mirror of
https://github.com/slsdetectorgroup/slsDetectorPackage.git
synced 2025-04-20 02:40:03 +02:00
wip
This commit is contained in:
parent
215454d7cc
commit
0afe093afc
@ -998,7 +998,7 @@ int Feb_Control_StartAcquisition() {
|
||||
|
||||
int Feb_Control_StopAcquisition() { return Feb_Control_Reset(); }
|
||||
|
||||
int Feb_Control_SoftwareTrigger() {
|
||||
int Feb_Control_SoftwareTrigger(int block) {
|
||||
if (Feb_Control_activated) {
|
||||
// read exp toggle value
|
||||
unsigned int value = 0;
|
||||
@ -1063,10 +1063,12 @@ int Feb_Control_SoftwareTrigger() {
|
||||
}
|
||||
|
||||
// wait for toggle for exposure to be done
|
||||
while (toggle == prev_toggle) {
|
||||
usleep(5000);
|
||||
toggle = ((value & FEB_REG_STATUS_EXP_TGL_MSK) >>
|
||||
FEB_REG_STATUS_EXP_TGL_OFST);
|
||||
if (block) {
|
||||
while (toggle == prev_toggle) {
|
||||
usleep(5000);
|
||||
toggle = ((value & FEB_REG_STATUS_EXP_TGL_MSK) >>
|
||||
FEB_REG_STATUS_EXP_TGL_OFST);
|
||||
}
|
||||
}
|
||||
}
|
||||
return 1;
|
||||
|
@ -55,7 +55,7 @@ int Feb_Control_PrepareForAcquisition();
|
||||
void Feb_Control_PrintAcquisitionSetup();
|
||||
int Feb_Control_StartAcquisition();
|
||||
int Feb_Control_StopAcquisition();
|
||||
int Feb_Control_SoftwareTrigger();
|
||||
int Feb_Control_SoftwareTrigger(int block);
|
||||
|
||||
// parameters
|
||||
int Feb_Control_SetDynamicRange(unsigned int four_eight_sixteen_or_thirtytwo);
|
||||
|
@ -2404,12 +2404,12 @@ int stopStateMachine() {
|
||||
#endif
|
||||
}
|
||||
|
||||
int softwareTrigger() {
|
||||
int softwareTrigger(int block) {
|
||||
#ifdef VIRTUAL
|
||||
return OK;
|
||||
#else
|
||||
sharedMemory_lockLocalLink();
|
||||
if (!Feb_Control_SoftwareTrigger()) {
|
||||
if (!Feb_Control_SoftwareTrigger(block)) {
|
||||
sharedMemory_unlockLocalLink();
|
||||
return FAIL;
|
||||
}
|
||||
|
@ -360,7 +360,7 @@ int isMaster();
|
||||
int setGainCaps(int caps);
|
||||
int getGainCaps();
|
||||
int setChipStatusRegister(int csr);
|
||||
int setDACS(int* dacs);
|
||||
int setDACS(int *dacs);
|
||||
#endif
|
||||
#if defined(GOTTHARDD) || defined(MYTHEN3D)
|
||||
void setExtSignal(int signalIndex, enum externalSignalFlag mode);
|
||||
@ -576,9 +576,12 @@ int startStateMachine();
|
||||
void *start_timer(void *arg);
|
||||
#endif
|
||||
int stopStateMachine();
|
||||
#if defined(EIGERD) || defined(MYTHEN3D)
|
||||
#ifdef MYTHEN3D
|
||||
int softwareTrigger();
|
||||
#endif
|
||||
#ifdef EIGERD
|
||||
int softwareTrigger(int block);
|
||||
#endif
|
||||
#if defined(EIGERD) || defined(MYTHEN3D)
|
||||
int startReadOut();
|
||||
#endif
|
||||
|
@ -642,9 +642,9 @@ int set_timing_mode(int file_des) {
|
||||
}
|
||||
// get
|
||||
retval = getTiming();
|
||||
#ifndef MYTHEN3D
|
||||
#ifndef MYTHEN3D
|
||||
validate((int)arg, (int)retval, "set timing mode", DEC);
|
||||
#endif
|
||||
#endif
|
||||
LOG(logDEBUG1, ("Timing Mode: %d\n", retval));
|
||||
|
||||
return Server_SendResult(file_des, INT32, &retval, sizeof(retval));
|
||||
@ -1552,7 +1552,7 @@ int set_module(int file_des) {
|
||||
// check index
|
||||
|
||||
#if !(defined(EIGERD) || defined(MYTHEN3D))
|
||||
//TODO! Check if this is used for any detector
|
||||
// TODO! Check if this is used for any detector
|
||||
switch (module.reg) {
|
||||
#ifdef JUNGFRAUD
|
||||
case DYNAMICGAIN:
|
||||
@ -4163,16 +4163,29 @@ int check_version(int file_des) {
|
||||
int software_trigger(int file_des) {
|
||||
ret = OK;
|
||||
memset(mess, 0, sizeof(mess));
|
||||
int arg = -1;
|
||||
|
||||
if (receiveData(file_des, &arg, sizeof(arg), INT32) < 0)
|
||||
return printSocketReadError();
|
||||
LOG(logDEBUG1, ("Software Trigger (block: %d\n", arg));
|
||||
|
||||
LOG(logDEBUG1, ("Software Trigger\n"));
|
||||
#if !defined(EIGERD) && !defined(MYTHEN3D)
|
||||
functionNotImplemented();
|
||||
#else
|
||||
if (arg && myDetectorType == MYTHEN3) {
|
||||
ret = FAIL;
|
||||
strcpy(mess, "Blocking trigger not implemented for Mythen3. Please use non blocking trigger.\n");
|
||||
LOG(logERROR, (mess));
|
||||
}
|
||||
// only set
|
||||
if (Server_VerifyLock() == OK) {
|
||||
else if (Server_VerifyLock() == OK) {
|
||||
#ifdef MYTHEN3
|
||||
ret = softwareTrigger();
|
||||
#else
|
||||
ret = softwareTrigger(arg);
|
||||
#endif
|
||||
if (ret == FAIL) {
|
||||
sprintf(mess, "Could not send software trigger\n");
|
||||
strcpy(mess, "Could not send software trigger\n");
|
||||
LOG(logERROR, (mess));
|
||||
}
|
||||
LOG(logDEBUG1, ("Software trigger successful\n"));
|
||||
@ -7576,7 +7589,7 @@ int set_pattern(int file_des) {
|
||||
|
||||
patternParameters *pat = malloc(sizeof(patternParameters));
|
||||
memset(pat, 0, sizeof(patternParameters));
|
||||
// ignoring endianness for eiger
|
||||
// ignoring endianness for eiger
|
||||
if (receiveData(file_des, pat, sizeof(patternParameters), INT32) < 0) {
|
||||
if (pat != NULL)
|
||||
free(pat);
|
||||
@ -7587,10 +7600,12 @@ int set_pattern(int file_des) {
|
||||
LOG(logINFO, ("Setting Pattern from structure\n"));
|
||||
LOG(logINFO,
|
||||
("Setting Pattern Word (printing every 10 words that are not 0\n"));
|
||||
/****************************************************************************************************************/
|
||||
/* I SUGGEST TO VALIDATE THE VALUES HERE AND THEN WRITE THE PATTERN IN A SEPARATE FUNCTION WHICH COULD BE REUSED*/
|
||||
/* added loadPattern.c/h - the same func could be reused also in readDefaultPattern */
|
||||
/***************************************************************************************************************/
|
||||
/****************************************************************************************************************/
|
||||
/* I SUGGEST TO VALIDATE THE VALUES HERE AND THEN WRITE THE PATTERN IN A
|
||||
* SEPARATE FUNCTION WHICH COULD BE REUSED*/
|
||||
/* added loadPattern.c/h - the same func could be reused also in
|
||||
* readDefaultPattern */
|
||||
/***************************************************************************************************************/
|
||||
|
||||
for (int i = 0; i < MAX_PATTERN_LENGTH; ++i) {
|
||||
if ((i % 10 == 0) && pat->word[i] != 0) {
|
||||
@ -7664,7 +7679,7 @@ int set_pattern(int file_des) {
|
||||
}
|
||||
}
|
||||
}
|
||||
/******* DOWN TO HERE ***********/
|
||||
/******* DOWN TO HERE ***********/
|
||||
}
|
||||
if (pat != NULL)
|
||||
free(pat);
|
||||
@ -8372,7 +8387,7 @@ int get_all_threshold_energy(int file_des) {
|
||||
return Server_SendResult(file_des, INT32, retvals, sizeof(retvals));
|
||||
}
|
||||
|
||||
int get_master(int file_des){
|
||||
int get_master(int file_des) {
|
||||
ret = OK;
|
||||
memset(mess, 0, sizeof(mess));
|
||||
int retval = -1;
|
||||
@ -8387,7 +8402,7 @@ int get_master(int file_des){
|
||||
return Server_SendResult(file_des, INT32, &retval, sizeof(retval));
|
||||
}
|
||||
|
||||
int get_csr(int file_des){
|
||||
int get_csr(int file_des) {
|
||||
ret = OK;
|
||||
memset(mess, 0, sizeof(mess));
|
||||
int retval = -1;
|
||||
@ -8402,7 +8417,7 @@ int get_csr(int file_des){
|
||||
return Server_SendResult(file_des, INT32, &retval, sizeof(retval));
|
||||
}
|
||||
|
||||
int set_gain_caps(int file_des){
|
||||
int set_gain_caps(int file_des) {
|
||||
ret = OK;
|
||||
memset(mess, 0, sizeof(mess));
|
||||
int arg = 0;
|
||||
@ -8418,14 +8433,14 @@ int set_gain_caps(int file_des){
|
||||
#else
|
||||
if (Server_VerifyLock() == OK) {
|
||||
setGainCaps(arg);
|
||||
retval = getChipStatusRegister(); //TODO! fix
|
||||
retval = getChipStatusRegister(); // TODO! fix
|
||||
LOG(logDEBUG1, ("gain caps retval: %u\n", retval));
|
||||
}
|
||||
#endif
|
||||
return Server_SendResult(file_des, INT32, &retval, sizeof(retval));
|
||||
}
|
||||
|
||||
int get_gain_caps(int file_des){
|
||||
int get_gain_caps(int file_des) {
|
||||
ret = OK;
|
||||
memset(mess, 0, sizeof(mess));
|
||||
// int arg = 0;
|
||||
|
@ -520,8 +520,10 @@ class Detector {
|
||||
* numbers for different modules.*/
|
||||
void setNextFrameNumber(uint64_t value, Positions pos = {});
|
||||
|
||||
/** [Eiger][Mythen3] Sends an internal software trigger to the detector */
|
||||
void sendSoftwareTrigger(Positions pos = {});
|
||||
/** [Eiger][Mythen3] Sends an internal software trigger to the detector
|
||||
* block true if command blocks till frames are sent out from that trigger
|
||||
*/
|
||||
void sendSoftwareTrigger(const bool block = false, Positions pos = {});
|
||||
|
||||
Result<defs::scanParameters> getScan(Positions pos = {}) const;
|
||||
|
||||
@ -1308,8 +1310,7 @@ class Detector {
|
||||
|
||||
Result<bool> getMaster(Positions pos = {}) const;
|
||||
|
||||
|
||||
//TODO! check if we really want to expose this !!!!!
|
||||
// TODO! check if we really want to expose this !!!!!
|
||||
Result<int> getChipStatusRegister(Positions pos = {}) const;
|
||||
|
||||
void setGainCaps(int caps, Positions pos = {});
|
||||
|
@ -1193,6 +1193,41 @@ std::string CmdProxy::Scan(int action) {
|
||||
return os.str();
|
||||
}
|
||||
|
||||
std::string CmdProxy::Trigger(int action) {
|
||||
std::ostringstream os;
|
||||
os << cmd << ' ';
|
||||
if (action == defs::HELP_ACTION) {
|
||||
if (cmd == "trigger") {
|
||||
os << "[Eiger][Mythen3] Sends software trigger signal to detector";
|
||||
} else if (cmd == "blockingtrigger") {
|
||||
os << "[Eiger] Sends software trigger signal to detector and "
|
||||
"blocks till "
|
||||
"the frames are sent out for that trigger.";
|
||||
} else {
|
||||
throw sls::RuntimeError("unknown command " + cmd);
|
||||
}
|
||||
os << '\n';
|
||||
} else if (action == slsDetectorDefs::GET_ACTION) {
|
||||
throw sls::RuntimeError("Cannot get");
|
||||
} else if (action == slsDetectorDefs::PUT_ACTION) {
|
||||
if (det_id != -1) {
|
||||
throw sls::RuntimeError("Cannot execute this at module level");
|
||||
}
|
||||
if (!args.empty()) {
|
||||
WrongNumberOfParameters(0);
|
||||
}
|
||||
bool block = false;
|
||||
if (cmd == "blockingtrigger") {
|
||||
block = true;
|
||||
}
|
||||
det->sendSoftwareTrigger(block);
|
||||
os << "successful\n";
|
||||
} else {
|
||||
throw sls::RuntimeError("Unknown action");
|
||||
}
|
||||
return os.str();
|
||||
}
|
||||
|
||||
/* Network Configuration (Detector<->Receiver) */
|
||||
|
||||
std::string CmdProxy::UDPDestinationIP(int action) {
|
||||
@ -1981,12 +2016,12 @@ std::string CmdProxy::GateDelay(int action) {
|
||||
return os.str();
|
||||
}
|
||||
|
||||
|
||||
std::string CmdProxy::GainCaps(int action){
|
||||
std::string CmdProxy::GainCaps(int action) {
|
||||
std::ostringstream os;
|
||||
os << cmd << ' ';
|
||||
if (action == defs::HELP_ACTION) {
|
||||
os << "[cap1, cap2, ...]\n\t[Mythen3] gain, options: C10pre, C15sh, C30sh, C50sh, C225ACsh, C15pre"
|
||||
os << "[cap1, cap2, ...]\n\t[Mythen3] gain, options: C10pre, C15sh, "
|
||||
"C30sh, C50sh, C225ACsh, C15pre"
|
||||
<< '\n';
|
||||
} else if (action == defs::GET_ACTION) {
|
||||
if (!args.empty())
|
||||
@ -1994,7 +2029,7 @@ std::string CmdProxy::GainCaps(int action){
|
||||
|
||||
auto tmp = det->getGainCaps();
|
||||
sls::Result<defs::M3_GainCaps> csr;
|
||||
for (auto val : tmp){
|
||||
for (auto val : tmp) {
|
||||
if (val)
|
||||
csr.push_back(static_cast<defs::M3_GainCaps>(val));
|
||||
}
|
||||
@ -2005,7 +2040,7 @@ std::string CmdProxy::GainCaps(int action){
|
||||
WrongNumberOfParameters(1);
|
||||
}
|
||||
int caps = 0;
|
||||
for (const auto& arg:args){
|
||||
for (const auto &arg : args) {
|
||||
if (arg != "0")
|
||||
caps |= sls::StringTo<defs::M3_GainCaps>(arg);
|
||||
}
|
||||
|
@ -571,7 +571,6 @@ class CmdProxy {
|
||||
return ToString(value, unit);
|
||||
}
|
||||
|
||||
|
||||
using FunctionMap = std::map<std::string, std::string (CmdProxy::*)(int)>;
|
||||
using StringMap = std::map<std::string, std::string>;
|
||||
|
||||
@ -839,7 +838,7 @@ class CmdProxy {
|
||||
{"rx_framescaught", &CmdProxy::rx_framescaught},
|
||||
{"rx_missingpackets", &CmdProxy::rx_missingpackets},
|
||||
{"nextframenumber", &CmdProxy::nextframenumber},
|
||||
{"trigger", &CmdProxy::trigger},
|
||||
{"trigger", &CmdProxy::Trigger},
|
||||
{"scan", &CmdProxy::Scan},
|
||||
{"scanerrmsg", &CmdProxy::scanerrmsg},
|
||||
|
||||
@ -900,6 +899,7 @@ class CmdProxy {
|
||||
{"rx_zmqhwm", &CmdProxy::rx_zmqhwm},
|
||||
|
||||
/* Eiger Specific */
|
||||
{"blockingtrigger", &CmdProxy::Trigger},
|
||||
{"subexptime", &CmdProxy::subexptime},
|
||||
{"subdeadtime", &CmdProxy::subdeadtime},
|
||||
{"overflow", &CmdProxy::overflow},
|
||||
@ -1094,6 +1094,7 @@ class CmdProxy {
|
||||
std::string ReceiverStatus(int action);
|
||||
std::string DetectorStatus(int action);
|
||||
std::string Scan(int action);
|
||||
std::string Trigger(int action);
|
||||
/* Network Configuration (Detector<->Receiver) */
|
||||
std::string UDPDestinationIP(int action);
|
||||
std::string UDPDestinationIP2(int action);
|
||||
@ -1445,8 +1446,8 @@ class CmdProxy {
|
||||
"and automatically returns to idle at the end of readout.");
|
||||
|
||||
EXECUTE_SET_COMMAND(stop, stopDetector,
|
||||
"\n\tAbort detector acquisition. Status changes "
|
||||
"to IDLE or STOPPED. Goes to stop server.");
|
||||
"\n\tAbort detector acquisition. Status changes "
|
||||
"to IDLE or STOPPED. Goes to stop server.");
|
||||
|
||||
GET_COMMAND(rx_framescaught, getFramesCaught,
|
||||
"\n\tNumber of frames caught by receiver.");
|
||||
@ -1460,10 +1461,6 @@ class CmdProxy {
|
||||
"Stopping acquisition might result in "
|
||||
"different frame numbers for different modules.");
|
||||
|
||||
EXECUTE_SET_COMMAND(
|
||||
trigger, sendSoftwareTrigger,
|
||||
"\n\t[Eiger][Mythen3] Sends software trigger signal to detector.");
|
||||
|
||||
GET_COMMAND(scanerrmsg, getScanErrorMessage,
|
||||
"\n\tGets Scan error message if scan ended in error for non "
|
||||
"blocking acquisitions.");
|
||||
|
@ -675,11 +675,11 @@ void Detector::stopReceiver() { pimpl->Parallel(&Module::stopReceiver, {}); }
|
||||
|
||||
void Detector::startDetector() {
|
||||
auto detector_type = getDetectorType().squash();
|
||||
if (detector_type == defs::MYTHEN3 && size() > 1){
|
||||
if (detector_type == defs::MYTHEN3 && size() > 1) {
|
||||
auto is_master = getMaster();
|
||||
std::vector<int> master;
|
||||
std::vector<int> slaves;
|
||||
for(int i=0; i<size(); ++i){
|
||||
for (int i = 0; i < size(); ++i) {
|
||||
if (is_master[i])
|
||||
master.push_back(i);
|
||||
else
|
||||
@ -687,17 +687,18 @@ void Detector::startDetector() {
|
||||
}
|
||||
pimpl->Parallel(&Module::startAcquisition, slaves);
|
||||
pimpl->Parallel(&Module::startAcquisition, master);
|
||||
}else{
|
||||
} else {
|
||||
pimpl->Parallel(&Module::startAcquisition, {});
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
void Detector::startDetectorReadout() {
|
||||
pimpl->Parallel(&Module::startReadout, {});
|
||||
}
|
||||
|
||||
void Detector::stopDetector(Positions pos) { pimpl->Parallel(&Module::stopAcquisition, pos); }
|
||||
void Detector::stopDetector(Positions pos) {
|
||||
pimpl->Parallel(&Module::stopAcquisition, pos);
|
||||
}
|
||||
|
||||
Result<defs::runStatus> Detector::getDetectorStatus(Positions pos) const {
|
||||
return pimpl->Parallel(&Module::getRunStatus, pos);
|
||||
@ -724,8 +725,8 @@ void Detector::setNextFrameNumber(uint64_t value, Positions pos) {
|
||||
pimpl->Parallel(&Module::setNextFrameNumber, pos, value);
|
||||
}
|
||||
|
||||
void Detector::sendSoftwareTrigger(Positions pos) {
|
||||
pimpl->Parallel(&Module::sendSoftwareTrigger, pos);
|
||||
void Detector::sendSoftwareTrigger(const bool block, Positions pos) {
|
||||
pimpl->Parallel(&Module::sendSoftwareTrigger, pos, false);
|
||||
}
|
||||
|
||||
Result<defs::scanParameters> Detector::getScan(Positions pos) const {
|
||||
@ -733,8 +734,10 @@ Result<defs::scanParameters> Detector::getScan(Positions pos) const {
|
||||
}
|
||||
|
||||
void Detector::setScan(const defs::scanParameters t) {
|
||||
if(getDetectorType().squash() == defs::MYTHEN3 && size()>1 && t.enable != 0){
|
||||
throw DetectorError("Scan is only allowed for single module Mythen 3 because of synchronization");
|
||||
if (getDetectorType().squash() == defs::MYTHEN3 && size() > 1 &&
|
||||
t.enable != 0) {
|
||||
throw DetectorError("Scan is only allowed for single module Mythen 3 "
|
||||
"because of synchronization");
|
||||
}
|
||||
pimpl->Parallel(&Module::setScan, {}, t);
|
||||
}
|
||||
@ -1611,23 +1614,22 @@ Detector::getGateDelayForAllGates(Positions pos) const {
|
||||
return pimpl->Parallel(&Module::getGateDelayForAllGates, pos);
|
||||
}
|
||||
|
||||
Result<bool> Detector::getMaster(Positions pos) const{
|
||||
Result<bool> Detector::getMaster(Positions pos) const {
|
||||
return pimpl->Parallel(&Module::isMaster, pos);
|
||||
}
|
||||
|
||||
Result<int> Detector::getChipStatusRegister(Positions pos) const{
|
||||
Result<int> Detector::getChipStatusRegister(Positions pos) const {
|
||||
return pimpl->Parallel(&Module::getChipStatusRegister, pos);
|
||||
}
|
||||
|
||||
void Detector::setGainCaps(int caps, Positions pos){
|
||||
void Detector::setGainCaps(int caps, Positions pos) {
|
||||
return pimpl->Parallel(&Module::setGainCaps, pos, caps);
|
||||
}
|
||||
|
||||
Result<int> Detector::getGainCaps(Positions pos){
|
||||
Result<int> Detector::getGainCaps(Positions pos) {
|
||||
return pimpl->Parallel(&Module::getGainCaps, pos);
|
||||
}
|
||||
|
||||
|
||||
// CTB/ Moench Specific
|
||||
|
||||
Result<int> Detector::getNumberOfAnalogSamples(Positions pos) const {
|
||||
|
@ -352,37 +352,39 @@ void Module::setAllThresholdEnergy(std::array<int, 3> e_eV,
|
||||
std::copy(e_eV.begin(), e_eV.end(), myMod.eV);
|
||||
LOG(logDEBUG) << "ev:" << ToString(myMod.eV);
|
||||
|
||||
//check for trimbits that are out of range
|
||||
// check for trimbits that are out of range
|
||||
bool out_of_range = false;
|
||||
for(int i = 0; i!=myMod.nchan; ++i){
|
||||
if (myMod.chanregs[i]<0){
|
||||
for (int i = 0; i != myMod.nchan; ++i) {
|
||||
if (myMod.chanregs[i] < 0) {
|
||||
myMod.chanregs[i] = 0;
|
||||
out_of_range = true;
|
||||
}else if(myMod.chanregs[i]>63){
|
||||
myMod.chanregs[i]=63;
|
||||
} else if (myMod.chanregs[i] > 63) {
|
||||
myMod.chanregs[i] = 63;
|
||||
out_of_range = true;
|
||||
}
|
||||
}
|
||||
if (out_of_range){
|
||||
LOG(logWARNING) << "Some trimbits were out of range after interpolation, these have been replaced with 0 or 63.";
|
||||
if (out_of_range) {
|
||||
LOG(logWARNING)
|
||||
<< "Some trimbits were out of range after interpolation, these "
|
||||
"have been replaced with 0 or 63.";
|
||||
}
|
||||
|
||||
//check dacs
|
||||
// check dacs
|
||||
out_of_range = false;
|
||||
for (auto dac : {M_VTRIM,M_VTH1,M_VTH2, M_VTH3}){
|
||||
if (myMod.dacs[dac] < 600){
|
||||
for (auto dac : {M_VTRIM, M_VTH1, M_VTH2, M_VTH3}) {
|
||||
if (myMod.dacs[dac] < 600) {
|
||||
myMod.dacs[dac] = 600;
|
||||
out_of_range = true;
|
||||
}else if(myMod.dacs[dac] > 2400){
|
||||
} else if (myMod.dacs[dac] > 2400) {
|
||||
myMod.dacs[dac] = 2400;
|
||||
out_of_range = true;
|
||||
}
|
||||
}
|
||||
if (out_of_range){
|
||||
LOG(logWARNING) << "Some dacs were out of range after interpolation, these have been replaced with 600 or 2400.";
|
||||
if (out_of_range) {
|
||||
LOG(logWARNING) << "Some dacs were out of range after interpolation, "
|
||||
"these have been replaced with 600 or 2400.";
|
||||
}
|
||||
|
||||
|
||||
setModule(myMod, trimbits);
|
||||
if (getSettings() != isettings) {
|
||||
throw RuntimeError("setThresholdEnergyAndSettings: Could not set "
|
||||
@ -412,7 +414,8 @@ void Module::loadSettingsFile(const std::string &fname) {
|
||||
if (shm()->myDetectorType == MYTHEN3) {
|
||||
serialNumberWidth = 4;
|
||||
}
|
||||
if ((fname.find(".sn") == std::string::npos) && (fname.find(".trim") == std::string::npos)) {
|
||||
if ((fname.find(".sn") == std::string::npos) &&
|
||||
(fname.find(".trim") == std::string::npos)) {
|
||||
ostfn << ".sn" << std::setfill('0') << std::setw(serialNumberWidth)
|
||||
<< std::dec << getSerialNumber();
|
||||
}
|
||||
@ -773,7 +776,9 @@ void Module::setNextFrameNumber(uint64_t value) {
|
||||
sendToDetector(F_SET_NEXT_FRAME_NUMBER, value, nullptr);
|
||||
}
|
||||
|
||||
void Module::sendSoftwareTrigger() { sendToDetectorStop(F_SOFTWARE_TRIGGER); }
|
||||
void Module::sendSoftwareTrigger(const bool block) {
|
||||
sendToDetectorStop(F_SOFTWARE_TRIGGER, static_cast<int>(block), nullptr);
|
||||
}
|
||||
|
||||
defs::scanParameters Module::getScan() const {
|
||||
return sendToDetector<defs::scanParameters>(F_GET_SCAN);
|
||||
@ -1994,21 +1999,17 @@ std::array<time::ns, 3> Module::getGateDelayForAllGates() const {
|
||||
return sendToDetector<std::array<time::ns, 3>>(F_GET_GATE_DELAY_ALL_GATES);
|
||||
}
|
||||
|
||||
bool Module::isMaster() const{
|
||||
return sendToDetector<int>(F_GET_MASTER);
|
||||
}
|
||||
bool Module::isMaster() const { return sendToDetector<int>(F_GET_MASTER); }
|
||||
|
||||
int Module::getChipStatusRegister() const{
|
||||
int Module::getChipStatusRegister() const {
|
||||
return sendToDetector<int>(F_GET_CSR);
|
||||
}
|
||||
|
||||
void Module::setGainCaps(int caps){
|
||||
void Module::setGainCaps(int caps) {
|
||||
sendToDetector<int>(F_SET_GAIN_CAPS, caps);
|
||||
}
|
||||
|
||||
int Module::getGainCaps(){
|
||||
return sendToDetector<int>(F_GET_GAIN_CAPS);
|
||||
}
|
||||
int Module::getGainCaps() { return sendToDetector<int>(F_GET_GAIN_CAPS); }
|
||||
|
||||
// CTB / Moench Specific
|
||||
int Module::getNumberOfAnalogSamples() const {
|
||||
@ -3209,7 +3210,6 @@ sls_detector_module Module::readSettingsFile(const std::string &fname,
|
||||
|
||||
auto file_size = getFileSize(infile);
|
||||
|
||||
|
||||
// eiger
|
||||
if (shm()->myDetectorType == EIGER) {
|
||||
infile.read(reinterpret_cast<char *>(myMod.dacs),
|
||||
@ -3235,16 +3235,15 @@ sls_detector_module Module::readSettingsFile(const std::string &fname,
|
||||
|
||||
// mythen3 (dacs, trimbits)
|
||||
else if (shm()->myDetectorType == MYTHEN3) {
|
||||
int expected_size =
|
||||
sizeof(int) * myMod.ndac + sizeof(int) * myMod.nchan + sizeof(myMod.reg);
|
||||
int expected_size = sizeof(int) * myMod.ndac +
|
||||
sizeof(int) * myMod.nchan + sizeof(myMod.reg);
|
||||
if (file_size != expected_size) {
|
||||
throw RuntimeError("The size of the settings file: " + fname +
|
||||
" differs from the expected size, " +
|
||||
std::to_string(file_size) + " instead of " +
|
||||
std::to_string(expected_size) + " bytes");
|
||||
}
|
||||
infile.read(reinterpret_cast<char *>(&myMod.reg),
|
||||
sizeof(myMod.reg));
|
||||
infile.read(reinterpret_cast<char *>(&myMod.reg), sizeof(myMod.reg));
|
||||
infile.read(reinterpret_cast<char *>(myMod.dacs),
|
||||
sizeof(int) * (myMod.ndac));
|
||||
for (int i = 0; i < myMod.ndac; ++i) {
|
||||
|
@ -185,7 +185,7 @@ class Module : public virtual slsDetectorDefs {
|
||||
std::vector<uint64_t> getNumMissingPackets() const;
|
||||
uint64_t getNextFrameNumber() const;
|
||||
void setNextFrameNumber(uint64_t value);
|
||||
void sendSoftwareTrigger();
|
||||
void sendSoftwareTrigger(const bool block);
|
||||
defs::scanParameters getScan() const;
|
||||
void setScan(const defs::scanParameters t);
|
||||
std::string getScanErrorMessage() const;
|
||||
|
@ -1446,6 +1446,45 @@ TEST_CASE("trigger", "[.cmd]") {
|
||||
}
|
||||
}
|
||||
|
||||
TEST_CASE("blockingtrigger", "[.cmd]") {
|
||||
Detector det;
|
||||
CmdProxy proxy(&det);
|
||||
REQUIRE_THROWS(proxy.Call("blockingtrigger", {}, -1, GET));
|
||||
auto det_type = det.getDetectorType().squash();
|
||||
if (det_type != defs::EIGER) {
|
||||
REQUIRE_THROWS(proxy.Call("blockingtrigger", {}, -1, PUT));
|
||||
} else if (det_type == defs::EIGER) {
|
||||
auto prev_timing =
|
||||
det.getTimingMode().tsquash("inconsistent timing mode in test");
|
||||
auto prev_frames =
|
||||
det.getNumberOfFrames().tsquash("inconsistent #frames in test");
|
||||
auto prev_exptime =
|
||||
det.getExptime().tsquash("inconsistent exptime in test");
|
||||
auto prev_period =
|
||||
det.getPeriod().tsquash("inconsistent period in test");
|
||||
det.setTimingMode(defs::TRIGGER_EXPOSURE);
|
||||
det.setNumberOfFrames(1);
|
||||
det.setExptime(std::chrono::microseconds(200));
|
||||
det.setPeriod(std::chrono::milliseconds(1));
|
||||
auto nextframenumber =
|
||||
det.getNextFrameNumber().tsquash("inconsistent frame nr in test");
|
||||
det.startDetector();
|
||||
{
|
||||
std::ostringstream oss;
|
||||
proxy.Call("blockingtrigger", {}, -1, PUT, oss);
|
||||
REQUIRE(oss.str() == "blockingtrigger successful\n");
|
||||
}
|
||||
auto currentfnum =
|
||||
det.getNextFrameNumber().tsquash("inconsistent frame nr in test");
|
||||
REQUIRE(nextframenumber + 1 == currentfnum);
|
||||
det.stopDetector();
|
||||
det.setTimingMode(prev_timing);
|
||||
det.setNumberOfFrames(prev_frames);
|
||||
det.setExptime(prev_exptime);
|
||||
det.setPeriod(prev_period);
|
||||
}
|
||||
}
|
||||
|
||||
TEST_CASE("clearbusy", "[.cmd]") {
|
||||
Detector det;
|
||||
CmdProxy proxy(&det);
|
||||
|
Loading…
x
Reference in New Issue
Block a user