marcarulla
05d0c2d44b
1.New files: a. Fits for a given module, column, and row: i) BP_fit.cpp ii) BP_fit_M431.cpp iii) BP_fit_thin.cpp (use a different scan as the standard module) iv) CS_fit.cpp v) CuFluo_fit.cpp b. Calibration bash files: i) BP_scan_both_speed.sh ii) CS_scan_both_speed.sh iii) CuFluo_exposure_both_speed.sh v) BP_scan_thinSensor.sh (use a different scan than the standard one) c. Analysis: i) CS_analysis_M431.cpp ii) CS_analysis_M439.cpp ii) BP_analysis_thinSensor.cpp d) Default pixels map for JF systems i) Default_pixels_array.cpp (gives 3 bin files with the default pixels of the JF system at G0, G1, G2, HG0, view from the front side) 2. Changes a. Calibration bash files - BP_scan_JF11.sh (changed pc of the wave generator) - CuFluo_exposure.sh (increase frames) - filename_creator.sh ( defined parameter DSTIP to source it from any receiver pc. The pccalib.sh has to be sourced before) b. Analysis - BP_analysis.cpp ( avoid abort of the analysis due to empty fits in the plotting of the ADU versus mV for the defined pixels ) - CS_analysis.cpp c. Run_JFCalibration.txt
187 lines
3.8 KiB
Bash
187 lines
3.8 KiB
Bash
#!/bin/bash
|
|
|
|
# to run do: bash CS_scan.sh
|
|
|
|
# prerequisites:
|
|
# - setup_env.sh souced
|
|
# - the hostname is set
|
|
# - detector is on
|
|
# - fileneame script has been sourced
|
|
# - source pccalib.sh [pc] (pc-jungfrau-01/pc-jungfrau-02/pc-jungfrau-test)
|
|
# last file should have exactly 4194368000 byte in it.
|
|
|
|
|
|
|
|
KILLRCV="killall ju_udp_receiver_3threads_2_0"
|
|
$KILLRCV
|
|
|
|
sls_detector_put stop #just in case
|
|
sls_detector_put powerchip 1
|
|
|
|
|
|
|
|
sls_detector_put frames 640
|
|
sls_detector_put period 0.005
|
|
sls_detector_put exptime 0.000010
|
|
sls_detector_put highvoltage 200 #200
|
|
|
|
# configure for receiver on pc-jungfrau-01/pc-jungfrau-02/pc-jungfrau-test
|
|
# source pccalib.sh [pc] (pc-jungfrau-01/pc-jungfrau-02/pc-jungfrau-test)
|
|
sls_detector_put udp_dstport 32410
|
|
sls_detector_put udp_dstip $DSTIP #10.1.4.105
|
|
sls_detector_put udp_dstmac $DSTMAC #3C:FD:FE:A2:14:D8
|
|
sls_detector_put udp_srcip $SRCIP #10.1.4.9
|
|
sls_detector_put udp_srcmac 00:ab:be:cc:dd:e2
|
|
|
|
sls_detector_put readoutspeed half_speed
|
|
#sls_detector_put readoutspeed full_speed
|
|
#sls_detector_put dbitphase 125
|
|
|
|
sleep 3
|
|
|
|
sls_detector_put frames 10000
|
|
sls_detector_put start
|
|
sleep 70
|
|
sls_detector_put stop
|
|
sls_detector_put frames 640
|
|
|
|
$TKCSG0 &
|
|
sleep 3
|
|
|
|
echo "recording G0 pede"
|
|
sls_detector_put start
|
|
sleep 4
|
|
|
|
|
|
echo "recording G1 pede"
|
|
sls_detector_put gainmode forceswitchg1
|
|
sls_detector_put start
|
|
sleep 4
|
|
|
|
|
|
echo "recording G2 pede"
|
|
sls_detector_put gainmode forceswitchg2
|
|
sls_detector_put start
|
|
sleep 4
|
|
|
|
|
|
sls_detector_put gainmode dynamic
|
|
|
|
|
|
# turn on current source
|
|
# bit 16 high bit 17 low = automatic cal col sweep
|
|
# bit 16 high bit 17 high = cal col selected with bits 26-20
|
|
sls_detector_put currentsource 1 nofix 0
|
|
|
|
sleep 1
|
|
|
|
|
|
# loop 1
|
|
for tint in {50..450..50} # 25 is too small here, 50 min
|
|
do
|
|
tint_sec=$(printf %.9f $(echo "$tint/1000000000" | bc -l))
|
|
echo "setting integration time to (s) " $tint_sec
|
|
sls_detector_put exptime $tint_sec
|
|
sls_detector_put start
|
|
sleep 4
|
|
done
|
|
|
|
|
|
# loop 2a
|
|
for tint in {50..100..5}
|
|
do
|
|
tint_sec=$(printf %.8f $(echo "$tint/100000000" | bc -l))
|
|
echo "setting integration time to (s) " $tint_sec
|
|
sls_detector_put exptime $tint_sec
|
|
sls_detector_put start
|
|
sleep 4
|
|
done
|
|
|
|
|
|
# loop 2b
|
|
for tint in {110..200..10}
|
|
do
|
|
tint_sec=$(printf %.8f $(echo "$tint/100000000" | bc -l))
|
|
echo "setting integration time to (s) " $tint_sec
|
|
sls_detector_put exptime $tint_sec
|
|
sls_detector_put start
|
|
sleep 4
|
|
done
|
|
|
|
|
|
# loop 2c
|
|
for tint in {225..450..25}
|
|
do
|
|
tint_sec=$(printf %.8f $(echo "$tint/100000000" | bc -l))
|
|
echo "setting integration time to (s) " $tint_sec
|
|
sls_detector_put exptime $tint_sec
|
|
sls_detector_put start
|
|
sleep 4
|
|
done
|
|
|
|
|
|
# loop 3a
|
|
for tint in {50..100..5}
|
|
do
|
|
tint_sec=$(printf %.7f $(echo "$tint/10000000" | bc -l))
|
|
echo "setting integration time to (s) " $tint_sec
|
|
sls_detector_put exptime $tint_sec
|
|
sls_detector_put start
|
|
sleep 4
|
|
done
|
|
|
|
|
|
# loop 3b
|
|
for tint in {110..200..10}
|
|
do
|
|
tint_sec=$(printf %.7f $(echo "$tint/10000000" | bc -l))
|
|
echo "setting integration time to (s) " $tint_sec
|
|
sls_detector_put exptime $tint_sec
|
|
sls_detector_put start
|
|
sleep 4
|
|
done
|
|
|
|
|
|
# loop 3c
|
|
for tint in {225..450..25}
|
|
do
|
|
tint_sec=$(printf %.7f $(echo "$tint/10000000" | bc -l))
|
|
echo "setting integration time to (s) " $tint_sec
|
|
sls_detector_put exptime $tint_sec
|
|
sls_detector_put start
|
|
sleep 4
|
|
done
|
|
|
|
|
|
# loop 4a
|
|
for tint in {50..100..5}
|
|
do
|
|
tint_sec=$(printf %.7f $(echo "$tint/1000000" | bc -l))
|
|
echo "setting integration time to (s) " $tint_sec
|
|
sls_detector_put exptime $tint_sec
|
|
sls_detector_put start
|
|
sleep 4
|
|
done
|
|
|
|
|
|
# loop 4b
|
|
for tint in {110..250..10}
|
|
do
|
|
tint_sec=$(printf %.7f $(echo "$tint/1000000" | bc -l))
|
|
echo "setting integration time to (s) " $tint_sec
|
|
sls_detector_put exptime $tint_sec
|
|
sls_detector_put start
|
|
sleep 4
|
|
done
|
|
|
|
|
|
echo "Finished scan"
|
|
sls_detector_put exptime 0.000010
|
|
sls_detector_put period 0.002
|
|
sls_detector_put frames 1000000
|
|
sls_detector_put currentsource 0
|
|
sls_detector_put highvoltage 0
|
|
echo "Script finished"
|
|
sleep 4
|
|
$KILLRCV
|