi-\/detector system as first command in config file.
+\item {\bfseries detsizechan \mbox{[}xmax\mbox{]} \mbox{[}ymax\mbox{]}} sets the maximum number of channels in each dimension for complete detector set; -\/1 is no limit. Use for multi-\/detector system as first command in config file. {\ttfamily Returns} {\ttfamily }(\char`\"{}int int\char`\"{})
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries roimask \mbox{[}i\mbox{]}} ??
+\item {\bfseries roimask \mbox{[}i\mbox{]}} ?? {\ttfamily Returns} {\ttfamily }(int) in hexadecimal
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries flippeddatax \mbox{[}i\mbox{]}} enables/disables data being flipped across x axis. 1 enables, 0 disables. Used for EIGER only. 1 for bottom half-\/module, 0 for top-\/half module.
+\item {\bfseries flippeddatax \mbox{[}i\mbox{]}} enables/disables data being flipped across x axis. 1 enables, 0 disables. Used for EIGER only. 1 for bottom half-\/module, 0 for top-\/half module. {\ttfamily Returns} {\ttfamily }(int)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries tengiga \mbox{[}i\mbox{]}} enables/disables 10GbE in system (detector \& receiver). 1 enabled 10GbE, 0 enables 1GbE. Used in EIGER only.
+\item {\bfseries tengiga \mbox{[}i\mbox{]}} enables/disables 10GbE in system (detector \& receiver). 1 enabled 10GbE, 0 enables 1GbE. Used in EIGER only. {\ttfamily Returns} {\ttfamily }(int)
 \end{DoxyItemize}\hypertarget{config_configflags}{}\subsection{Flags}\label{config_configflags}
 commands to configure detector flags
 
 
 \begin{DoxyItemize}
-\item {\bfseries flags \mbox{[}flag\mbox{]}} sets/gets the readout flags to mode. Options: none, storeinram, tot, continous, parallel, nonparallel, safe, digital, analog\_\-digital, unknown. Used for MYTHEN and EIGER only.
+\item {\bfseries flags \mbox{[}flag\mbox{]}} sets/gets the readout flags to mode. Options: none, storeinram, tot, continous, parallel, nonparallel, safe, digital, analog\_\-digital, unknown. Used for MYTHEN and EIGER only. {\ttfamily Returns} {\ttfamily }(string). put takes one string and {\ttfamily returns} concatenation of all active flags separated by spaces.
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
 \item {\bfseries extsig:\mbox{[}i\mbox{]} \mbox{[}flag\mbox{]}} sets/gets the mode of the external signal i. Options: {\ttfamily off}, {\ttfamily gate\_\-in\_\-active\_\-high}, {\ttfamily gate\_\-in\_\-active\_\-low}, {\ttfamily trigger\_\-in\_\-rising\_\-edge}, {\ttfamily trigger\_\-in\_\-falling\_\-edge}, {\ttfamily ro\_\-trigger\_\-in\_\-rising\_\-edge}, {\ttfamily ro\_\-trigger\_\-in\_\-falling\_\-edge}, {\ttfamily gate\_\-out\_\-active\_\-high}, {\ttfamily gate\_\-out\_\-active\_\-low}, {\ttfamily trigger\_\-out\_\-rising\_\-edge}, {\ttfamily trigger\_\-out\_\-falling\_\-edge}, {\ttfamily ro\_\-trigger\_\-out\_\-rising\_\-edge}, {\ttfamily ro\_\-trigger\_\-out\_\-falling\_\-edge}. \par
- Used in MYTHEN, GOTTHARD, PROPIX only.
+ Used in MYTHEN, GOTTHARD, PROPIX only. {\ttfamily Returns} {\ttfamily }(string)
 \end{DoxyItemize}\hypertarget{config_configfpga}{}\subsection{FPGA}\label{config_configfpga}
 commands to configure FPGA of the detector
 
 
 \begin{DoxyItemize}
-\item {\bfseries programfpga \mbox{[}file\mbox{]}} programs the FPGA with file f (with .pof extension). Used for JUNGFRAU, MOENCH only. Only put!
+\item {\bfseries programfpga \mbox{[}file\mbox{]}} programs the FPGA with file f (with .pof extension). Used for JUNGFRAU, MOENCH only. Only put! {\ttfamily Returns} {\ttfamily }(\char`\"{}successful\char`\"{}, \char`\"{}unsuccessful\char`\"{})
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries resetfpga \mbox{[}f\mbox{]}} resets FPGA, where f can be any value. Used for JUNGFRAU only. Only put!
+\item {\bfseries resetfpga \mbox{[}f\mbox{]}} resets FPGA, where f can be any value. Used for JUNGFRAU only. Only put! {\ttfamily Returns} {\ttfamily }(\char`\"{}successful\char`\"{}, \char`\"{}unsuccessful\char`\"{})
 \end{DoxyItemize}\hypertarget{config_configchip}{}\subsection{Chip}\label{config_configchip}
 commands to configure chip of the detector
 
 
 \begin{DoxyItemize}
-\item {\bfseries powerchip \mbox{[}i\mbox{]}} Powers on/off the chip. 1 powers on, 0 powers off. Can also get the power status. Used for JUNGFRAU only.
+\item {\bfseries powerchip \mbox{[}i\mbox{]}} Powers on/off the chip. 1 powers on, 0 powers off. Can also get the power status. Used for JUNGFRAU only. {\ttfamily Returns} {\ttfamily }(int)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries led \mbox{[}i\mbox{]}} sets/gets the led status. 1 on, 0 off. Used for MOENCH only ??
+\item {\bfseries led \mbox{[}i\mbox{]}} sets/gets the led status. 1 on, 0 off. Used for MOENCH only ?? {\ttfamily Returns} {\ttfamily }(int)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries pulse \mbox{[}n\mbox{]} \mbox{[}x\mbox{]} \mbox{[}y\mbox{]}} pulses pixel at coordinates (x,y) n number of times. Used in EIGER only. Only put!
+\item {\bfseries pulse \mbox{[}n\mbox{]} \mbox{[}x\mbox{]} \mbox{[}y\mbox{]}} pulses pixel at coordinates (x,y) n number of times. Used in EIGER only. Only put! {\ttfamily Returns} {\ttfamily }(\char`\"{}successful\char`\"{}, \char`\"{}unsuccessful\char`\"{})
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries pulsenmove \mbox{[}n\mbox{]} \mbox{[}x\mbox{]} \mbox{[}y\mbox{]}} pulses pixel n number of times and moves relatively by x value (x axis) and y value(y axis). Used in EIGER only. Only put!
+\item {\bfseries pulsenmove \mbox{[}n\mbox{]} \mbox{[}x\mbox{]} \mbox{[}y\mbox{]}} pulses pixel n number of times and moves relatively by x value (x axis) and y value(y axis). Used in EIGER only. Only put! {\ttfamily Returns} {\ttfamily }(\char`\"{}successful\char`\"{}, \char`\"{}unsuccessful\char`\"{})
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries pulsechip \mbox{[}n\mbox{]}}pulses chip n number of times, while n=-\/1 will reset it to normal mode. Used in EIGER only. Only put!
+\item {\bfseries pulsechip \mbox{[}n\mbox{]}}pulses chip n number of times, while n=-\/1 will reset it to normal mode. Used in EIGER only. Only put! {\ttfamily Returns} {\ttfamily }(\char`\"{}successful\char`\"{}, \char`\"{}unsuccessful\char`\"{})
 \end{DoxyItemize}\hypertarget{config_configversions}{}\subsection{Versions}\label{config_configversions}
 Commands to check versions of each subsystem
 
 
 \begin{DoxyItemize}
-\item {\bfseries moduleversion:\mbox{[}i\mbox{]}} Gets the firmware version of module i. Used for MYTHEN only. Only get!
+\item {\bfseries moduleversion:\mbox{[}i\mbox{]}} Gets the firmware version of module i. Used for MYTHEN only. Only get! {\ttfamily Returns} {\ttfamily }(long int) in hexadecimal or \char`\"{}undefined module number\char`\"{}
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries detectornumber} Gets the serial number or MAC of detector. Only get!
+\item {\bfseries detectornumber} Gets the serial number or MAC of detector. Only get! {\ttfamily Returns} {\ttfamily }(long int) in hexadecimal
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries modulenumber:\mbox{[}i\mbox{]}} Gets the serial number of module i. Used for MYTHEN only. Only get!
+\item {\bfseries modulenumber:\mbox{[}i\mbox{]}} Gets the serial number of module i. Used for MYTHEN only. Only get! {\ttfamily Returns} {\ttfamily }(long int) in hexadecimal or \char`\"{}undefined module number\char`\"{}
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries detectorversion} Gets the firmware version of detector. Only get!
+\item {\bfseries detectorversion} Gets the firmware version of detector. Only get! {\ttfamily Returns} {\ttfamily }(long int) in hexadecimal
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries softwareversion} Gets the software version of detector server. Only get!
+\item {\bfseries softwareversion} Gets the software version of detector server. Only get! {\ttfamily Returns} {\ttfamily }(long int) in hexadecimal
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries thisversion} Gets the software version of this client software. Only get!
+\item {\bfseries thisversion} Gets the software version of this client software. Only get! {\ttfamily Returns} {\ttfamily }(long int) in hexadecimal
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries receiverversion} Gets the software version of receiver. Only get!
+\item {\bfseries receiverversion} Gets the software version of receiver. Only get! {\ttfamily Returns} {\ttfamily }(long int) in hexadecimal
 \end{DoxyItemize}\hypertarget{config_configtimers}{}\subsection{Timers}\label{config_configtimers}
 commands to configure the timers of the detector
 
 
 \begin{DoxyItemize}
-\item {\bfseries timing \mbox{[}mode\mbox{]}} sets/gets synchronization mode of the detector. Mode: auto, trigger, ro\_\-trigger, gating, triggered\_\-gating
+\item {\bfseries timing \mbox{[}mode\mbox{]}} sets/gets synchronization mode of the detector. Mode: auto, trigger, ro\_\-trigger, gating, triggered\_\-gating {\ttfamily Returns} {\ttfamily }(string)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries exptime \mbox{[}i\mbox{]}} sets/gets exposure time in s
+\item {\bfseries exptime \mbox{[}i\mbox{]}} sets/gets exposure time in s. {\ttfamily Returns} {\ttfamily }(double with 9 decimal digits)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries subexptime \mbox{[}i\mbox{]}} sets/gets sub exposure time in s. Used in EIGER only in 32 bit mode.
+\item {\bfseries subexptime \mbox{[}i\mbox{]}} sets/gets sub exposure time in s. Used in EIGER only in 32 bit mode. {\ttfamily Returns} {\ttfamily }(double with 9 decimal digits)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries period \mbox{[}i\mbox{]}} sets/gets frame period in s.
+\item {\bfseries period \mbox{[}i\mbox{]}} sets/gets frame period in s. {\ttfamily Returns} {\ttfamily }(double with 9 decimal digits)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries delay \mbox{[}i\mbox{]}} sets/gets delay in s. Used in MYTHEN, GOTTHARD only
+\item {\bfseries delay \mbox{[}i\mbox{]}} sets/gets delay in s. Used in MYTHEN, GOTTHARD only. {\ttfamily Returns} {\ttfamily }(double with 9 decimal digits)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries gates \mbox{[}i\mbox{]}} sets/gets number of gates. Used in MYTHEN, GOTTHARD, EIGER only
+\item {\bfseries gates \mbox{[}i\mbox{]}} sets/gets number of gates. Used in MYTHEN, GOTTHARD only. {\ttfamily Returns} {\ttfamily }(long long int)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries gates \mbox{[}i\mbox{]}} sets/gets number of frames. If {\ttfamily timing} is not {\ttfamily auto}, then it is the number of frames per cycle/trigger.
+\item {\bfseries frames \mbox{[}i\mbox{]}} sets/gets number of frames. If {\ttfamily timing} is not {\ttfamily auto}, then it is the number of frames per cycle/trigger. {\ttfamily Returns} {\ttfamily }(long long int)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries cycles \mbox{[}i\mbox{]}} sets/gets number of triggers. Timing mode should be set appropriately.
+\item {\bfseries cycles \mbox{[}i\mbox{]}} sets/gets number of triggers. Timing mode should be set appropriately. {\ttfamily Returns} {\ttfamily }(long long int)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries probes \mbox{[}i\mbox{]}} sets/gets number of probes to accumulate. When setting, max 3! cycles should be set to 1, frames to the number of pump-\/probe events. Used in MYTHEN only
+\item {\bfseries probes \mbox{[}i\mbox{]}} sets/gets number of probes to accumulate. When setting, max 3! cycles should be set to 1, frames to the number of pump-\/probe events. Used in MYTHEN only. {\ttfamily Returns} {\ttfamily }(long long int)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries measurements \mbox{[}i\mbox{]}} sets/gets number of measurements.
+\item {\bfseries measurements \mbox{[}i\mbox{]}} sets/gets number of measurements. {\ttfamily Returns} {\ttfamily }(long long int)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries samples \mbox{[}i\mbox{]}} sets/gets number of samples expected from the jctb. Used in CHIP TEST BOARD only.
+\item {\bfseries samples \mbox{[}i\mbox{]}} sets/gets number of samples expected from the jctb. Used in CHIP TEST BOARD only. {\ttfamily Returns} {\ttfamily }(long long int)
 \end{DoxyItemize}\hypertarget{config_configrotimers}{}\subsection{RO Timers}\label{config_configrotimers}
 commands to configure the read only timers of the detector
 
 
 \begin{DoxyItemize}
-\item {\bfseries exptimel} gets exposure time left. Used in MYTHEN, GOTTHARD only. Only get!
+\item {\bfseries exptimel} gets exposure time left. Used in MYTHEN, GOTTHARD only. Only get! {\ttfamily Returns} {\ttfamily }(double with 9 decimal digits)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries periodl} gets frame period left. Used in MYTHEN, GOTTHARD only. Only get!
+\item {\bfseries periodl} gets frame period left. Used in MYTHEN, GOTTHARD only. Only get! {\ttfamily Returns} {\ttfamily }(double with 9 decimal digits)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries delayl} gets delay left. Used in MYTHEN, GOTTHARD only. Only get!
+\item {\bfseries delayl} gets delay left. Used in MYTHEN, GOTTHARD only. Only get! {\ttfamily Returns} {\ttfamily }(double with 9 decimal digits)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries gatesl} gets number of gates left. Used in MYTHEN, GOTTHARD only. Only get!
+\item {\bfseries gatesl} gets number of gates left. Used in MYTHEN, GOTTHARD only. Only get! {\ttfamily Returns} {\ttfamily }(double with 9 decimal digits)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries framesl} gets number of frames left. Used in MYTHEN, GOTTHARD only. Only get!
+\item {\bfseries framesl} gets number of frames left. Used in MYTHEN, GOTTHARD only. Only get! {\ttfamily Returns} {\ttfamily }(double with 9 decimal digits)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries cyclesl} gets number of cylces left. Used in MYTHEN, GOTTHARD only. Only get!
+\item {\bfseries cyclesl} gets number of cylces left. Used in MYTHEN, GOTTHARD only. Only get! {\ttfamily Returns} {\ttfamily }(double with 9 decimal digits)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries probesl} gets number of probes left. Used in MYTHEN, GOTTHARD only. Only get!
+\item {\bfseries probesl} gets number of probes left. Used in MYTHEN, GOTTHARD only. Only get! {\ttfamily Returns} {\ttfamily }(double with 9 decimal digits)
 \end{DoxyItemize}
 
 
@@ -311,86 +311,86 @@ commands to configure speed of detector
 
 
 \begin{DoxyItemize}
-\item {\bfseries clkdivider \mbox{[}i\mbox{]}} sets/gets the readout clock divider. EIGER, JUNGFRAU \mbox{[}0(fast speed), 1(half speed), 2(quarter speed)\mbox{]}. MYTHEN\mbox{[}???\mbox{]}
+\item {\bfseries clkdivider \mbox{[}i\mbox{]}} sets/gets the readout clock divider. EIGER, JUNGFRAU \mbox{[}0(fast speed), 1(half speed), 2(quarter speed)\mbox{]}. MYTHEN\mbox{[}???\mbox{]}. {\ttfamily Returns} {\ttfamily }(int)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries clkdivider \mbox{[}i\mbox{]}} sets/gets length of set/reset signals (in clock cycles). Used in MYTHEN only
+\item {\bfseries clkdivider \mbox{[}i\mbox{]}} sets/gets length of set/reset signals (in clock cycles). Used in MYTHEN only. {\ttfamily Returns} {\ttfamily }(int)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries clkdivider \mbox{[}i\mbox{]}} sets/gets waitstates of the bus interface (in clock cycles). Used in MYTHEN only
+\item {\bfseries clkdivider \mbox{[}i\mbox{]}} sets/gets waitstates of the bus interface (in clock cycles). Used in MYTHEN only. {\ttfamily Returns} {\ttfamily }(int)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries clkdivider \mbox{[}i\mbox{]}} sets/gets clock divider in tot mode. Used in MYTHEN only
+\item {\bfseries clkdivider \mbox{[}i\mbox{]}} sets/gets clock divider in tot mode. Used in MYTHEN only. {\ttfamily Returns} {\ttfamily }(int)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries clkdivider \mbox{[}i\mbox{]}} sets/gets duty cycle of the tot clock. Used in MYTHEN only
+\item {\bfseries clkdivider \mbox{[}i\mbox{]}} sets/gets duty cycle of the tot clock. Used in MYTHEN only. {\ttfamily Returns} {\ttfamily }(int)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries phasestep \mbox{[}i\mbox{]}} ???
+\item {\bfseries phasestep \mbox{[}i\mbox{]}} ???. {\ttfamily Returns} {\ttfamily }(int)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries oversampling \mbox{[}i\mbox{]}} ???
+\item {\bfseries oversampling \mbox{[}i\mbox{]}} ???. {\ttfamily Returns} {\ttfamily }(int)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries adcclk \mbox{[}i\mbox{]}} ???
+\item {\bfseries adcclk \mbox{[}i\mbox{]}} ???. {\ttfamily Returns} {\ttfamily }(int)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries adcphase \mbox{[}i\mbox{]}} ??? Used in MYTHEN, JUNGFRAU only.
+\item {\bfseries adcphase \mbox{[}i\mbox{]}} ??? Used in MYTHEN, JUNGFRAU only. {\ttfamily Returns} {\ttfamily }(int)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries adcpipeline \mbox{[}i\mbox{]}} ???
+\item {\bfseries adcpipeline \mbox{[}i\mbox{]}} ??? {\ttfamily Returns} {\ttfamily }(int)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries dbitclk \mbox{[}i\mbox{]}} ???
+\item {\bfseries dbitclk \mbox{[}i\mbox{]}} ??? {\ttfamily Returns} {\ttfamily }(int)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries dbitphase \mbox{[}i\mbox{]}} ???
+\item {\bfseries dbitphase \mbox{[}i\mbox{]}} ??? {\ttfamily Returns} {\ttfamily }(int)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries dbitpipeline \mbox{[}i\mbox{]}} ???
+\item {\bfseries dbitpipeline \mbox{[}i\mbox{]}} ??? {\ttfamily Returns} {\ttfamily }(int)
 \end{DoxyItemize}\hypertarget{config_configsettings}{}\subsection{Detector Parameters}\label{config_configsettings}
 commands to configure/retrieve configuration of detector
 
 
 \begin{DoxyItemize}
-\item {\bfseries config \mbox{[}fname\mbox{]}} sets/saves detector/receiver to configuration contained in fname. Same as executing sls\_\-detector\_\-put for every line. Normally a one time operation.
+\item {\bfseries config \mbox{[}fname\mbox{]}} sets/saves detector/receiver to configuration contained in fname. Same as executing sls\_\-detector\_\-put for every line. Normally a one time operation. {\ttfamily Returns} {\ttfamily }(string) fname
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries rx\_\-printconfig} prints the receiver configuration. Only get!
+\item {\bfseries rx\_\-printconfig} prints the receiver configuration. Only get! {\ttfamily Returns} {\ttfamily }(string)
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries parameters \mbox{[}fname\mbox{]}} sets/saves detector parameters contained in fname. Normally once per different measurement.
+\item {\bfseries parameters \mbox{[}fname\mbox{]}} sets/saves detector parameters contained in fname. Normally once per different measurement. {\ttfamily Returns} {\ttfamily }(string) fname
 \end{DoxyItemize}
 
 
 \begin{DoxyItemize}
-\item {\bfseries setup \mbox{[}fname\mbox{]}} sets/saves detector complete setup contained in fname (extensions automatically generated), including trimfiles, ff coefficients etc. 
+\item {\bfseries setup \mbox{[}fname\mbox{]}} sets/saves detector complete setup contained in fname (extensions automatically generated), including trimfiles, ff coefficients etc. {\ttfamily Returns} {\ttfamily }(string) fname 
 \end{DoxyItemize}
\ No newline at end of file
diff --git a/manual/slsDetectorClientDocs/latex/doxygen.sty b/manual/slsDetectorClientDocs/latex/doxygen.sty
index 2ba1c1b0f..3547f240e 100644
--- a/manual/slsDetectorClientDocs/latex/doxygen.sty
+++ b/manual/slsDetectorClientDocs/latex/doxygen.sty
@@ -24,9 +24,9 @@
   \fancyplain{}{\bfseries\thepage}%
 }
 \rfoot[\fancyplain{}{\bfseries\scriptsize%
-  Generated on Thu Aug 17 14:31:37 2017 by Doxygen }]{}
+  Generated on Thu Aug 17 16:24:24 2017 by Doxygen }]{}
 \lfoot[]{\fancyplain{}{\bfseries\scriptsize%
-  Generated on Thu Aug 17 14:31:37 2017 by Doxygen }}
+  Generated on Thu Aug 17 16:24:24 2017 by Doxygen }}
 \cfoot{}
 
 %---------- Internal commands used in this style file ----------------
diff --git a/manual/slsDetectorClientDocs/latex/refman.tex b/manual/slsDetectorClientDocs/latex/refman.tex
index ada982757..84d42b631 100644
--- a/manual/slsDetectorClientDocs/latex/refman.tex
+++ b/manual/slsDetectorClientDocs/latex/refman.tex
@@ -40,7 +40,7 @@
 \vspace*{1cm}
 {\large Generated by Doxygen 1.6.1}\\
 \vspace*{0.5cm}
-{\small Thu Aug 17 14:31:37 2017}\\
+{\small Thu Aug 17 16:24:24 2017}\\
 \end{center}
 \end{titlepage}
 \pagenumbering{roman}