detectors/slsDetectorPackage
25
0
Fork 0
mirror of https://github.com/slsdetectorgroup/slsDetectorPackage.git synced 2025-06-22 01:27:59 +02:00
Code Issues Actions Packages Releases Activity

Dev/remove gotthard i (#1108)

Browse Source 
* slsSupportLib done, at receiver rooting out in implementation

* removed from receiver and client

* removed everywhere except gui, python and client(commands.yaml and Detector.h)

* updated python

* fixed autocomplete to print what the issue is if there is one with ToString when running the autocomplete script to generate fixed.json. updated readme.md in generator folder

* formatting

* removed enums for dacs

* udpating autocomplete and generating commands

* removed gotthard from docs and release notes

* removed dac test

* bug from removing g1

* fixed virtual test for xilinx, was minor. so in this PR

* gui done

* binary in merge fix

* formatting and removing enums

* updated fixed and dump.json

* bash autocomplete

* updated doc on command line generation

* removing increments in dac enums for backward compatibility. Not required

* removed ROI from rxParameters  (only in g1), not needed to be backward compatible

* removed the phase shift option from det server staruip
This commit is contained in:
maliakal_d
2025-03-10 14:24:33 +01:00
committed by GitHub
parent fa504e6675
commit 297c3752e3
103 changed files with 20090 additions and 27262 deletions
Download Patch File Download Diff File Expand all files Collapse all files

40
docs/src/firmware.rst
View File

@ -131,42 +131,6 @@ Program from console
Gotthard I
-----------
Download
^^^^^^^^^^^^^
- detector server corresponding to package in slsDetectorPackage/serverBin
- `pof files <https://github.com/slsdetectorgroup/slsDetectorFirmware>`__
.. _firmware upgrade using blaster for blackfin:
Upgrade
^^^^^^^^
.. warning ::
| Gotthard firmware cannot be upgraded remotely and requires the use of USB-Blaster.
| It is generally updated by us.
#. Download `Altera Quartus software or Quartus programmer <https://fpgasoftware.intel.com/20.1/?edition=standard&platform=linux&product=qprogrammer#tabs-4>`__.
#. Start Quartus programmer, click on Hardware Setup. In the "Currently selected hardware" window, select USB-Blaster.
#. In the Mode combo box, select "Active Serial Programming".
#. Plug the end of your USB-Blaster with the adaptor provided to the connector 'AS config' on the Gotthard board.
#. Click on 'Add file'. Select programming (pof) file provided by us.
#. Check "Program/Configure" and "Verify". Push the start button. Wait until the programming process is finished.
#. In case of error messages, check the polarity of cable (that pin1 corresponds) and that the correct programming connector is selected.
#. Reboot the detector.
Mythen III
-----------
@ -396,7 +360,3 @@ How to get back mtd3 drive remotely (udpating kernel)
more /proc/mtd # verify mtd3 is listed
Last Resort using USB Blaster
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
If none of these steps work, the last resort might be physically upgrading the firmware using a USB blaster, which also requires opening up the detector. Instructions for all the blackfin detectors are the same as the one for :ref:`gotthard firmware upgrade <firmware upgrade using blaster for blackfin>`.